


LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


NAME
       latexmk - generate LaTeX document

SYNOPSIS
       latexmk [options] [file ...]

DESCRIPTION
       Latexmk completely automates the process of compiling a LaTeX document.
       Essentially, it is like a specialized  relative  of  the  general  make
       utility,  but  one  which determines dependencies automatically and has
       some other very useful features.  In its basic mode  of  operation  la-
       texmk  is given the name of the primary source file for a document, and
       it issues the appropriate sequence of commands to generate a .dvi, .ps,
       .pdf and/or hardcopy version of the document.

       By  default  latexmk will run the commands necessary to generate a .dvi
       file, which copies the behavior of earlier versions when only latex was
       available.

       Latexmk  can also be set to run continuously with a suitable previewer.
       In that case the latex program (or one of its relatives), etc, are  re-
       run whenever one of the source files is modified, and the previewer au-
       tomatically updates the on-screen view of the compiled document.

       Latexmk determines which are the source  files  by  examining  the  log
       file.  (Optionally, it also examines the list of input and output files
       generated by the -recorder option of  modern  versions  of  latex  (and
       pdflatex,  xelatex, lualatex).  See the documentation for the -recorder
       option of latexmk below.)  When latexmk is run, it examines  properties
       of  the source files, and if any have been changed since the last docu-
       ment generation, latexmk will run the various LaTeX processing programs
       as necessary.  In particular, it will repeat the run of latex (or a re-
       lated program)) often enough to resolve all cross references; depending
       on  the  macro  packages  used.   With some macro packages and document
       classes, four, or even more, runs may be needed. If necessary,  latexmk
       will  also  run  bibtex, biber, and/or makeindex.  In addition, latexmk
       can be configured to generate other necessary files.  For example, from
       an updated figure file it can automatically generate a file in encapsu-
       lated postscript or another suitable format for reading by LaTeX.

       Latexmk has two different previewing options.  With the simple -pv  op-
       tion,  a  dvi,  postscript  or pdf previewer is automatically run after
       generating the dvi, postscript or pdf version  of  the  document.   The
       type  of  file  to view is selected according to configuration settings
       and command line options.

       The second previewing option is the  powerful  -pvc  option  (mnemonic:
       "preview continuously").  In this case, latexmk runs continuously, reg-
       ularly monitoring all the source files to see if any have changed.  Ev-
       ery  time a change is detected, latexmk runs all the programs necessary
       to generate a new version of the document.  A good previewer will  then
       automatically update its display.  Thus the user can simply edit a file
       and, when the changes are written to disk, latexmk completely automates
       the  cycle  of  updating  the  .dvi (and/or the .ps and .pdf) file, and



                               18 November 2022                              1





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


       refreshing the previewer's display.  It's not quite WYSIWYG,  but  use-
       fully close.

       For  other previewers, the user may have to manually make the previewer
       update its display, which can be (e.g., with some versions of xdvi  and
       gsview) as simple as forcing a redraw of its display.

       Latexmk  has  the  ability  to print a banner in gray diagonally across
       each page when making the postscript file.  It  can  also,  if  needed,
       call  an  external  program to do other postprocessing on generated dvi
       and postscript files.  (See the options -dF and -pF, and the documenta-
       tion  for  the  $dvi_filter  and  $ps_filter  configuration variables.)
       These capabilities are leftover from older versions of latexmk, but are
       currently  non-functional.  More flexibility can be obtained in current
       versions, since the command strings for running *latex can now be  con-
       figured to run multiple commands.  This also extends the possibility of
       postprocessing generated files.

       Latexmk is highly configurable, both from the command line and in  con-
       figuration  files,  so  that  it can accommodate a wide variety of user
       needs and system configurations.  Default values are set  according  to
       the operating system, so latexmk often works without special configura-
       tion on MS-Windows, cygwin, Linux, OS-X, and other UNIX  systems.   See
       the  section  "Configuration/Initialization  (rc)  Files", and then the
       later sections "How to Set Variables in Initialization Files",  "Format
       of  Command Specifications", "List of Configuration Variables Usable in
       Initialization Files", "Custom Dependencies", and "Advanced  Configura-
       tion"

       A  very annoying complication handled very reliably by latexmk, is that
       LaTeX is a multiple pass system.  On each run, LaTeX reads in  informa-
       tion generated on a previous run, for things like cross referencing and
       indexing.  In the simplest cases, a second run of LaTeX  suffices,  and
       often  the log file contains a message about the need for another pass.
       However, there is a wide variety of add-on  macro  packages  to  LaTeX,
       with  a variety of behaviors.  The result is to break simple-minded de-
       terminations of how many runs are needed and of  which  programs.   La-
       texmk has a highly general and efficient solution to these issues.  The
       solution involves retaining between  runs  information  on  the  source
       files,  and a symptom is that latexmk generates an extra file (with ex-
       tension .fdb_latexmk, by default) that contains the source file  infor-
       mation.


LATEXMK OPTIONS AND ARGUMENTS ON COMMAND LINE
       In general the command line to invoke latexmk has the form

            latexmk [options] [file]

       All options can be introduced by single or double "-" characters, e.g.,
       "latexmk -help" or "latexmk --help".

       Note 1: In the documentation, '*latex' means any of the  supported  en-
       gines,  i.e., currently latex, lualatex, pdflatex, xelatex.  Mention of



                               18 November 2022                              2





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


       a specific one of these normally refers that specific engines.  Earlier
       versions  of  this documentation weren't so consistent.  Which of these
       is used to compile a document, depends on  the  configuration  and  the
       command line arguments.

       Note  2:  In  addition to the options in the list below, latexmk recog-
       nizes almost all the options recognized by the *latex programs in their
       current  TeXLive  and  MiKTeX implementations.  Some of the options for
       these programs trigger special action or behavior by latexmk, in  which
       case  they  have  specific  explanations in this document; in this case
       they may or may not be passed to *latex as well.

       Run latexmk with the -showextraoptions to get a  list  of  the  options
       that latexmk accepts and that are simply passed through to *latex.  See
       also the explanation of the -showextraoptions option for more  informa-
       tion.


       Definitions of options and arguments


       file   One  or more files can be specified.  If no files are specified,
              latexmk will, by default, run on all files in the current  work-
              ing  directory  with  a  ".tex" extension.  This behavior can be
              changed: see the description concerning the @default_files vari-
              able  in  the section "List of configuration variables usable in
              initialization files".

              If a file is specified without an extension, then the ".tex" ex-
              tension  is  automatically  added, just as LaTeX does.  Thus, if
              you specify:

                   latexmk foo

              then latexmk will operate on the file "foo.tex".

              There are certain restrictions on what characters can  be  in  a
              filename;  certain  characters are either prohibited or problem-
              atic for the latex etc programs.   These  characters  are:  "$",
              "%", "\", "~", the double quote character, and the control char-
              acters null, tab, form feed, carriage  return,  line  feed,  and
              delete.   In  addition  "&"  is  prohibited when it is the first
              character of a filename.

              Latexmk gives a fatal error when it detects  any  of  the  above
              characters in the TeX filename(s) specified on the command line.
              However before testing for illegal characters,  latexmk  removes
              matching  pairs  of double quotes from a filename.  This matches
              the behavior of latex etc, and deals with  problems  that  occa-
              sionally result from filenames that have been incorrectly quoted
              on the command line.  In addition, under Microsoft Windows,  the
              forward slash character "\" is a directory separator, so latexmk
              replaces it by a backward slash "/", which is also a  legal  di-
              rectory separator in Windows, and is accepted by latex etc.



                               18 November 2022                              3





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


       -auxdir=FOO or -aux-directory=FOO
              Sets  the  directory for auxiliary output files of *latex (.aux,
              .log etc).  See the description of the  $aux_dir  variable,  the
              -emulate-aux-dir,  and  the $emulate_aux variables for some com-
              plications in using this option with the TeX Live distribution.

              See  also  the  -outdir/-output-directory   options,   and   the
              $aux_dir,  $out_dir,  and  $search_path_separator  configuration
              variables of latexmk.  In particular, see the  documentation  of
              $out_dir  for  some  complications  on  what directory names are
              suitable.

              If you also use the -cd option, and the specified auxiliary out-
              put  directory  is a relative path, then the path is interpreted
              relative to the document directory.


       -bibtex
              When the source file uses bbl files for bibliography, run bibtex
              or biber as needed to regenerate the bbl files.

              This  property can also be configured by setting the $bibtex_use
              variable to 2 in a configuration file.


       -bibtex-
              Never run bibtex or biber.  Also, always  treat  .bbl  files  as
              precious, i.e., do not delete them in a cleanup operation.

              A  common  use  for this option is when a document comes from an
              external source, complete with its bbl  file(s),  and  the  user
              does  not  have  the corresponding bib files available.  In this
              situation use of the -bibtex- option will prevent  latexmk  from
              trying to run bibtex or biber, which would result in overwriting
              of the bbl files.

              This property can also be configured by setting the  $bibtex_use
              variable to 0 in a configuration file.


       -bibtex-cond
              When  the  source  file uses a bbl file for the bibliography and
              bibtex is used to  generate  the  bibliography,  run  bibtex  as
              needed  to  regenerate  the  bbl  files only if the relevant bib
              file(s) exist.  Thus when the bib  file(s)  are  not  available,
              bibtex is not run, thereby avoiding overwriting of the bbl file.
              Also, always treat .bbl files as precious, i.e., do  not  delete
              them in a cleanup operation.

              This  is the default setting.  It can also be configured by set-
              ting the $bibtex_use variable to 1 in a configuration file.

              The reason for using this setting is first  to  allow  automatic
              switching between the use and non-use of bibtex depending on the



                               18 November 2022                              4





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


              existence or not of a bib file.  In  addition,  when  submitting
              articles  to  a  scientific journal, it is common to submit only
              .tex and .bbl files (plus graphics files), but not a .bib  file.
              Hence  it  is  often  useful  to treat .bbl files as true source
              files, that should be preserved under a clean up operation.

              This property can also be configured by setting the  $bibtex_use
              variable to 1 in a configuration file.

              Note that when biber is used, and a bib file doesn't exist, this
              option does not currently prevent biber from being run.  See the
              documentation  on  $bibtex_use for more details.  However, a bbl
              file is treated as precious.


       -bibtex-cond1
              The same as -bibtex-cond except that .bbl files are only treated
              as precious if one or more bibfiles fails to exist.

              Thus  if all the bib files exist, bibtex is run to generate .bbl
              files as needed, and then it is appropriate to  delete  the  bbl
              files in a cleanup operation since they can be re-generated.

              This  property can also be configured by setting the $bibtex_use
              variable to 1.5 in a configuration file.

              Note that when biber is used, and a bib file doesn't exist, this
              option does not currently prevent biber from being run.  See the
              documentation on $bibtex_use for more details.


       -bibtexfudge or -bibfudge
              Turn on the change-directory fudge for bibtex.   See  documenta-
              tion of $bibtex_fudge for details.


       -bibtexfudge- or -bibfudge-
              Turn  off the change-directory fudge for bibtex.  See documenta-
              tion of $bibtex_fudge for details.


       -bm <message>
              A banner message to print diagonally across each page when  con-
              verting  the dvi file to postscript.  The message must be a sin-
              gle argument on the command line so be careful with quoting spa-
              ces and such.

              Note  that if the -bm option is specified, the -ps option is as-
              sumed.


       -bi <intensity>
              How dark to print the banner message.  A decimal number  between
              0 and 1.  0 is black and 1 is white.  The default is 0.95, which



                               18 November 2022                              5





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


              is OK unless your toner cartridge is getting low.


       -bs <scale>
              A decimal number that specifies how  large  the  banner  message
              will  be printed.  Experimentation is necessary to get the right
              scale for your message, as a rule of thumb the scale  should  be
              about  equal  to 1100 divided by the number of characters in the
              message.  The default is 220.0 which is just right for 5 charac-
              ter messages.


       -commands
              List the commands used by latexmk for processing files, and then
              exit.


       -c     Clean up (remove) all regeneratable files generated by latex and
              bibtex or biber except dvi, postscript and pdf.  These files are
              a combination of log files, aux files, latexmk's  database  file
              of  source file information, and those with extensions specified
              in the @generated_exts  configuration  variable.   In  addition,
              files specified by the $clean_ext and @generated_exts configura-
              tion variables are removed.

              This cleanup is instead of a regular make.  See the  -gg  option
              if you want to do a cleanup followed by a make.

              Treatment  of  .bbl files:  If $bibtex_use is set to 0 or 1, bbl
              files are always treated as non-regeneratable.   If  $bibtex_use
              is set to 1.5, bbl files are counted as non-regeneratable condi-
              tionally: If the bib file exists, then bbl files are  regenerat-
              able,  and are deleted in a clean up.  But if $bibtex_use is 1.5
              and a bib file doesn't exist, then the bbl files are treated  as
              non-regeneratable and hence are not deleted.

              In  contrast,  if  $bibtex_use is set to 2, bbl files are always
              treated as regeneratable, and are deleted in a cleanup.

              Treatment  of  files  generated  by  custom   dependencies:   If
              $cleanup_includes_cusdep_generated   is  nonzero,  regeneratable
              files are considered as including those generated by custom  de-
              pendencies  and are also deleted.  Otherwise these files are not
              deleted.


       -C     Clean up (remove) all regeneratable files generated by latex and
              bibtex or biber.  This is the same as the -c option with the ad-
              dition of dvi, postscript and pdf files, and those specified  in
              the $clean_full_ext configuration variable.

              This  cleanup  is instead of a regular make.  See the -gg option
              if you want to do a cleanup followed by a make.




                               18 November 2022                              6





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


              See the -c option for the specification of whether or  not  .bbl
              files are treated as non-regeneratable or regeneratable.

              If  $cleanup_includes_cusdep_generated is nonzero, regeneratable
              files are considered as including those generated by custom  de-
              pendencies  and are also deleted.  Otherwise these files are not
              deleted.


       -CA    (Obsolete).  Now equivalent to the -C option.  See  that  option
              for details.


       -cd    Change  to  the directory containing the main source file before
              processing it.  Then all the generated files (.aux, .log,  .dvi,
              .pdf, etc) will be relative to the source file.

              This  option is particularly useful when latexmk is invoked from
              a GUI configured to invoke latexmk with a full pathname for  the
              source file.

              This  option  works by setting the $do_cd configuration variable
              to one; you can set that variable if you want to  configure  la-
              texmk to have the effect of the -cd option without specifying it
              on the command line.  See the documentation for that variable.


       -cd-   Do NOT change to the directory containing the main  source  file
              before processing it.  Then all the generated files (.aux, .log,
              .dvi, .pdf, etc) will  be  relative  to  the  current  directory
              rather than the source file.

              This  is the default behavior and corresponds to the behavior of
              the *latex programs.  However, it is not desirable behavior when
              latexmk  is invoked by a GUI configured to invoke latexmk with a
              full pathname for the source file.  See the -cd option.

              This option works by setting the $do_cd  configuration  variable
              to  zero.   See the documentation for that variable for more in-
              formation.


       -CF    Remove the file containing the database of source file  informa-
              tion, before doing the other actions requested.


       -d     Set  draft  mode.  This prints the banner message "DRAFT" across
              your page when converting the dvi file to postscript.  Size  and
              intensity can be modified with the -bs and -bi options.  The -bm
              option will override this option as this is really just a  short
              way of specifying:

                   latexmk -bm DRAFT




                               18 November 2022                              7





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


              Note  that  if the -d option is specified, the -ps option is as-
              sumed.


       -deps  Show a list of dependent files after processing.  This is in the
              form  of a dependency list of the form used by the make program,
              and it is therefore suitable for use in a Makefile.  It gives an
              overall view of the files without listing intermediate files, as
              well as latexmk can determine them.

              By default the list of dependent files is sent to stdout  (i.e.,
              normally  to  the screen unless you've redirected latexmk's out-
              put). But you can set the filename where the list is sent by the
              -deps-out= option.

              See  the section "USING latexmk WITH make" for an example of how
              to use a dependency list with make.

              Users familiar with GNU automake and  gcc  will  find  that  the
              -deps  option  is very similar in its purpose and results to the
              -M option to gcc.  (In fact, latexmk also has options  -M,  -MF,
              and -MP options that behave like those of gcc.)


       -dependents
              Equivalent to -deps.


       -deps- Do  not  show a list of dependent files after processing.  (This
              is the default.)


       -dependents-
              Equivalent to -deps-.


       -deps-out=FILENAME
              Set the filename to which the list of dependent files  is  writ-
              ten.   If  the  FILENAME argument is omitted or set to "-", then
              the output is sent to stdout.

              Use of this option also turns on the output of the list  of  de-
              pendent files after processing.


       -dF    Dvi  file  filtering.   The  argument to this option is a filter
              which will generate a  filtered  dvi  file  with  the  extension
              ".dviF".   All  extra processing (e.g. conversion to postscript,
              preview, printing) will then be performed on this  filtered  dvi
              file.

              Example usage: To use dviselect to select only the even pages of
              the dvi file:




                               18 November 2022                              8





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


                   latexmk -dF "dviselect even" foo.tex


       -diagnostics
              Print detailed diagnostics during a run.  This may help for  de-
              bugging  problems  or to understand latexmk's behavior in diffi-
              cult situations.


       -dir-report
              For each .tex file processed, list the settings for aux and  out
              directories,  after  they have been normalized from the settings
              specified during initialization.  See  the  description  of  the
              variable $aux_out_dir_report for more details.


       -dir-report-
              Do  not  report  the settings for aux and out directories.  (De-
              fault)


       -dvi   Generate dvi version of document using latex.


       -dvilua
              Generate dvi version of document using lualatex instead  of  la-
              tex.


       -dvi-  Turn  off  generation of dvi version of document.  (This may get
              overridden, if some other file is made (e.g., a .ps  file)  that
              is  generated  from the dvi file, or if no generated file at all
              is requested.)


       -dvilualatex="COMMAND"
              This sets the string specifying the command to run dvi lualatex.
              It  behaves  like  the  -pdflatex  option, but sets the variable
              $dvilualatex.

              Note: This option when provided with the COMMAND  argument  only
              sets  the  command for invoking dvilualatex; it does not turn on
              the use of dvilualatex. That is done by other options or  in  an
              initialization file.


       -e <code>
              Execute  the  specified  initialization  code before processing.
              The code is Perl code of the same form as is used  in  latexmk's
              initialization  files.  For more details, see the information on
              the -r option, and the section about  "Configuration/initializa-
              tion  (RC)  files".  The code is typically a sequence of assign-
              ment statements separated by semicolons.




                               18 November 2022                              9





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


              The code is executed when the -e option  is  encountered  during
              latexmk's  parsing of its command line.  See the -r option for a
              way of executing initialization code from a file.  An error  re-
              sults  in latexmk stopping.  Multiple instances of the -r and -e
              options can be used, and they are executed in the order they ap-
              pear on the command line.

              Some care is needed to deal with proper quoting of special char-
              acters in the code on the command line.   For  example,  suppose
              you  want  to set the latex command to use its -shell-escape op-
              tion, then under UNIX/Linux you could use the line

                   latexmk -e '$latex=q/latex %O -shell-escape %S/' file.tex

              Note that the single  quotes  block  normal  UNIX/Linux  command
              shells  from  treating  the characters inside the quotes as spe-
              cial.  (In this example, the q/.../ construct is  a  Perl  idiom
              equivalent  to  using  single quotes.  This avoids the complica-
              tions of getting a quote  character  inside  an  already  quoted
              string  in  a  way that is independent of both the shell and the
              operating-system.)

              The above command line  will  NOT  work  under  MS-Windows  with
              cmd.exe  or  command.com  or 4nt.exe.  For MS-Windows with these
              command shells you could use

                   latexmk -e "$latex=q/latex %O -shell-escape %S/" file.tex

              or

                   latexmk -e "$latex='latex %O -shell-escape %S'" file.tex

              The last two examples will  NOT  work  with  UNIX/Linux  command
              shells.

              (Note:  the above examples show are to show how to use the -e to
              specify initialization code to be executed.  But the  particular
              effect can be achieved also by the use of the -latex option with
              less problems in dealing with quoting.)


       -emulate-aux-dir
              Emulate -aux-directory instead of leaving it to the *latex  pro-
              grams  to  do  it.  (MiKTeX supports -aux-directory, but TeXLive
              doesn't.)

              For more details see the explanation for the configuration vari-
              able $emulate_aux.


       -emulate-aux-dir-
              Turn  off  emulatation -aux-directory and leave it to the *latex
              program to handle the case that aux_dir is not equal to out_dir.
              Note  that  if  you  use  TeXLive,  which  doesn't support -aux-



                               18 November 2022                             10





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


              directory, latexmk will automatically switch  aux_dir  emulation
              on  after the first run of *latex, because it will find the .log
              file in the wrong place.


       -f     Force latexmk to continue document  processing  despite  errors.
              Normally, when latexmk detects that LaTeX or another program has
              found an error which will not be resolved by further processing,
              no further processing is carried out.

              Note:  "Further  processing" means the running of other programs
              or the rerunning of latex (etc) that would be done if no  errors
              had  occurred.   If instead, or additionally, you want the latex
              (etc) program not to pause for user input after  an  error,  you
              should  arrange this by an option that is passed to the program,
              e.g., by latexmk's option  -interaction=nonstopmode  (which  la-
              texmk passes to *latex).


       -f-    Turn off the forced processing-past-errors such as is set by the
              -f option.  This could be used to override a setting in  a  con-
              figuration file.


       -g     Force  latexmk  to process document fully, even under situations
              where latexmk would normally  decide  that  no  changes  in  the
              source  files have occurred since the previous run.  This option
              is useful, for example, if you change some options and  wish  to
              reprocess the files.


       -g-    Turn off -g.


       -gg    "Super go mode" or "clean make": clean out generated files as if
              -C had been given, and then do a regular make.


       -h or-non-help
              Print help information.


       -jobname=STRING
              Set the basename of output files(s) to STRING,  instead  of  the
              default,  which  is the basename of the specified TeX file.  (At
              present, STRING should not contain spaces.)

              This is like the same option for current implementations of  the
              *latex, and the passing of this option to these programs is part
              of latexmk's implementation of -jobname.

              There is one enhancement, that the STRING may contain the place-
              holder '%A'. This will be substituted by the basename of the TeX
              file.  The primary purpose is when multiple files are  specified



                               18 November 2022                             11





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


              on  the  command  line to latexmk, and you wish to use a jobname
              with a different file-dependent value for each file.  For  exam-
              ple, suppose you had .tex files test1.tex and test2.tex, and you
              wished to compare the results of compilation by *latex and those
              with xelatex.  Then under a unix-type operating system you could
              use the command line

                  latexmk -pdf -jobname=%A-pdflatex *.tex
                  latexmk -pdfxe -jobname=%A-xelatex *.tex

              Then the .aux, .log, and .pdf files from  the  use  of  pdflatex
              would  have  basenames  test1-pdflatex and test2-pdflatex, while
              from xelatex, the basenames would be test1-xelatex and test2-xe-
              latex.

              Under MS-Windows with cmd.exe, you would need to double the per-
              cent sign, so that the percent character is  passed  to  latexmk
              rather than being used to substitute an environment variable:

                  latexmk -pdf -jobname=%%A-pdflatex *.tex
                  latexmk -pdfxe -jobname=%%A-xelatex *.tex


       -l     Run in landscape mode, using the landscape mode for the preview-
              ers and the dvi to postscript converters.  This  option  is  not
              normally  needed nowadays, since current previewers normally de-
              termine this information automatically.


       -l-    Turn off -l.


       -latex This sets the generation of dvi files by latex,  and  turns  off
              the generation of pdf and ps files.

              Note:  to  set the command used when latex is specified, see the
              -latex="COMMAND" option.


       -latex="COMMAND"
              This sets the string specifying the command to run latex, and is
              typically  used  to  add desired options.  Since the string nor-
              mally contains spaces, it should be quoted, e.g.,

                   latexmk -latex="latex --shell-escape %O %S"  foo.tex

              The specification of the contents of the string are the same  as
              for  the $latex configuration variable.  Depending on your oper-
              ating system and the command-line shell you are using,  you  may
              need  to change the single quotes to double quotes (or something
              else).

              Note: This option when provided with the COMMAND  argument  only
              sets the command for invoking latex; it does not turn on the use



                               18 November 2022                             12





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


              of latex. That is done by other options or in an  initialization
              file.

              To set the command for running pdflatex (rather than the command
              for latex) see the -pdflatex option.


       -logfilewarninglist
              -logfilewarnings After a run of *latex, give a list of  warnings
              about  undefined citations and references (unless silent mode is
              on).

              See also the $silence_logfile_warnings configuration variable.


       -logfilewarninglist-
              -logfilewarnings- After a run of *latex, do not give a  list  of
              warnings about undefined citations and references.  (Default)

              See also the $silence_logfile_warnings configuration variable.


       -lualatex
              Use  lualatex.   That  is,  use  lualatex  to process the source
              file(s) to pdf.  The generation of dvi and postscript  files  is
              turned off.

              This option is equivalent to using the following set of options

                   -pdflua -dvi- -ps-

              (Note:  Note  that  the method of implementation of this option,
              but not its intended effect, differ from some  earlier  versions
              of latexmk.)


       -lualatex="COMMAND"
              This sets the string specifying the command to run lualatex.  It
              behaves like the -pdflatex option, but sets the variable $luala-
              tex.

              Note:  This  option when provided with the COMMAND argument only
              sets the command for invoking lualatex; it does not turn on  the
              use of lualatex. That is done by other options or in an initial-
              ization file.


       -M     Show list of dependent files after processing.  This is  equiva-
              lent to the -deps option.


       -MF file
              If  a  list of dependents is made, the -MF specifies the file to
              write it to.



                               18 November 2022                             13





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


       -MP    If a list of dependents is made, include a phony target for each
              source  file.  If you use the dependents list in a Makefile, the
              dummy rules work around errors the program make gives if you re-
              move header files without updating the Makefile to match.


       -makeindexfudge
              Turn  on the change-directory fudge for makeindex.  See documen-
              tation of $makeindex_fudge for details.


       -makeindexfudge-
              Turn off the change-directory fudge for makeindex.  See documen-
              tation of $makeindex_fudge for details.


       -MSWinBackSlash
              This option only has an effect when latexmk is running under MS-
              Windows.  This is that when latexmk runs a command under MS-Win-
              dows,  the  Windows  standard directory separator "\" is used to
              separate directory components in a file name.   Internally,  la-
              texmk  uses  "/" for the directory separator character, which is
              the character used by Unix-like systems.

              This is the default behavior.  However the default may have been
              overridden  by  a configuration file (latexmkrc file) which sets
              $MSWin_back_slash=0.


       -MSWinBackSlash-
              This option only has an effect when latexmk is running under MS-
              Windows.  This is that when latexmk runs a command under MS-Win-
              dows, the substitution of "\" for the  separator  character  be-
              tween  directory  components of a file name is not done. Instead
              the forward slash "/" is used, the same as on Unix-like systems.
              This is acceptable in most situations under MS-Windows, provided
              that filenames are properly quoted, as latexmk does by default.

              See   the   documentation   for   the   configuration   variable
              $MSWin_back_slash for more details.


       -new-viewer
              When  in  continuous-preview  mode, always start a new viewer to
              view the generated file.  By default, latexmk will, in  continu-
              ous-preview  mode,  test  for a previously running previewer for
              the same file and not start a new one if a previous previewer is
              running.  However, its test sometimes fails (notably if there is
              an already-running previewer that is viewing a file of the  same
              name  as  the current file, but in a different directory).  This
              option turns off the default behavior.






                               18 November 2022                             14





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


       -new-viewer-
              The inverse of the -new-viewer option.  It puts latexmk  in  its
              normal behavior that in preview-continuous mode it checks for an
              already-running previewer.


       -nobibtex
              Never run bibtex or biber.  Equivalent to the -bibtex- option.


       -nobibtexfudge or -nobibfudge
              Turn off the change-directory fudge for bibtex.  See  documenta-
              tion of $bibtex_fudge for details.


       -noemulate-aux-dir
              Turn aux_dir emulation off.  Same as -emulate-aux-dir-.


       -nomakeindexfudge
              Turn off the change-directory fudge for makeindex.  See documen-
              tation of $makeindex_fudge for details.


       -norc  Turn off the automatic reading of initialization (rc) files.

              N.B. Normally the initialization files are read and obeyed,  and
              then  command  line options are obeyed in the order they are en-
              countered.  But -norc is an exception to this rule: it is  acted
              on first, no matter where it occurs on the command line.


       -outdir=FOO or -output-directory=FOO

              Sets  the  directory  for  the  output  files  of  *latex.  This
              achieves its effect by the -output-directory option  of  *latex,
              which currently (Dec. 2011 and later) is implemented on the com-
              mon versions of *latex, i.e., MiKTeX and TeXLive.  It may not be
              present in other versions.

              See  also  the -auxdir/-aux-directory options, and the $aux_dir,
              $out_dir, and $search_path_separator configuration variables  of
              latexmk.   In  particular, see the documentation of $out_dir for
              some complications on what directory names are suitable.

              If you also use the -cd option, and the specified output  direc-
              tory  is  a relative path, then the path is interpreted relative
              to the document directory.


       -output-format=FORMAT
              This option is one that is  allowed  for  latex,  lualatex,  and
              pdflatex.  But  it is not passed to these programs.  Instead la-
              texmk emulates it in a way suitable for the context  of  latexmk



                               18 November 2022                             15





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


              and its workflows.

              If  FORMAT  is dvi, then dvi output is turned on, and postscript
              and pdf output are turned off. This is equivalent to  using  the
              options -dvi -ps- -pdf-.

              If  FORMAT  is  pdf,  then  pdf output is turned on, and dvi and
              postscript output are turned off. This is  equivalent  to  using
              the options -pdf -ps- -dvi-.

              If FORMAT is anything else, latexmk gives an error.


       -p     Print  out  the  document.  By default the file to be printed is
              the first in the list postscript, pdf, dvi that is  being  made.
              But you can use the -print=... option to change the type of file
              to be printed, and you can configure this in a start up file (by
              setting the $print_type variable).

              However,  printing  is  enabled by default only under UNIX/Linux
              systems, where the default is to use the lpr command and only on
              postscript files.  In general, the correct behavior for printing
              very much depends on your system's software.  In particular, un-
              der  MS-Windows you must have suitable program(s) available, and
              you must have configured the print  commands  used  by  latexmk.
              This  can  be  non-trivial.   See the documentation on the $lpr,
              $lpr_dvi, and $lpr_pdf configuration variables to see how to set
              the commands for printing.

              This option is incompatible with the -pv and -pvc options, so it
              turns them off.


       -pdf   Generate pdf version of document using pdflatex.  (If  you  wish
              to use lualatex or xelatex, you can use whichever of the options
              -pdflua, -pdfxe, -lualatex or -xelatex applies.)   To  configure
              latexmk  to  have  such  behavior by default, see the section on
              "Configuration/initialization (rc) files".


       -pdfdvi
              Generate dvi file and then pdf version of document from the  dvi
              file, by default using dvipdf.

              The  program used to compile the document to dvi is latex by de-
              fault, but this can be changed to dvilulatex by the use  of  the
              -dvilua option or by setting $dvi_mode to 2.


       -pdflua
              Generate pdf version of document using lualatex.


       -pdfps



                               18 November 2022                             16





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


              Generate dvi file, ps file from the dvi file,  and then pdf file
              from the ps file.

              The program used to compile the document to dvi is latex by  de-
              fault,  but  this can be changed to dvilulatex by the use of the
              -dvilua option or by setting $dvi_mode to 2.


       -pdfxe Generate pdf version of document using xelatex.   Note  that  to
              optimize  processing  time,  latexmk uses xelatex to generate an
              .xdv file rather than a pdf file directly.  Only after  possibly
              multiple  runs to generate a fully up-to-date .xdv file does la-
              texmk then call xdvipdfmx to generate the final .pdf file.

              (Note: The reason why latexmk arranges for xelatex  to  make  an
              .xdv  file instead of the xelatex's default of a .pdf file is as
              follows: When the document includes large graphics files,  espe-
              cially  .png  files,  the production of a .pdf file can be quite
              time consuming, even when the creation of the .xdv file by xela-
              tex  is  fast.  So the use of the intermediate .xdv file can re-
              sult in substantial gains in procesing time, since the .pdf file
              is produced once rather than on every run of xelatex.)


       -pdf-  Turn  off  generation  of pdf version of document.  (This can be
              used to override a setting in a configuration file.  It may  get
              overridden if some other option requires the generation of a pdf
              file.)

              If after all options have  been  processed,  pdf  generation  is
              still  turned  off, then generation of a dvi file will be turned
              on, and then the program used to compiled a document will be la-
              tex  (or,  more  precisely, whatever program is configured to be
              used in the $latex configuration variable).


       -pdflatex
              This sets the generation of pdf files by pdflatex, and turns off
              the generation of dvi and ps files.

              Note:  to  set  the command used when pdflatex is specified, see
              the -pdflatex="COMMAND" option.


       -pdflatex="COMMAND"
              This sets the string specifying the command to run pdflatex, and
              is typically used to add desired options.  Since the string nor-
              mally contains spaces, it should be quoted, e.g.,

                   latexmk  -pdf  -pdflatex="pdflatex  --shell-escape  %O  %S"
              foo.tex

              The  specification of the contents of the string are the same as
              for the $pdflatex configuration variable.  (The option -pdflatex



                               18 November 2022                             17





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


              in fact sets the variable $pdflatex.)  Depending on your operat-
              ing system and the command-line shell you  are  using,  you  may
              need  to change the single quotes to double quotes (or something
              else).

              Note: This option when provided with the COMMAND  argument  only
              sets  the command for invoking pdflatex; it does not turn on the
              use of pdflatex. That is done by other options or in an initial-
              ization file.

              To  set  the  command for running latex (rather than the command
              for pdflatex) see the -latex option.


       -pdflualatex="COMMAND"
              Equivalent to -lualatex="COMMAND".


       -pdfxelatex="COMMAND"
              Equivalent to -xelatex="COMMAND".


       -pretex=CODE

              Given that CODE is some TeX code, this options sets that code to
              be  executed  before  inputting source file.  This only works if
              the command for invoking the relevant *latex is suitably config-
              ured.   See the documentation of the variable $pre_tex_code, and
              the substitution strings %P and %U for more details.   This  op-
              tion works by setting the variable $pre_tex_code.

              See also the -usepretex option.

              An example:

                  latexmk  -pretex='\AtBeginDocument{Message\par}'  -usepretex
              foo.tex

              But this is better written

                  latexmk -usepretex='\AtBeginDocument{Message\par}' foo.tex

              If you already have a suitable command configured, you only need

                  latexmk -pretex='\AtBeginDocument{Message\par}' foo.tex


       -print=dvi, -print=ps, -print=pdf, -print=auto,
              Define which kind of file is printed.  This option also  ensures
              that the requisite file is made, and turns on printing.

              The (default) case -print=auto determines the kind of print file
              automatically from the set of files that  is  being  made.   The
              first  in  the list postscript, pdf, dvi that is among the files



                               18 November 2022                             18





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


              to be made is the one used for print out.


       -ps    Generate postscript version of document.


       -ps-   Turn off generation of postscript version of document.  This can
              be  used to override a setting in a configuration file.  (It may
              get overridden by some other option that requires  a  postscript
              file, for example a request for printing.)


       -pF    Postscript  file  filtering.   The  argument to this option is a
              filter which will generate a filtered postscript file  with  the
              extension ".psF".  All extra processing (e.g. preview, printing)
              will then be performed on this filtered postscript file.

              Example of usage: Use psnup to print two pages on the one page:

                   latexmk -ps -pF 'psnup -2' foo.tex

              or

                   latexmk -ps -pF "psnup -2" foo.tex

              Whether to use single or double quotes round the "psnup -2" will
              depend  on  your  command interpreter, as used by the particular
              version of perl and the operating system on your computer.


       -pv    Run file previewer.  If the -view option is used, this will  se-
              lect the kind of file to be previewed (.dvi, .ps or .pdf).  Oth-
              erwise the viewer views the "highest" kind of file selected,  by
              the  -dvi,  -ps,  -pdf,  -pdfps options, in the order .dvi, .ps,
              .pdf (low to high).  If no file type has been selected, the  dvi
              previewer will be used.  This option is incompatible with the -p
              and -pvc options, so it turns them off.


       -pv-   Turn off -pv.


       -pvc   Run a file previewer  and  continually  update  the  .dvi,  .ps,
              and/or .pdf files whenever changes are made to source files (see
              the Description above).  Which of these files is  generated  and
              which  is  viewed  is  governed by the other options, and is the
              same as for the -pv option.  The preview-continuous option  -pvc
              can  only work with one file.  So in this case you will normally
              only specify one filename on the command line.  It is  also  in-
              compatible  with  the  -p and -pv options, so it turns these op-
              tions off.

              The -pvc option also turns off force mode (-f), as  is  normally
              best  for  continuous  preview  mode.   If you really want force



                               18 November 2022                             19





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


              mode, use the options in the order -pvc -f.

              With a good previewer the display will be automatically updated.
              (Under  some but not all versions of UNIX/Linux "gv -watch" does
              this for postscript files; this can be set  by  a  configuration
              variable.   This would also work for pdf files except for an ap-
              parent bug in gv that causes an error when the newly updated pdf
              file is read.)  Many other previewers will need a manual update.

              Important note: the acroread program on MS-Windows locks the pdf
              file, and prevents new versions being written, so it  is  a  bad
              idea  to  use  acroread  to view pdf files in preview-continuous
              mode.  It is better to use a different  viewer:  SumatraPDF  and
              gsview are good possibilities.

              There  are  some  other methods for arranging an update, notably
              useful for many versions of xdvi and xpdf.  These are  best  set
              in latexmk's configuration; see below.

              Note  that  if  latexmk  dies  or  is  stopped  by the user, the
              "forked" previewer will continue to run.  Successive invocations
              with  the  -pvc option will not fork new previewers, but latexmk
              will normally use the existing previewer.  (At least  this  will
              happen  when  latexmk is running under an operating system where
              it knows how to determine whether an existing previewer is  run-
              ning.)


       -pvc-  Turn off -pvc.


       -pvctimeout
              Do  timeout  in pvc mode after period of inactivity, which is 30
              min. by default.  Inactivity means a period when latexmk has de-
              tected  no file changes and hence has not taken any actions like
              compiling the document.


       -pvctimeout-
              Don't do timeout in pvc mode after inactivity.


       -pvctimeoutmins=<time>
              Set period of inactivity in minutes for pvc timeout.


       -quiet Same as -silent


       -r <rcfile>
              Read the specified initialization file ("RC file")  before  pro-
              cessing.

              Be careful about the ordering: (1) Standard initialization files



                               18 November 2022                             20





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


              -- see the section below on  "Configuration/initialization  (RC)
              files"  --  are read first.  (2) Then the options on the command
              line are acted on in the order they are given.  Therefore if  an
              initialization  file  is  specified by the -r option, it is read
              during this second step.  Thus an initialization file  specified
              with the -r option can override both the standard initialization
              files and previously specified options.  But all of these can be
              overridden by later options.

              The contents of the RC file just comprise a piece of code in the
              Perl programming language (typically a  sequence  of  assignment
              statements); they are executed when the -r option is encountered
              during latexmk's parsing of its command line.  See the -e option
              for  a  way  of giving initialization code directly on latexmk's
              command line.  An error results in latexmk  stopping.   Multiple
              instances of the -r and -e options can be used, and they are ex-
              ecuted in the order they appear on the command line.


       -rc-report
              After initialization, give a list of the  RC  files  read.  (De-
              fault)


       -rc-report-
              After initialization, do not give a list of the RC files read.


       -recorder
              Give  the  -recorder  option with *latex.  In (most) modern ver-
              sions of these programs, this results in  a  file  of  extension
              .fls  containing  a  list  of the files that these programs have
              read and written.  Latexmk will then use this  file  to  improve
              its detection of source files and generated files after a run of
              *latex.  This is the default setting of latexmk, unless overrid-
              den in an initialization file.

              For further information, see the documentation for the $recorder
              configuration variable.


       -recorder-
              Do not supply the -recorder option with *latex.


       -rules Show a list of latemk's rules and dependencies after processing.


       -rules-
              Do not show a list of latexmk's  rules  and  dependencies  after
              processing.  (This is the default.)






                               18 November 2022                             21





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


       -showextraoptions
              Show  the  list of extra *latex options that latexmk recognizes,
              but that it simply passes through to the programs  *latex   when
              they  are  run.   These options are (currently) a combination of
              those allowed by the TeXLive and MiKTeX implementations.  (If  a
              particular  option is given to latexmk but is not handled by the
              particular implementation of *latex that  is  being  used,  that
              program  will  probably  give a warning or an error.)  These op-
              tions are very numerous, but are not listed in  this  documenta-
              tion because they have no effect on latexmk's actions.

              There  are a few options (e.g., -includedirectory=dir, -initial-
              ize, -ini) that are not recognized, either  because  they  don't
              fit  with  latexmk's  intended  operations, or because they need
              special processing by latexmk that isn't implemented (at  least,
              not yet).

              There  are  certain  options  for  *latex (e.g., -recorder) that
              trigger special actions or behavior by latexmk itself. Depending
              on  the  action,  they  may  also  be passed in some form to the
              called *latex program, and/or may affect other programs as well.
              These  options  do  have  entries  in this documentation.  Among
              these options are: -jobname=STRING, -aux-directory=dir, -output-
              directory=DIR, -quiet, and -recorder.

              There  are also options that are accepted by *latex, but instead
              trigger actions purely by latexmk: -help, -version.


       -silent
              Run commands silently, i.e., with options that reduce the amount
              of  diagnostics  generated.   For example, with the default set-
              tings, the command "latex -interaction=batchmode"  is  used  for
              latex, and similarly for its friends.

              See  also  the  -logfilewarninglist and -logfilewarninglist- op-
              tions.

              Also reduce the number of informational  messages  that  latexmk
              itself generates.

              To  change  the  options used to make the commands run silently,
              you need to configure latexmk with changed values of its config-
              uration    variables,    the    relevant    ones   being   $bib-
              tex_silent_switch, $biber_silent_switch,  $dvipdf_silent_switch,
              $dvips_silent_switch,      $dvilualatex_silent_switch,      $la-
              tex_silent_switch,       $lualatex_silent_switch        $makein-
              dex_silent_switch,     $pdflatex_silent_switch,    and    $xela-
              tex_silent_switch


       -stdtexcmds
              Sets the commands for latex, etc, so that they are the  standard
              ones. This is useful to override special configurations.



                               18 November 2022                             22





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


              The  result  is  that  $latex = 'latex %O %S', and similarly for
              $pdflatex, $lualatex, and $xelatex.  (The option -no-pdf  needed
              for $xelatex is provided automatically, given that %O appears in
              the definition.)


       -time  Show  CPU  time  used.   See  also  the  configuration  variable
              $show_time.


       -time- Do  not show CPU time used.  See also the configuration variable
              $show_time.


       -use-make
              When after a run of *latex, there  are  warnings  about  missing
              files  (e.g.,  as  requested  by the LaTeX \input, \include, and
              \includgraphics commands), latexmk tries to make them by a  cus-
              tom  dependency. If no relevant custom dependency with an appro-
              priate source file is found, and if the -use-make option is set,
              then  as  a last resort latexmk will try to use the make program
              to try to make the missing files.

              Note that the filename may be specified  without  an  extension,
              e.g.,  by  \includegraphics{drawing}  in  a LaTeX file.  In that
              case, latexmk will try making drawing.ext with ext set  in  turn
              to  the  possible  extensions that are relevant for latex (or as
              appropriate pdflatex, lualatex, xelatex).

              See also the documentation for  the  $use_make_for_missing_files
              configuration variable.


       -use-make-
              Do  not use the make program to try to make missing files.  (De-
              fault.)


       -usepretex
              Sets the command lines for latex, etc, so that they use the code
              that  is defined by the variable $pre_tex_code or that is set by
              the option -pretex=CODE to execute the specified TeX code before
              the  source  file  is  read.  This option overrides any previous
              definition of the command lines.

              The result is that $latex = 'latex %O  %P',  and  similarly  for
              $pdflatex,  $lualatex, and $xelatex.  (The option -no-pdf needed
              for $xelatex is provided automatically, given that %O appears in
              the definition.)


       -usepretex=CODE
              Equivalent to -pretex=CODE -usepretex.  Example




                               18 November 2022                             23





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


                latexmk -usepretex='\AtBeginDocument{Message\par}' foo.tex


       -v or -version
              Print version number of latexmk.


       -verbose
              Opposite of -silent.  This is the default setting.


       -view=default, -view=dvi, -view=ps, -view=pdf, -view=none
              Set the kind of file used when previewing is requested (e.g., by
              the -pv or -pvc switches).  The default is to view the "highest"
              kind  of  requested  file  (in  the low-to-high order .dvi, .ps,
              .pdf).

              Note the possibility -view=none where no  viewer  is  opened  at
              all.   One example of is use is in conjunction with the -pvc op-
              tion, when you want latexmk to do  a  compilation  automatically
              whenever  source  file(s) change, but do not want a previewer to
              be opened.


       -Werror
              This causes latexmk to return a non-zero status code if  any  of
              the  files  processed  gives a warning about problems with cita-
              tions or references (i.e., undefined citations or references  or
              about  multiply  defined references).  This is after latexmk has
              completed all the runs it needs to try  and  resolve  references
              and  citations.  Thus -Werror causes latexmk to treat such warn-
              ings as errors, but only when they occur on the last run of *la-
              tex  and  only after processing is complete.  Also can be set by
              the configuration variable $warnings_as_errors.


       -xdv   Generate xdv version of document using xelatex.


       -xelatex
              Use xelatex.  That is, use xelatex to process the source file(s)
              to  pdf.   The  generation of dvi and postscript files is turned
              off.

              This option is equivalent to using the following set of options

                   -pdfxe -dvi- -ps-

              [Note: Note that the method of implementation  of  this  option,
              but  not  its  intended primary effect, differ from some earlier
              versions of latexmk. Latexmk first uses xelatex to make an  .xdv
              file,  and  does  all  the extra runs needed (including those of
              bibtex, etc).  Only after that does it make the  pdf  file  from
              the  .xdv  file, using xdvipdfmx.  See the documentation for the



                               18 November 2022                             24





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


              -pdfxe for why this is done.]


       -xelatex="COMMAND"
              This sets the string specifying the command to run xelatex.   It
              sets the variable $xelatex.

              Warning: It is important to ensure that the -no-pdf is used when
              xelatex is invoked, since latexmk expects xelatex to produce  an
              .xdv  file,  not  a  .pdf file. If you provide %O in the command
              specification, this will be done automatically.  See  the  docu-
              mentation  for  the  -pdfxe  option for why latexmk makes a .xdv
              file rather than a .pdf file when xelatex is used.

              An example of the use of the -pdfxelatex option:

                   latexmk -pdfxe -pdfxelatex="xelatex --shell-escape  %O  %S"
              foo.tex

              Note:  This  option when provided with the COMMAND argument only
              sets the command for invoking lualatex; it does not turn on  the
              use of lualatex. That is done by other options or in an initial-
              ization file.


       Compatibility between options

       The preview-continuous option -pvc can only work with one file.  So  in
       this  case  you  will normally only specify one filename on the command
       line.

       Options -p, -pv and -pvc are mutually exclusive.  So each of these  op-
       tions turns the others off.


EXAMPLES
       % latexmk thesis    # run latex enough times to resolve
                           cross-references

       % latexmk -pvc -ps thesis# run latex enough times to resolve
                           cross-references, make a postscript
                           file, start a previewer.  Then
                           watch for changes in the source
                           file thesis.tex and any files it
                           uses.  After any changes rerun latex
                           the appropriate number of times and
                           remake the postscript file.  If latex
                           encounters an error, latexmk will
                           keep running, watching for
                           source file changes.

       % latexmk -c        # remove .aux, .log, .bbl, .blg, .dvi,
                           .pdf, .ps & .bbl files




                               18 November 2022                             25





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


DEALING WITH ERRORS, PROBLEMS, ETC
       Some possibilities:

       a.  If you get a strange error, do look carefully at the output that is
       on the screen and in log files.  While there is much  that  is  notori-
       ously verbose in the output of latex (and that is added to by latexmk),
       the verbosity is there for a reason: to enable  the  user  to  diagnose
       problems.   Latexmk  does repeat some messages at the end of a run that
       it thinks would otherwise be easy to miss in the middle of  other  out-
       put.

       b. Generally, remember that latexmk does its work by running other pro-
       grams.  Your first priority in dealing with errors should be to examine
       what went wrong with the individual programs.  Then you need to correct
       the causes of errors in the runs of these programs.  (Often these  come
       from  errors in the source document, but they could also be about miss-
       ing LaTeX packages, etc.)

       c. If latexmk doesn't run the programs the way you would like, then you
       need  to look in this documentation at the list of command line options
       and then at the sections on configuration/initialization files.  A  lot
       of  latexmk's  behavior  is configurable to deal with particular situa-
       tions.  (But there is a lot of reading!)

       The remainder of these notes consists of ideas for  dealing  with  more
       difficult situations.

       d.  Further tricks can involve replacing the standard commands that la-
       texmk runs by other commands or scripts.

       e. For possible examples of code for use in an RC file, see the  direc-
       tory   example_rcfiles   in  the  distribution  of  latexmk  (e.g.,  at
       http://mirror.ctan.org/support/latexmk/example_rcfiles).  Even if these
       examples don't do what you want, they may provide suitable inspiration.

       f.  There's  a  useful trick that can be used when you use lualatex in-
       stead of pdflatex (and in some related  situations).   The  problem  is
       that  latexmk won't notice a dependency on a file, bar.baz say, that is
       input by the lua code in your document instead of by  the  LaTeX  part.
       (Thus  if you change bar.baz and rerun latexmk, then latexmk will think
       no files have changed and not rerun lualatex, whereas if you had  '\in-
       put{bar.baz}'  in  the LaTeX part of the document, latexmk would notice
       the change.)  One solution is just to put the  following  somewhere  in
       the LaTeX part of the document:

                     \typeout{(bar.baz)}

       This  puts  a  line in the log file that latexmk will treat as implying
       that the file bar.baz was read.  (At present I don't know a way of  do-
       ing  this automatically.)  Of course, if the file has a different name,
       change bar.baz to the name of your file.

       g. See also the section "Advanced Configuration: Some extra resources".




                               18 November 2022                             26





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


       h.   Look   on   tex.stackexchange,   i.e.,   at    http://tex.stackex-
       change.com/questions/tagged/latexmk   Someone  may  have already solved
       your problem.

       i. Ask a question at tex.stackexchange.com.

       j. Or ask me (the author of latexmk).  My e-mail is at the end of  this
       documentation.



ALLOWING FOR CHANGE OF OUTPUT FILE TYPE
       When one of the latex engines is run, the usual situation is that latex
       produces a .dvi file, while pdflatex and lualatex produce a .pdf  file.
       For xelatex the default is to produce a .pdf file, but to optimize pro-
       cessing time latexmk runs xelatex its -no-pdf option so  that  it  pro-
       duces  an  .xdv  file.   Further  processing by latexmk takes this as a
       starting point.

       However, the actual output file may differ from the normal expectation;
       and  then  latexmk can adjust its processing to accommodate this situa-
       tion.  The difference in output file type can happen for  two  reasons:
       One  is  that  for latex, pdflatex and lualatex the document itself can
       override the defaults. The other is that there may be a  configuration,
       or misconfiguration, such that the program that latexmk invokes to com-
       pile the document is not the expected one, or is given  options  incom-
       patible with what latexmk initially expects.

       Under  latex and pdflatex, control of the output format by the document
       is done by setting the \pdfoutput macro.  Under lualatex, the  \output-
       mode macro is used instead.

       One example of an important use-case for document control of the output
       format is a document that uses the psfrag package to  insert  graphical
       elements in the output file. The psfrag package achieves its effects by
       inserting postscript code in the output of the compilation of the docu-
       ment.   This entails the use of compilation to a .dvi file, followed by
       the use of conversion to a postscript  file  (either  directly,  as  by
       dvips  or  implicitly,  as an intermediate step by dvipdf).  Then it is
       useful to force output to be of the .dvi format by  inserting  \pdfout-
       put=0 in the preamble of the document.

       Another  example  is where the document uses graphics file of the .pdf,
       .jpg, and png types.  With the default setting for the  graphicx  pack-
       age,  these can be processed in compilation to .pdf but not with compi-
       lation to .dvi.  In this case, it is useful to insert  \pdfoutput=1  in
       the  preamble  of the document to force compilation to .pdf output for-
       mat.

       In all of these cases, it is needed that latexmk has to adjust its pro-
       cessing  to  deal with a mismatch between the actual output format (out
       of .pdf, .dvi, .xdv) and the initially expected  output,  if  possible.
       Latexmk does this provided the following conditions are met.




                               18 November 2022                             27





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


       The first is that latexmk's $allow_switch configuration variable is set
       to a non-zero value as it is by default.  If this variable is  zero,  a
       mismatch of filetypes in the compilation results in an error.

       The  second condition for latexmk to be able to handle a change of out-
       put type is that no explicit requests for .dvi or .ps output files  are
       made.    Explicit  requests  are  by  the  -dvi  and  -ps,  -print=dvi,
       -print=ps, -view=dvi, and -view=ps options, and by  corresponding  set-
       tings  of  the $dvi_mode, $postscript_mode, $print_type, and $view con-
       figuration variables.  The print-type and view-type  restrictions  only
       apply when printing and viewing are explicitly requested, respectively.
       For this purpose, the use of the -pdfdvi and -pdfps  options  (and  the
       corresponding  setting  of the $pdf_mode variable) does not count as an
       explicit request for the .dvi and .ps files; they are  merely  regarded
       as  a  request for making a .pdf file together with an initial proposal
       for the processing route to make it.

       Note that when accommodating a change in output file type, there is in-
       volved  a  substantial change in the network of rules that latexmk uses
       in its actions.  The second condition applied to accommodate  a  change
       is to avoid situations where the change in the rule network is too rad-
       ical to be readily handled automatically.



CONFIGURATION/INITIALIZATION (RC) FILES
       In this section is explained which configuration files are read by  la-
       texmk.  Subsequent  sections  "How  to  Set Variables in Initialization
       Files", "Format of  Command  Specifications",  "List  of  Configuration
       Variables  Usable  in Initialization Files", "Custom Dependencies", and
       "Advanced Configuration" give details on what  can  be  configured  and
       how.

       Latexmk can be customized using initialization files, which are read at
       startup in the following order:

       1) The system RC file, if it exists.
          On a UNIX system, latexmk searches the following directories for a
          system RC file, which may be named either "LatexMk" or  "latexmkrc".
       The
          directories are searched in the following order, and latexmk uses
          the first such file it finds (if any):
          "/etc",
          "/opt/local/share/latexmk",
          "/usr/local/share/latexmk",
          "/usr/local/lib/latexmk".
          On a MS-Windows system it looks just in "C:\latexmk".
          On  a cygwin system (i.e., a MS-Windows system in which Perl is that
       of cygwin), latexmk looks in the directories
          "/cygdrive/c/latexmk",
          "/etc",
          "/opt/local/share/latexmk",
          "/usr/local/share/latexmk",
          "/usr/local/lib/latexmk".



                               18 November 2022                             28





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


       If the environment variable LATEXMKRCSYS is set, its value is  used  as
       the name of the system RC file, instead of any of the above.

       2) The user's RC file, if it exists.  This can be in one of two places.
       The traditional one is ".latexmkrc" in the user's home directory.   The
       other  possibility  is "latexmk/latexmkrc" in the user's XDG configura-
       tion home directory.  The actual file read is the first  of  "$XDG_CON-
       FIG_HOME/latexmk/latexmkrc"  or  "$HOME/.latexmkrc" which exists.  (See
       https://specifications.freedesktop.org/basedir-spec/basedir-spec-lat-
       est.html for details on the XDG Base Directory Specification.)

       Here  $HOME  is  the  user's  home  directory.  [Latexmk determines the
       user's home directory as follows:  It is the value of  the  environment
       variable  HOME,  if this variable exists, which normally is the case on
       UNIX-like systems (including Linux and OS-X).  Otherwise  the  environ-
       ment  variable USERPROFILE is used, if it exists, which normally is the
       case on MS-Windows systems. Otherwise a blank string is used instead of
       $HOME, in which case latexmk does not look for an RC file in it.]

       $XDG_CONFIG_HOME  is  the  value  of  the environment variable XDG_CON-
       FIG_HOME if it exists.  If this environment variable  does  not  exist,
       but  $HOME  is  non-blank,  then $XDG_CONFIG_HOME is set to the default
       value of $HOME/.config.  Otherwise $XDG_CONFIG_HOME is blank,  and  la-
       texmk does not look for an RC file under it.


       3)  The  RC  file  in  the current working directory.  This file can be
       named either "latexmkrc" or ".latexmkrc", and the first of these to  be
       found is used, if any.

       4) Any RC file(s) specified on the command line with the -r option.

       Each RC file is a sequence of Perl commands.  Naturally, a user can use
       this in creative ways.  But for most purposes, one simply  uses  a  se-
       quence of assignment statements that override some of the built-in set-
       tings of Latexmk.  Straightforward cases can be handled without  knowl-
       edge  of  the  Perl  language by using the examples in this document as
       templates.  Comment lines are introduced by the "#" character.

       Note that command line options are obeyed in the order  in  which  they
       are written; thus any RC file specified on the command line with the -r
       option can override previous options but can be  itself  overridden  by
       later  options on the command line.  There is also the -e option, which
       allows initialization code to be specified in latexmk's command line.

        For possible examples of code for in an RC file, see the directory ex-
       ample_rcfiles  in  the  distribution  of  latexmk (e.g., at http://mir-
       ror.ctan.org/support/latexmk/example_rcfiles).


HOW TO SET VARIABLES IN INITIALIZATION FILES
       The important variables that can be configured  are  described  in  the
       section  "List  of  configuration  variables  usable  in initialization
       files".  (See the earlier  section  "Configuration/Initialization  (rc)



                               18 November 2022                             29





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


       Files"  for  the  files where the configurations are done.)  Syntax for
       setting these variables is of the following forms:

                           $bibtex = 'bibtex %O %S';

       for the setting of a string variable,

                           $preview_mode = 1;

       for the setting of a numeric variable, and

                           @default_files = ('paper', 'paper1');

       for the setting of an array of strings.  It is possible  to  append  an
       item to an array variable as follows:

                           push @default_files, 'paper2';

       Note  that  simple  "scalar"  variables  have names that begin with a $
       character and array variables have names that begin with a @ character.
       Each statement ends with a semicolon.

       Strings  should  be  enclosed  in single quotes.  (You could use double
       quotes, as in many programming languages.  But then the  Perl  program-
       ming  language  brings  into  play some special rules for interpolating
       variables into strings.  People not fluent in Perl will want  to  avoid
       these complications.)

       You  can do much more complicated things, but for this you will need to
       consult a manual for the Perl programming language.




FORMAT OF COMMAND SPECIFICATIONS
       Some of the variables set the commands that latexmk uses  for  carrying
       out  its  work, for example to generate a .dvi file from a .tex file or
       to view a postscript file.  This section describes some important  fea-
       tures of how the commands are specified.  (Note that some of the possi-
       bilities listed here do not apply to the $kpsewhich variable;  see  its
       documentation.)

       Placeholders:  Supposed you wanted latexmk to use the command elatex in
       place of the regular latex  command,  and  suppose  moreover  that  you
       wanted  to  give  it the option "--shell-escape".  You could do this by
       the following setting:

            $latex = 'elatex --shell-escape %O %S';

       The two items starting with the % character  are  placeholders.   These
       are  substituted by appropriate values before the command is run.  Thus
       %S will be replaced by the source file that elatex will be applied  to,
       and  %O will be replaced by any options that latexmk has decided to use
       for this command.  (E.g.,  if  you  used  the  -silent  option  in  the



                               18 November 2022                             30





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


       invocation of latexmk,  it results in the replacement of %O by "-inter-
       action=batchmode".)

       The available placeholders are:

       %A     basename of the main tex file.  Unlike %R, this is unaffected by
              the setting of a jobname by  the -jobname option or the $jobname
              configuration value.

       %B     base of filename for current command.   E.g.,  if  a  postscript
              file  document.ps  is being made from the dvi file document.dvi,
              then the basename is document.

       %D     destination file (e.g., the name of  the  postscript  file  when
              converting a dvi file to postscript).

       %O     options

       %P     If  the  variable $pre_tex_code is non-empty, then %P is substi-
              tuted  by  the  contents  of  $pre_tex_code  followed  by   \in-
              put{SOURCE},  where  SOURCE  stands  for  the name of the source
              file.  Appropriate quoting is done.  This enables TeX code to be
              passed  to  one  of the *latex engines to be executed before the
              source file is read.

              If the variable $pre_tex_code is the empty string,  then  %P  is
              equivalent to %S.

       %R     root filename.  This is the base name for the main tex file.

              By  default  this is the basename of the main tex file.  However
              the value can be changed by the use of the  -jobname  option  or
              the $jobname configuration variable.

       %S     source  file  (e.g.,  the name of the dvi file when converting a
              .dvi file to ps).

       %T     The name of the primary tex file.

       %U     If the variable $pre_tex_code is non-empty, then  its  value  is
              substituted  for %U (appropriately quoted).  Otherwise it is re-
              placed by a null string.

       %Y     Name of directory for auxiliary output files (see the configura-
              tion variable $aux_dir).  A directory separation character ('/')
              is appended if $aux_dir is non-empty and does not end in a suit-
              able character, with suitable characters being those appropriate
              to UNIX and MS-Windows, i.e., ':', '/' and '\'.   Note  that  if
              after  initialization,  $out_dir is set, but $aux_dir is not set
              (i.e., it is blank), then latexmk  sets  $aux_dir  to  the  same
              value $out_dir.

       %Z     Name  of directory for output files (see the configuration vari-
              able $out_dir).   A  directory  separation  character  ('/')  is



                               18 November 2022                             31





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


              appended if $out_dir is non-empty and does not end in a suitable
              character, with suitable characters being those  appropriate  to
              UNIX and MS-Windows, i.e., ':', '/' and '\'.

       If  for  some  reason you need a literal % character in your string not
       subject to the above rules, use "%%".

       Appropriate quoting will be applied to the filename  substitutions,  so
       you  mustn't  supply them yourself even if the names of your files have
       spaces in them.  (But if your TeX filenames have spaces in them, beware
       that  some  older  versions  of the TeX program cannot correctly handle
       filenames containing spaces.)  In case latexmk's quoting does not  work
       correctly  on your system, you can turn it off -- see the documentation
       for the variable $quote_filenames.

       See the default values in the section "List of configuration  variables
       usable in initialization files" for what is normally the most appropri-
       ate usage.

       If you omit to supply any placeholders whatever in the specification of
       a  command,  latexmk will supply what its author thinks are appropriate
       defaults.  This gives compatibility with configuration files for previ-
       ous versions of latexmk, which didn't use placeholders.

       "Detaching"  a  command: Normally when latexmk runs a command, it waits
       for the command to run to completion.  This is appropriate for commands
       like latex, of course.  But for previewers, the command should normally
       run detached, so that latexmk gets the previewer running and  then  re-
       turns  to  its next task (or exits if there is nothing else to do).  To
       achieve this effect of detaching a command, you  need  to  precede  the
       command name with "start ", as in

            $dvi_previewer = 'start xdvi %O %S';

       This  will  be translated to whatever is appropriate for your operating
       system.

       Notes: (1) In some circumstances, latexmk will always run a command de-
       tached.   This  is the case for a previewer in preview continuous mode,
       since otherwise previewing continuously makes no sense.  (2) This  pre-
       cludes  the  possibility  of running a command named start.  (3) If the
       word start occurs more than  once  at  the  beginning  of  the  command
       string,  that is equivalent to having just one.  (4) Under cygwin, some
       complications happen, since cygwin amounts to a complicated merging  of
       UNIX  and  MS-Windows.   See  the  source code for how I've handled the
       problem.

       Command names containing spaces: Under MS-Windows it is common that the
       name of a command includes spaces, since software is often installed in
       a subdirectory of "C:\Program Files".  Such command names should be en-
       closed in double quotes, as in

            $lpr_pdf  =  '"c:/Program  Files/Ghostgum/gsview/gsview32.exe"  /p
       %S';



                               18 November 2022                             32





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


            $pdf_previewer   =   'start   "c:/Program   Files/SumatraPDF/Suma-
       traPDF.exe" %O %S';
            $pdf_previewer  =  'start "c:/Program Files/SumatraPDF (x86)/Suma-
       traPDF.exe" %O %S';


       (Note about the above example: Under  MS-Windows  forward  slashes  are
       equivalent to backslashes in a filename under almost all circumstances,
       provided that the filename is inside double quotes.  It  is  easier  to
       use forward slashes in examples like the one above, since then one does
       not have to worry about the rules for dealing with forward  slashes  in
       strings in the Perl language.)

       Command  names  under  Cygwin: If latexmk is executed by Cygwin's Perl,
       be particularly certain that pathnames in commands have forward slashes
       not  the  usual  backslashes  for the separator of pathname components.
       See the above examples.  Backslashes often get  misinterpreted  by  the
       Unix shell used by Cygwin's Perl to execute external commands.  Forward
       slashes don't suffer from this problem, and (when quoted, as above) are
       equally acceptable to MS-Windows.

       Using  MS-Windows  file  associations: A useful trick under modern ver-
       sions of MS-Windows (e.g., WinXP) is to use just the command 'start' by
       itself:

            $dvi_previewer = 'start %S';

       Under MS-Windows, this will cause to be run whatever program the system
       has associated with dvi files.  (The  same  applies  for  a  postscript
       viewer and a pdf viewer.)  But note that this trick is not always suit-
       able for the pdf previwer, if your system has acroread for the  default
       pdf viewer.  As explained elsewhere, acroread under MS-Windows does not
       work well with latex and latexmk, because acroread locks the pdf file.

       Not using a certain command: If a command is not to be run, the command
       name NONE is used, as in

            $lpr  = 'NONE lpr';

       This  typically  is  used when an appropriate command does not exist on
       your system.  The string after the "NONE" is effectively a comment.

       Options to commands: Setting the name of a command can be used not only
       for changing the name of the command called, but also to add options to
       command.  Suppose you want latexmk to use latex  with  source  specials
       enabled.   Then  you  might use the following line in an initialization
       file:

            $latex = 'latex --src-specials %O %S';

       Running a subroutine instead of an external command: Use  a  specifica-
       tion starting with "internal", as in

            $latex = 'internal mylatex %O %S';



                               18 November 2022                             33





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


            sub mylatex {
                my @args = @_;
                # Possible preprocessing here
                return system 'latex', @args;
            }

       For  some  of the more exotic possibilities that then become available,
       see the section "ADVANCED CONFIGURATION: Some extra resources  and  ad-
       vanced  tricks".  Also  see some of the examples in the directory exam-
       ple_rcfiles in the latexmk distribution.

       Advanced tricks: Normally one specifies a single command for  the  com-
       mands  invoked by latexmk.  Naturally, if there is some complicated ad-
       ditional processing you need to do in your special situation,  you  can
       write a script (or batch file) to do the processing, and then configure
       latexmk to use your script in place of the standard program.

       You can also use a Perl subroutine instead of a script  --  see  above.
       This is generally the most flexible and portable solution.

       It is also possible to configure latexmk to run multiple commands.  For
       example, if when running pdflatex to generate a pdf  file  from  a  tex
       file you need to run another program after pdflatex to perform some ex-
       tra processing, you could do something like:

            $pdflatex = 'pdflatex --shell-escape  %O  %S;  pst2pdf_for_latexmk
       %B';

       This  definition  assumes  you  are using a UNIX-like system (which in-
       cludes Linux and OS-X), so that the two commands to be  run  are  sepa-
       rated by the semicolon in the middle of the string.

       If you are using MS-Windows, you would replace the above line by

          $pdflatex = 'cmd /c pdflatex --shell-escape %O %S'
                      . '&& pst2pdf_for_latexmk %B';

       Here,  the  UNIX  command  separator ; is replaced by &&.  In addition,
       there is a problem that some versions of Perl on MS-Windows do not obey
       the  command separator; this problem is overcome by explicitly invoking
       the MS-Windows command-line processor cmd.exe.


LIST OF CONFIGURATION VARIABLES USABLE IN INITIALIZATION FILES
       In this section are specified the variables whose  values  can  be  ad-
       justed  to  configure  latexmk.   (See  the earlier section "Configura-
       tion/Initialization (rc) Files" for the files where the  configurations
       are done.)

       Default values are indicated in brackets.  Note that for variables that
       are boolean in character, concerning whether latexmk does or  does  not
       behave  in a certain way, a non-zero value, normally 1, indicates true,
       i.e., the behavior occurs, while a zero value indicates a false  value,
       i.e., the behavior does not occur.



                               18 November 2022                             34





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


       $allow_switch [1]

              This  controls  what happens when the output extension of latex,
              pdflatex, lualatex or xelatex differs  from  what  is  expected.
              (The possible extensions are .dvi, .pdf, .xdv.)  This can happen
              with the use of the \pdfoutput macro in a document compiled  un-
              der  latex or pdflatex, or with the use of the \outputmode macro
              under lualatex.  It can also happen with certain kinds of incor-
              rect configuration.

              In  such a case, latexmk can appropriately adjust its network of
              rules.  The adjustment is made if $allow_switch is on, and if no
              request for a dvi or ps file has been made.

              See the section ALLOWING FOR CHANGE OF OUTPUT EXTENSION.


       $always_view_file_via_temporary [0]
              Whether  .ps and .pdf files are initially to be made in a tempo-
              rary directory and then moved to the final location.  (This  ap-
              plies to dvips, dvipdf, and ps2pdf operations, and the filtering
              operators on .dvi and .ps files.  It does not apply to pdflatex,
              unfortunately,  since  pdflatex  provides no way of specifying a
              chosen name for the output file.)

              This use of a temporary file solves a problem that the making of
              these files can occupy a substantial time.  If a viewer (notably
              gv) sees that the file has changed, it may read the new file be-
              fore the program writing the file has not yet finished its work,
              which  can cause havoc.

              See the $pvc_view_file_via_temporary variable for a setting that
              applies  only  if preview-continuous mode (-pvc option) is used.
              See $tmpdir for the setting of the directory where the temporary
              file is created.


       $analyze_input_log_always [1]

              After  a run of latex (etc), always analyze .log for input files
              in the <...> and (...) constructions.  Otherwise,  only  do  the
              analysis when fls file doesn't exist or is out of date.

              Under  normal  circumstances,  the data in the fls file is reli-
              able, and the test of the log file gets lots of false positives;
              usually  $analyze_input_log_always is best set to zero.  But the
              test of the log file is needed at least in the following  situa-
              tion:  When a user needs to persuade latexmk that a certain file
              is a source file, and latexmk doesn't otherwise find  it.   Then
              the  user  can  write  code  that causes a line with (...) to be
              written to log file.  One important case is for lualatex,  which
              doesn't  always  generate  lines  in the .fls file for input lua
              files.  (The situation with lualatex is  HIGHLY  version  depen-
              dent,  e.g.,  there  was  a  big change between TeXLive 2016 and



                               18 November 2022                             35





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


              TeXLive 2017.)

              To keep backward compatibility with older versions  of  latexmk,
              the default is to set $analyze_input_log_always to 1.


       $auto_rc_use [1]
              Whether  to  automatically read the standard initialization (rc)
              files, which are the system RC file, the user's RC file, and the
              RC file in the current directory.  The command line option -norc
              can be used to turn this setting off.  Each RC file  could  also
              turn  this  setting off, i.e., it could set $auto_rc_use to zero
              to prevent automatic reading of the later RC files.

              This variable does not affect the reading of RC files  specified
              on the command line by the -r option.

       $aux_dir [""]
              The directory in which auxiliary files (aux, log, etc) are to be
              written by a run of *latex.  If this variable is  not  set,  but
              $out_dir  is set, then $aux_dir is set to $out_dir, which is the
              directory to which general output files are to be written.

              Important note:  The default implementation of the aux dir is to
              give *latex the -aux-directory option.  But that only works with
              the MiKTeX distribution, not with  the  TeX  Live  distribution.
              Latexmk has an alternative implementation that avoids this prob-
              lem: See the description of -emulate-aux-dir option and the $em-
              ulate_aux variable for details.

              See also the documentation of $out_dir for some complications on
              what directory names are suitable.

              If you also use the -cd option, and $out_dir (or $aux_dir)  con-
              tains  a relative path, then the path is interpreted relative to
              the document directory.


       $aux_out_dir_report [0]
              For each .tex file processed, list the settings for aux and  out
              directories,  after  they have been normalized from the settings
              specified during initialization.

              This report gives a reminder of where to look for output.

              The report has to be done per file, because of  possible  direc-
              tory  changes  for each file.  In the simplest cases, the result
              is the same as originally specified.  In general, e.g., with  an
              absolute  directory  specified,  the normalization helps perfor-
              mance and cleans up output to the screen. It also avoids  situa-
              tions  where  a  file in the current directory is referred to by
              different names, e.g., "file.aux" and "./file.aux", which can be
              annoying.




                               18 November 2022                             36





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


       $bad_warning_is_error [0]
              Whether  to treat bad warnings reported by *latex in log file as
              errors. The  specifications  of  the  warning  messages  are  in
              @bad_warnings.


       @bad_warnings
              Array  of  regular  expressions  specifying messages in log file
              that are officially treated as warnings rather  than  errors  by
              *latex,  but  which  a  user may treat as errors: See $bad_warn-
              ing_is_error.

              Currently the default set of these warnings is those about  \end
              occuring inside constructs.


       $banner [0]
              If  nonzero, the banner message is printed across each page when
              converting the dvi file to postscript.   Without  modifying  the
              variable  $banner_message,  this is equivalent to specifying the
              -d option.

              Note that if $banner is nonzero, the $postscript_mode is assumed
              and the postscript file is always generated, even if it is newer
              than the dvi file.

       $banner_intensity [0.95]
              Equivalent to the -bi option, this is a decimal number between 0
              and  1 that specifies how dark to print the banner message. 0 is
              black, 1 is white.  The default is just right if your toner car-
              tridge isn't running too low.

       $banner_message ["DRAFT"]
              The banner message to print across each page when converting the
              dvi file to postscript.  This is equivalent to the -bm option.

       $banner_scale [220.0]
              A decimal number that specifies how  large  the  banner  message
              will  be printed.  Experimentation is necessary to get the right
              scale for your message, as a rule of thumb the scale  should  be
              about  equal  to 1100 divided by the number of characters in the
              message.  The Default is just right for  5  character  messages.
              This is equivalent to the -bs option.

       @BIBINPUTS
              This  is  an array variable, now mostly obsolete, that specifies
              directories where latexmk should look for .bib  files.   By  de-
              fault  it  is set from the BIBINPUTS environment variable of the
              operating system.  If that environment variable is  not  set,  a
              single  element list consisting of the current directory is set.
              The format of the directory names depends on your operating sys-
              tem, of course.  Examples for setting this variable are:

                      @BIBINPUTS = ( ".", "C:\\bibfiles" );



                               18 November 2022                             37





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


                      @BIBINPUTS = ( ".", "\\server\bibfiles" );
                      @BIBINPUTS = ( ".", "C:/bibfiles" );
                      @BIBINPUTS = ( ".", "//server/bibfiles" );
                      @BIBINPUTS = ( ".", "/usr/local/texmf/bibtex/bib" );

              Note  that  under  MS  Windows,  either a forward slash "/" or a
              backward slash "\" can be used to separate pathname  components,
              so  the  first  two  and the second two examples are equivalent.
              Each backward slash should be doubled to avoid running afoul  of
              Perl's rules for writing strings.

              Important note: This variable is now mostly obsolete in the cur-
              rent version of latexmk, since it has a better method of search-
              ing  for  files  using  the kpsewhich command.  However, if your
              system is an unusual one without the kpsewhich command, you  may
              need to set the variable @BIBINPUTS.

       $biber ["biber %O %S"]
              The biber processing program.

       $biber_silent_switch ["--onlylog"]
              Switch(es)  for the biber processing program when silent mode is
              on.

       $bibtex ["bibtex %O %S"]
              The BibTeX processing program.

       $bibtex_fudge [1]
              When using bibtex, whether to change directory to  $aux_dir  be-
              fore running bibtex.

              The need arises as follows:

              a.  With  bibtex  before about 2019, if the filename given to it
              contains a path component, there was a bug that bibtex would not
              find  extra  aux  files,  as produced by the \include command in
              TeX.

              b. With all moderately recent versions  of  bibtex,  bibtex  may
              refuse to write its bbl and blg files, for security reasons, for
              certain cases of the path component of the filename given to it.

              However, there are also rare cases  where  the  change-directory
              method  prevents  bibtex  from finding certain bib or bst files.
              Then $bibtex_fudge needs to be set to 0.


       $bibtex_silent_switch ["-terse"]
              Switch(es) for the BibTeX processing program when silent mode is
              on.

       $bibtex_use [1]
              Under what conditions to run bibtex or biber.  When latexmk dis-
              covers from the  log  file  that  one  (or  more)  bibtex/biber-



                               18 November 2022                             38





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


              generated  bibliographies  are  used, it can run bibtex or biber
              whenever it appears necessary to regenerate the bbl file(s) from
              their  source  bib  database  file(s).   But  sometimes, the bib
              file(s) are not available (e.g., for a document obtained from an
              external archive), but the bbl files are provided.  In that case
              use of bibtex or biber will result in incorrect  overwriting  of
              the  precious  bbl  files.   The  variable  $bibtex_use controls
              whether this happens, and also  controls  whether  or  not  .bbl
              files are deleted in a cleanup operation.

              The possible values of $bibtex_use are:
                0:  never  use  bibtex  or biber; never delete .bbl files in a
              cleanup.
                1: only use bibtex if the bib file(s) exist; never delete .bbl
              files in a cleanup.
                1.5:  only  use  bibtex  if the bib files exist; conditionally
              delete .bbl files in a cleanup (i.e., delete them only when  the
              bib files all exist).
                2: run bibtex or biber whenever it appears necessary to update
              the bbl file(s), without testing for the existence  of  the  bib
              files; always delete .bbl files in a cleanup.

              Important  note:  Currently,  the  values  1 and 1.5 do not work
              properly if the document uses  biber  instead  of  bibtex.  When
              biber  is used, the values 1 and 1.5 for $bibtex_use are equiva-
              lent to 2 as regards the running  of  biber.   (There's  a  long
              story  why  not.   Basically,  the problem is that when biber is
              used, latexmk only knows the names and status  of  the  bibfiles
              after  running biber.  In contrast, when bibtex is used, the in-
              formation is available after a run of *latex. It  is  a  problem
              for the future to correct this.)


       $cleanup_includes_cusdep_generated [0]
              If  nonzero,  specifies that cleanup also deletes files that are
              generated by custom dependencies.  (When doing a clean up, e.g.,
              by use of the -C option, custom dependencies are those listed in
              the .fdb_latexmk file from a previous run.)

       $cleanup_includes_generated [0]
              If nonzero, specifies that cleanup also deletes files  that  are
              detected in the fls file (or failing that, in log file) as being
              generated.  It will also include files  made  from  these  first
              generation generated files.

              This  operation  is  somewhat dangerous, and can have unintended
              consequences, since the files to be deleted are determined  from
              a  file  created by *latex, which can contain erroneous informa-
              tion. Therefore this variable is turned off by default, and then
              files to be deleted are restricted to those explicitly specified
              by   patterns   configured   in   the    variables    clean_ext,
              clean_full_ext, and @generated_exts.  Standard cases (e.g., .log
              files) appear in latexmk's initial value for the  array  @gener-
              ated_exts.



                               18 November 2022                             39





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


       $cleanup_mode [0]
              If  nonzero,  specifies  cleanup mode: 1 for full cleanup, 2 for
              cleanup except for .dvi, .ps and .pdf files, 3 for  cleanup  ex-
              cept  for  dep  and aux files.  (There is also extra cleaning as
              specified by the $clean_ext, $clean_full_ext and @generated_exts
              variables.)

              This  variable  is  equivalent to specifying one of the -c or -C
              options.  But there should be no need to set this variable  from
              an RC file.

       $clean_ext [""]
              Extra  extensions of files for latexmk to remove when any of the
              clean-up options (-c or -C) is  selected.   The  value  of  this
              variable is a string containing the extensions separated by spa-
              ces.

              It is also possible to specify a more general pattern of file to
              be deleted, by using the place holder %R, as in commands, and it
              is also possible to use wildcards.  Thus setting

                  $clean_ext  =  "out  %R-blx.bib  %R-figures*.log  pythontex-
              files-%R/*";

              in an initialization file will imply that when a clean-up opera-
              tion is specified,  not  only  is  the  standard  set  of  files
              deleted,  but  also files of the form FOO.out, FOO-blx.bib, FOO-
              figures*.log, and pythontex-files-FOO/*, where  FOO  stands  for
              the basename of the file being processed (as in FOO.tex).

              Most  of  the  files to be deleted are relative to the directory
              specified by $aux_dir.  Note that if $out_dir but  not  $aux_dir
              is  set, then in its initialization, latexmk sets $aux_dir equal
              to $out_dir.  A normal  situation  is  therefore  that  $aux_dir
              equals  $out_dir,  which  is the only case directly supported by
              TeXLive, unlike MiKTeX.  Note that  even  with  TeXLive  latexmk
              does now support different values for the directories -- see the
              explanation of the $emulate_aux variable.

              If $out_dir and $aux_dir different, latexmk actually deletes any
              files of the specified names in both $aux_dir and $out_dir; this
              is because under certain error conditions, the files may be  put
              in  $out_dir instead of $aux_dir.  This also handles the case of
              deleting any fls file, since that file is in $out_dir.

              The filenames specified for a clean-up operation can  refer  not
              only  to regular files but also to directories.  Directories are
              only deleted if they are empty.  An example of an application is
              to  pythontex,  which  creates  files in a particular directory.
              You can arrange to remove both the files and  the  directory  by
              setting

                  $clean_ext = "pythontex-files-%R pythontex-files-%R";




                               18 November 2022                             40





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


              See  also  the  (array)  variable @generated_exts.  In the past,
              this variable had certain uses beyond that of  $clean_ext.   But
              now,  they  accomplish the same things.  In fact, after initial-
              ization including the processing of command  line  options,  la-
              texmk simply appends the list of extensions in $clean_ext to the
              array @generated_exts.

       $clean_full_ext [""]
              Extra extensions of files for latexmk to remove when the -C  op-
              tion  is  selected, i.e., extensions of files to remove when the
              .dvi, etc files are to be cleaned-up.

              More general patterns are allowed, as for $clean_ext.

              The files specified by $clean_full_ext to be deleted  are  rela-
              tive to the directory specified by $out_dir.


       $compiling_cmd [""], $failure_cmd [""], $warning_cmd [""], $success_cmd
       [""]

              These variables specify commands that are  executed  at  certain
              points  of  compilations.  One motivation for their existence is
              to allow very useful convenient visual indications  of  compila-
              tion  status even when the window receiving the screen output of
              the compilation is hidden.  This is particularly useful in  pre-
              view-continuous mode.

              The  commands  are  executed  at  the following points: $compil-
              ing_cmd at the start of compilation, $success_cmd at the end  of
              a  completely successful compilation, $failure_cmd at the end of
              an unsuccessful compilation, $warning_cmd at the of an otherwise
              successful compilation that gives warnings about undefined cita-
              tions or references or about multiply defined references. If any
              of  above  variables  is  undefined or blank (the default situa-
              tion), then the corresponding command is not executed.

              However, when $warning_cmd is not set, then in  the  case  of  a
              compilation  with  warnings  about  references or citations, but
              with no other error, one or  other  of  $success_cmd  or  $fail-
              ure_cmd  is  used  (if  it  is  set) according to the setting of
              $warnings_as_errors.

              An example of a simple setting of these variables is as follows

                  $compiling_cmd = "xdotool search  --name  \"%D\"  set_window
              --name \"%D compiling\"";
                  $success_cmd    =  "xdotool  search --name \"%D\" set_window
              --name \"%D OK\"";
                  $warning_cmd   = "xdotool search --name \"%D\" ".
                                   "set_window --name \"%D CITE/REF ISSUE\"";
                  $failure_cmd   = "xdotool search  --name  \"%D\"  set_window
              --name \"%D FAILURE\"";




                               18 November 2022                             41





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


              These  assume  that  the  program xdotool is installed, that the
              previewer is using an X-Window system for display, and that  the
              title  of the window contains the name of the displayed file, as
              it normally does.  When the commands are  executed,  the  place-
              holder  string  %D  is  replaced  by the name of the destination
              file, which is the previewed file.  The above commands result in
              an appropriate string being appended to the filename in the win-
              dow title: " compiling", " OK", or " FAILURE".

              Other placeholders that can be used are %S, %T, and %R, with  %S
              and  %T normally being identical. These can be useful for a com-
              mand changing the title of the edit window. The  visual  indica-
              tion  in a window title can useful, since the user does not have
              to keep shifting attention to the (possibly hidden)  compilation
              window to know the status of the compilation.

              More  complicated  situations  can best be handled by defining a
              Perl subroutine to invoke the necessary commands, and using  the
              "internal"  keyword  in the definitions to get the subroutine to
              be invoked.  (See the section "Format of Command Specifications"
              for how to do this.)

              Naturally,  the  above  settings that invoke the xdotool program
              are only applicable when the X-Window system  is  used  for  the
              relevant window(s).  For other cases, you will have to find what
              software solutions are available.


       @cus_dep_list [()]
              Custom dependency list -- see section on "Custom Dependencies".

       @default_excluded_files [()]
              When latexmk is invoked with no files specified on  the  command
              line, then, by default, it will process all files in the current
              directory with the extension .tex.  (In general, it will process
              the files specified in the @default_files variable.)

              But sometimes you want to exclude particular files from this de-
              fault list.  In that case you can specify the excluded files  in
              the array @default_excluded_files.  For example if you wanted to
              process all .tex files with the exception of  common.tex,  which
              is a not a standard alone LaTeX file but a file input by some or
              all of the others, you could do

                   @default_files = ("*.tex");

                   @default_excluded_files = ("common.tex");

              If you have a variable or large number of files to be processed,
              this method saves you from having to list them in detail in @de-
              fault_files and having to update the list every time you  change
              the set of files to be processed.

              Notes:  1.  This variable has no effect except when no files are



                               18 November 2022                             42





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


              specified on the latexmk command line.  2. Wildcards are allowed
              in @default_excluded_files.

       @default_files [("*.tex")]
              Default list of files to be processed.

              If  no filenames are specified on the command line, latexmk pro-
              cesses all tex files specified in the  @default_files  variable,
              which  by  default is set to all tex files ("*.tex") in the cur-
              rent directory.  This is a convenience: just run latexmk and  it
              will  process  an  appropriate  set of files.  But sometimes you
              want only some of these files to be processed.  In this case you
              can  list the files to be processed by setting @default_files in
              an initialization file (e.g., the file "latexmkrc" in  the  cur-
              rent  directory).  Then if no files are specified on the command
              line then the files you specify by  setting  @default_files  are
              processed.

              Three examples:

                   @default_files = ("paper_current");

                   @default_files = ("paper1", "paper2.tex");

                   @default_files = ("*.tex", "*.dtx");

              Note  that more than file may be given, and that the default ex-
              tension is ".tex".  Wild cards are allowed.  The parentheses are
              because @default_files is an array variable, i.e., a sequence of
              filename specifications is possible.

              If you want latexmk to process all .tex files with a few  excep-
              tions, see the @default_excluded_files array variable.

       $dependents_phony [0]
              If  a  list  of dependencies is output, this variable determines
              whether to include a phony target for each source file.  If  you
              use  the  dependents  list  in  a Makefile, the dummy rules work
              around errors make gives if you remove header files without  up-
              dating the Makefile to match.

       $dependents_list [0]
              Whether  to  display  a  list(s) of dependencies at the end of a
              run.

       $deps_file ["-"]
              Name of file to receive list(s) of dependencies at the end of  a
              run,  to be used if $dependesnt_list is set.  If the filename is
              "-", then the dependency list is set to stdout  (i.e.,  normally
              the screen).


       $do_cd [0]
              Whether  to  change working directory to the directory specified



                               18 November 2022                             43





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


              for the main source file before processing it.  The default  be-
              havior  is  not to do this, which is the same as the behavior of
              *latex programs.  This variable is set by the -cd and  -cd-  op-
              tions on latexmk's command line.

       $dvi_filter [empty]
              The dvi file filter to be run on the newly produced dvi file be-
              fore other processing.  Equivalent to specifying the -dF option.


       $dvilualatex ["dvilualatex %O %S"]
              Specifies the command line to invoke  the  dvilualatex  program.
              Note  that as with other programs, you can use this variable not
              just to change the name of the program used,  but  also  specify
              options to the program.  E.g.,

                                  $dvilualatex  =  "dvilualatex --src-specials
              %O %S";

              To do a coordinated setting  of  all  of  $dvilualatex,  $latex,
              $pdflatex,  $lualatex,  and  $xelatex, see the section "Advanced
              Configuration".


       $dvi_mode [See below for default]
              If one, generate a dvi version of the document by use of  latex.
              Equivalent to the -dvi option.

              If 2, generate a dvi version of the document by use of dviluala-
              tex.  Equivalent to the -dvilua option.

              The variable $dvi_mode defaults to 0, but  if  no  explicit  re-
              quests  are made for other types of file (postscript, pdf), then
              $dvi_mode will be set to 1.  In addition, if  a  request  for  a
              file  for  which  a .dvi file is a prerequisite and $dvi_mode is
              zero, then $dvi_mode is set to 1.



       $dvilualatex_silent_switch ["-interaction=batchmode"]
              Switch(es) for the dvilualatex program (specified in  the  vari-
              able $dvilualatex) when silent mode is on.

              See  details  of  the $latex_silent_switch for other information
              that equally applies to $dvilualatex_silent_switch.


       $dvi_previewer ["start xdvi %O %S" under UNIX]
              The command to invoke a dvi-previewer.   [Under  MS-Windows  the
              default  is "start"; then latexmk arranges to use the MS-Windows
              start program, which will cause to be run whatever  command  the
              system has associated with .dvi files.]

              Important  note:  Normally you will want to have a previewer run



                               18 November 2022                             44





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


              detached, so that latexmk doesn't wait for the previewer to ter-
              minate  before continuing its work.  So normally you should pre-
              fix the command by "start ", which  flags  to  latexmk  that  it
              should  do  the  detaching  of the previewer itself (by whatever
              method is appropriate to the operating system).   But  sometimes
              letting latexmk do the detaching is not appropriate (for a vari-
              ety of non-trivial reasons), so you should put the "start "  bit
              in yourself, whenever it is needed.

       $dvi_previewer_landscape ["start xdvi %O %S"]
              The command to invoke a dvi-previewer in landscape mode.  [Under
              MS-Windows the default is "start"; then latexmk arranges to  use
              the  MS-Windows  start program, which will cause to be run what-
              ever command the system has associated with .dvi files.]

       $dvipdf ["dvipdf -dALLOWPSTRANSPARENCY %O %S %D"]
              Command to convert .dvi to .pdf file.  A common  reconfiguration
              is  to  use  the dvipdfm command, which needs its arguments in a
              different order:

                   $dvipdf = "dvipdfm %O -o %D %S";

              WARNING: The default dvipdf  script  generates  pdf  files  with
              bitmapped fonts, which do not look good when viewed by acroread.
              That script should be modified to give  dvips  the  options  "-P
              pdf" to ensure that type 1 fonts are used in the pdf file.

       $dvipdf_silent_switch ["-q"]
              Switch(es) for dvipdf program when silent mode is on.

              N.B.  The  standard  dvipdf program runs silently, so adding the
              silent switch has no effect, but is actually innocuous.  But  if
              an  alternative program is used, e.g., dvipdfmx, then the silent
              switch has an  effect.   The  default  setting  is  correct  for
              dvipdfm and dvipdfmx.

       $dvips ["dvips %O -o %D %S"]
              The  program to used as a filter to convert a .dvi file to a .ps
              file.  If pdf is going to be generated from pdf, then the  value
              of  the  $dvips_pdf_switch  variable -- see below -- will be in-
              cluded in the options substituted for "%O".

       $dvips_landscape ["dvips -tlandscape %O -o %D %S"]
              The program to used as a filter to convert a .dvi file to a  .ps
              file in landscape mode.

       $dvips_pdf_switch ["-P pdf"]
              Switch(es)  for  dvips  program when pdf file is to be generated
              from .ps file.

       $dvips_silent_switch ["-q"]
              Switch(es) for dvips program when silent mode is on.





                               18 November 2022                             45





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


       $dvi_update_command [""]
              When the dvi previewer is set to be updated by  running  a  com-
              mand,  this is the command that is run.  See the information for
              the variable $dvi_update_method for further information, and see
              information  on  the  variable $pdf_update_method for an example
              for the analogous case of a pdf previewer.

       $dvi_update_method [2 under UNIX, 1 under MS-Windows]
              How the dvi viewer updates its display when  the  dvi  file  has
              changed.    The  values  here  apply  equally  to  the  $pdf_up-
              date_method and to the $ps_update_method variables.
                  0 => update is automatic,
                  1=> manual update by user, which may only mean a mouse click
              on the viewer's window or may mean a more serious action.
                  2  =>  Send  the  signal,  whose  number  is in the variable
              $dvi_update_signal.  The default value under  UNIX  is  suitable
              for xdvi.
                  3  => Viewer cannot do an update, because it locks the file.
              (As with acroread under MS-Windows.)
                  4 => run a command to do the update.  The command is  speci-
              fied by the variable $dvi_update_command.

              See  information on the variable $pdf_update_method for an exam-
              ple of updating by command.

       $dvi_update_signal [Under UNIX: SIGUSR1, which  is  a  system-dependent
       value]
              The  number of the signal that is sent to the dvi viewer when it
              is updated by sending a signal -- see  the  information  on  the
              variable  $dvi_update_method.   The default value is the one ap-
              propriate for xdvi on a UNIX system.

       $emulate_aux [0]
              Whether to emulate the use of aux_dir when $aux_dir and $out_dir
              are  different,  rather than using the -aux-directory option for
              the  *latex  programs.   (MiKTeX  supports  -aux-directory,  but
              TeXLive doesn't.)

              If  you use a version of *latex that doesn't support -aux-direc-
              tory, e.g., TeXLive, latexmk will automatically  switch  aux_dir
              emulation on after the first run of *latex, because it will find
              the .log file in the wrong place.  But it is better to set $emu-
              late_aux  to  1  in an rc file, or equivalently to use the -emu-
              late-aux-dir option. This emulation mode works equally well with
              MiKTeX.

              Aux_directory  emulation  means that when *latex is invoked, the
              output directory provided to *latex is set to  be  the  aux_dir.
              After  that,  any  files that need to be in the output directory
              will be moved there. (These are the files with extensions  .dvi,
              .ps, .pdf, .fls, .synctex, .synctex.gz.)






                               18 November 2022                             46





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


       $failure_cmd [undefined]
              See the documentation for $compiling_cmd.

       $fdb_ext ["fdb_latexmk"]
              The  extension  of the file which latexmk generates to contain a
              database of information on source files.  You will not  normally
              need to change this.

       $filetime_causality_threshold   [5];  $filetime_offset_report_threshold
       [30]. (Units of seconds.)

              These variables control how latexmk deals with the following is-
              sue,  which  can  affect  the  use of files that are on a remote
              filesystem (network share) instead of being on a file system lo-
              cal to the computer running latexmk.  Almost users will not have
              to worry about these settings, and can ignore the following  ex-
              planation.

              In  almost all situations, latexmk does not need to use the time
              stamps of the files it works with.  However, there are a  couple
              of  situations  when it needs to know whether a certain file was
              created in the current run of a program (e.g., *latex) or  is  a
              leftover file from a previous run. It does this by comparing the
              modification time of the file with the system time  just  before
              the  program  was  started.  If the modification time is earlier
              than when the program was started, the file is a leftover  file,
              which latexmk treats as if it were not created.  If the filetime
              is at least the program start time, then it can be assumed  that
              the file was created in the current run.

              Unfortunately,  this  test  can  fail if the file is on a remote
              system, since its system time is  not  necessarily  synchronized
              with  that  of  the  local  system; the timestamps on the remote
              files are set by the remote system, not the local system.   Gen-
              erally,  modern  operating  systems  regularly synchronize their
              time with a server, so the non-synchronization is  mostly  small
              (a second or so, or a few seconds).  But even a small difference
              can mess up latexmk's test.

              Latexmk measures the time difference between the time on the two
              systems  and  compensates  for  this.  But the measurement (in a
              system-independent way) is only accurate to a second or two.  So
              latexmk  allows  for  a threshold on the difference between file
              and system time before it concludes that a file  is  a  leftover
              file  from  a  previous  run.  The configuration variable $file-
              time_causality_theshhold, which in units of  seconds,  specifies
              this threshold.  Luckily high precision is not needed.  The pre-
              vious run is normally the previous run in a  human  run-edit-run
              cycle,  and  is  at  least  many seconds back.  A few seconds is
              therefore  appropriate  for  the  threshold,   $filetime_causal-
              ity_theshhold;  it  should be non-negative always, and should be
              bigger than 2 if a remote filesystem or network share is used.

              If the difference in system times on the two systems  is  large,



                               18 November 2022                             47





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


              it  normally  indicates that at least one of the systems is mis-
              configured.   The   variable   $filetime_offset_report_threshold
              specifies  the  smallest  size  of the difference (or offset) in
              seconds between the times of the local and remote system  beyond
              which  the offset is reported.  This is reported at the point in
              the latexmk's progress that it measures the offset.  The  report
              is made if silent mode is used and diagnostic mode is not on.


       $force_mode [0]
              If  nonzero, continue processing past minor latex errors includ-
              ing unrecognized cross references.  Equivalent to specifying the
              -f option.


       @generated_exts  [(  'aux',  'bcf',  'fls', 'idx', 'ind', 'lof', 'lot',
       'out', 'toc', 'blg', 'ilg', 'log', 'xdv' )]

              This contains a list of extensions for files that are  generated
              during  processing,  and  that  should  be deleted during a main
              clean up operation, as invoked by the command  line  option  -c.
              (The use of -C or -gg gives this clean up and more.)

              The  default  values are extensions for standard files generated
              by *latex, bibtex, and the like.  (Note that the clean  up  also
              deletes  the  fdb_latexmk file, but that's separately coded into
              latexmk, currently.)

              After initialization of latexmk and the processing of  its  com-
              mand  line,  the  items  in  clean_ext  are  appended to @gener-
              ated_exts.  So these two variables have the same  meaning  (con-
              trary to older versions of latexmk).

              The  items  in @generated_exts are normally extensions of files,
              whose base name is the same as the main tex  file.   But  it  is
              also  possible  to  specify patterns including that basename ---
              see the explanation of the variable $clean_ext.

              In addition to specifying files to be deleted in a clean up, la-
              texmk  uses  the same specification to assist its examination of
              changes in source files: Under some situations it needs to  find
              those  changes in files (since a previous run) that are expected
              to be due to the user editing a file.  This contrasts  with  the
              cases of files that are generated by some program run by latexmk
              and that differ from the results of the previous run.  This  use
              of  @generated_exts is normally unimportant, given the usual ac-
              curacy of latexmk's other ways of  determining  these  generated
              files.

              A  convenient way to add an extra extension to the list, without
              losing the already defined ones is to use a push command in  the
              line in an RC file.  E.g.,

                              push @generated_exts, "end";



                               18 November 2022                             48





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


              adds the extension "end" to the list of predefined generated ex-
              tensions.  (This extension is used by the  RevTeX  package,  for
              example.)


       $go_mode [0]
              If  nonzero, process files regardless of timestamps, and is then
              equivalent to the -g option.

       %hash_calc_ignore_pattern
              !!!This variable is for experts only!!!

              The general rule latexmk uses for determining when an extra  run
              of  some  program  is needed is that one of the source files has
              changed.  But consider for example a latex package  that  causes
              an  encapsulated postscript file (an "eps" file) to be made that
              is to be read in on the next run.  The file contains  a  comment
              line  giving  its  creation  date and time.  On the next run the
              time changes, latex sees that the  eps  file  has  changed,  and
              therefore  reruns  latex.  This causes an infinite loop, that is
              only terminated because latexmk has a limit  on  the  number  of
              runs to guard against pathological situations.

              But the changing line has no real effect, since it is a comment.
              You can instruct latex to ignore the offending line as follows:

                 $hash_calc_ignore_pattern{'eps'} = '^%%CreationDate: ';

              This creates a rule for files with extension .eps about lines to
              ignore.   The left-hand side is a Perl idiom for setting an item
              in a hash.  Note that the file extension is specified without  a
              period.  The value, on the right-hand side, is a string contain-
              ing a regular expression.  (See documentation on  Perl  for  how
              they  are  to be specified in general.)  This particular regular
              expression specifies that lines beginning with  "%%CreationDate:
              "  are to be ignored in deciding whether a file of the given ex-
              tension .eps has changed.

              There is only one regular expression available for  each  exten-
              sion.   If you need more one pattern to specify lines to ignore,
              then you need to combine the patterns into a single regular  ex-
              pression.   The simplest method is separate the different simple
              patterns by a vertical bar character  (indicating  "alternation"
              in the jargon of regular expressions).  For example,

                 $hash_calc_ignore_pattern{'eps'}  = '^%%CreationDate: |^%%Ti-
              tle: ';

              causes lines starting with either "^%%CreationDate: " or "^%%Ti-
              tle: " to be ignored.

              It  may happen that a pattern to be ignored is specified in, for
              example, in a system or user initialization file, and  you  wish
              to  remove  this  in a file that is read later.  To do this, you



                               18 November 2022                             49





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


              use Perl's delete function, e.g.,

                  delete $hash_calc_ignore_pattern{'eps'};


       $jobname [""]

              This specifies the jobname, i.e., the basename that is used  for
              generated  files  (.aux,  .log,  .dvi, .ps, .pdf, etc).  If this
              variable is a null string, then the basename is the basename  of
              the  main  tex file.  (At present, the string in $jobname should
              not contain spaces.)

              The placeholder '%A' is permitted. This will be  substituted  by
              the basename of the TeX file.  The primary purpose is when a va-
              riety of tex files are to be processed, and you want  to  use  a
              different  jobname  for  each but one that is distinct for each.
              Thus if you wanted to compare compilations of a set of files  on
              different operating systems, with distinct filenames for all the
              cases, you could set

                 $jobname = "%A-$^O";

              in an initialization file.  (Here $^O is a variable provided  by
              perl that contains perl's name for the operating system.)

              Suppose  you  had .tex files test1.tex and test2.tex.  Then when
              you run

                 latexmk -pdf *.tex

              both files will be compiled.  The .aux,  .log,  and  .pdf  files
              will  have  basenames  test1-MSWin32 ante test2-MSWin32 on a MS-
              Windows system, test1-darwin and test2-darwin on an OS-X system,
              and a variety of similar cases on linux systems.


       $kpsewhich ["kpsewhich %S"]
              The  program  called to locate a source file when the name alone
              is not sufficient.  Most filenames used by latexmk  have  suffi-
              cient path information to be found directly.  But sometimes, no-
              tably when a .bib or a .bst file is found from the log file of a
              bibtex  or  biber  run, only the base name of the file is known,
              but not its path. The program specified by $kpsewhich is used to
              find it.

              (For  advanced  users: Because of the different way in which la-
              texmk uses the command specified in $kpsewhich, some of the pos-
              sibilities listed in the FORMAT OF COMMAND SPECIFICATIONS do not
              apply.  The internal and start keywords  are  not  available.  A
              simple command specification with possible options and then "%S"
              is all that is guaranteed to work.  Note  that  for  other  com-
              mands, "%S" is substituted by a single source file. In contrast,
              for $kpsewhich, "%S" may be substituted by a long list of space-



                               18 November 2022                             50





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


              separated  filenames,  each  of  which is quoted.  The result on
              STDOUT of running the command is then piped to latexmk.)

              See also the @BIBINPUTS variable for another  way  that  latexmk
              also uses to try to locate files; it applies only in the case of
              .bib files.

       $kpsewhich_show [0]
              Whether to show diagnostics about invocations of kpsewhich:  the
              command  line  use to invoke it and the results.  These diagnos-
              tics are shown if $kpsewhich_show is non-zero or if  diagnostics
              mode  is on.  (But in the second case, lots of other diagnostics
              are also shown.)  Without these  diagnostics  there  is  nothing
              visible  in  latexmk's  screen output about invocations of kpse-
              which.

       $landscape_mode [0]
              If nonzero, run in landscape mode, using the landscape mode pre-
              viewers  and dvi to postscript converters.  Equivalent to the -l
              option.  Normally not needed with current previewers.

       $latex ["latex %O %S"]
              Specifies the command line for  the  LaTeX  processing  program.
              Note  that as with other programs, you can use this variable not
              just to change the name of the program used,  but  also  specify
              options to the program.  E.g.,

                                  $latex = "latex --src-specials %O %S";

              To  do  a  coordinated  setting  of all of $dvilualatex, $latex,
              $pdflatex, $lualatex, and $xelatex, see  the  section  "Advanced
              Configuration".


       %latex_input_extensions
              This  variable specifies the extensions tried by latexmk when it
              finds that a LaTeX run resulted in an error that a file has  not
              been  found,  and  the file is given without an extension.  This
              typically happens when LaTeX commands of the  form  \input{file}
              or  \includegraphics{figure}, when the relevant source file does
              not exist.

              In this situation, latexmk searches for custom  dependencies  to
              make  the  missing  file(s),  but restricts it to the extensions
              specified by the variable %latex_input_extensions.  The  default
              extensions are 'tex' and 'eps'.

              (For  Perl experts: %latex_input_extensions is a hash whose keys
              are the extensions.  The values are  irrelevant.)   Two  subrou-
              tines  are  provided for manipulating this and the related vari-
              able %pdflatex_input_extensions,  add_input_ext  and  remove_in-
              put_ext.   They are used as in the following examples are possi-
              ble lines in an initialization file:




                               18 November 2022                             51





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


                  remove_input_ext( 'latex', 'tex' );

              removes the extension 'tex' from latex_input_extensions

                  add_input_ext( 'latex', 'asdf' );

              add the extension 'asdf to  latex_input_extensions.   (Naturally
              with such an extension, you should have made an appropriate cus-
              tom dependency for latexmk, and should also have done the appro-
              priate  programming  in the LaTeX source file to enable the file
              to be read.  The standard extensions are handled  by  LaTeX  and
              its graphics/graphicx packages.)

       $latex_silent_switch ["-interaction=batchmode"]
              Switch(es)  for the LaTeX processing program when silent mode is
              on.

              If you use MikTeX, you may prefer the results if  you  configure
              the  options  to include -c-style-errors, e.g., by the following
              line in an initialization file

                $latex_silent_switch  =  "-interaction=batchmode  -c-style-er-
              rors";


       $lpr ["lpr %O %S" under UNIX/Linux, "NONE lpr" under MS-Windows]
              The command to print postscript files.

              Under  MS-Windows (unlike UNIX/Linux), there is no standard pro-
              gram for printing files.  But there are ways you can do it.  For
              example, if you have gsview installed, you could use it with the
              option "/p":

                  $lpr = '"c:/Program Files/Ghostgum/gsview/gsview32.exe" /p';

              If gsview is installed in a different directory, you  will  need
              to  make the appropriate change.  Note the combination of single
              and double quotes around the name.  The  single  quotes  specify
              that  this is a string to be assigned to the configuration vari-
              able $lpr.  The double quotes are part of the string  passed  to
              the  operating  system to get the command obeyed; this is neces-
              sary because one part of the command name ("Program Files") con-
              tains a space which would otherwise be misinterpreted.

       $lpr_dvi ["NONE lpr_dvi"]
              The printing program to print dvi files.

       $lpr_pdf ["NONE lpr_pdf"]
              The printing program to print pdf files.

              Under  MS-Windows you could set this to use gsview, if it is in-
              stalled, e.g.,

                  $lpr = '"c:/Program Files/Ghostgum/gsview/gsview32.exe" /p';



                               18 November 2022                             52





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


              If gsview is installed in a different directory, you  will  need
              to  make  the appropriate change.  Note the double quotes around
              the name: this is necessary because one part of the command name
              ("Program Files") contains a space which would otherwise be mis-
              interpreted.

       $lualatex ["lualatex %O %S"]
              Specifies the command line for the LaTeX processing program that
              is  to be used when the lualatex program is called for (e.g., by
              the option -lualatex.

              To do a coordinated setting  of  all  of  $dvilualatex,  $latex,
              $pdflatex,  $lualatex,  and  $xelatex, see the section "Advanced
              Configuration".


       %lualatex_input_extensions
              This variable specifies the extensions tried by latexmk when  it
              finds  that  a lualatex run resulted in an error that a file has
              not been found, and the file  is  given  without  an  extension.
              This  typically  happens  when  LaTeX  commands of the form \in-
              put{file} or \includegraphics{figure}, when the relevant  source
              file does not exist.

              In  this  situation, latexmk searches for custom dependencies to
              make the missing file(s), but restricts  it  to  the  extensions
              specified  by  the variable %pdflatex_input_extensions.  The de-
              fault extensions are 'tex', 'pdf', 'jpg, and 'png'.

              See details of the %latex_input_extensions for other information
              that equally applies to %lualatex_input_extensions.

       $lualatex_silent_switch ["-interaction=batchmode"]
              Switch(es)  for  the lualatex program (specified in the variable
              $lualatex) when silent mode is on.

              See details of the $latex_silent_switch  for  other  information
              that equally applies to $lualatex_silent_switch.

       $make ["make"]
              The make processing program.

       $makeindex ["makeindex %O -o %D %S"]
              The index processing program.

       $makeindex_fudge [0]
              When  using  makeindex,  whether to change directory to $aux_dir
              before running makeindex.  Set to 1 if $aux_dir is  not  an  ex-
              plicit  subdirectory  of  current directory, otherwise makeindex
              will refuse to write its output and log files, for security rea-
              sons.

       $makeindex_silent_switch ["-q"]
              Switch(es)  for the index processing program when silent mode is



                               18 November 2022                             53





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


              on.

       $max_repeat [5]
              The maximum number of times latexmk will run *latex  before  de-
              ciding  that  there may be an infinite loop and that it needs to
              bail out, rather than rerunning *latex again to  resolve  cross-
              references, etc.  The default value covers all normal cases.

              (Note that the "etc" covers a lot of cases where one run of *la-
              tex generates files to be read in on a later run.)

       $MSWin_back_slash [1]
              This configuration variable only has an effect when  latexmk  is
              running  under MS-Windows.  With the default value of 1 for this
              variable, when a command is executed under  MS-Windows,  latexmk
              substitutes  "\"  for the separator character between components
              of a directory name.  Internally, latexmk uses "/" for  the  di-
              rectory  separator  character,  which  is  the character used by
              Unix-like systems.

              For almost all programs and for almost all filenames  under  MS-
              Windows,  both "\" and "/" are acceptable as the directory sepa-
              rator character, provided at least that filenames  are  properly
              quoted.  But it is possible that programs exist that only accept
              "\" on the command line, since that is  the  standard  directory
              separator  for MS-Windows.  So for safety latexmk makes the sub-
              stitution from "/" to "\", by default.

              However there are also programs on MS-Windows for which  a  back
              slash "\" is interpreted differently than as a directory separa-
              tor; for these the directory separator should be "/".   Programs
              with  this  behavior  include  all  the  *latex  programs in the
              TeXLive implementation  (but  not  the  MiKTeX  implementation).
              Hence  if  you use TeXLive on MS-Windows, then $MSWin_back_slash
              should be set to zero.


       $new_viewer_always [0]
              This variable applies  to  latexmk  only  in  continuous-preview
              mode.  If $new_viewer_always is 0, latexmk will check for a pre-
              viously running previewer on the same file, and if one  is  run-
              ning  will  not  start a new one.  If $new_viewer_always is non-
              zero, this check will be skipped, and latexmk will behave as  if
              no viewer is running.

       $out_dir [""]
              If  non-blank,  this  variable  specifies the directory in which
              output files are to be written by a run of *latex.  See also the
              variable $aux_dir.

              The  effect of this variable (when non-blank) is achieved by us-
              ing the -output-directory option of *latex.  This exists in  the
              usual  current  (Dec.  2011  and  later) implementations of TeX,
              i.e., MiKTeX and TeXLive. But it may not  be  present  in  other



                               18 November 2022                             54





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


              versions.

              If  you also use the -cd option, and $out_dir (or $aux_dir) con-
              tains a relative path, then the path is interpreted relative  to
              the document directory.

              Commonly,  the  directory specified for output files is a subdi-
              rectory of the current working directory.  However, if you spec-
              ify  some  other  directory, e.g., "/tmp/foo" or "../output", be
              aware that this could cause problems, e.g.,  with  makeindex  or
              bibtex.   This  is because modern versions of these programs, by
              default, will refuse to work when they find that they are  asked
              to  write  to  a  file in a directory that appears not to be the
              current working directory or one of its subdirectories.  This is
              part  of  security  measures by the whole TeX system that try to
              prevent malicious or errant TeX documents from incorrectly mess-
              ing with a user's files.  If for $out_dir or $aux_dir you really
              do need to specify an absolute pathname (e.g., "/tmp/foo") or  a
              path (e.g., "../output") that includes a higher-level directory,
              and you need to use makeindex or bibtex, then you need  to  dis-
              able  the  security measures (and assume any risks).  One way of
              doing this is to temporarily set an operating system environment
              variable  openout_any  to "a" (as in "all"), to override the de-
              fault "paranoid" setting.

       $pdf_mode [0]
              If zero, do NOT generate a pdf  version  of  the  document.   If
              equal  to 1, generate a pdf version of the document using pdfla-
              tex, using the command specified by the $pdflatex variable.   If
              equal  to  2, generate a pdf version of the document from the ps
              file, by using the command specified by  the  $ps2pdf  variable.
              If  equal  to 3, generate a pdf version of the document from the
              dvi file, by using the command specified by  the  $dvipdf  vari-
              able.  If equal to 4, generate a pdf version of the document us-
              ing lualatex, using the command specified by the $lualatex vari-
              able.   If  equal  to 5, generate a pdf version (and an xdv ver-
              sion) of the document using xelatex, using the  commands  speci-
              fied by the $xelatex and xdvipdfmx variables.

              In  $pdf_mode=2,  it is ensured that .dvi and .ps files are also
              made.  In $pdf_mode=3, it is ensured that a .dvi  file  is  also
              made.  But this may be overridden by the document.

       $pdflatex ["pdflatex %O %S"]
              Specifies the command line for the LaTeX processing program in a
              version that makes a pdf file instead of a dvi file.

              An example use of this variable is to add certain options to the
              command line for the program, e.g.,

                   $pdflatex = "pdflatex --shell-escape %O %S";

              (In  some  earlier versions of latexmk, you needed to use an as-
              signment to $pdflatex to allow the use of  lualatex  or  xelatex



                               18 November 2022                             55





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


              instead of pdflatex.  There are now separate configuration vari-
              ables for the use of lualatex or  xelatex.   See  $lualatex  and
              $xelatex.)

              To  do  a  coordinated  setting  of all of $dvilualatex, $latex,
              $pdflatex, $lualatex, and $xelatex, see  the  section  "Advanced
              Configuration".


       %pdflatex_input_extensions
              This  variable specifies the extensions tried by latexmk when it
              finds that a pdflatex run resulted in an error that a  file  has
              not  been  found,  and  the  file is given without an extension.
              This typically happens when LaTeX  commands  of  the  form  \in-
              put{file}  or \includegraphics{figure}, when the relevant source
              file does not exist.

              In this situation, latexmk searches for custom  dependencies  to
              make  the  missing  file(s),  but restricts it to the extensions
              specified by the variable %pdflatex_input_extensions.   The  de-
              fault extensions are 'tex', 'pdf', 'jpg, and 'png'.

              See details of the %latex_input_extensions for other information
              that equally applies to %pdflatex_input_extensions.

       $pdflatex_silent_switch ["-interaction=batchmode"]
              Switch(es) for the pdflatex program (specified in  the  variable
              $pdflatex) when silent mode is on.

              See  details  of  the $latex_silent_switch for other information
              that equally applies to $pdflatex_silent_switch.

       $pdf_previewer ["start acroread %O %S"]
              The command to invoke a pdf-previewer.

              On MS-Windows, the default is changed to "cmd /c start """;  un-
              der  more  recent versions of Windows, this will cause to be run
              whatever command the system has associated with .pdf files.  But
              this  may  be  undesirable if this association is to acroread --
              see the notes in the explanation of the -pvc option.]

              On OS-X the default is changed to "open %S",  which  results  in
              OS-X  starting up (and detaching) the viewer associated with the
              file.  By default, for pdf files this association is  to  OS-X's
              preview, which is quite satisfactory.

              WARNING:   Problem  under MS-Windows: if acroread is used as the
              pdf previewer, and it is actually viewing a pdf  file,  the  pdf
              file  cannot  be  updated.   Thus makes acroread a bad choice of
              previewer if you use latexmk's previous-continuous mode  (option
              -pvc) under MS-windows.  This problem does not occur if, for ex-
              ample, SumatraPDF or gsview is used to view pdf files.

              Important note: Normally you will want to have a  previewer  run



                               18 November 2022                             56





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


              detached, so that latexmk doesn't wait for the previewer to ter-
              minate before continuing its work.  So normally you should  pre-
              fix  the  command  by  "start  ", which flags to latexmk that it
              should do the detaching of the  previewer  itself  (by  whatever
              method  is  appropriate to the operating system).  But sometimes
              letting latexmk do the detaching is not appropriate (for a vari-
              ety  of non-trivial reasons), so you should put the "start " bit
              in yourself, whenever it is needed.

       $pdf_update_command [""]
              When the pdf previewer is set to be updated by  running  a  com-
              mand,  this is the command that is run.  See the information for
              the variable $pdf_update_method.

       $pdf_update_method [1 under UNIX, 3 under MS-Windows]
              How the pdf viewer updates its display when  the  pdf  file  has
              changed.  See the information on the variable $dvi_update_method
              for the codes.  (Note that information needs be changed slightly
              so  that for the value 4, to run a command to do the update, the
              command is specified by the  variable  $pdf_update_command,  and
              for  the  value  2,  to  specify update by signal, the signal is
              specified by $pdf_update_signal.)

              Note that acroread under MS-Windows (but not UNIX) locks the pdf
              file, so the default value is then 3.

              Arranging to use a command to get a previewer explicitly updated
              requires three variables to be set.  For example:

                  $pdf_previewer = "start xpdf -remote %R %O %S";
                  $pdf_update_method = 4;
                  $pdf_update_command = "xpdf -remote %R -reload";

              The first setting arranges for the xpdf program to  be  used  in
              its  "remote server mode", with the server name specified as the
              rootname of the TeX file.  The second setting arranges  for  up-
              dating  to  be done in response to a command, and the third set-
              ting sets the update command.

       $pdf_update_signal [Under UNIX: SIGHUP,  which  is  a  system-dependent
       value]
              The  number of the signal that is sent to the pdf viewer when it
              is updated by sending a signal -- see  the  information  on  the
              variable  $pdf_update_method.   The default value is the one ap-
              propriate for gv on a UNIX system.

       $pid_position[1 under UNIX, -1 under MS-Windows]
              The variable $pid_position is used  to  specify  which  word  in
              lines  of  the output from $pscmd corresponds to the process ID.
              The first word in the line is numbered 0.  The default value  of
              1 (2nd word in line) is correct for Solaris 2.6, Linux, and OS-X
              with their default settings of $pscmd.

              Setting the variable to -1 is used to indicate  that  $pscmd  is



                               18 November 2022                             57





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


              not to be used.

       $postscript_mode [0]
              If  nonzero,  generate  a  postscript  version  of the document.
              Equivalent to the -ps option.

              If some other request is made for which  a  postscript  file  is
              needed, then $postscript_mode will be set to 1.

       $pre_tex_code ['']

              Sets  TeX  code to be executed before inputting the source file.
              This works if the relevant one of $latex, etc contains  a  suit-
              able command line with a %P or %U substitution.  For example you
              could do

                   $latex = 'latex %O %P';
                   $pre_tex_code = '\AtBeginDocument{An initial message\par}';

              To set all of $latex, $pdflatex,  $lualatex,  and  $xelatex  you
              could use the subroutine alt_tex_cmds:

                   &alt_tex_cmds;
                   $pre_tex_code = '\AtBeginDocument{An initial message\par}';



       $preview_continuous_mode [0]
              If  nonzero,  run a previewer to view the document, and continue
              running latexmk to keep .dvi up-to-date.  Equivalent to the -pvc
              option.   Which  previewer is run depends on the other settings,
              see the command line options -view=, and the variable $view.

       $preview_mode [0]
              If nonzero, run a previewer to preview the document.  Equivalent
              to  the -pv option.  Which previewer is run depends on the other
              settings, see the command line options -view=, and the  variable
              $view.

       $printout_mode [0]
              If  nonzero,  print  the document using the command specified in
              the $lpr variable.  Equivalent to the -p option.  This is recom-
              mended  not to be set from an RC file, otherwise you could waste
              lots of paper.

       $print_type = ["auto"]
              Type of file  to  printout:  possibilities  are  "auto",  "dvi",
              "none", "pdf", or "ps".   See the option -print= for the meaning
              of the "auto" value.

       $pscmd Command used to get all the processes currently run by the user.
              The  -pvc  option  uses  the  command  specified by the variable
              $pscmd to determine if there is an  already  running  previewer,
              and  to  find  the process ID (needed if latexmk needs to signal



                               18 November 2022                             58





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


              the previewer about file changes).

              Each line of the output of this command is assumed to correspond
              to  one  process.   See  the  $pid_position variable for how the
              process number is determined.

              The default for pscmd is  "NONE"  under  MS-Windows  and  cygwin
              (i.e.,  the  command  is not used), "ps -ww -u $ENV{USER}" under
              OS-X, and "ps -f -u $ENV{USER}" under  other  operating  systems
              (including Linux).  In these specifications "$ENV{USER}" is sub-
              stituted by the username.

       $ps2pdf ["ps2pdf -dALLOWPSTRANSPARENCY %O %S %D"]
              Command to convert .ps to .pdf file.

       $ps_filter [empty]
              The postscript file filter to be run on the newly produced post-
              script  file  before other processing.  Equivalent to specifying
              the -pF option.

       $ps_previewer ["start gv %O %S", but start %O %S under MS-Windows]
              The command to invoke a ps-previewer.  (The  default  under  MS-
              Windows will cause to be run whatever command the system has as-
              sociated with .ps files.)

              Note that gv could be used with the -watch  option  updates  its
              display  whenever the postscript file changes, whereas ghostview
              does not.  However, different versions of gv have slightly  dif-
              ferent  ways  of  writing  this  option.  You can configure this
              variable appropriately.

              WARNING: Linux systems may have installed one (or more) versions
              of  gv  under  different  names, e.g., ggv, kghostview, etc, but
              perhaps not one actually called gv.

              Important note: Normally you will want to have a  previewer  run
              detached, so that latexmk doesn't wait for the previewer to ter-
              minate before continuing its work.  So normally you should  pre-
              fix  the  command  by  "start  ", which flags to latexmk that it
              should do the detaching of the  previewer  itself  (by  whatever
              method  is  appropriate to the operating system).  But sometimes
              letting latexmk do the detaching is not appropriate (for a vari-
              ety  of non-trivial reasons), so you should put the "start " bit
              in yourself, whenever it is needed.


       $ps_previewer_landscape ["start gv -swap %O %S", but start %O %S  under
       MS-Windows]
              The command to invoke a ps-previewer in landscape mode.

       $ps_update_command [""]
              When  the postscript previewer is set to be updated by running a
              command, this is the command that is run.  See  the  information
              for the variable $ps_update_method.



                               18 November 2022                             59





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


       $ps_update_method [0 under UNIX, 1 under MS-Windows]
              How  the postscript viewer updates its display when the .ps file
              has changed.  See  the  information  on  the  variable  $dvi_up-
              date_method  for  the  codes.   (Note  that information needs be
              changed slightly so that for the value 4, to run a command to do
              the  update,  the  command  is specified by the variable $ps_up-
              date_command, and for the value 2, to specify update by  signal,
              the signal is specified by $ps_update_signal.)

       $ps_update_signal  [Under  UNIX:  SIGHUP,  which  is a system-dependent
       value]
              The number of the signal that is sent to the pdf viewer when  it
              is  updated  by  sending a signal -- see $ps_update_method.  The
              default value is the one appropriate for gv on a UNIX system.

       $pvc_timeout [0]
              If this variable is nonzero, there will be  a   timeout  in  pvc
              mode  after  a  period of inactivity.  Inactivity means a period
              when latexmk has detected no file  changes  and  hence  has  not
              taken any actions like compiling the document. The period of in-
              activity is in the variable $pvc_timeout_mins.


       $pvc_timeout_mins [30]
              The period of inactivity, in minutes, after which pvc mode times
              out.  This is used if $pvc_timeout is nonzero.

       $pvc_view_file_via_temporary [1]
              The same as $always_view_file_via_temporary, except that it only
              applies in preview-continuous mode (-pvc option).

       $quote_filenames [1]
              This specifies whether substitutions for placeholders in command
              specifications  (as  in  $pdflatex)  are  surrounded  by  double
              quotes.  If this variable is 1 (or any other value Perl  regards
              as true), then quoting is done.  Otherwise quoting is omitted.

              The  quoting  method used by latexmk is tested to work correctly
              under UNIX systems (including Linux and Mac OS-X) and under  MS-
              Windows.   It  allows  the  use  of filenames containing special
              characters, notably spaces.  (But note  that  many  versions  of
              *latex  cannot correctly deal with TeX files whose names contain
              spaces.  Latexmk's quoting only ensures that such filenames  are
              correctly  treated  by the operating system in passing arguments
              to programs.)

       $rc_report [1]
              After initialization, whether to give a list  of  the  RC  files
              read.

       $recorder [1]
              Whether  to use the -recorder option to *latex.  Use of this op-
              tion results in a file of extension .fls containing  a  list  of
              the  files  that  these programs have read and written.  Latexmk



                               18 November 2022                             60





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


              will then use this file to improve its detection of source files
              and generated files after a run of *latex.

              It  is generally recommended to use this option (or to configure
              the $recorder variable to be on.)  But it only works  if  *latex
              supports  the  -recorder  option, which is true for most current
              implementations

              Note about the name of the .fls file:  Most  implementations  of
              *latex  produce  an .fls file with the same basename as the main
              document's LaTeX, e.g., for Document.tex, the .fls file is Docu-
              ment.fls.   However,  some implementations instead produce files
              named for the program, i.e., latex.fls or pdflatex.fls.  In this
              second  case,  latexmk copies the latex.fls or pdflatex.fls to a
              file with the basename of the main LaTeX document,  e.g.,  Docu-
              ment.fls.

       $search_path_separator [See below for default]
              The character separating paths in the environment variables TEX-
              INPUTS, BIBINPUTS, and BSTINPUTS.  This variable is mainly  used
              by  latexmk when the -outdir, -output-directory, -auxdir, and/or
              -aux-directory options are used.  In that case latexmk needs  to
              communicate  appropriately  modified  search  paths  to  bibtex,
              dvipdf, dvips, and *latex.

              [Comment to technically savvy readers: *latex  doesn't  actually
              need  the  modified  search path.  But, surprisingly, dvipdf and
              dvips do, because sometimes graphics files get generated in  the
              output or aux directories.]

              The  default  under  MSWin and Cygwin is ';' and under UNIX-like
              operating systems (including Linux and OS-X) is  ':'.   Normally
              the  defaults give correct behavior.  But there can be difficul-
              ties if your operating system is of one kind, but some  of  your
              software  is running under an emulator for the other kind of op-
              erating system; in that case you'll need to  find  out  what  is
              needed,  and  set  $search_path_separator explicitly.  (The same
              goes, of course, for unusual operating systems that are  not  in
              the MSWin, Linux, OS-X, Unix collection.)

       $show_time [0]
              Whether to show CPU time used.

       $silence_logfile_warnings [0]
              Whether  after  a run of *latex to summarize warnings in the log
              file about undefined citations  and  references.   Setting  $si-
              lence_logfile_warnings=0 gives the summary of warnings (provided
              silent mode isn't also set), and this is useful to locate  unde-
              fined  citations  and  references  without searching through the
              much more verbose log file or the screen output of *latex.   But
              the  summary  can  also be excessively annoying.  The default is
              not to give these  warnings.   The  command  line  options  -si-
              lence_logfile_warning_list   and  -silence_logfile_warning_list-
              also set this variable.



                               18 November 2022                             61





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


              Note that multiple occurrences for the same undefined object  on
              the same page and same line will be compressed to a single warn-
              ing.

       $silent [0]
              Whether to run silently.  Setting $silent to 1 has the same  ef-
              fect as the -quiet of -silent options on the command line.

       $sleep_time [2]
              The  time to sleep (in seconds) between checking for source file
              changes when running with the -pvc option.  This is subject to a
              minimum  of one second delay, except that zero delay is also al-
              lowed.

              A value of exactly 0 gives no delay, and  typically  results  in
              100% CPU usage, which may not be desirable.

       $texfile_search [""]
              This  is  an  obsolete  variable, replaced by the @default_files
              variable.

              For  backward  compatibility,  if  you  choose  to   set   $tex-
              file_search,  it  is  a string of space-separated filenames, and
              then latexmk replaces @default_files with the filenames in $tex-
              file_search to which is added "*.tex".

       $success_cmd [undefined]
              See the documentation for $compiling_cmd.

       $tmpdir [See below for default]
              Directory  to  store  temporary  files that latexmk may generate
              while running.

              The default under MSWindows (including cygwin), is to  set  $tm-
              pdir  to the value of the first of whichever of the system envi-
              ronment variables TMPDIR or TEMP exists, otherwise to  the  cur-
              rent  directory.   Under other operating systems (expected to be
              UNIX/Linux, including OS-X), the default is  the  value  of  the
              system  environment  variable  TMPDIR  if  it  exists, otherwise
              "/tmp".

       $use_make_for_missing_files [0]
              Whether to use make to try and make files that are missing after
              a  run of *latex, and for which a custom dependency has not been
              found.  This is generally useful only when latexmk  is  used  as
              part  of  a bigger project which is built by using the make pro-
              gram.

              Note that once a missing file has been made, no further calls to
              make  will  be made on a subsequent run of latexmk to update the
              file.  Handling this problem is the job of  a  suitably  defined
              Makefile.   See the section "USING latexmk WITH make" for how to
              do this.  The intent of calling make from latexmk is  merely  to
              detect dependencies.



                               18 November 2022                             62





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


       $view ["default"]
              Which  kind  of  file is to be previewed if a previewer is used.
              The possible values are  "default",  "dvi",  "ps",  "pdf".   The
              value of "default" means that the "highest" of the kinds of file
              generated is to be used (among .dvi, .ps and .pdf).


       $warnings_as_errors [0]
              Normally latexmk copies the behavior of latex in treating  unde-
              fined  references  and citations and multiply defined references
              as conditions that give a warning but not an error.   The  vari-
              able $warnings_as_errors controls whether this behavior is modi-
              fied.

              When the variable is non-zero, latexmk at the  end  of  its  run
              will  return  a  non-zero status code to the operating system if
              any of the files processed gives a warning about  problems  with
              citations or references (i.e., undefined citations or references
              or multiply defined references).  This is after latexmk has com-
              pleted  all  the runs it needs to try and resolve references and
              citations.  Thus $warnings_as_errors being  nonzero  causes  la-
              texmk to treat such warnings as errors, but only when they occur
              on the last run of *latex and only after processing is complete.
              A  non-zero value $warnings_as_errors can be set by the command-
              line option -Werror.

              The default behavior is normally satisfactory in the usual edit-
              compile-edit  cycle.  But, for example, latexmk can also be used
              as part of a build process for some bigger  project,  e.g.,  for
              creating  documentation  in the build of a software application.
              Then it is often sensible to treat citation and reference  warn-
              ings  as  errors  that  require  the overall build process to be
              aborted.  Of course, since multiple runs of *latex are generally
              needed  to resolve references and citations, what matters is not
              the warnings on the first run, but the warnings on the last run;
              latexmk takes this into account appropriately.

              In  addition,  when  preview-continuous mode is used, a non-zero
              value for $warnings_as_errors changes the use  of  the  commands
              $failure_cmd,  $warning_cmd,  and  $success_cmd after a complia-
              tion.  If there are citation or reference warnings, but no other
              errors,  the  behavior is as follows. If $warning_cmd is set, it
              is used.  If it is not set, then then if $warnings_as_errors  is
              non-zero  and $failure_cmd is set, then $failure_cmd.  Otherwise
              $success_cmd is used, if it is set.  (The foregoing  explanation
              is rather complicated, because latexmk has to deal with the case
              that one or more of the commands isn't set.)


       $xdv_mode [0]
              If one, generate an xdv version of the document by use of  xela-
              tex.





                               18 November 2022                             63





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


       $xdvipdfmx ["xdvipdfmx -E -o %D %O %S"]

              The  program  to  make a pdf file from an xdv file (used in con-
              junction with xelatex when $pdf_mode=5).

       $xdvipdfmx_silent_switch ["-q"]
              Switch(es) for the xdvipdfmx program when silent mode is on.

       $xelatex ["xelatex %O %S"]
              Specifies the command line for the LaTeX processing  program  of
              when  the  xelatex program is called for.  See the documentation
              of the -xelatex option for some special properties of  latexmk's
              use of xelatex.

              Note  about xelatex: latexmk uses xelatex to make an .xdv rather
              than .pdf file, with the .pdf file being created in  a  separate
              step.  This is enforced by the use of the -no-pdf option.  If %O
              is part of the command for invoking xelatex, then  latexmk  will
              insert the -no-pdf option automatically, otherwise you must pro-
              vide the option yourself.  See the documentation for the  -pdfxe
              option for why latexmk makes a .xdv file rather than a .pdf file
              when xelatex is used.

              To do a coordinated setting  of  all  of  $dvilualatex,  $latex,
              $pdflatex,  $lualatex,  and  $xelatex, see the section "Advanced
              Configuration".


       %xelatex_input_extensions
              This variable specifies the extensions tried by latexmk when  it
              finds  that  an xelatex run resulted in an error that a file has
              not been found, and the file  is  given  without  an  extension.
              This  typically  happens  when  LaTeX  commands of the form \in-
              put{file} or \includegraphics{figure}, when the relevant  source
              file does not exist.

              In  this  situation, latexmk searches for custom dependencies to
              make the missing file(s), but restricts  it  to  the  extensions
              specified  by  the  variable %xelatex_input_extensions.  The de-
              fault extensions are 'tex', 'pdf', 'jpg, and 'png'.

              See details of the %latex_input_extensions for other information
              that equally applies to %xelatex_input_extensions.

       $xelatex_silent_switch ["-interaction=batchmode"]
              Switch(es)  for  the  xelatex program (specified in the variable
              $xelatex) when silent mode is on.

              See details of the $latex_silent_switch  for  other  information
              that equally applies to $xelatex_silent_switch.







                               18 November 2022                             64





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


CUSTOM DEPENDENCIES
       In  any RC file a set of custom dependencies can be set up to convert a
       file with one extension to a file with another.  An example use of this
       would be to allow latexmk to convert a .fig file to .eps to be included
       in the .tex file.


   Defining a custom dependency:
       The old method of configuring latexmk to use a custom dependency was to
       directly  manipulate  the @cus_dep_list array that contains information
       defining the custom dependencies.  (See  the  section  "Old  Method  of
       Defining  Custom  Dependencies"  for details.) This method still works,
       but is no longer preferred.

       A better method is to use the subroutines that allow convenient manipu-
       lations of the custom dependency list.  These are

           add_cus_dep( fromextension, toextension, must, subroutine )
           remove_cus_dep( fromextension, toextension )
           show_cus_dep()

       The arguments are as follows:

       from extension:
              The  extension  of the file we are converting from (e.g. "fig").
              It is specified without a period.

       to extension:
              The extension of the file we are converting to (e.g. "eps").  It
              is specified without a period.

       must:  If  non-zero,  the file from which we are converting must exist,
              if it doesn't exist latexmk will give an error message and  exit
              unless the -f option is specified.  If must is zero and the file
              we are converting from doesn't exist, then no action  is  taken.
              Generally, the appropriate value of must is zero.

       function:
              The  name  of the subroutine that latexmk should call to perform
              the file conversion.  The first argument to  the  subroutine  is
              the base name of the file to be converted without any extension.
              The subroutines are declared in the syntax of Perl.   The  func-
              tion  should  return 0 if it was successful and a nonzero number
              if it failed.


       Naturally add_cus_dep adds a custom dependency with the specified  from
       and  to extensions.  If a custom dependency has been previously defined
       (e.g., in an rcfile that was read earlier), then it is replaced by  the
       new one.

       The  subroutine remove_cus_dep removes the specified custom dependency.
       The subroutine show_cus_dep causes a list of the currently defined cus-
       tom dependencies to be sent to the screen output.



                               18 November 2022                             65





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


   How custom dependencies are used:
       An instance of a custom dependency rule is created whenever latexmk de-
       tects that a run of *latex needs to read a file, like a graphics  file,
       whose  extension  is the to-extension of a custom dependency.  Then la-
       texmk examines whether a file exists with the same name, but  with  the
       corresponding  from-extension,  as  specified in the custom-dependency.
       If it does, then a corresponding instance of the custom  dependency  is
       created,  after which the rule is invoked whenever the destination file
       (the one with the to-extension) is out-of-date with respect to the cor-
       responding source file.

       To  make the new destination file, the Perl subroutine specified in the
       rule is invoked, with an argument that is the base name of the files in
       question.   Simple cases just involve a subroutine invoking an external
       program; this can be done by following the  templates  below,  even  by
       those  without  knowledge of the Perl programming language.  Of course,
       experts could do something much more elaborate.

       One item in the specification of each custom-dependency  rule,  labeled
       "must"  above, specifies how the rule should be applied when the source
       file fails to exist.

       When latex reports that an input file (e.g., a graphics file) does  not
       exist, latexmk tries to find a source file and a custom dependency that
       can be used to make it.  If it succeeds, then it creates an instance of
       the  custom  dependency  and invokes it to make the missing file, after
       which the next pass of latex etc will be able to read the newly created
       file.

       Note  for  advanced  usage: The operating system's environment variable
       TEXINPUTS can be used to specify a search path for finding files by la-
       tex  etc.   Correspondingly,  when  a missing file is reported, latexmk
       looks in the directories specified in TEXINPUTS as well as in the  cur-
       rent  directory, to find a source file from which an instance of a cus-
       tom dependency can be used to make the missing file.


   Function to implement custom dependency, traditional method:
       The function that implements a custom dependency gets  the  information
       on the files to be processed in two ways.  The first is through its one
       argument; the argument contains the base name of the source and  desti-
       nation files.  The second way is described later.

       A  simple and typical example of code in an initialization rcfile using
       the first method is:

           add_cus_dep( 'fig', 'eps', 0, 'fig2eps' );
           sub fig2eps {
               system( "fig2dev -Leps \"$_[0].fig\" \"$_[0].eps\"" );
           }

       The first line adds a custom dependency that converts a file  with  ex-
       tension "fig", as created by the xfig program, to an encapsulated post-
       script file, with  extension  "eps".   The  remaining  lines  define  a



                               18 November 2022                             66





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


       subroutine  that  carries out the conversion.  If a rule for converting
       "fig" to "eps" files already exists (e.g., from  a  previously  read-in
       initialization  file),  the latexmk will delete this rule before making
       the new one.

       Suppose latexmk is using this rule to convert a  file  "figure.fig"  to
       "figure.eps".   Then  it  will invoke the fig2eps subroutine defined in
       the above code with a single argument "figure", which is  the  basename
       of  each  of the files (possibly with a path component).  This argument
       is referred to by Perl as $_[0].  In the example above, the  subroutine
       uses the Perl command system to invoke the program fig2dev.  The double
       quotes around the string are a Perl idiom that signify that each string
       of  the  form  of a variable name, $_[0] in this case, is to be substi-
       tuted by its value.

       If the return value of the subroutine is non-zero,  then  latexmk  will
       assume  an  error  occurred during the execution of the subroutine.  In
       the above example, no explicit return value is given, and  instead  the
       return  value  is  the value returned by the last (and only) statement,
       i.e., the invocation of system, which returns the value 0 on success.

       If you use pdflatex, lualatex or xelatex instead  of  latex,  then  you
       will  probably  prefer to convert your graphics files to pdf format, in
       which case you would replace the above code in an  initialization  file
       by

           add_cus_dep( 'fig', 'pdf, 0, 'fig2pdf' );
           sub fig2pdf {
               system( "fig2dev -Lpdf \"$_[0].fig\" \"$_[0].pdf\"" );
           }

       Note  1: In the command lines given in the system commands in the above
       examples, double quotes have been inserted around the file  names  (im-
       plemented  by '\"' in the Perl language).  They immunize the running of
       the program against special characters in filenames.  Very often  these
       quotes  are  not  necessary, i.e., they can be omitted.  But it is nor-
       mally safer to keep them in.  Even though the rules  for  quoting  vary
       between  operating  systems,  command  shells  and individual pieces of
       software, the quotes in the above examples do not cause problems in the
       cases I have tested.

       Note  2:  One  case in which the quotes are important is when the files
       are in a subdirectory and your operating system is  Microsoft  Windows.
       Then  the  separator character for directory components can be either a
       forward slash '/' or Microsoft's more usual backward slash  '\'.   For-
       ward  slashes  are  generated  by  latexmk, to maintain its sanity from
       software like MiKTeX that mixes both directory  separators;  but  their
       correct use normally requires quoted filenames.  (See a log file from a
       run of MiKTeX (at least in v. 2.9) for an example of the  use  of  both
       directory separators.)

       Note  3:  The subroutines implementing custom dependencies in the exam-
       ples given just have  a  single  line  invoking  an  external  program.
       That's  the usual situation.  But since the subroutines are in the Perl



                               18 November 2022                             67





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


       language, you can implement much more  complicated  processing  if  you
       need it.


   Removing custom dependencies, and when you might need to do this:
       If  you  have some general custom dependencies defined in the system or
       user initialization file, you may find that for  a  particular  project
       they  are  undesirable.  So you might want to delete the unneeded ones.
       A situation where this would be desirable is where there  are  multiple
       custom  dependencies with the same from-extension or the same to-exten-
       sion. In that case, latexmk might choose a different one from  the  one
       you want for a specific project.  As an example, to remove any "fig" to
       "eps" rule you would use:

           remove_cus_dep( 'fig', 'eps' );

       If you have complicated sets of custom dependencies, you  may  want  to
       get  a  listing  of the custom dependencies.  This is done by using the
       line

           show_cus_dep();

       in an initialization file.


   Function implementing custom dependency, alternative methods:
       So far the examples for functions to implement custom dependencies have
       used the argument of the function to specify the base name of converted
       file.  This method has been available since very old  versions  of  la-
       texmk, and many examples can be found, e.g., on the web.

       However  in later versions of latexmk the internal structure of the im-
       plementation of its "rules" for the steps of processing, including cus-
       tom dependencies, became much more powerful.  The function implementing
       a custom dependency is executed within a special context where a number
       of  extra  variables  and subroutines are defined.  Publicly documented
       ones, intended to be long-term stable,  are  listed  below,  under  the
       heading "Variables and subroutines for processing a rule".

       Examples  of  their  use is given in the following examples, concerning
       multiple index files and glossaries.

       The only index-file conversion built-in to latexmk is  from  an  ".idx"
       file  written on one run of *latex to an ".ind" file to be read in on a
       subsequent run.  But with the index.sty package, for example,  you  can
       create  extra indexes with extensions that you configure.  Latexmk does
       not know how to deduce the extensions from the information it has.  But
       you  can  easily  write a custom dependency.  For example if your latex
       file uses the command "\newindex{special}{ndx}{nnd}{Special index}" you
       will  need  to  get latexmk to convert files with the extension .ndx to
       .nnd.  The most elementary method is to define a custom  dependency  as
       follows:

           add_cus_dep( 'ndx', 'nnd', 0, 'ndx2nnd' );



                               18 November 2022                             68





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


           sub ndx2nnd {
               return system( "makeindex -o \"$_[0].nnd\" \"$_[0].ndx\"" );
           }
           push @generated_exts, 'ndx', 'nnd';

       Notice  the  added line compared with earlier examples.  The extra line
       gets the extensions "ndx" and "nnd" added to the list of extensions for
       generated files; then the extra index files will be deleted by clean-up
       operations

       But if you have yet more indexes with yet different  extensions,  e.g.,
       "adx"  and  "and", then you will need a separate function for each pair
       of extensions.  This is quite annoying.   You  can  use  the  Run_subst
       function to simplify the definitions to use a single function:

           add_cus_dep( 'ndx', 'nnd', 0, 'dx2nd' );
           add_cus_dep( 'adx', 'and', 0, 'dx2nd' );
           sub dx2nd {
               return Run_subst( "makeindex -o %D %S" );
           }
           push @generated_exts, 'ndx', 'nnd', 'adx', 'and';

       You could also instead use

           add_cus_dep( 'ndx', 'nnd', 0, 'dx2nd' );
           add_cus_dep( 'adx', 'and', 0, 'dx2nd' );
           sub dx2nd {
               return Run_subst( $makeindex );
           }
           push @generated_exts, 'ndx', 'nnd', 'adx', 'and';

       This  last example uses the command specification in $makeindex, and so
       any customization you have made for the standard index also applies  to
       your extra indexes.

       Similar techniques can be applied for glossaries.

       Those of you with experience with Makefiles, may get concerned that the
       .ndx file is written during a run of *latex and is  always  later  than
       the .nnd last read in.  Thus the .nnd appears to be perpetually out-of-
       date.  This situation, of circular dependencies, is endemic  to  latex,
       and  is  one  of the issues that latexmk is programmed to overcome.  It
       examines the contents of the files (by use of  a  checksum),  and  only
       does a remake when the file contents have actually changed.

       Of  course  if you choose to write random data to the .nnd (or the .aux
       file, etc) that changes on each new run, then you will have a  problem.
       For real experts: See the %hash_calc_ignore_pattern if you have to deal
       with such problems.


   Old Method of Defining Custom Dependencies:
       In much older versions of latexmk, the only method of  defining  custom
       dependencies   was   to   directly   manipulate  the  table  of  custom



                               18 November 2022                             69





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


       dependencies.  This is contained in the @cus_dep_list array.  It is  an
       array  of  strings,  and each string in the array has four items in it,
       each separated by a space, the from-extension,  the  to-extension,  the
       "must"  item, and the name of the subroutine for the custom dependency.
       These were all defined above.

       An example of the old method of defining custom dependencies is as fol-
       lows.  It  is  the code in an RC file to ensure automatic conversion of
       .fig files to .eps files:

           push @cus_dep_list, "fig eps 0 fig2eps";
           sub fig2eps {
               return system( "fig2dev -Lps \"$_[0].fig\" \"$_[0].eps\"" );
           }

       This method still works, and is almost equivalent  to  the  code  given
       earlier  that used the add_cus_dep subroutine.  However, the old method
       doesn't delete any previous custom-dependency for the same  conversion.
       So the new method is preferable.



ADVANCED CONFIGURATION: Some extra resources and advanced tricks
       For  most purposes, simple configuration for latexmk along the lines of
       the examples given is sufficient.  But  sometimes  you  need  something
       harder.   In this section, I indicate some extra possibilities.  Gener-
       ally to use these, you need to be fluent in the  Perl  language,  since
       this is what is used in the rc files.

       See  also the section DEALING WITH ERRORS, PROBLEMS, ETC.  See also the
       examples in the directory example_rcfiles in the latexmk distributions.
       Even if none of the examples apply to your case, they may give you use-
       ful ideas


   Utility subroutines
       ensure_path( var, values ...)

              The first parameter is the name of one of the system's  environ-
              ment  variables  for search paths.  The remaining parameters are
              values that should be in the variable.  For each  of  the  value
              parameters,  if  it  isn't  already  in the variable, then it is
              prepended to the variable; in that case the environment variable
              is  created  if it doesn't already exist. For separating values,
              the character appropriate the the operating system  is  used  --
              see the configuration variable $search_path_separator.

              Example:

                ensure_path( 'TEXINPUTS', './custom_cls_sty_files//' );

              (In this example, the trailing '//' is documented by TeX systems
              to mean that *latex search for files in the specified  directory
              and in all subdirectories.)



                               18 November 2022                             70





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


              Technically   ensure_path   works  by  setting  Perl's  variable
              $ENV{var}, where var is the name of the  target  variable.   The
              changed  value  is then passed as an environment variable to any
              invoked programs.


   Variables and subroutines for processing a rule
       A step in the processing is called a rule. One possibility to implement
       the  processing  of a rule is by a Perl subroutine.  This is always the
       case for custom dependencies. Also, for any other rule, you can  use  a
       subroutine  by  prefixing the command specification by the word "inter-
       nal" -- see the section FORMAT OF COMMAND SPECIFICATIONS.

       When you use a subroutine for processing a rule, all the  possibilities
       of Perl programming are available, of course.  In addition, some of la-
       texmk's internal variables and subroutines  are  available.   The  ones
       listed  below  are  intended  to  be available to (advanced) users, and
       their specifications will generally have stability under upgrades. Gen-
       erally,  the  variables  should be treated as read-only: Changing their
       values can have bad consequences, since it is liable  to  mess  up  the
       consistency of what latexmk is doing.

       $rule  This  variable  has  the  name of the rule, as known to latexmk.
              Note that the exact contents of this variable for a  given  rule
              may be dependent on the version of latexmk

       $$Psource
              This gives the name of the primary source file.  Note the double
              dollar signs.

       $$Pdest
              This gives the name of the main output file if  any.   Note  the
              double dollar signs.

       rdb_ensure_file( $rule, file )
              This  a subroutine that ensures that the given file is among the
              source files for the specified rule.  It is typically used when,
              during  the  processing of a rule, it is known that a particular
              extra file is among the dependencies that latexmk  should  know,
              but its default methods don't find the dependency. Almost always
              the first argument is the name of the rule currently being  pro-
              cessed, so it is then appropriate to specify it by $rule.

              For  examples of its use, see some of the files in the directory
              example_rcfiles of latexmk's distribution.  Currently the  cases
              that  use  this  subroutine  are bib2gls-latexmkrc, exceltex_la-
              texmkrc and texinfo-latexmkrc.  These illustrate  typical  cases
              where  latexmk's normal processing fails to detect certain extra
              source files.

       rdb_remove_files( $rule, file, ... )
              This subroutine removes one or more files  from  the  dependency
              list for the given rule.




                               18 November 2022                             71





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


       rdb_list_source( $rule )
              This  subroutine returns the list of source files (i.e., the de-
              pendency list) for the given rule.

       rdb_set_source( $rule, file, ... )

       rdb_set_source( $rule, @files )
              This subroutine sets the dependency list for the given  rule  to
              be the specified files.  Files that are already in the list have
              unchanged information.  Files that were  not  in  the  list  are
              added to it.  Files in the previous dependency list that are not
              in the newly specified list of files are removed from the depen-
              dency list.

       Run_subst( command_spec )
              This subroutine runs the command specified by command_spec.  The
              specification is a string in the format listed  in  the  section
              "Format  of Command Specifications".  An important action of the
              Run_subst is to make substitutions of placeholders, e.g., %S and
              %D  for  source and destination files; these get substituted be-
              fore the command is run.  In addition, the command after substi-
              tution  is  printed  to  the screen unless latexmk is running in
              silent mode.


   Coordinated Setting of Commands for *latex
       To set all of $dvilualatex, $latex, $pdflatex, $lualatex, and  $xelatex
       to  a  common  pattern,  you  can use one of the following subroutines,
       std_tex_cmds, alt_tex_cmds, and set_tex_cmds.

       They work as follows

          &std_tex_cmds;

       This results in $latex = 'latex %O %S', and similarly for $dvilualatex,
       $pdflatex,  $lualatex, and $xelatex.  Note the ampersand in the invoca-
       tion; this indicates to Perl that a subroutine is being called.

          &alt_tex_cmds;

       This results in $latex = 'latex %O %P', and similarly for $dvilualatex,
       $pdflatex,  $lualatex, and $xelatex.  Note the ampersand in the invoca-
       tion; this indicates to Perl that a subroutine is being called.

         set_tex_cmds( CMD_SPEC );

       Here CMD_SPEC is the command line without the program  name.  This  re-
       sults  in  $latex = 'latex CMD_SPEC', and similarly for $pdflatex, $lu-
       alatex, and $xelatex. An example would be

         set_tex_cmds( '--interaction=batchmode %O %S' );






                               18 November 2022                             72





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


   Advanced configuration: Using latexmk with make
       This section is targeted only at advanced users who use the  make  pro-
       gram for complex projects, as for software development, with the depen-
       dencies specified by a Makefile.

       Now the basic task of latexmk is to run  the  appropriate  programs  to
       make  a  viewable version of a LaTeX document.  However, the usual make
       program is not suited to this purpose for at least two reasons.   First
       is that the use of LaTeX involves circular dependencies (e.g., via .aux
       files), and these cannot be handled by the standard make program.  Sec-
       ond  is  that  in  a  large document the set of source files can change
       quite frequently, particularly with included graphics  files;  in  this
       situation  keeping a Makefile manually updated is inappropriate and er-
       ror-prone, especially when the dependencies can be determined automati-
       cally.  Latexmk solves both of these problems robustly.

       Thus  for  many  standard LaTeX documents latexmk can be used by itself
       without the make program.  In a complex project it simply needs  to  be
       suitably  configured.  A standard configuration would be to define cus-
       tom dependencies to make graphics files from their source files  (e.g.,
       as  created  by  the  xfig program).  Custom dependencies are latexmk's
       equivalent of pattern rules in Makefiles.

       Nevertheless there are projects for which a  Makefile  is  appropriate,
       and it is useful to know how to use latexmk from a Makefile.  A typical
       example would be to generate documentation for a software project.  Po-
       tentially  the  interaction  with the rest of the rules in the Makefile
       could be quite complicated, for example if some of the source files for
       a LaTeX document are generated by the project's software.

       In this section, I give a couple of examples of how latexmk can be use-
       fully invoked from a Makefile.  The examples use specific  features  of
       current  versions  of  GNU make, which is the default on both linux and
       OS-X systems.  They may need modifications for other versions of make.

       The simplest method is simply to delegate all the relevant tasks to la-
       texmk, as is suitable for a straightforward LaTeX document.  For this a
       suitable Makefile is like

           .PHONY : FORCE_MAKE
           all : try.pdf
           %.pdf : %.tex FORCE_MAKE
               latexmk -pdf -dvi- -ps- $<

       (Note: the last line must be introduced by a tab for  the  Makefile  to
       function  correctly!)  Naturally, if making try.pdf from its associated
       LaTeX file try.tex were the only task to be performed, a direct use  of
       latexmk  without  a  Makefile would normally be better.  The benefit of
       using a Makefile for a LaTeX document would be  in  a  larger  project,
       where lines such as the above would be only be a small part of a larger
       Makefile.

       The above example has a pattern rule for making a .pdf file from a .tex
       file,  and it is defined to use latexmk in the obvious way.  There is a



                               18 November 2022                             73





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


       conventional  default  target  named  "all",  with  a  prerequisite  of
       try.pdf.   So  when  make is invoked, by default it makes try.pdf.  The
       only complication is  that  there  may  be  many  source  files  beyond
       try.tex, but these aren't specified in the Makefile, so changes in them
       will not by themselves cause latexmk to be invoked.  Instead, the  pat-
       tern  rule is equipped with a "phony" prerequisite FORCE_MAKE; this has
       the effect of causing the rule to be always out-of-date,  so  that  la-
       texmk  is always run.  It is latexmk that decides whether any action is
       needed, e.g., a rerun of pdflatex.  Effectively the Makefile  delegates
       all  decisions  to  latexmk, while make has no knowledge of the list of
       source files except for primary LaTeX file for the  document.  If there
       are, for example, graphics files to be made, these must be made by cus-
       tom dependencies configured in latexmk.

       But something better is needed in more complicated situations, for  ex-
       ample, when the making of graphics files needs to be specified by rules
       in the Makefile.  To do this, one can use a Makefile like  the  follow-
       ing:

            TARGETS = document1.pdf document2.pdf
            DEPS_DIR = .deps
            LATEXMK = latexmk -recorder -use-make -deps \
                  -e 'warn qq(In Makefile, turn off custom dependencies\n);' \
                  -e '@cus_dep_list = ();' \
                  -e 'show_cus_dep();'
            all : $(TARGETS)
            $(foreach file,$(TARGETS),$(eval -include $(DEPS_DIR)/$(file)P))
            $(DEPS_DIR) :
                   mkdir $@
            %.pdf : %.tex
                   if [ ! -e $(DEPS_DIR) ]; then mkdir $(DEPS_DIR); fi
                   $(LATEXMK) -pdf -dvi- -ps- -deps-out=$(DEPS_DIR)/$@P $<
            %.pdf : %.fig
                   fig2dev -Lpdf $< $@

       (Again,  the  lines  containing  the  commands  for the rules should be
       started with tabs.)  This example was inspired by how GNU automake han-
       dles automatic dependency tracking of C source files.

       After  each  run of latexmk, dependency information is put in a file in
       the .deps subdirectory.  The Makefile causes these dependency files  to
       be read by make, which now has the full dependency information for each
       target .pdf file.  To make things less trivial it  is  specificed  that
       two  files document1.pdf and document2.pdf are the targets.  The depen-
       dency files are .deps/document1.pdfP and .deps/document2.pdfP.

       There is now no need for the phony prerequisite for the  rule  to  make
       .pdf files from .tex files.  But I have added a rule to make .pdf files
       from .fig files produced by the xfig program; these are  commonly  used
       for  graphics  insertions  in  LaTeX documents.  Latexmk is arranged to
       output a dependency file after each run.  It is given the -recorder op-
       tion,  which  improves its detection of files generated during a run of
       pdflatex; such files should not be in the dependency list.  The -e  op-
       tions  are  used  to  turn off all custom dependencies, and to document



                               18 November 2022                             74





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


       this.  Instead the -use-make is used to delegate the making of  missing
       files to make itself.

       Suppose  in  the LaTeX file there is a command \includegraphics{graph},
       and an xfig file "graph.fig" exists.  On a first run, pdflatex  reports
       a  missing  file, named "graph". Latexmk succeeds in making "graph.pdf"
       by calling "make graph.pdf", and after completion of its work, it lists
       "fig.pdf" among the dependents of the file latexmk is making.  Then let
       "fig.fig" be updated, and then let make be  run.   Make  first  remakes
       "fig.pdf", and only then reruns latexmk.

       Thus  we  now  have  a method by which all the subsidiary processing is
       delegated to make.


NON_ASCII CHARACTERS IN FILENAMES, RC FILES, ETC
       Modern operating systems and file systems allow non-ASCII characters in
       the  names  of  files  and  directories that encompass the full Unicode
       range.  Mostly, latexmk deals with these correctly.  However, there are
       some  situations in which there are problems, notably on Microsoft Win-
       dows.  Prior to version 4.77, latexmk had problems with non-ASCII file-
       names  on  Windows, even though there were no corresponding problems on
       macOS and Linux.  These problems are corrected in the present version.

       DETAILS TO BE FILLED IN



SEE ALSO
       latex(1), bibtex(1), lualatex(1), pdflatex(1), xelatex(1).


BUGS (SELECTED)
       Sometimes a viewer (gv) tries to read an updated .ps or .pdf file after
       its  creation is started but before the file is complete.  Work around:
       manually refresh (or reopen) display.  Or use one of the other preview-
       ers and update methods.

       (The  following  isn't  really a bug, but concerns features of preview-
       ers.)  Preview continuous mode only works perfectly with  certain  pre-
       viewers:  Xdvi  on  UNIX/Linux  works  for dvi files.  Gv on UNIX/Linux
       works for both postscript and pdf.  Ghostview  on  UNIX/Linux  needs  a
       manual  update (reopen); it views postscript and pdf.  Gsview under MS-
       Windows works for both postscript and pdf, but only reads  the  updated
       file  when  its  screen  is refreshed.  Acroread under UNIX/Linux views
       pdf, but the file needs to be closed and reopened to  view  an  updated
       version.   Under  MS-Windows,  acroread locks its input file and so the
       pdf file cannot be updated.  (Remedy: configure latexmk  to  use  suma-
       trapdf instead.)

THANKS TO
       Authors  of previous versions.  Many users with their feedback, and es-
       pecially David Coppit (username david at node coppit.org) who made many
       useful  suggestions  that contributed to version 3, and Herbert Schulz.



                               18 November 2022                             75





LATEXMK(1)                  General Commands Manual                 LATEXMK(1)


       (Please note that the e-mail addresses are not written in  their  stan-
       dard form to avoid being harvested too easily.)

AUTHOR
       Current  version,  by  John Collins (Version 4.78).  Report bugs etc to
       his e-mail (jcc8 at psu.edu).

       Released     version     can      be      obtained      from      CTAN:
       <http://www.ctan.org/pkg/latexmk/>,   and  from  the  author's  website
       <http://www.personal.psu.edu/jcc8/latexmk/>.
       Modifications and enhancements by Evan McLean (Version 2.0)
       Original script called "go" by David J. Musliner (RCS Version 3.2)













































                               18 November 2022                             76


