"LAMMPS WWW Site"_lws - "LAMMPS Documentation"_ld - "LAMMPS Commands"_lc :c

:link(lws,http://lammps.sandia.gov)
:link(ld,Manual.html)
:link(lc,Section_commands.html#comm)

:line

pair_style gauss command :h3
pair_style gauss/gpu command :h3
pair_style gauss/omp command :h3
pair_style gauss/cut command :h3
pair_style gauss/cut/omp command :h3

[Syntax:] 

pair_style gauss cutoff
pair_style gauss/cut cutoff :pre

cutoff = global cutoff for Gauss interactions (distance units) :ul

[Examples:] 

pair_style gauss 12.0 
pair_coeff * * 1.0 0.9
pair_coeff 1 4 1.0 0.9 10.0 :pre

pair_style gauss/cut 3.5
pair_coeff 1 4 0.2805 1.45 0.112 :pre


[Description:] 

Style {gauss} computes a tethering potential of the form

:c,image(Eqs/pair_gauss.jpg)

between an atom and its corresponding tether site which will typically
be a frozen atom in the simulation.  Rc is the cutoff.

The following coefficients must be defined for each pair of atom types
via the "pair_coeff"_pair_coeff.html command as in the examples above,
or in the data file or restart files read by the
"read_data"_read_data.html or "read_restart"_read_restart.html
commands:

A (energy units)
B (1/distance^2 units) 
cutoff (distance units) :ul 

The last coefficient is optional. If not specified, the global cutoff
is used.

Style {gauss/cut} computes a generalized Gaussian interaction potential 
between pairs of particles:

:c,image(Eqs/pair_gauss_cut.jpg)

where H determines together with the standard deviation sigma_h the
peak height of the Gaussian function, and r_mh the peak position.
Examples of the use of the Gaussian potentials include implicit
solvent simulations of salt ions "(Lenart)"_#Lenart and of surfactants
"(Jusufi)"_#Jusufi.  In these instances the Gaussian potential mimics
the hydration barrier between a pair of particles. The hydration
barrier is located at r_mh and has a width of sigma_h. The prefactor
determines the hight of the potential barrier.

The following coefficients must be defined for each pair of atom types
via the "pair_coeff"_pair_coeff.html command as in the example above,
or in the data file or restart files read by the
"read_data"_read_data.html or "read_restart"_read_restart.html
commands:

H (energy * distance units)
r_mh (distance units)
sigma_h (distance units) :ul

The global cutoff (r_c) specified in the pair_style command is used.

:line

Styles with a {cuda}, {gpu}, {omp}, or {opt} suffix are functionally
the same as the corresponding style without the suffix.  They have
been optimized to run faster, depending on your available hardware, as
discussed in "Section_accelerate"_Section_accelerate.html of the
manual.  The accelerated styles take the same arguments and should
produce the same results, except for round-off and precision issues.

These accelerated styles are part of the USER-CUDA, GPU, USER-OMP and OPT
packages, respectively.  They are only enabled if LAMMPS was built with
those packages.  See the "Making LAMMPS"_Section_start.html#start_3
section for more info.

You can specify the accelerated styles explicitly in your input script
by including their suffix, or you can use the "-suffix command-line
switch7_Section_start.html#start_6 when you invoke LAMMPS, or you can
use the "suffix"_suffix.html command in your input script.

See "Section_accelerate"_Section_accelerate.html of the manual for
more instructions on how to use the accelerated styles effectively.

:line

[Mixing, shift, table, tail correction, restart, rRESPA info]:

These pair style do not support mixing.  Thus, coefficients for all
I,J pairs must be specified explicitly.

The {gauss} style does not support the "pair_modify"_pair_modify.html
shift option. There is no effect due to the Gaussian well beyond the
cutoff; hence reasonable cutoffs need to be specified.

The {gauss/cut} style supports the "pair_modify"_pair_modify.html shift
option for the energy of the Gauss-potential portion of the pair
interaction.

The "pair_modify"_pair_modify.html table and tail options are not
relevant for this pair style.

This pair style does not support the "pair_modify"_pair_modify.html
table option, since a tabulation capability does not exist for this
potential.

This pair style writes its information to "binary restart
files"_restart.html, so pair_style and pair_coeff commands do not need
to be specified in an input script that reads a restart file.

This pair style can only be used via the {pair} keyword of the
"run_style respa"_run_style.html command.  It does not support the
{inner}, {middle}, {outer} keywords.

Thes {gauss} pair style tallies an "occupancy" count of how many Gaussian-well
sites have an atom within the distance at which the force is a maximum
= sqrt(0.5/b).  This quantity can be accessed via the "compute
pair"_compute_pair.html command as a vector of values of length 1.

To print this quantity to the log file (with a descriptive column
heading) the following commands could be included in an input script:

compute gauss all pair gauss
variable occ equal c_gauss\[1\]
thermo_style custom step temp epair v_occ :pre

:line

[Restrictions:]

The {gauss/cut} style is part of the "user-misc" package. It is only
enabled if LAMMPS is build with that package. See the "Making of
LAMMPS"_Section_start.html#3 section for more info.

[Related commands:]

"pair_coeff"_pair_coeff.html, 
"pair_style coul/diel"_pair_coul_diel.html

[Default:] none
