Source: hackrf
Section: libs
Priority: optional
Maintainer: A. Maitland Bottoms <bottoms@debian.org>
Build-Depends: cmake,
               debhelper-compat (= 13),
               libfftw3-dev,
               libusb-1.0-0-dev [linux-any],
               libusb-dev [hurd-i386],
               libusb2-dev [kfreebsd-any],
               pkg-config
Build-Depends-Indep: dfu-util,
		     latexmk,
                     python3-sphinx,
                     python3-sphinx-rtd-theme,
		     python3-yaml,
                     tex-gyre,
                     texlive-latex-extra,
		     gcc-arm-none-eabi,
                     libnewlib-arm-none-eabi,
                     libstdc++-arm-none-eabi-newlib
Standards-Version: 4.6.2
Rules-Requires-Root: no
Homepage: http://greatscottgadgets.com/hackrf/
Vcs-Browser: https://salsa.debian.org/bottoms/pkg-hackrf
Vcs-Git: https://salsa.debian.org/bottoms/pkg-hackrf.git

Package: hackrf-doc
Section: doc
Architecture: all
Depends: fonts-font-awesome,
         fonts-lato,
         fonts-roboto-slab,
         libjs-jquery,
         libjs-underscore,
         sphinx,
         ${misc:Depends}
Description: Software defined radio peripheral - documentation
 HackRF is an open source Software Defined Radio that can receive
 and transmit between 30 MHz and 6 GHz. HackRF has a 20 MHz bandwidth.
 It is a High Speed USB device powered by the USB bus.
 .
 This package contains generated documentation.

Package: libhackrf-dev
Section: libdevel
Architecture: any
Pre-Depends: ${misc:Pre-Depends}
Depends: libhackrf0 (= ${binary:Version}), ${misc:Depends}
Description: Software defined radio peripheral - development
 HackRF is an open source Software Defined Radio that can receive
 and transmit between 30 MHz and 6 GHz. HackRF has a 20 MHz bandwidth.
 It is a High Speed USB device powered by the USB bus.
 .
 This package contains development files.

Package: libhackrf0
Architecture: any
Pre-Depends: ${misc:Pre-Depends}
Depends: ${misc:Depends}, ${shlibs:Depends}
Multi-Arch: same
Description: Software defined radio peripheral - runtime library
 HackRF is an open source Software Defined Radio that can receive
 and transmit between 30 MHz and 6 GHz. HackRF has a 20 MHz bandwidth.
 It is a High Speed USB device powered by the USB bus.
 .
 This package contains the shared library.

Package: hackrf
Section: comm
Architecture: any
Depends: libhackrf0 (= ${binary:Version}), ${misc:Depends}, ${shlibs:Depends}
Description: Software defined radio peripheral - utilities
 HackRF is an open source Software Defined Radio that can receive
 and transmit between 30 MHz and 6 GHz. HackRF has a 20 MHz bandwidth.
 It is a High Speed USB device powered by the USB bus.
 .
 This package contains a set of command line utilities:
  * hackrf_clock: HackRF clock configuration utility
  * hackrf_cpldjtag: program CLPD
  * hackrf_debug: chip register read/write/config tool
  * hackrf_info: probe device and show configuration
  * hackrf_operacake: control of operacake board via hackrf
  * hackrf_spiflash: read and write flash data from file.
  * hackrf_sweep: control frequency sweep of hackrf
  * hackrf_transfer: file based transmit and receive sdr

Package: hackrf-firmware
Architecture: all
Multi-Arch: foreign
Depends: ${misc:Depends}
Recommends: hackrf
Suggests: dfu-util
Description: Firmware for HackRF devices
 The HackRF hardware needs some firmware to run. The firmware is built with
 arm-none-eabi-gcc. This package contains a number of firmware images that
 may be programmed into the HackRF hardware using the 'hackrf_spiflash -w'
 command or dfu-util.
 .
 The following hardware is supported:
  * hackrf_jawbreaker
  * hackrf_one
  * hackrf_rad1o
 .
 The firmware images are installed in /usr/share/hackrf/firmware/
