2020-01-24  Hans-Peter Nilsson  <hp@axis.com>

	* target.def (flags_regnum): Also mention effect on delay slot filling.
	* doc/tm.texi: Regenerate.

2020-01-23  Jeff Law  <law@redhat.com>

	* config/h8300/h8300.c (h8300_option_override): Fix diagnostic text.

2020-01-23  Mikael Tillenius  <mti-1@tillenius.com>

	* config/h8300/h8300.h (FUNCTION_PROFILER): Fix emission of
	profiling label

2020-01-23  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/93402
	* postreload.c (reload_combine_recognize_pattern): Don't try to adjust
	USE insns.

2020-01-23  Dragan Mladjenovic  <dmladjenovic@wavecomp.com>

	* config.in: Regenerated.
	* config/mips/linux.h (NEED_INDICATE_EXEC_STACK): Define to 1
	for TARGET_LIBC_GNUSTACK.
	* configure: Regenerated.
	* configure.ac: Define TARGET_LIBC_GNUSTACK if glibc version is
	found to be 2.31 or greater.

2020-01-23  Dragan Mladjenovic  <dmladjenovic@wavecomp.com>

	* config/mips/linux.h (NEED_INDICATE_EXEC_STACK): Define to
	TARGET_SOFT_FLOAT.
	* config/mips/mips.c (TARGET_ASM_FILE_END): Define to ...
	(mips_asm_file_end): New function. Delegate to
	file_end_indicate_exec_stack if NEED_INDICATE_EXEC_STACK is true.
	* config/mips/mips.h (NEED_INDICATE_EXEC_STACK): Define to 0.

2020-01-23  Jakub Jelinek  <jakub@redhat.com>

	PR target/93376
	* config/i386/i386-modes.def (POImode): New mode.
	(MAX_BITSIZE_MODE_ANY_INT): Change from 128 to 160.
	* config/i386/i386.md (DPWI): New mode attribute.
	(addv<mode>4, subv<mode>4): Use <DPWI> instead of <DWI>.
	(QWI): Rename to...
	(QPWI): ... this.  Use POI instead of OI for TImode.
	(*addv<dwi>4_doubleword, *addv<dwi>4_doubleword_1,
	*subv<dwi>4_doubleword, *subv<dwi>4_doubleword_1): Use <QPWI>
	instead of <QWI>.

2020-01-23  Richard Sandiford  <richard.sandiford@arm.com>

	PR target/93341
	* config/aarch64/aarch64.md (UNSPEC_SPECULATION_TRACKER_REV): New
	unspec.
	(speculation_tracker_rev): New pattern.
	* config/aarch64/aarch64-speculation.cc (aarch64_do_track_speculation):
	Use speculation_tracker_rev to track the inverse condition.

2020-01-23  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/93381
	* tree-ssa-sccvn.c (vn_walk_cb_data::push_partial_def): Take
	alias-set of the def as argument and record the first one.
	(vn_walk_cb_data::first_set): New member.
	(vn_reference_lookup_3): Pass the alias-set of the current def
	to push_partial_def.  Fix alias-set used in the aggregate copy
	case.
	(vn_reference_lookup): Consistently set *last_vuse_ptr.
	* real.c (clear_significand_below): Fix out-of-bound access.

2020-01-23  Jakub Jelinek  <jakub@redhat.com>

	PR target/93346
	* config/i386/i386.md (*bmi2_bzhi_<mode>3_2, *bmi2_bzhi_<mode>3_3):
	New define_insn patterns.

2020-01-23  Richard Sandiford  <richard.sandiford@arm.com>

	* doc/sourcebuild.texi (check-function-bodies): Add an
	optional target/xfail selector.

2020-01-23  Richard Sandiford  <richard.sandiford@arm.com>

	PR rtl-optimization/93124
	* auto-inc-dec.c (merge_in_block): Don't add auto inc/decs to
	bare USE and CLOBBER insns.

2020-01-22  Andrew Pinski  <apinski@marvell.com>

	* config/arc/arc.c (output_short_suffix): Check insn for nullness.

2020-01-22  David Malcolm  <dmalcolm@redhat.com>

	PR analyzer/93307
	* gdbinit.in (break-on-saved-diagnostic): Update for move of
	diagnostic_manager into "ana" namespace.
	* selftest-run-tests.c (selftest::run_tests): Update for move of
	selftest::run_analyzer_selftests to
	ana::selftest::run_analyzer_selftests.

2020-01-22  Richard Sandiford  <richard.sandiford@arm.com>

	* cfgexpand.c (union_stack_vars): Update the size.

2020-01-22  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/93381
	* tree-ssa-structalias.c (find_func_aliases): Assume offsetting
	throughout, handle all conversions the same.

2020-01-22  Jakub Jelinek  <jakub@redhat.com>

	PR target/93335
	* config/aarch64/aarch64.c (aarch64_expand_subvti): Only use
	gen_subdi3_compare1_imm if low_in2 satisfies aarch64_plus_immediate
	predicate, not whenever it is CONST_INT.  Otherwise, force_reg it.
	Call force_reg on high_in2 unconditionally.

2020-01-22  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/92924
	* profile.c (compute_value_histograms): Divide
	all counter values.

2020-01-22  Jakub Jelinek  <jakub@redhat.com>

	PR target/91298
	* output.h (assemble_name_resolve): Declare.
	* varasm.c (assemble_name_resolve): New function.
	(assemble_name): Use it.
	* config/i386/i386.h (ASM_OUTPUT_SYMBOL_REF): Define.

2020-01-22  Joseph Myers  <joseph@codesourcery.com>

	* doc/sourcebuild.texi (Texinfo Manuals, Front End): Refer to
	update_web_docs_git instead of update_web_docs_svn.

2020-01-21  Andrew Pinski  <apinski@marvell.com>

	PR target/9311
	* config/aarch64/aarch64.md (tlsgd_small_<mode>): Have operand 0
	as PTR mode. Have operand 1 as being modeless, it can be P mode.
	(*tlsgd_small_<mode>): Likewise.
	* config/aarch64/aarch64.c (aarch64_load_symref_appropriately)
	<case SYMBOL_SMALL_TLSGD>: Call gen_tlsgd_small_* with a ptr_mode
	register.  Convert that register back to dest using convert_mode.

2020-01-21  Jim Wilson  <jimw@sifive.com>

	* config/riscv/riscv-sr.c (riscv_sr_match_prologue): Use INTVAL
	instead of XINT.

2020-01-21  H.J. Lu  <hongjiu.lu@intel.com>
	    Uros Bizjak    <ubizjak@gmail.com>

	PR target/93319
	* config/i386/i386.c (ix86_tls_module_base): Replace Pmode
	with ptr_mode.
	(legitimize_tls_address): Do GNU2 TLS address computation in
	ptr_mode and zero-extend result to Pmode.
	*  config/i386/i386.md (@tls_dynamic_gnu2_64_<mode>): Replace
	:P with :PTR and Pmode with ptr_mode.
	(*tls_dynamic_gnu2_lea_64_<mode>): Likewise.
	(*tls_dynamic_gnu2_call_64_<mode>): Likewise.
	(*tls_dynamic_gnu2_combine_64_<mode>): Likewise.

2020-01-21  Jakub Jelinek  <jakub@redhat.com>

	PR target/93333
	* config/riscv/riscv.c (riscv_rtx_costs) <case ZERO_EXTRACT>: Verify
	the last two operands are CONST_INT_P before using them as such.

2020-01-21  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve-builtins.def: Use get_typenode_from_name
	to get the integer element types.

2020-01-21  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve-builtins.h
	(function_expander::convert_to_pmode): Declare.
	* config/aarch64/aarch64-sve-builtins.cc
	(function_expander::convert_to_pmode): New function.
	(function_expander::get_contiguous_base): Use it.
	(function_expander::prepare_gather_address_operands): Likewise.
	* config/aarch64/aarch64-sve-builtins-sve2.cc
	(svwhilerw_svwhilewr_impl::expand): Likewise.

2020-01-21  Szabolcs Nagy  <szabolcs.nagy@arm.com>

	PR target/92424
	* config/aarch64/aarch64.c (aarch64_declare_function_name): Set
	cfun->machine->label_is_assembled.
	(aarch64_print_patchable_function_entry): New.
	(TARGET_ASM_PRINT_PATCHABLE_FUNCTION_ENTRY): Define.
	* config/aarch64/aarch64.h (struct machine_function): New field,
	label_is_assembled.

2020-01-21  David Malcolm  <dmalcolm@redhat.com>

	PR ipa/93315
	* ipa-profile.c (ipa_profile): Delete call_sums and set it to
	NULL on exit.

2020-01-18  Jan Hubicka  <hubicka@ucw.cz>

	PR lto/93318	
	* cgraph.c (cgraph_edge::resolve_speculation,
	cgraph_edge::redirect_call_stmt_to_callee): Fix update of
	call_stmt_site_hash.

2020-01-21  Martin Liska  <mliska@suse.cz>

	* config/rs6000/rs6000.c (common_mode_defined): Remove
	unused variable.

2020-01-21  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92328
	* tree-ssa-sccvn.c (vn_reference_lookup_3): Preserve
	type when value-numbering same-sized store by inserting a
	VIEW_CONVERT_EXPR.
	(eliminate_dom_walker::eliminate_stmt): When eliminating
	a redundant store handle bit-reinterpretation of the same value.

2020-01-21  Andrew Pinski  <apinski@marvel.com>

	PR tree-opt/93321
	* tree-into-ssa.c (prepare_block_for_update_1): Split out
	from ...
	(prepare_block_for_update): This.  Use a worklist instead of
	recursing.

2020-01-21  Mihail-Calin Ionescu  <mihail.ionescu@arm.com>

	* gcc/config/arm/arm.c (clear_operation_p):
	Initialise last_regno, skip first iteration
	based on the first_set value and use ints instead
	of the unnecessary HOST_WIDE_INTs.

2020-01-21  Jakub Jelinek  <jakub@redhat.com>

	PR target/93073
	* config/rs6000/rs6000.c (rs6000_emit_cmove): If using fsel, punt for
	compare_mode other than SFmode or DFmode.

2020-01-21  Kito Cheng  <kito.cheng@sifive.com>

	PR target/93304
	* config/riscv/riscv-protos.h (riscv_hard_regno_rename_ok): New.
	* config/riscv/riscv.c (riscv_hard_regno_rename_ok): New.
	* config/riscv/riscv.h (HARD_REGNO_RENAME_OK): Defined.

2020-01-20  Wilco Dijkstra  <wdijkstr@arm.com>

	* config/aarch64/aarch64.c (neoversen1_tunings): Set jump_align to 4.

2020-01-20  Andrew Pinski  <apinski@marvell.com>

	PR middle-end/93242
	* targhooks.c (default_print_patchable_function_entry): Use
	output_asm_insn to emit the nop instruction.

2020-01-20  Fangrui Song  <maskray@google.com>

	PR middle-end/93194
	* targhooks.c (default_print_patchable_function_entry): Align to
	POINTER_SIZE.

2020-01-20  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/93319
	* config/i386/i386.c (legitimize_tls_address): Pass Pmode to
	gen_tls_dynamic_gnu2_64.  Compute GNU2 TLS address in ptr_mode.
	* config/i386/i386.md (tls_dynamic_gnu2_64): Renamed to ...
	(@tls_dynamic_gnu2_64_<mode>): This.  Replace DI with P.
	(*tls_dynamic_gnu2_lea_64): Renamed to ...
	(*tls_dynamic_gnu2_lea_64_<mode>): This.  Replace DI with P.
	Remove the {q} suffix from lea.
	(*tls_dynamic_gnu2_call_64): Renamed to ...
	(*tls_dynamic_gnu2_call_64_<mode>): This.  Replace DI with P.
	(*tls_dynamic_gnu2_combine_64): Renamed to ...
	(*tls_dynamic_gnu2_combine_64_<mode>): This.  Replace DI with P.
	Pass Pmode to gen_tls_dynamic_gnu2_64.

2020-01-20  Wilco Dijkstra  <wdijkstr@arm.com>

	* config/aarch64/aarch64.h (SLOW_BYTE_ACCESS): Set to 1.

2020-01-20  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve-builtins-base.cc
	(svld1ro_impl::memory_vector_mode): Remove parameter name.

2020-01-20  Richard Biener  <rguenther@suse.de>

	PR debug/92763
	* dwarf2out.c (prune_unused_types): Unconditionally mark
	called function DIEs.

2020-01-20  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/93199
	* tree-eh.c (struct leh_state): Add
	new field outer_non_cleanup.
	(cleanup_is_dead_in): Pass leh_state instead
	of eh_region.  Add a checking that state->outer_non_cleanup
	points to outer non-clean up region.
	(lower_try_finally): Record outer_non_cleanup
	for this_state.
	(lower_catch): Likewise.
	(lower_eh_filter): Likewise.
	(lower_eh_must_not_throw): Likewise.
	(lower_cleanup): Likewise.

2020-01-20  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/93094
	* tree-vectorizer.h (vect_loop_versioning): Adjust.
	(vect_transform_loop): Likewise.
	* tree-vectorizer.c (try_vectorize_loop_1): Pass down
	loop_vectorized_call to vect_transform_loop.
	* tree-vect-loop.c (vect_transform_loop): Pass down
	loop_vectorized_call to vect_loop_versioning.
	* tree-vect-loop-manip.c (vect_loop_versioning): Use
	the earlier discovered loop_vectorized_call.

2020-01-19  Eric S. Raymond <esr@thyrsus.com>

	* doc/contribute.texi: Update for SVN -> Git transition.
	* doc/install.texi: Likewise.

2020-01-18  Jan Hubicka  <hubicka@ucw.cz>

	PR lto/93318
	* cgraph.c (cgraph_edge::make_speculative): Increase number of
	speculative targets.
	(verify_speculative_call): New function
	(cgraph_node::verify_node): Use it.
	* ipa-profile.c (ipa_profile): Fix formating; do not set number of
	speculations.

2020-01-18  Jan Hubicka  <hubicka@ucw.cz>

	PR lto/93318
	* cgraph.c (cgraph_edge::resolve_speculation): Fix foramting.
	(cgraph_edge::make_direct): Remove all indirect targets.
	(cgraph_edge::redirect_call_stmt_to_callee): Use make_direct..
	(cgraph_node::verify_node): Verify that only one call_stmt or
	lto_stmt_uid is set.
	* cgraphclones.c (cgraph_edge::clone): Set only one call_stmt or
	lto_stmt_uid.
	* lto-cgraph.c (lto_output_edge): Simplify streaming of stmt.
	(lto_output_ref): Simplify streaming of stmt.
	* lto-streamer-in.c (fixup_call_stmt_edges_1): Clear lto_stmt_uid.

2020-01-18  Tamar Christina  <tamar.christina@arm.com>

	* config/aarch64/aarch64-sve-builtins-base.cc (memory_vector_mode):
	Mark parameter unused.

2020-01-18  Hans-Peter Nilsson  <hp@axis.com>

	* config.gcc <obsolete targets>: Add crisv32-*-* and cris-*-linux*

2019-01-18  Gerald Pfeifer  <gerald@pfeifer.com>

	* varpool.c (ctor_useable_for_folding_p): Fix grammar.

2020-01-18  Iain Sandoe  <iain@sandoe.co.uk>

	* Makefile.in: Add coroutine-passes.o.
	* builtin-types.def (BT_CONST_SIZE): New.
	(BT_FN_BOOL_PTR): New.
	(BT_FN_PTR_PTR_CONST_SIZE_BOOL): New.
	* builtins.def (DEF_COROUTINE_BUILTIN): New.
	* coroutine-builtins.def: New file.
	* coroutine-passes.cc: New file.
	* function.h (struct GTY function): Add a bit to indicate that the
	function is a coroutine component.
	* internal-fn.c (expand_CO_FRAME): New.
	(expand_CO_YIELD): New.
	(expand_CO_SUSPN): New.
	(expand_CO_ACTOR): New.
	* internal-fn.def (CO_ACTOR): New.
	(CO_YIELD): New.
	(CO_SUSPN): New.
	(CO_FRAME): New.
	* passes.def: Add pass_coroutine_lower_builtins,
	pass_coroutine_early_expand_ifns.
	* tree-pass.h (make_pass_coroutine_lower_builtins): New.
	(make_pass_coroutine_early_expand_ifns): New.
	* doc/invoke.texi: Document the fcoroutines command line
	switch.

2020-01-18  Jakub Jelinek  <jakub@redhat.com>

	* config/arm/vfp.md (*clear_vfp_multiple): Remove unused variable.

	PR target/93312
	* config/arm/arm.c (clear_operation_p): Don't use REGNO until
	after checking the argument is a REG.  Don't use REGNO (reg)
	again to set last_regno, reuse regno variable instead.

2020-01-17  David Malcolm  <dmalcolm@redhat.com>

	* doc/analyzer.texi (Limitations): Add note about NaN.

2020-01-17  Mihail-Calin Ionescu  <mihail.ionescu@arm.com>
	    Sudakshina Das  <sudi.das@arm.com>

	* config/arm/arm.md (ashldi3): Generate thumb2_lsll for both reg
	and valid immediate.
	(ashrdi3): Generate thumb2_asrl for both reg and valid immediate.
	(lshrdi3): Generate thumb2_lsrl for valid immediates.
	* config/arm/constraints.md (Pg): New.
	* config/arm/predicates.md (long_shift_imm): New.
	(arm_reg_or_long_shift_imm): Likewise.
	* config/arm/thumb2.md (thumb2_asrl): New immediate alternative.
	(thumb2_lsll): Likewise.
	(thumb2_lsrl): New.

2020-01-17  Mihail-Calin Ionescu  <mihail.ionescu@arm.com>
	    Sudakshina Das  <sudi.das@arm.com>

	* config/arm/arm.md (ashldi3): Generate thumb2_lsll for TARGET_HAVE_MVE.
	(ashrdi3): Generate thumb2_asrl for TARGET_HAVE_MVE.
	* config/arm/arm.c (arm_hard_regno_mode_ok): Allocate even odd
	register pairs for doubleword quantities for ARMv8.1M-Mainline.
	* config/arm/thumb2.md (thumb2_asrl): New.
	(thumb2_lsll): Likewise.

2020-01-17  Jakub Jelinek  <jakub@redhat.com>

	* config/arm/arm.c (cmse_nonsecure_call_inline_register_clear): Remove
	unused variable.

2020-01-17  Alexander Monakov  <amonakov@ispras.ru>

	* gdbinit.in (help-gcc-hooks): New command.
	(pp, pr, prl, pt, pct, pgg, pgq, pgs, pge, pmz, ptc, pdn, ptn, pdd, prc,
	pi, pbm, pel, trt): Take $arg0 instead of $ if supplied. Update
	documentation.

2020-01-17  Matthew Malcomson  <matthew.malcomson@arm.com>

	* config/aarch64/aarch64-sve.md (@aarch64_sve_ld1ro<mode>): Use the
	correct target macro.

2020-01-17  Matthew Malcomson  <matthew.malcomson@arm.com>

	* config/aarch64/aarch64-protos.h
	(aarch64_sve_ld1ro_operand_p): New.
	* config/aarch64/aarch64-sve-builtins-base.cc
	(class load_replicate): New.
	(class svld1ro_impl): New.
	(class svld1rq_impl): Change to inherit from load_replicate.
	(svld1ro): New sve intrinsic function base.
	* config/aarch64/aarch64-sve-builtins-base.def (svld1ro):
	New DEF_SVE_FUNCTION.
	* config/aarch64/aarch64-sve-builtins-base.h
	(svld1ro): New decl.
	* config/aarch64/aarch64-sve-builtins.cc
	(function_expander::add_mem_operand): Modify assert to allow
	OImode.
	* config/aarch64/aarch64-sve.md (@aarch64_sve_ld1ro<mode>): New
	pattern.
	* config/aarch64/aarch64.c
	(aarch64_sve_ld1rq_operand_p): Implement in terms of ...
	(aarch64_sve_ld1rq_ld1ro_operand_p): This.
	(aarch64_sve_ld1ro_operand_p): New.
	* config/aarch64/aarch64.md (UNSPEC_LD1RO): New unspec.
	* config/aarch64/constraints.md (UOb,UOh,UOw,UOd): New.
	* config/aarch64/predicates.md
	(aarch64_sve_ld1ro_operand_{b,h,w,d}): New.

2020-01-17  Matthew Malcomson  <matthew.malcomson@arm.com>

	* config/aarch64/aarch64-c.c (_ARM_FEATURE_MATMUL_FLOAT64):
	Introduce this ACLE specified predefined macro.
	* config/aarch64/aarch64-option-extensions.def (f64mm): New.
	(fp): Disabling this disables f64mm.
	(simd): Disabling this disables f64mm.
	(fp16): Disabling this disables f64mm.
	(sve): Disabling this disables f64mm.
	* config/aarch64/aarch64.h (AARCH64_FL_F64MM): New.
	(AARCH64_ISA_F64MM): New.
	(TARGET_F64MM): New.
	* doc/invoke.texi (f64mm): Document new option.

2020-01-17  Wilco Dijkstra  <wdijkstr@arm.com>

	* config/aarch64/aarch64.c (generic_tunings): Add branch fusion.
	(neoversen1_tunings): Likewise.

2020-01-17  Wilco Dijkstra  <wdijkstr@arm.com>

	PR target/92692
	* config/aarch64/aarch64.c (aarch64_split_compare_and_swap)
	Add assert to ensure prolog has been emitted.
	(aarch64_split_atomic_op): Likewise.
	* config/aarch64/atomics.md (aarch64_compare_and_swap<mode>)
	Use epilogue_completed rather than reload_completed.
	(aarch64_atomic_exchange<mode>): Likewise.
	(aarch64_atomic_<atomic_optab><mode>): Likewise.
	(atomic_nand<mode>): Likewise.
	(aarch64_atomic_fetch_<atomic_optab><mode>): Likewise.
	(atomic_fetch_nand<mode>): Likewise.
	(aarch64_atomic_<atomic_optab>_fetch<mode>): Likewise.
	(atomic_nand_fetch<mode>): Likewise.

2020-01-17  Richard Sandiford  <richard.sandiford@arm.com>

	PR target/93133
	* config/aarch64/aarch64.h (REVERSIBLE_CC_MODE): Return false
	for FP modes.
	(REVERSE_CONDITION): Delete.
	* config/aarch64/iterators.md (CC_ONLY): New mode iterator.
	(CCFP_CCFPE): Likewise.
	(e): New mode attribute.
	* config/aarch64/aarch64.md (ccmp<GPI:mode>): Rename to...
	(@ccmp<CC_ONLY:mode><GPI:mode>): ...this, using CC_ONLY instead of CC.
	(fccmp<GPF:mode>, fccmpe<GPF:mode>): Merge into...
	(@ccmp<CCFP_CCFPE:mode><GPF:mode>): ...this combined pattern.
	(@ccmp<CC_ONLY:mode><GPI:mode>_rev): New pattern.
	(@ccmp<CCFP_CCFPE:mode><GPF:mode>_rev): Likewise.
	* config/aarch64/aarch64.c (aarch64_gen_compare_reg): Update
	name of generator from gen_ccmpdi to gen_ccmpccdi.
	(aarch64_gen_ccmp_next): Use code_for_ccmp.  If we want to reverse
	the previous comparison but aren't able to, use the new ccmp_rev
	patterns instead.

2020-01-17  Richard Sandiford  <richard.sandiford@arm.com>

	* gimplify.c (gimplify_return_expr): Use poly_int_tree_p rather
	than testing directly for INTEGER_CST.
	(gimplify_target_expr, gimplify_omp_depend): Likewise.

2020-01-17  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/93292
	* tree-vect-stmts.c (vectorizable_comparison): Punt also if
	get_vectype_for_scalar_type returns NULL.

2020-01-16  Jan Hubicka  <hubicka@ucw.cz>

	* params.opt (-param=max-predicted-iterations): Increase range from 0.
	* predict.c (estimate_loops): Add 1 to param_max_predicted_iterations.

2020-01-16  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-fnsummary.c (estimate_calls_size_and_time): Fix formating of
	dump.
	* params.opt: (max-predicted-iterations): Set bounds.
	* predict.c (real_almost_one, real_br_prob_base,
	real_inv_br_prob_base, real_one_half, real_bb_freq_max): Remove.
	(propagate_freq): Add max_cyclic_prob parameter; cap cyclic
	probabilities; do not truncate to reg_br_prob_bases.
	(estimate_loops_at_level): Pass max_cyclic_prob.
	(estimate_loops): Compute max_cyclic_prob.
	(estimate_bb_frequencies): Do not initialize real_*; update calculation
	of back edge prob.
	* profile-count.c (profile_probability::to_sreal): New.
	* profile-count.h (class sreal): Move up in file.
	(profile_probability::to_sreal): Declare.

2020-01-16  Stam Markianos-Wright  <stam.markianos-wright@arm.com>

	* config/arm/arm.c
	(arm_invalid_conversion): New function for target hook.
	(arm_invalid_unary_op): New function for target hook.
	(arm_invalid_binary_op): New function for target hook.

2020-01-16  Stam Markianos-Wright  <stam.markianos-wright@arm.com>

	* config.gcc: Add arm_bf16.h.
	* config/arm/arm-builtins.c (arm_mangle_builtin_type): Fix comment.
	(arm_simd_builtin_std_type): Add BFmode.
	(arm_init_simd_builtin_types): Define element types for vector types.
	(arm_init_bf16_types): New function.
	(arm_init_builtins): Add arm_init_bf16_types function call.
	* config/arm/arm-modes.def: Add BFmode and V4BF, V8BF vector modes.
	* config/arm/arm-simd-builtin-types.def: Add V4BF, V8BF.
	* config/arm/arm.c (aapcs_vfp_sub_candidate):  Add BFmode.
	(arm_hard_regno_mode_ok): Add BFmode and tidy up statements.
	(arm_vector_mode_supported_p): Add V4BF, V8BF.
	(arm_mangle_type):  Add __bf16.
	* config/arm/arm.h: Add V4BF, V8BF to VALID_NEON_DREG_MODE, 
	VALID_NEON_QREG_MODE respectively. Add export arm_bf16_type_node,
	arm_bf16_ptr_type_node.
	* config/arm/arm.md: Add BFmode to movhf expand, mov pattern and
	define_split between ARM registers.
	* config/arm/arm_bf16.h: New file.
	* config/arm/arm_neon.h: Add arm_bf16.h and Bfloat vector types.
	* config/arm/iterators.md: (ANY64_BF, VDXMOV, VHFBF, HFBF, fporbf): New.
	(VQXMOV): Add V8BF.
	* config/arm/neon.md: Add BF vector types to movhf NEON move patterns.
	* config/arm/vfp.md: Add BFmode to movhf patterns.

2020-01-16  Mihail Ionescu  <mihail.ionescu@arm.com>
	    Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* config/arm/arm-cpus.in (mve, mve_float): New features.
	(dsp, mve, mve.fp): New options.
	* config/arm/arm.h (TARGET_HAVE_MVE, TARGET_HAVE_MVE_FLOAT): Define.
	* config/arm/t-rmprofile: Map v8.1-M multilibs to v8-M.
	* doc/invoke.texi: Document the armv8.1-m mve and dps options.

2020-01-16  Mihail-Calin Ionescu  <mihail.ionescu@arm.com>
	    Thomas Preud'homme  <thomas.preudhomme@arm.com>

	* config/arm/arm-cpus.in (ARMv8_1m_main): Redefine as an extension to
	Armv8-M Mainline.
	* config/arm/arm.c (arm_options_perform_arch_sanity_checks): Remove
	error for using -mcmse when targeting Armv8.1-M Mainline.

2020-01-16  Mihail-Calin Ionescu  <mihail.ionescu@arm.com>
	    Thomas Preud'homme  <thomas.preudhomme@arm.com>

	* config/arm/arm.md (nonsecure_call_internal): Do not force memory
	address in r4 when targeting Armv8.1-M Mainline.
	(nonsecure_call_value_internal): Likewise.
	* config/arm/thumb2.md (nonsecure_call_reg_thumb2): Make memory address
	a register match_operand again.  Emit BLXNS when targeting
	Armv8.1-M Mainline.
	(nonsecure_call_value_reg_thumb2): Likewise.

2020-01-16  Mihail-Calin Ionescu  <mihail.ionescu@arm.com>
	    Thomas Preud'homme  <thomas.preudhomme@arm.com>

	* config/arm/arm.c (arm_add_cfa_adjust_cfa_note): Declare early.
	(cmse_nonsecure_call_inline_register_clear): Define new lazy_fpclear
	variable as true when floating-point ABI is not hard.  Replace
	check against TARGET_HARD_FLOAT_ABI by checks against lazy_fpclear.
	Generate VLSTM and VLLDM instruction respectively before and
	after a function call to cmse_nonsecure_call function.
	* config/arm/unspecs.md (VUNSPEC_VLSTM): Define unspec.
	(VUNSPEC_VLLDM): Likewise.
	* config/arm/vfp.md (lazy_store_multiple_insn): New define_insn.
	(lazy_load_multiple_insn): Likewise.

2020-01-16  Mihail-Calin Ionescu  <mihail.ionescu@arm.com>
	    Thomas Preud'homme  <thomas.preudhomme@arm.com>

	* config/arm/arm.c (vfp_emit_fstmd): Declare early.
	(arm_emit_vfp_multi_reg_pop): Likewise.
	(cmse_nonsecure_call_inline_register_clear): Abstract number of VFP
	registers to clear in max_fp_regno.  Emit VPUSH and VPOP to save and
	restore callee-saved VFP registers.

2020-01-16  Mihail-Calin Ionescu  <mihail.ionescu@arm.com>
	    Thomas Preud'homme  <thomas.preudhomme@arm.com>

	* config/arm/arm.c (arm_emit_multi_reg_pop): Declare early.
	(cmse_nonsecure_call_clear_caller_saved): Rename into ...
	(cmse_nonsecure_call_inline_register_clear): This.  Save and clear
	callee-saved GPRs as well as clear ip register before doing a nonsecure
	call then restore callee-saved GPRs after it when targeting
	Armv8.1-M Mainline.
	(arm_reorg): Adapt to function rename.

2020-01-16  Mihail-Calin Ionescu  <mihail.ionescu@arm.com>
	    Thomas Preud'homme  <thomas.preudhomme@arm.com>

	* config/arm/arm-protos.h (clear_operation_p): Adapt prototype.
	* config/arm/arm.c (clear_operation_p): Extend to be able to check a
	clear_vfp_multiple pattern based on a new vfp parameter.
	(cmse_clear_registers): Generate VSCCLRM to clear VFP registers when
	targeting Armv8.1-M Mainline.
	(cmse_nonsecure_entry_clear_before_return): Clear VFP registers
	unconditionally when targeting Armv8.1-M Mainline architecture.  Check
	whether VFP registers are available before looking call_used_regs for a
	VFP register.
	* config/arm/predicates.md (clear_multiple_operation): Adapt to change
	of prototype of clear_operation_p.
	(clear_vfp_multiple_operation): New predicate.
	* config/arm/unspecs.md (VUNSPEC_VSCCLRM_VPR): New volatile unspec.
	* config/arm/vfp.md (clear_vfp_multiple): New define_insn.

2020-01-16  Mihail-Calin Ionescu  <mihail.ionescu@arm.com>
	    Thomas Preud'homme  <thomas.preudhomme@arm.com>

	* config/arm/arm-protos.h (clear_operation_p): Declare.
	* config/arm/arm.c (clear_operation_p): New function.
	(cmse_clear_registers): Generate clear_multiple instruction pattern if
	targeting Armv8.1-M Mainline or successor.
	(output_return_instruction): Only output APSR register clearing if
	Armv8.1-M Mainline instructions not available.
	(thumb_exit): Likewise.
	* config/arm/predicates.md (clear_multiple_operation): New predicate.
	* config/arm/thumb2.md (clear_apsr): New define_insn.
	(clear_multiple): Likewise.
	* config/arm/unspecs.md (VUNSPEC_CLRM_APSR): New volatile unspec.

2020-01-16  Mihail-Calin Ionescu  <mihail.ionescu@arm.com>
	    Thomas Preud'homme  <thomas.preudhomme@arm.com>

	* config/arm/arm.c (fp_sysreg_names): Declare and define.
	(use_return_insn): Also return false for Armv8.1-M Mainline.
	(output_return_instruction): Skip FPSCR clearing if Armv8.1-M
	Mainline instructions are available.
	(arm_compute_frame_layout): Allocate space in frame for FPCXTNS
	when targeting Armv8.1-M Mainline Security Extensions.
	(arm_expand_prologue): Save FPCXTNS if this is an Armv8.1-M
	Mainline entry function.
	(cmse_nonsecure_entry_clear_before_return): Clear IP and r4 if
	targeting Armv8.1-M Mainline or successor.
	(arm_expand_epilogue): Fix indentation of caller-saved register
	clearing.  Restore FPCXTNS if this is an Armv8.1-M Mainline
	entry function.
	* config/arm/arm.h (TARGET_HAVE_FP_CMSE): New macro.
	(FP_SYSREGS): Likewise.
	(enum vfp_sysregs_encoding): Define enum.
	(fp_sysreg_names): Declare.
	* config/arm/unspecs.md (VUNSPEC_VSTR_VLDR): New volatile unspec.
	* config/arm/vfp.md (push_fpsysreg_insn): New define_insn.
	(pop_fpsysreg_insn): Likewise.

2020-01-16  Mihail-Calin Ionescu  <mihail.ionescu@arm.com>
	    Thomas Preud'homme  <thomas.preudhomme@arm.com>

	* config/arm/arm-cpus.in (armv8_1m_main): New feature.
	(ARMv4, ARMv4t, ARMv5t, ARMv5te, ARMv5tej, ARMv6, ARMv6j, ARMv6k,
	ARMv6z, ARMv6kz, ARMv6zk, ARMv6t2, ARMv6m, ARMv7, ARMv7a, ARMv7ve,
	ARMv7r, ARMv7m, ARMv7em, ARMv8a, ARMv8_1a, ARMv8_2a, ARMv8_3a,
	ARMv8_4a, ARMv8_5a, ARMv8m_base, ARMv8m_main, ARMv8r): Reindent.
	(ARMv8_1m_main): New feature group.
	(armv8.1-m.main): New architecture.
	* config/arm/arm-tables.opt: Regenerate.
	* config/arm/arm.c (arm_arch8_1m_main): Define and default initialize.
	(arm_option_reconfigure_globals): Initialize arm_arch8_1m_main.
	(arm_options_perform_arch_sanity_checks): Error out when targeting
	Armv8.1-M Mainline Security Extensions.
	* config/arm/arm.h (arm_arch8_1m_main): Declare.

2020-01-16  Stam Markianos-Wright  <stam.markianos-wright@arm.com>

	* config/aarch64/aarch64-simd-builtins.def (aarch64_bfdot,
	aarch64_bfdot_lane, aarch64_bfdot_laneq): New.
	* config/aarch64/aarch64-simd.md (aarch64_bfdot, aarch64_bfdot_lane,
	aarch64_bfdot_laneq): New.
	* config/aarch64/arm_bf16.h (vbfdot_f32, vbfdotq_f32,
	vbfdot_lane_f32, vbfdotq_lane_f32, vbfdot_laneq_f32,
	vbfdotq_laneq_f32): New.
	* config/aarch64/iterators.md (UNSPEC_BFDOT, Vbfdottype,
	VBFMLA_W, VBF): New.
	(isquadop): Add V4BF, V8BF.

2020-01-16  Stam Markianos-Wright  <stam.markianos-wright@arm.com>

	* config/aarch64/aarch64-builtins.c: (enum aarch64_type_qualifiers):
	New qualifier_lane_quadtup_index, TYPES_TERNOP_SSUS,
	TYPES_QUADOPSSUS_LANE_QUADTUP, TYPES_QUADOPSSSU_LANE_QUADTUP.
	(aarch64_simd_expand_args): Add case SIMD_ARG_LANE_QUADTUP_INDEX.
	(aarch64_simd_expand_builtin): Add qualifier_lane_quadtup_index.
	* config/aarch64/aarch64-simd-builtins.def (usdot, usdot_lane,
	usdot_laneq, sudot_lane,sudot_laneq): New.
	* config/aarch64/aarch64-simd.md (aarch64_usdot): New.
	(aarch64_<sur>dot_lane): New.
	* config/aarch64/arm_neon.h (vusdot_s32): New.
	(vusdotq_s32): New.
	(vusdot_lane_s32): New.
	(vsudot_lane_s32): New.
	* config/aarch64/iterators.md (DOTPROD_I8MM): New iterator.
	(UNSPEC_USDOT, UNSPEC_SUDOT): New unspecs.

2020-01-16  Martin Liska  <mliska@suse.cz>

	* value-prof.c (dump_histogram_value): Fix
	obvious spacing issue.

2020-01-16  Andrew Pinski  <apinski@marvell.com>

	* tree-ssa-sccvn.c(vn_reference_lookup_3): Check lhs for
	!storage_order_barrier_p.

2020-01-16  Andrew Pinski  <apinski@marvell.com>

	* sched-int.h (_dep): Add unused bit-field field for the padding.
	* sched-deps.c (init_dep_1): Init unused field.

2020-01-16  Andrew Pinski  <apinski@marvell.com>

	* optabs.h (create_expand_operand): Initialize target field also.

2020-01-16  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	PR tree-optimization/92429
	* tree-ssa-loop-niter.h (simplify_replace_tree): Add parameter.
	* tree-ssa-loop-niter.c (simplify_replace_tree): Add parameter to
	control folding.
	* tree-vect-loop.c (update_epilogue_vinfo): Do not fold when replacing
	tree.

2020-01-16  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.c (aarch64_split_sve_subreg_move): Apply
	aarch64_sve_int_mode to each mode.

2020-01-15  David Malcolm  <dmalcolm@redhat.com>

	* doc/analyzer.texi (Overview): Add note about
	-fdump-ipa-analyzer.

2020-01-15  Wilco Dijkstra  <wdijkstr@arm.com>

	PR tree-optimization/93231
	* tree-ssa-forwprop.c (optimize_count_trailing_zeroes): Check
	input_type is unsigned.  Use tree_to_shwi for shift constant.
	Check CST_STRING element size is CHAR_TYPE_SIZE bits.
	(simplify_count_trailing_zeroes): Add test to handle known non-zero
	inputs more efficiently.

2020-01-15  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (*movsf_internal): Do not require
	SSE2 ISA for alternatives 14 and 15.

2020-01-15  Richard Biener  <rguenther@suse.de>

	PR middle-end/93273
	* tree-eh.c (sink_clobbers): If we already visited the destination
	block do not defer insertion.
	(pass_lower_eh_dispatch::execute): Maintain BB_VISITED for
	the purpose of defered insertion.

2020-01-15  Jakub Jelinek  <jakub@redhat.com>

	* BASE-VER: Bump to 10.0.1.

2020-01-15  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/93247
	* tree-vect-loop.c (update_epilogue_loop_vinfo): Check the access
	type of the stmt that we're going to vectorize.

2020-01-15  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-slp.c (vectorize_slp_instance_root_stmt): Use a
	VIEW_CONVERT_EXPR if the vectorized constructor has a diffeent
	type from the lhs.

2020-01-15  Martin Liska  <mliska@suse.cz>

	* ipa-profile.c (ipa_profile_read_edge_summary): Do not allow
	2 calls of streamer_read_hwi in a function call.

2020-01-15  Richard Biener  <rguenther@suse.de>

	* alias.c (record_alias_subset): Avoid redundant work when
	subset is already recorded.

2020-01-14  David Malcolm  <dmalcolm@redhat.com>

	* doc/invoke.texi (-fdiagnostics-show-cwe): Add note that some of
	the analyzer options provide CWE identifiers.

2020-01-14  David Malcolm  <dmalcolm@redhat.com>

	* tree-diagnostic-path.cc (path_summary::event_range::print):
	When testing for UNKNOWN_LOCATION, look through ad-hoc wrappers
	using get_pure_location.

2020-01-15  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/93262
	* tree-ssa-dse.c (maybe_trim_memstar_call): For *_chk builtins,
	perform head trimming only if the last argument is constant,
	either all ones, or larger or equal to head trim, in the latter
	case decrease the last argument by head_trim.

	PR tree-optimization/93249
	* tree-ssa-dse.c: Include builtins.h and gimple-fold.h.
	(maybe_trim_memstar_call): Move head_trim and tail_trim vars to
	function body scope, reindent.  For BUILTIN_IN_STRNCPY*, don't
	perform head trim unless we can prove there are no '\0' chars
	from the source among the first head_trim chars.

2020-01-14  David Malcolm  <dmalcolm@redhat.com>

	* Makefile.in (ANALYZER_OBJS): Add analyzer/function-set.o.

2020-01-15  Jakub Jelinek  <jakub@redhat.com>

	PR target/93009
	* config/i386/sse.md
	(*<sd_mask_codefor>fma_fmadd_<mode><sd_maskz_name>_bcst_1,
	*<sd_mask_codefor>fma_fmsub_<mode><sd_maskz_name>_bcst_1,
	*<sd_mask_codefor>fma_fnmadd_<mode><sd_maskz_name>_bcst_1,
	*<sd_mask_codefor>fma_fnmsub_<mode><sd_maskz_name>_bcst_1): Use
	just a single alternative instead of two, make operands 1 and 2
	commutative.

2020-01-14  Jan Hubicka  <hubicka@ucw.cz>

	PR lto/91576
	* ipa-devirt.c (odr_types_equivalent_p): Compare TREE_ADDRESSABLE and
	TYPE_MODE.

2020-01-14  David Malcolm  <dmalcolm@redhat.com>

	* Makefile.in (lang_opt_files): Add analyzer.opt.
	(ANALYZER_OBJS): New.
	(OBJS): Add digraph.o, graphviz.o, ordered-hash-map-tests.o,
	tristate.o and ANALYZER_OBJS.
	(TEXI_GCCINT_FILES): Add analyzer.texi.
	* common.opt (-fanalyzer): New driver option.
	* config.in: Regenerate.
	* configure: Regenerate.
	* configure.ac (--disable-analyzer, ENABLE_ANALYZER): New option.
	(gccdepdir): Also create depdir for "analyzer" subdir.
	* digraph.cc: New file.
	* digraph.h: New file.
	* doc/analyzer.texi: New file.
	* doc/gccint.texi ("Static Analyzer") New menu item.
	(analyzer.texi): Include it.
	* doc/invoke.texi ("Static Analyzer Options"): New list and new section.
	("Warning Options"): Add static analysis warnings to the list.
	(-Wno-analyzer-double-fclose): New option.
	(-Wno-analyzer-double-free): New option.
	(-Wno-analyzer-exposure-through-output-file): New option.
	(-Wno-analyzer-file-leak): New option.
	(-Wno-analyzer-free-of-non-heap): New option.
	(-Wno-analyzer-malloc-leak): New option.
	(-Wno-analyzer-possible-null-argument): New option.
	(-Wno-analyzer-possible-null-dereference): New option.
	(-Wno-analyzer-null-argument): New option.
	(-Wno-analyzer-null-dereference): New option.
	(-Wno-analyzer-stale-setjmp-buffer): New option.
	(-Wno-analyzer-tainted-array-index): New option.
	(-Wno-analyzer-use-after-free): New option.
	(-Wno-analyzer-use-of-pointer-in-stale-stack-frame): New option.
	(-Wno-analyzer-use-of-uninitialized-value): New option.
	(-Wanalyzer-too-complex): New option.
	(-fanalyzer-call-summaries): New warning.
	(-fanalyzer-checker=): New warning.
	(-fanalyzer-fine-grained): New warning.
	(-fno-analyzer-state-merge): New warning.
	(-fno-analyzer-state-purge): New warning.
	(-fanalyzer-transitivity): New warning.
	(-fanalyzer-verbose-edges): New warning.
	(-fanalyzer-verbose-state-changes): New warning.
	(-fanalyzer-verbosity=): New warning.
	(-fdump-analyzer): New warning.
	(-fdump-analyzer-callgraph): New warning.
	(-fdump-analyzer-exploded-graph): New warning.
	(-fdump-analyzer-exploded-nodes): New warning.
	(-fdump-analyzer-exploded-nodes-2): New warning.
	(-fdump-analyzer-exploded-nodes-3): New warning.
	(-fdump-analyzer-supergraph): New warning.
	* doc/sourcebuild.texi (dg-require-dot): New.
	(dg-check-dot): New.
	* gdbinit.in (break-on-saved-diagnostic): New command.
	* graphviz.cc: New file.
	* graphviz.h: New file.
	* ordered-hash-map-tests.cc: New file.
	* ordered-hash-map.h: New file.
	* passes.def (pass_analyzer): Add before
	pass_ipa_whole_program_visibility.
	* selftest-run-tests.c (selftest::run_tests): Call
	selftest::ordered_hash_map_tests_cc_tests.
	* selftest.h (selftest::ordered_hash_map_tests_cc_tests): New
	decl.
	* shortest-paths.h: New file.
	* timevar.def (TV_ANALYZER): New timevar.
	(TV_ANALYZER_SUPERGRAPH): Likewise.
	(TV_ANALYZER_STATE_PURGE): Likewise.
	(TV_ANALYZER_PLAN): Likewise.
	(TV_ANALYZER_SCC): Likewise.
	(TV_ANALYZER_WORKLIST): Likewise.
	(TV_ANALYZER_DUMP): Likewise.
	(TV_ANALYZER_DIAGNOSTICS): Likewise.
	(TV_ANALYZER_SHORTEST_PATHS): Likewise.
	* tree-pass.h (make_pass_analyzer): New decl.
	* tristate.cc: New file.
	* tristate.h: New file.

2020-01-14  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/93254
	* config/i386/i386.md (*movsf_internal): Require SSE2 ISA for
	alternatives 9 and 10.

2020-01-14  David Malcolm  <dmalcolm@redhat.com>

	* attribs.c (excl_hash_traits::empty_zero_p): New static constant.
	* gcov.c (function_start_pair_hash::empty_zero_p): Likewise.
	* graphite.c (struct sese_scev_hash::empty_zero_p): Likewise.
	* hash-map-tests.c (selftest::test_nonzero_empty_key): New selftest.
	(selftest::hash_map_tests_c_tests): Call it.
	* hash-map-traits.h (simple_hashmap_traits::empty_zero_p):
	New static constant, using the value of = H::empty_zero_p.
	(unbounded_hashmap_traits::empty_zero_p): Likewise, using the value
	from default_hash_traits <Value>.
	* hash-map.h (hash_map::empty_zero_p): Likewise, using the value
	from Traits.
	* hash-set-tests.c (value_hash_traits::empty_zero_p): Likewise.
	* hash-table.h (hash_table::alloc_entries): Guard the loop of
	calls to mark_empty with !Descriptor::empty_zero_p.
	(hash_table::empty_slow): Conditionalize the memset call with a
	check that Descriptor::empty_zero_p; otherwise, loop through the
	entries calling mark_empty on them.
	* hash-traits.h (int_hash::empty_zero_p): New static constant.
	(pointer_hash::empty_zero_p): Likewise.
	(pair_hash::empty_zero_p): Likewise.
	* ipa-devirt.c (default_hash_traits <type_pair>::empty_zero_p):
	Likewise.
	* ipa-prop.c (ipa_bit_ggc_hash_traits::empty_zero_p): Likewise.
	(ipa_vr_ggc_hash_traits::empty_zero_p): Likewise.
	* profile.c (location_triplet_hash::empty_zero_p): Likewise.
	* sanopt.c (sanopt_tree_triplet_hash::empty_zero_p): Likewise.
	(sanopt_tree_couple_hash::empty_zero_p): Likewise.
	* tree-hasher.h (int_tree_hasher::empty_zero_p): Likewise.
	* tree-ssa-sccvn.c (vn_ssa_aux_hasher::empty_zero_p): Likewise.
	* tree-vect-slp.c (bst_traits::empty_zero_p): Likewise.
	* tree-vectorizer.h
	(default_hash_traits<scalar_cond_masked_key>::empty_zero_p):
	Likewise.

2020-01-14  Kewen Lin  <linkw@gcc.gnu.org>

	* cfgloopanal.c (average_num_loop_insns): Free bbs when early return,
	fix typo on return value.

2020-01-14  Xiong Hu Luo  <luoxhu@linux.ibm.com>

	PR ipa/69678
	* cgraph.c (symbol_table::create_edge): Init speculative_id and
	target_prob.
	(cgraph_edge::make_speculative): Add param for setting speculative_id
	and target_prob.
	(cgraph_edge::speculative_call_info): Update comments and find reference
	by speculative_id for multiple indirect targets.
	(cgraph_edge::resolve_speculation): Decrease the speculations
	for indirect edge, drop it's speculative if not direct target
	left. Update comments.
	(cgraph_edge::redirect_call_stmt_to_callee): Likewise.
	(cgraph_node::dump): Print num_speculative_call_targets.
	(cgraph_node::verify_node): Don't report error if speculative
	edge not include statement.
	(cgraph_edge::num_speculative_call_targets_p): New function.
	* cgraph.h (int common_target_id): Remove.
	(int common_target_probability): Remove.
	(num_speculative_call_targets): New variable.
	(make_speculative): Add param for setting speculative_id.
	(cgraph_edge::num_speculative_call_targets_p): New declare.
	(target_prob): New variable.
	(speculative_id): New variable.
	* ipa-fnsummary.c (analyze_function_body): Create and duplicate
	  call summaries for multiple speculative call targets.
	* cgraphclones.c (cgraph_node::create_clone): Clone speculative_id.
	* ipa-profile.c (struct speculative_call_target): New struct.
	(class speculative_call_summary): New class.
	(class speculative_call_summaries): New class.
	(call_sums): New variable.
	(ipa_profile_generate_summary): Generate indirect multiple targets summaries.
	(ipa_profile_write_edge_summary): New function.
	(ipa_profile_write_summary): Stream out indirect multiple targets summaries.
	(ipa_profile_dump_all_summaries): New function.
	(ipa_profile_read_edge_summary): New function.
	(ipa_profile_read_summary_section): New function.
	(ipa_profile_read_summary): Stream in indirect multiple targets summaries.
	(ipa_profile): Generate num_speculative_call_targets from
	profile summaries.
	* ipa-ref.h (speculative_id): New variable.
	* ipa-utils.c (ipa_merge_profiles): Update with target_prob.
	* lto-cgraph.c (lto_output_edge): Remove indirect common_target_id and
	common_target_probability.   Stream out speculative_id and
	num_speculative_call_targets.
	(input_edge): Likewise.
	* predict.c (dump_prediction): Remove edges count assert to be
	precise.
	* symtab.c (symtab_node::create_reference): Init speculative_id.
	(symtab_node::clone_references): Clone speculative_id.
	(symtab_node::clone_referring): Clone speculative_id.
	(symtab_node::clone_reference): Clone speculative_id.
	(symtab_node::clear_stmts_in_references): Clear speculative_id.
	* tree-inline.c (copy_bb): Duplicate all the speculative edges
	if indirect call contains multiple speculative targets.
	* value-prof.h  (check_ic_target): Remove.
	* value-prof.c  (gimple_value_profile_transformations):
	Use void function gimple_ic_transform.
	* value-prof.c  (gimple_ic_transform): Handle topn case.
	Fix comment typos.  Change it to a void function.

2020-01-13  Andrew Pinski  <apinski@marvell.com>

	* config/aarch64/aarch64-cores.def (octeontx2): New define.
	(octeontx2t98): New define.
	(octeontx2t96): New define.
	(octeontx2t93): New define.
	(octeontx2f95): New define.
	(octeontx2f95n): New define.
	(octeontx2f95mm): New define.
	* config/aarch64/aarch64-tune.md: Regenerate.
	* doc/invoke.texi (-mcpu=): Document the new cpu types.

2020-01-13  Jason Merrill  <jason@redhat.com>

	PR c++/33799 - destroy return value if local cleanup throws.
	* gimplify.c (gimplify_return_expr): Handle COMPOUND_EXPR.

2020-01-13  Martin Liska  <mliska@suse.cz>

	* ipa-cp.c (get_max_overall_size): Use newly
	renamed param param_ipa_cp_unit_growth.
	* params.opt: Remove legacy param name.

2020-01-13  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/93213
	* tree-ssa-strlen.c (handle_store): Only allow single-byte nul-over-nul
	stores to be eliminated.

2020-01-13  Martin Liska  <mliska@suse.cz>

	* opts.c (print_help): Do not print CL_PARAM
	and CL_WARNING for CL_OPTIMIZATION.

2020-01-13  Jonathan Wakely  <jwakely@redhat.com>

	PR driver/92757
	* doc/invoke.texi (Warning Options): Add caveat about some warnings
	depending on optimization settings.

2020-01-13  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/90838
	* tree-ssa-forwprop.c (simplify_count_trailing_zeroes): Use
	SCALAR_INT_TYPE_MODE directly in CTZ_DEFINED_VALUE_AT_ZERO macro
	argument rather than to initialize temporary for targets that
	don't use the mode argument at all.  Initialize ctzval to avoid
	warning at -O0.

2020-01-10  Thomas Schwinge  <thomas@codesourcery.com>

	* tree.h (OMP_CLAUSE_USE_DEVICE_PTR_IF_PRESENT): New definition.
	* tree-core.h: Document it.
	* gimplify.c (gimplify_omp_workshare): Set it.
	* omp-low.c (lower_omp_target): Use it.
	* tree-pretty-print.c (dump_omp_clause): Print it.

	* omp-low.c (lower_omp_target) <OMP_CLAUSE_USE_DEVICE_PTR etc.>:
	Assert that for OpenACC we always have 'GOMP_MAP_USE_DEVICE_PTR'.

2020-01-10  David Malcolm  <dmalcolm@redhat.com>

	* Makefile.in (OBJS): Add tree-diagnostic-path.o.
	* common.opt (fdiagnostics-path-format=): New option.
	(diagnostic_path_format): New enum.
	(fdiagnostics-show-path-depths): New option.
	* coretypes.h (diagnostic_event_id_t): New forward decl.
	* diagnostic-color.c (color_dict): Add "path".
	* diagnostic-event-id.h: New file.
	* diagnostic-format-json.cc (json_from_expanded_location): Make
	non-static.
	(json_end_diagnostic): Call context->make_json_for_path if it
	exists and the diagnostic has a path.
	(diagnostic_output_format_init): Clear context->print_path.
	* diagnostic-path.h: New file.
	* diagnostic-show-locus.c (colorizer::set_range): Special-case
	when printing a run of events in a diagnostic_path so that they
	all get the same color.
	(layout::m_diagnostic_path_p): New field.
	(layout::layout): Initialize it.
	(layout::print_any_labels): Don't colorize the label text for an
	event in a diagnostic_path.
	(gcc_rich_location::add_location_if_nearby): Add
	"restrict_to_current_line_spans" and "label" params.  Pass the
	former to layout.maybe_add_location_range; pass the latter
	when calling add_range.
	* diagnostic.c: Include "diagnostic-path.h".
	(diagnostic_initialize): Initialize context->path_format and
	context->show_path_depths.
	(diagnostic_show_any_path): New function.
	(diagnostic_path::interprocedural_p): New function.
	(diagnostic_report_diagnostic): Call diagnostic_show_any_path.
	(simple_diagnostic_path::num_events): New function.
	(simple_diagnostic_path::get_event): New function.
	(simple_diagnostic_path::add_event): New function.
	(simple_diagnostic_event::simple_diagnostic_event): New ctor.
	(simple_diagnostic_event::~simple_diagnostic_event): New dtor.
	(debug): New overload taking a diagnostic_path *.
	* diagnostic.def (DK_DIAGNOSTIC_PATH): New.
	* diagnostic.h (enum diagnostic_path_format): New enum.
	(json::value): New forward decl.
	(diagnostic_context::path_format): New field.
	(diagnostic_context::show_path_depths): New field.
	(diagnostic_context::print_path): New callback field.
	(diagnostic_context::make_json_for_path): New callback field.
	(diagnostic_show_any_path): New decl.
	(json_from_expanded_location): New decl.
	* doc/invoke.texi (-fdiagnostics-path-format=): New option.
	(-fdiagnostics-show-path-depths): New option.
	(-fdiagnostics-color): Add "path" to description of default
	GCC_COLORS; describe it.
	(-fdiagnostics-format=json): Document how diagnostic paths are
	represented in the JSON output format.
	* gcc-rich-location.h (gcc_rich_location::add_location_if_nearby):
	Add optional params "restrict_to_current_line_spans" and "label".
	* opts.c (common_handle_option): Handle
	OPT_fdiagnostics_path_format_ and
	OPT_fdiagnostics_show_path_depths.
	* pretty-print.c: Include "diagnostic-event-id.h".
	(pp_format): Implement "%@" format code for printing
	diagnostic_event_id_t *.
	(selftest::test_pp_format): Add tests for "%@".
	* selftest-run-tests.c (selftest::run_tests): Call
	selftest::tree_diagnostic_path_cc_tests.
	* selftest.h (selftest::tree_diagnostic_path_cc_tests): New decl.
	* toplev.c (general_init): Initialize global_dc->path_format and
	global_dc->show_path_depths.
	* tree-diagnostic-path.cc: New file.
	* tree-diagnostic.c (maybe_unwind_expanded_macro_loc): Make
	non-static.  Drop "diagnostic" param in favor of storing the
	original value of "where" and re-using it.
	(virt_loc_aware_diagnostic_finalizer): Update for dropped param of
	maybe_unwind_expanded_macro_loc.
	(tree_diagnostics_defaults): Initialize context->print_path and
	context->make_json_for_path.
	* tree-diagnostic.h (default_tree_diagnostic_path_printer): New
	decl.
	(default_tree_make_json_for_path): New decl.
	(maybe_unwind_expanded_macro_loc): New decl.

2020-01-10  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/93210
	* fold-const.h (native_encode_initializer,
	can_native_interpret_type_p): Declare.
	* fold-const.c (native_encode_string): Fix up handling with off != -1,
	simplify.
	(native_encode_initializer): New function, moved from dwarf2out.c.
	Adjust to native_encode_expr compatible arguments, including dry-run
	and partial extraction modes.  Don't handle STRING_CST.
	(can_native_interpret_type_p): No longer static.
	* gimple-fold.c (fold_ctor_reference): For native_encode_expr, verify
	offset / BITS_PER_UNIT fits into int and don't call it if
	can_native_interpret_type_p fails.  If suboff is NULL and for
	CONSTRUCTOR fold_{,non}array_ctor_reference returns NULL, retry with
	native_encode_initializer.
	(fold_const_aggregate_ref_1): Formatting fix.
	* dwarf2out.c (native_encode_initializer): Moved to fold-const.c.
	(tree_add_const_value_attribute): Adjust caller.

	PR tree-optimization/90838
	* tree-ssa-forwprop.c (simplify_count_trailing_zeroes): Use
	SCALAR_INT_TYPE_MODE instead of TYPE_MODE as operand of
	CTZ_DEFINED_VALUE_AT_ZERO.

2020-01-10  Vladimir Makarov  <vmakarov@redhat.com>

	PR inline-asm/93027
	* lra-constraints.c (match_reload): Permit input operands have the
	same mode as output while other input operands have a different
	mode.

2020-01-10  Wilco Dijkstra  <wdijkstr@arm.com>

	PR tree-optimization/90838
	* tree-ssa-forwprop.c (check_ctz_array): Add new function.
	(check_ctz_string): Likewise.
	(optimize_count_trailing_zeroes): Likewise.
	(simplify_count_trailing_zeroes): Likewise.
	(pass_forwprop::execute): Try ctz simplification.
	* match.pd: Add matching for ctz idioms.

2020-01-10  Stam Markianos-Wright  <stam.markianos-wright@arm.com>

	* config/aarch64/aarch64.c (aarch64_invalid_conversion): New function
	for target hook.
	(aarch64_invalid_unary_op): New function for target hook.
	(aarch64_invalid_binary_op): New function for target hook.

2020-01-10  Stam Markianos-Wright  <stam.markianos-wright@arm.com>

	* config.gcc: Add arm_bf16.h.
	* config/aarch64/aarch64-builtins.c
	(aarch64_simd_builtin_std_type): Add BFmode.
	(aarch64_init_simd_builtin_types): Define element types for vector
	types.
	(aarch64_init_bf16_types): New function.
	(aarch64_general_init_builtins): Add arm_init_bf16_types function call.
	* config/aarch64/aarch64-modes.def: Add BFmode and V4BF, V8BF vector
	modes.
	* config/aarch64/aarch64-simd-builtin-types.def: Add BF SIMD types.
	* config/aarch64/aarch64-simd.md: Add BF vector types to NEON move
	patterns.
	* config/aarch64/aarch64.h (AARCH64_VALID_SIMD_DREG_MODE): Add V4BF.
	(AARCH64_VALID_SIMD_QREG_MODE): Add V8BF.
	* config/aarch64/aarch64.c
	(aarch64_classify_vector_mode): Add support for BF types.
	(aarch64_gimplify_va_arg_expr): Add support for BF types.
	(aarch64_vq_mode): Add support for BF types.
	(aarch64_simd_container_mode): Add support for BF types.
	(aarch64_mangle_type): Add support for BF scalar type.
	* config/aarch64/aarch64.md: Add BFmode to movhf pattern.
	* config/aarch64/arm_bf16.h: New file.
	* config/aarch64/arm_neon.h: Add arm_bf16.h and Bfloat vector types.
	* config/aarch64/iterators.md: Add BF types to mode attributes.
	(HFBF, GPF_TF_F16_MOV, VDMOV, VQMOV, VQMOV_NO2Em VALL_F16MOV): New.

2020-01-10  Jason Merrill  <jason@redhat.com>

	PR c++/93173 - incorrect tree sharing.
	* gimplify.c (copy_if_shared): No longer static.
	* gimplify.h: Declare it.

2020-01-10  Richard Sandiford  <richard.sandiford@arm.com>

	* doc/invoke.texi (-msve-vector-bits=): Document that
	-msve-vector-bits=128 now generates VL-specific code for
	little-endian targets.
	* config/aarch64/aarch64-sve-builtins.cc (register_builtin_types): Use
	build_vector_type_for_mode to construct the data vector types.
	* config/aarch64/aarch64.c (aarch64_convert_sve_vector_bits): Generate
	VL-specific code for -msve-vector-bits=128 on little-endian targets.
	(aarch64_simd_container_mode): Always prefer Advanced SIMD modes
	for 128-bit vectors.

2020-01-10  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.c (aarch64_evpc_sel): Fix gen_vcond_mask
	invocation.

2020-01-10  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-builtins.c
	(aarch64_builtin_vectorized_function): Check for specific vector modes,
	rather than checking the number of elements and the element mode.

2020-01-10  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-loop.c (vect_create_epilog_for_reduction): Use
	get_related_vectype_for_scalar_type rather than build_vector_type
	to create the index type for a conditional reduction.

2020-01-10  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-loop.c (update_epilogue_loop_vinfo): Update DR_REF
	for any type of gather or scatter, including strided accesses.

2020-01-10  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* tree-vectorizer.h (get_dr_vinfo_offset): Add missing function
	 comment.

2020-01-10  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* tree-vect-data-refs.c (vect_create_addr_base_for_vector_ref): Use
	get_dr_vinfo_offset
	* tree-vect-loop.c (update_epilogue_loop_vinfo):  Remove orig_drs_init
	parameter and its use to reset DR_OFFSET's.
	(vect_transform_loop): Remove orig_drs_init argument.
	* tree-vect-loop-manip.c (vect_update_init_of_dr): Update the offset
	member of dr_vec_info rather than the offset of the associated
	data_reference's innermost_loop_behavior.
	(vect_update_init_of_dr): Pass dr_vec_info instead of data_reference.
	(vect_do_peeling): Remove orig_drs_init parameter and its construction.
	* tree-vect-stmts.c (check_scan_store): Replace use of DR_OFFSET with
	get_dr_vinfo_offset.
	(vectorizable_store): Likewise.
	(vectorizable_load): Likewise.

2020-01-10  Richard Biener  <rguenther@suse.de>

	* gimple-ssa-store-merging
	(pass_store_merging::terminate_all_aliasing_chains): Cache alias info.

2020-01-10  Martin Liska  <mliska@suse.cz>

	PR ipa/93217
	* ipa-inline-analysis.c (offline_size): Make proper parenthesis
	encapsulation that was there before r280040.

2020-01-10  Richard Biener  <rguenther@suse.de>

	PR middle-end/93199
	* tree-eh.c (sink_clobbers): Move clobbers to out-of-IL
	sequences to avoid walking them again for secondary opportunities.
	(pass_lower_eh_dispatch::execute): Instead actually insert
	them here.

2020-01-10  Richard Biener  <rguenther@suse.de>

	PR middle-end/93199
	* tree-eh.c (redirect_eh_edge_1): Avoid some work if possible.
	(cleanup_all_empty_eh): Walk landing pads in reverse order to
	avoid quadraticness.

2020-01-10  Martin Jambor  <mjambor@suse.cz>

	* params.opt (param_ipa_sra_max_replacements): Mark as Optimization.
	* ipa-sra.c (pull_accesses_from_callee): New parameter caller, use it
	to get param_ipa_sra_max_replacements.
	(param_splitting_across_edge): Pass the caller to
	pull_accesses_from_callee.

2020-01-10  Martin Jambor  <mjambor@suse.cz>

	* params.opt (param_ipcp_unit_growth): Mark as Optimization.
	* ipa-cp.c (max_new_size): Removed.
	(orig_overall_size): New variable.
	(get_max_overall_size): New function.
	(estimate_local_effects): Use it.  Adjust dump.
	(decide_about_value): Likewise.
	(ipcp_propagate_stage): Do not calculate max_new_size, just store
	orig_overall_size.  Adjust dump.
	(ipa_cp_c_finalize): Clear orig_overall_size instead of max_new_size.

2020-01-10  Martin Jambor  <mjambor@suse.cz>

	* params.opt (param_ipa_max_agg_items): Mark as Optimization
	* ipa-cp.c (merge_agg_lats_step): New parameter max_agg_items, use
	instead of param_ipa_max_agg_items.
	(merge_aggregate_lattices): Extract param_ipa_max_agg_items from
	optimization info for the callee.

2020-01-09  Kwok Cheung Yeung  <kcy@codesourcery.com>

	* lto-streamer-in.c (input_function): Remove streamed-in inline debug
	markers	if debug_inline_points is false.

2020-01-09  Richard Sandiford  <richard.sandiford@arm.com>

	* config.gcc (aarch64*-*-*): Add aarch64-sve-builtins-sve2.o to
	extra_objs.
	* config/aarch64/t-aarch64 (aarch64-sve-builtins.o): Depend on
	aarch64-sve-builtins-base.def, aarch64-sve-builtins-sve2.def and
	aarch64-sve-builtins-sve2.h.
	(aarch64-sve-builtins-sve2.o): New rule.
	* config/aarch64/aarch64.h (AARCH64_ISA_SVE2_AES): New macro.
	(AARCH64_ISA_SVE2_BITPERM, AARCH64_ISA_SVE2_SHA3): Likewise.
	(AARCH64_ISA_SVE2_SM4, TARGET_SVE2_AES, TARGET_SVE2_BITPERM): Likewise.
	(TARGET_SVE2_SHA, TARGET_SVE2_SM4): Likewise.
	* config/aarch64/aarch64-c.c (aarch64_update_cpp_builtins): Handle
	TARGET_SVE2_AES, TARGET_SVE2_BITPERM, TARGET_SVE2_SHA3 and
	TARGET_SVE2_SM4.
	* config/aarch64/aarch64-sve.md: Update comments with SVE2
	instructions that are handled here.
	(@cond_asrd<mode>): Generalize to...
	(@cond_<SVE_INT_SHIFT_IMM:sve_int_op><mode>): ...this.
	(*cond_asrd<mode>_2): Generalize to...
	(*cond_<SVE_INT_SHIFT_IMM:sve_int_op><mode>_2): ...this.
	(*cond_asrd<mode>_z): Generalize to...
	(*cond_<SVE_INT_SHIFT_IMM:sve_int_op><mode>_z): ...this.
	* config/aarch64/aarch64.md (UNSPEC_LDNT1_GATHER): New unspec.
	(UNSPEC_STNT1_SCATTER, UNSPEC_WHILEGE, UNSPEC_WHILEGT): Likewise.
	(UNSPEC_WHILEHI, UNSPEC_WHILEHS): Likewise.
	* config/aarch64/aarch64-sve2.md (@aarch64_gather_ldnt<mode>): New
	pattern.
	(@aarch64_gather_ldnt_<ANY_EXTEND:optab><SVE_FULL_SDI:mode><SVE_PARTIAL_I:mode>)
	(@aarch64_scatter_stnt<mode>): Likewise.
	(@aarch64_scatter_stnt_<SVE_FULL_SDI:mode><SVE_PARTIAL_I:mode>)
	(@aarch64_mul_lane_<mode>): Likewise.
	(@aarch64_sve_suqadd<mode>_const): Likewise.
	(*<sur>h<addsub><mode>): Generalize to...
	(@aarch64_pred_<SVE2_COND_INT_BINARY_REV:sve_int_op><mode>): ...this
	new pattern.
	(@cond_<SVE2_COND_INT_BINARY:sve_int_op><mode>): New expander.
	(*cond_<SVE2_COND_INT_BINARY:sve_int_op><mode>_2): New pattern.
	(*cond_<SVE2_COND_INT_BINARY:sve_int_op><mode>_3): Likewise.
	(*cond_<SVE2_COND_INT_BINARY:sve_int_op><mode>_any): Likewise.
	(*cond_<SVE2_COND_INT_BINARY_NOREV:sve_int_op><mode>_z): Likewise.
	(@aarch64_sve_<SVE2_INT_BINARY:sve_int_op><mode>):: Likewise.
	(@aarch64_sve_<SVE2_INT_BINARY:sve_int_op>_lane_<mode>): Likewise.
	(@aarch64_pred_<SVE2_COND_INT_SHIFT:sve_int_op><mode>): Likewise.
	(@cond_<SVE2_COND_INT_SHIFT:sve_int_op><mode>): New expander.
	(*cond_<SVE2_COND_INT_SHIFT:sve_int_op><mode>_2): New pattern.
	(*cond_<SVE2_COND_INT_SHIFT:sve_int_op><mode>_3): Likewise.
	(*cond_<SVE2_COND_INT_SHIFT:sve_int_op><mode>_any): Likewise.
	(@aarch64_sve_<SVE2_INT_TERNARY:sve_int_op><mode>): Likewise.
	(@aarch64_sve_<SVE2_INT_TERNARY_LANE:sve_int_op>_lane_<mode>)
	(@aarch64_sve_add_mul_lane_<mode>): Likewise.
	(@aarch64_sve_sub_mul_lane_<mode>): Likewise.
	(@aarch64_sve2_xar<mode>): Likewise.
	(@aarch64_sve2_bcax<mode>): Likewise.
	(*aarch64_sve2_eor3<mode>): Rename to...
	(@aarch64_sve2_eor3<mode>): ...this.
	(@aarch64_sve2_bsl<mode>): New expander.
	(@aarch64_sve2_nbsl<mode>): Likewise.
	(@aarch64_sve2_bsl1n<mode>): Likewise.
	(@aarch64_sve2_bsl2n<mode>): Likewise.
	(@aarch64_sve_add_<SHIFTRT:sve_int_op><mode>): Likewise.
	(*aarch64_sve2_sra<mode>): Add MOVPRFX support.
	(@aarch64_sve_add_<VRSHR_N:sve_int_op><mode>): New pattern.
	(@aarch64_sve_<SVE2_INT_SHIFT_INSERT:sve_int_op><mode>): Likewise.
	(@aarch64_sve2_<USMAX:su>aba<mode>): New expander.
	(*aarch64_sve2_<USMAX:su>aba<mode>): New pattern.
	(@aarch64_sve_<SVE2_INT_BINARY_WIDE:sve_int_op><mode>): Likewise.
	(<su>mull<bt><Vwide>): Generalize to...
	(@aarch64_sve_<SVE2_INT_BINARY_LONG:sve_int_op><mode>): ...this new
	pattern.
	(@aarch64_sve_<SVE2_INT_BINARY_LONG_lANE:sve_int_op>_lane_<mode>)
	(@aarch64_sve_<SVE2_INT_SHIFT_IMM_LONG:sve_int_op><mode>)
	(@aarch64_sve_add_<SVE2_INT_ADD_BINARY_LONG:sve_int_op><mode>)
	(@aarch64_sve_add_<SVE2_INT_ADD_BINARY_LONG_LANE:sve_int_op>_lane_<mode>)
	(@aarch64_sve_qadd_<SVE2_INT_QADD_BINARY_LONG:sve_int_op><mode>)
	(@aarch64_sve_qadd_<SVE2_INT_QADD_BINARY_LONG_LANE:sve_int_op>_lane_<mode>)
	(@aarch64_sve_sub_<SVE2_INT_SUB_BINARY_LONG:sve_int_op><mode>)
	(@aarch64_sve_sub_<SVE2_INT_SUB_BINARY_LONG_LANE:sve_int_op>_lane_<mode>)
	(@aarch64_sve_qsub_<SVE2_INT_QSUB_BINARY_LONG:sve_int_op><mode>)
	(@aarch64_sve_qsub_<SVE2_INT_QSUB_BINARY_LONG_LANE:sve_int_op>_lane_<mode>)
	(@aarch64_sve_<SVE2_FP_TERNARY_LONG:sve_fp_op><mode>): New patterns.
	(@aarch64_<SVE2_FP_TERNARY_LONG_LANE:sve_fp_op>_lane_<mode>)
	(@aarch64_sve_<SVE2_INT_UNARY_NARROWB:sve_int_op><mode>): Likewise.
	(@aarch64_sve_<SVE2_INT_UNARY_NARROWT:sve_int_op><mode>): Likewise.
	(@aarch64_sve_<SVE2_INT_BINARY_NARROWB:sve_int_op><mode>): Likewise.
	(@aarch64_sve_<SVE2_INT_BINARY_NARROWT:sve_int_op><mode>): Likewise.
	(<SHRNB:r>shrnb<mode>): Generalize to...
	(@aarch64_sve_<SVE2_INT_SHIFT_IMM_NARROWB:sve_int_op><mode>): ...this
	new pattern.
	(<SHRNT:r>shrnt<mode>): Generalize to...
	(@aarch64_sve_<SVE2_INT_SHIFT_IMM_NARROWT:sve_int_op><mode>): ...this
	new pattern.
	(@aarch64_pred_<SVE2_INT_BINARY_PAIR:sve_int_op><mode>): New pattern.
	(@aarch64_pred_<SVE2_FP_BINARY_PAIR:sve_fp_op><mode>): Likewise.
	(@cond_<SVE2_INT_BINARY_PAIR_LONG:sve_int_op><mode>): New expander.
	(*cond_<SVE2_INT_BINARY_PAIR_LONG:sve_int_op><mode>_2): New pattern.
	(*cond_<SVE2_INT_BINARY_PAIR_LONG:sve_int_op><mode>_z): Likewise.
	(@aarch64_sve_<SVE2_INT_CADD:optab><mode>): Likewise.
	(@aarch64_sve_<SVE2_INT_CMLA:optab><mode>): Likewise.
	(@aarch64_<SVE2_INT_CMLA:optab>_lane_<mode>): Likewise.
	(@aarch64_sve_<SVE2_INT_CDOT:optab><mode>): Likewise.
	(@aarch64_<SVE2_INT_CDOT:optab>_lane_<mode>): Likewise.
	(@aarch64_pred_<SVE2_COND_FP_UNARY_LONG:sve_fp_op><mode>): Likewise.
	(@cond_<SVE2_COND_FP_UNARY_LONG:sve_fp_op><mode>): New expander.
	(*cond_<SVE2_COND_FP_UNARY_LONG:sve_fp_op><mode>): New pattern.
	(@aarch64_sve2_cvtnt<mode>): Likewise.
	(@aarch64_pred_<SVE2_COND_FP_UNARY_NARROWB:sve_fp_op><mode>): Likewise.
	(@cond_<SVE2_COND_FP_UNARY_NARROWB:sve_fp_op><mode>): New expander.
	(*cond_<SVE2_COND_FP_UNARY_NARROWB:sve_fp_op><mode>_any): New pattern.
	(@aarch64_sve2_cvtxnt<mode>): Likewise.
	(@aarch64_pred_<SVE2_U32_UNARY:sve_int_op><mode>): Likewise.
	(@cond_<SVE2_U32_UNARY:sve_int_op><mode>): New expander.
	(*cond_<SVE2_U32_UNARY:sve_int_op><mode>): New pattern.
	(@aarch64_pred_<SVE2_COND_INT_UNARY_FP:sve_fp_op><mode>): Likewise.
	(@cond_<SVE2_COND_INT_UNARY_FP:sve_fp_op><mode>): New expander.
	(*cond_<SVE2_COND_INT_UNARY_FP:sve_fp_op><mode>): New pattern.
	(@aarch64_sve2_pmul<mode>): Likewise.
	(@aarch64_sve_<SVE2_PMULL:optab><mode>): Likewise.
	(@aarch64_sve_<SVE2_PMULL_PAIR:optab><mode>): Likewise.
	(@aarch64_sve2_tbl2<mode>): Likewise.
	(@aarch64_sve2_tbx<mode>): Likewise.
	(@aarch64_sve_<SVE2_INT_BITPERM:sve_int_op><mode>): Likewise.
	(@aarch64_sve2_histcnt<mode>): Likewise.
	(@aarch64_sve2_histseg<mode>): Likewise.
	(@aarch64_pred_<SVE2_MATCH:sve_int_op><mode>): Likewise.
	(*aarch64_pred_<SVE2_MATCH:sve_int_op><mode>_cc): Likewise.
	(*aarch64_pred_<SVE2_MATCH:sve_int_op><mode>_ptest): Likewise.
	(aarch64_sve2_aes<CRYPTO_AES:aes_op>): Likewise.
	(aarch64_sve2_aes<CRYPTO_AESMC:aesmc_op>): Likewise.
	(*aarch64_sve2_aese_fused, *aarch64_sve2_aesd_fused): Likewise.
	(aarch64_sve2_rax1, aarch64_sve2_sm4e, aarch64_sve2_sm4ekey): Likewise.
	(<su>mulh<r>s<mode>3): Update after above pattern name changes.
	* config/aarch64/iterators.md (VNx16QI_ONLY, VNx4SF_ONLY)
	(SVE_STRUCT2, SVE_FULL_BHI, SVE_FULL_HSI, SVE_FULL_HDI)
	(SVE2_PMULL_PAIR_I): New mode iterators.
	(UNSPEC_ADCLB, UNSPEC_ADCLT, UNSPEC_ADDHNB, UNSPEC_ADDHNT, UNSPEC_BDEP)
	(UNSPEC_BEXT, UNSPEC_BGRP, UNSPEC_CADD90, UNSPEC_CADD270, UNSPEC_CDOT)
	(UNSPEC_CDOT90, UNSPEC_CDOT180, UNSPEC_CDOT270, UNSPEC_CMLA)
	(UNSPEC_CMLA90, UNSPEC_CMLA180, UNSPEC_CMLA270, UNSPEC_COND_FCVTLT)
	(UNSPEC_COND_FCVTNT, UNSPEC_COND_FCVTX, UNSPEC_COND_FCVTXNT)
	(UNSPEC_COND_FLOGB, UNSPEC_EORBT, UNSPEC_EORTB, UNSPEC_FADDP)
	(UNSPEC_FMAXP, UNSPEC_FMAXNMP, UNSPEC_FMLALB, UNSPEC_FMLALT)
	(UNSPEC_FMLSLB, UNSPEC_FMLSLT, UNSPEC_FMINP, UNSPEC_FMINNMP)
	(UNSPEC_HISTCNT, UNSPEC_HISTSEG, UNSPEC_MATCH, UNSPEC_NMATCH)
	(UNSPEC_PMULLB, UNSPEC_PMULLB_PAIR, UNSPEC_PMULLT, UNSPEC_PMULLT_PAIR)
	(UNSPEC_RADDHNB, UNSPEC_RADDHNT, UNSPEC_RSUBHNB, UNSPEC_RSUBHNT)
	(UNSPEC_SLI, UNSPEC_SRI, UNSPEC_SABDLB, UNSPEC_SABDLT, UNSPEC_SADDLB)
	(UNSPEC_SADDLBT, UNSPEC_SADDLT, UNSPEC_SADDWB, UNSPEC_SADDWT)
	(UNSPEC_SBCLB, UNSPEC_SBCLT, UNSPEC_SMAXP, UNSPEC_SMINP)
	(UNSPEC_SQCADD90, UNSPEC_SQCADD270, UNSPEC_SQDMULLB, UNSPEC_SQDMULLBT)
	(UNSPEC_SQDMULLT, UNSPEC_SQRDCMLAH, UNSPEC_SQRDCMLAH90)
	(UNSPEC_SQRDCMLAH180, UNSPEC_SQRDCMLAH270, UNSPEC_SQRSHRNB)
	(UNSPEC_SQRSHRNT, UNSPEC_SQRSHRUNB, UNSPEC_SQRSHRUNT, UNSPEC_SQSHRNB)
	(UNSPEC_SQSHRNT, UNSPEC_SQSHRUNB, UNSPEC_SQSHRUNT, UNSPEC_SQXTNB)
	(UNSPEC_SQXTNT, UNSPEC_SQXTUNB, UNSPEC_SQXTUNT, UNSPEC_SSHLLB)
	(UNSPEC_SSHLLT, UNSPEC_SSUBLB, UNSPEC_SSUBLBT, UNSPEC_SSUBLT)
	(UNSPEC_SSUBLTB, UNSPEC_SSUBWB, UNSPEC_SSUBWT, UNSPEC_SUBHNB)
	(UNSPEC_SUBHNT, UNSPEC_TBL2, UNSPEC_UABDLB, UNSPEC_UABDLT)
	(UNSPEC_UADDLB, UNSPEC_UADDLT, UNSPEC_UADDWB, UNSPEC_UADDWT)
	(UNSPEC_UMAXP, UNSPEC_UMINP, UNSPEC_UQRSHRNB, UNSPEC_UQRSHRNT)
	(UNSPEC_UQSHRNB, UNSPEC_UQSHRNT, UNSPEC_UQXTNB, UNSPEC_UQXTNT)
	(UNSPEC_USHLLB, UNSPEC_USHLLT, UNSPEC_USUBLB, UNSPEC_USUBLT)
	(UNSPEC_USUBWB, UNSPEC_USUBWT): New unspecs.
	(UNSPEC_SMULLB, UNSPEC_SMULLT, UNSPEC_UMULLB, UNSPEC_UMULLT)
	(UNSPEC_SMULHS, UNSPEC_SMULHRS, UNSPEC_UMULHS, UNSPEC_UMULHRS)
	(UNSPEC_RSHRNB, UNSPEC_RSHRNT, UNSPEC_SHRNB, UNSPEC_SHRNT): Move
	further down file.
	(VNARROW, Ventype): New mode attributes.
	(Vewtype): Handle VNx2DI.  Fix typo in comment.
	(VDOUBLE): New mode attribute.
	(sve_lane_con): Handle VNx8HI.
	(SVE_INT_UNARY): Include ss_abs and ss_neg for TARGET_SVE2.
	(SVE_INT_BINARY): Likewise ss_plus, us_plus, ss_minus and us_minus.
	(sve_int_op, sve_int_op_rev): Handle the above codes.
	(sve_pred_int_rhs2_operand): Likewise.
	(MULLBT, SHRNB, SHRNT): Delete.
	(SVE_INT_SHIFT_IMM): New int iterator.
	(SVE_WHILE): Add UNSPEC_WHILEGE, UNSPEC_WHILEGT, UNSPEC_WHILEHI
	and UNSPEC_WHILEHS for TARGET_SVE2.
	(SVE2_U32_UNARY, SVE2_INT_UNARY_NARROWB, SVE2_INT_UNARY_NARROWT)
	(SVE2_INT_BINARY, SVE2_INT_BINARY_LANE, SVE2_INT_BINARY_LONG)
	(SVE2_INT_BINARY_LONG_LANE, SVE2_INT_BINARY_NARROWB)
	(SVE2_INT_BINARY_NARROWT, SVE2_INT_BINARY_PAIR, SVE2_FP_BINARY_PAIR)
	(SVE2_INT_BINARY_PAIR_LONG, SVE2_INT_BINARY_WIDE): New int iterators.
	(SVE2_INT_SHIFT_IMM_LONG, SVE2_INT_SHIFT_IMM_NARROWB): Likewise.
	(SVE2_INT_SHIFT_IMM_NARROWT, SVE2_INT_SHIFT_INSERT, SVE2_INT_CADD)
	(SVE2_INT_BITPERM, SVE2_INT_TERNARY, SVE2_INT_TERNARY_LANE): Likewise.
	(SVE2_FP_TERNARY_LONG, SVE2_FP_TERNARY_LONG_LANE, SVE2_INT_CMLA)
	(SVE2_INT_CDOT, SVE2_INT_ADD_BINARY_LONG, SVE2_INT_QADD_BINARY_LONG)
	(SVE2_INT_SUB_BINARY_LONG, SVE2_INT_QSUB_BINARY_LONG): Likewise.
	(SVE2_INT_ADD_BINARY_LONG_LANE, SVE2_INT_QADD_BINARY_LONG_LANE)
	(SVE2_INT_SUB_BINARY_LONG_LANE, SVE2_INT_QSUB_BINARY_LONG_LANE)
	(SVE2_COND_INT_UNARY_FP, SVE2_COND_FP_UNARY_LONG): Likewise.
	(SVE2_COND_FP_UNARY_NARROWB, SVE2_COND_INT_BINARY): Likewise.
	(SVE2_COND_INT_BINARY_NOREV, SVE2_COND_INT_BINARY_REV): Likewise.
	(SVE2_COND_INT_SHIFT, SVE2_MATCH, SVE2_PMULL): Likewise.
	(optab): Handle the new unspecs.
	(su, r): Remove entries for UNSPEC_SHRNB, UNSPEC_SHRNT, UNSPEC_RSHRNB
	and UNSPEC_RSHRNT.
	(lr): Handle the new unspecs.
	(bt): Delete.
	(cmp_op, while_optab_cmp, sve_int_op): Handle the new unspecs.
	(sve_int_op_rev, sve_int_add_op, sve_int_qadd_op, sve_int_sub_op)
	(sve_int_qsub_op): New int attributes.
	(sve_fp_op, rot): Handle the new unspecs.
	* config/aarch64/aarch64-sve-builtins.h
	(function_resolver::require_matching_pointer_type): Declare.
	(function_resolver::resolve_unary): Add an optional boolean argument.
	(function_resolver::finish_opt_n_resolution): Add an optional
	type_suffix_index argument.
	(gimple_folder::redirect_call): Declare.
	(gimple_expander::prepare_gather_address_operands): Add an optional
	bool parameter.
	* config/aarch64/aarch64-sve-builtins.cc: Include
	aarch64-sve-builtins-sve2.h.
	(TYPES_b_unsigned, TYPES_b_integer, TYPES_bh_integer): New macros.
	(TYPES_bs_unsigned, TYPES_hs_signed, TYPES_hs_integer): Likewise.
	(TYPES_hd_unsigned, TYPES_hsd_signed): Likewise.
	(TYPES_hsd_integer): Use TYPES_hsd_signed.
	(TYPES_s_float_hsd_integer, TYPES_s_float_sd_integer): New macros.
	(TYPES_s_unsigned): Likewise.
	(TYPES_s_integer): Use TYPES_s_unsigned.
	(TYPES_sd_signed, TYPES_sd_unsigned): New macros.
	(TYPES_sd_integer): Use them.
	(TYPES_d_unsigned): New macro.
	(TYPES_d_integer): Use it.
	(TYPES_d_data, TYPES_cvt_long, TYPES_cvt_narrow_s): New macros.
	(TYPES_cvt_narrow): Likewise.
	(DEF_SVE_TYPES_ARRAY): Include the new types macros above.
	(preds_mx): New variable.
	(function_builder::add_overloaded_function): Allow the new feature
	set to be more restrictive than the original one.
	(function_resolver::infer_pointer_type): Remove qualifiers from
	the pointer type before printing it.
	(function_resolver::require_matching_pointer_type): New function.
	(function_resolver::resolve_sv_displacement): Handle functions
	that don't support 32-bit vector indices or svint32_t vector offsets.
	(function_resolver::finish_opt_n_resolution): Take the inferred type
	as a separate argument.
	(function_resolver::resolve_unary): Optionally treat all forms in
	the same way as normal merging functions.
	(gimple_folder::redirect_call): New function.
	(function_expander::prepare_gather_address_operands): Add an argument
	that says whether scaled forms are available.  If they aren't,
	handle scaling of vector indices and don't add the extension and
	scaling operands.
	(function_expander::map_to_unspecs): If aarch64_sve isn't available,
	fall back to using cond_* instead.
	* config/aarch64/aarch64-sve-builtins-functions.h (rtx_code_function):
	Split out the member variables into...
	(rtx_code_function_base): ...this new base class.
	(rtx_code_function_rotated): Inherit rtx_code_function_base.
	(unspec_based_function): Split out the member variables into...
	(unspec_based_function_base): ...this new base class.
	(unspec_based_function_rotated): Inherit unspec_based_function_base.
	(unspec_based_function_exact_insn): New class.
	(unspec_based_add_function, unspec_based_add_lane_function)
	(unspec_based_lane_function, unspec_based_pred_function)
	(unspec_based_qadd_function, unspec_based_qadd_lane_function)
	(unspec_based_qsub_function, unspec_based_qsub_lane_function)
	(unspec_based_sub_function, unspec_based_sub_lane_function): New
	typedefs.
	(unspec_based_fused_function): New class.
	(unspec_based_mla_function, unspec_based_mls_function): New typedefs.
	(unspec_based_fused_lane_function): New class.
	(unspec_based_mla_lane_function, unspec_based_mls_lane_function): New
	typedefs.
	(CODE_FOR_MODE1): New macro.
	(fixed_insn_function): New class.
	(while_comparison): Likewise.
	* config/aarch64/aarch64-sve-builtins-shapes.h (binary_long_lane)
	(binary_long_opt_n, binary_narrowb_opt_n, binary_narrowt_opt_n)
	(binary_to_uint, binary_wide, binary_wide_opt_n, compare, compare_ptr)
	(load_ext_gather_index_restricted, load_ext_gather_offset_restricted)
	(load_gather_sv_restricted, shift_left_imm_long): Declare.
	(shift_left_imm_to_uint, shift_right_imm_narrowb): Likewise.
	(shift_right_imm_narrowt, shift_right_imm_narrowb_to_uint): Likewise.
	(shift_right_imm_narrowt_to_uint, store_scatter_index_restricted)
	(store_scatter_offset_restricted, tbl_tuple, ternary_long_lane)
	(ternary_long_opt_n, ternary_qq_lane_rotate, ternary_qq_rotate)
	(ternary_shift_left_imm, ternary_shift_right_imm, ternary_uint)
	(unary_convert_narrowt, unary_long, unary_narrowb, unary_narrowt)
	(unary_narrowb_to_uint, unary_narrowt_to_uint, unary_to_int): Likewise.
	* config/aarch64/aarch64-sve-builtins-shapes.cc (apply_predication):
	Also add an initial argument for unary_convert_narrowt, regardless
	of the predication type.
	(build_32_64): Allow loads and stores to specify MODE_none.
	(build_sv_index64, build_sv_uint_offset): New functions.
	(long_type_suffix): New function.
	(binary_imm_narrowb_base, binary_imm_narrowt_base): New classes.
	(binary_imm_long_base, load_gather_sv_base): Likewise.
	(shift_right_imm_narrow_wrapper, ternary_shift_imm_base): Likewise.
	(ternary_resize2_opt_n_base, ternary_resize2_lane_base): Likewise.
	(unary_narrowb_base, unary_narrowt_base): Likewise.
	(binary_long_lane_def, binary_long_lane): New shape.
	(binary_long_opt_n_def, binary_long_opt_n): Likewise.
	(binary_narrowb_opt_n_def, binary_narrowb_opt_n): Likewise.
	(binary_narrowt_opt_n_def, binary_narrowt_opt_n): Likewise.
	(binary_to_uint_def, binary_to_uint): Likewise.
	(binary_wide_def, binary_wide): Likewise.
	(binary_wide_opt_n_def, binary_wide_opt_n): Likewise.
	(compare_def, compare): Likewise.
	(compare_ptr_def, compare_ptr): Likewise.
	(load_ext_gather_index_restricted_def,
	load_ext_gather_index_restricted): Likewise.
	(load_ext_gather_offset_restricted_def,
	load_ext_gather_offset_restricted): Likewise.
	(load_gather_sv_def): Inherit from load_gather_sv_base.
	(load_gather_sv_restricted_def, load_gather_sv_restricted): New shape.
	(shift_left_imm_def, shift_left_imm): Likewise.
	(shift_left_imm_long_def, shift_left_imm_long): Likewise.
	(shift_left_imm_to_uint_def, shift_left_imm_to_uint): Likewise.
	(store_scatter_index_restricted_def,
	store_scatter_index_restricted): Likewise.
	(store_scatter_offset_restricted_def,
	store_scatter_offset_restricted): Likewise.
	(tbl_tuple_def, tbl_tuple): Likewise.
	(ternary_long_lane_def, ternary_long_lane): Likewise.
	(ternary_long_opt_n_def, ternary_long_opt_n): Likewise.
	(ternary_qq_lane_def): Inherit from ternary_resize2_lane_base.
	(ternary_qq_lane_rotate_def, ternary_qq_lane_rotate): New shape
	(ternary_qq_opt_n_def): Inherit from ternary_resize2_opt_n_base.
	(ternary_qq_rotate_def, ternary_qq_rotate): New shape.
	(ternary_shift_left_imm_def, ternary_shift_left_imm): Likewise.
	(ternary_shift_right_imm_def, ternary_shift_right_imm): Likewise.
	(ternary_uint_def, ternary_uint): Likewise.
	(unary_convert): Fix typo in comment.
	(unary_convert_narrowt_def, unary_convert_narrowt): New shape.
	(unary_long_def, unary_long): Likewise.
	(unary_narrowb_def, unary_narrowb): Likewise.
	(unary_narrowt_def, unary_narrowt): Likewise.
	(unary_narrowb_to_uint_def, unary_narrowb_to_uint): Likewise.
	(unary_narrowt_to_uint_def, unary_narrowt_to_uint): Likewise.
	(unary_to_int_def, unary_to_int): Likewise.
	* config/aarch64/aarch64-sve-builtins-base.cc (unspec_cmla)
	(unspec_fcmla, unspec_cond_fcmla, expand_mla_mls_lane): New functions.
	(svasrd_impl): Delete.
	(svcadd_impl::expand): Handle integer operations too.
	(svcmla_impl::expand, svcmla_lane::expand): Likewise, using the
	new functions to derive the unspec numbers.
	(svmla_svmls_lane_impl): Replace with...
	(svmla_lane_impl, svmls_lane_impl): ...these new classes.  Handle
	integer operations too.
	(svwhile_impl): Rename to...
	(svwhilelx_impl): ...this and inherit from while_comparison.
	(svasrd): Use unspec_based_function.
	(svmla_lane): Use svmla_lane_impl.
	(svmls_lane): Use svmls_lane_impl.
	(svrecpe, svrsqrte): Handle unsigned integer operations too.
	(svwhilele, svwhilelt): Use svwhilelx_impl.
	* config/aarch64/aarch64-sve-builtins-sve2.h: New file.
	* config/aarch64/aarch64-sve-builtins-sve2.cc: Likewise.
	* config/aarch64/aarch64-sve-builtins-sve2.def: Likewise.
	* config/aarch64/aarch64-sve-builtins.def: Include
	aarch64-sve-builtins-sve2.def.

2020-01-09  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-protos.h (aarch64_sve_arith_immediate_p)
	(aarch64_sve_sqadd_sqsub_immediate_p): Add a machine_mode argument.
	* config/aarch64/aarch64.c (aarch64_sve_arith_immediate_p)
	(aarch64_sve_sqadd_sqsub_immediate_p): Likewise.  Handle scalar
	immediates as well as vector ones.
	* config/aarch64/predicates.md (aarch64_sve_arith_immediate)
	(aarch64_sve_sub_arith_immediate, aarch64_sve_qadd_immediate)
	(aarch64_sve_qsub_immediate): Update calls accordingly.

2020-01-09  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve2.md: Add banner comments.
	(<su>mulh<r>s<mode>3): Move further up file.
	(<su>mull<bt><Vwide>, <r>shrnb<mode>, <r>shrnt<mode>)
	(*aarch64_sve2_sra<mode>): Move further down file.
	* config/aarch64/t-aarch64 (s-check-sve-md): Check aarch64-sve2.md too.

2020-01-09  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/iterators.md (SVE_WHILE): Add UNSPEC_WHILERW
	and UNSPEC_WHILEWR.
	(while_optab_cmp): Handle them.
	* config/aarch64/aarch64-sve.md
	(*while_<while_optab_cmp><GPI:mode><PRED_ALL:mode>_ptest): Make public
	and add a "@" marker.
	* config/aarch64/aarch64-sve2.md (check_<raw_war>_ptrs<mode>): Use it
	instead of gen_aarch64_sve2_while_ptest.
	(@aarch64_sve2_while<cmp_op><GPI:mode><PRED_ALL:mode>_ptest): Delete.

2020-01-09  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.md (UNSPEC_WHILE_LE): Rename to...
	(UNSPEC_WHILELE): ...this.
	(UNSPEC_WHILE_LO): Rename to...
	(UNSPEC_WHILELO): ...this.
	(UNSPEC_WHILE_LS): Rename to...
	(UNSPEC_WHILELS): ...this.
	(UNSPEC_WHILE_LT): Rename to...
	(UNSPEC_WHILELT): ...this.
	* config/aarch64/iterators.md (SVE_WHILE): Update accordingly.
	(cmp_op, while_optab_cmp): Likewise.
	* config/aarch64/aarch64.c (aarch64_sve_move_pred_via_while): Likewise.
	* config/aarch64/aarch64-sve-builtins-base.cc (svwhilele): Likewise.
	(svwhilelt): Likewise.

2020-01-09  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve-builtins-shapes.h (unary_count): Delete.
	(unary_to_uint): Define.
	* config/aarch64/aarch64-sve-builtins-shapes.cc (unary_count_def)
	(unary_count): Rename to...
	(unary_to_uint_def, unary_to_uint): ...this.
	* config/aarch64/aarch64-sve-builtins-base.def: Update accordingly.

2020-01-09  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve-builtins-functions.h
	(code_for_mode_function): New class.
	(CODE_FOR_MODE0, QUIET_CODE_FOR_MODE0): New macros.
	* config/aarch64/aarch64-sve-builtins-base.cc (svcompact_impl)
	(svext_impl, svmul_lane_impl, svsplice_impl, svtmad_impl): Delete.
	(svcompact, svext, svsplice): Use QUIET_CODE_FOR_MODE0.
	(svmul_lane, svtmad): Use CODE_FOR_MODE0.

2020-01-09  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/iterators.md (addsub): New code attribute.
	* config/aarch64/aarch64-simd.md (aarch64_<su_optab><optab><mode>):
	Re-express as...
	(aarch64_<su_optab>q<addsub><mode>): ...this, making the same change
	in the asm string and attributes.  Fix indentation.
	* config/aarch64/aarch64-sve.md (@aarch64_<su_optab><optab><mode>):
	Re-express as...
	(@aarch64_sve_<optab><mode>): ...this.
	* config/aarch64/aarch64-sve-builtins.h
	(function_expander::expand_signed_unpred_op): Delete.
	* config/aarch64/aarch64-sve-builtins.cc
	(function_expander::expand_signed_unpred_op): Likewise.
	(function_expander::map_to_rtx_codes): If the optab isn't defined,
	try using code_for_aarch64_sve instead.
	* config/aarch64/aarch64-sve-builtins-base.cc (svqadd_impl): Delete.
	(svqsub_impl): Likewise.
	(svqadd, svqsub): Use rtx_code_function instead.

2020-01-09  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/iterators.md (SRHSUB, URHSUB): Delete.
	(HADDSUB, sur, addsub): Remove them.

2020-01-09  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-nrv.c (pass_return_slot::execute): Handle all internal
	functions the same way, rather than singling out those that
	aren't mapped directly to optabs.

2020-01-09  Richard Sandiford  <richard.sandiford@arm.com>

	* target.def (compatible_vector_types_p): New target hook.
	* hooks.h (hook_bool_const_tree_const_tree_true): Declare.
	* hooks.c (hook_bool_const_tree_const_tree_true): New function.
	* doc/tm.texi.in (TARGET_COMPATIBLE_VECTOR_TYPES_P): New hook.
	* doc/tm.texi: Regenerate.
	* gimple-expr.c: Include target.h.
	(useless_type_conversion_p): Use targetm.compatible_vector_types_p.
	* config/aarch64/aarch64.c (aarch64_compatible_vector_types_p): New
	function.
	(TARGET_COMPATIBLE_VECTOR_TYPES_P): Define.
	* config/aarch64/aarch64-sve-builtins.cc (gimple_folder::convert_pred):
	Use the original predicate if it already has a suitable type.

2020-01-09  Martin Jambor  <mjambor@suse.cz>

	* cgraph.h (cgraph_edge): Make remove, set_call_stmt, make_direct,
	resolve_speculation and redirect_call_stmt_to_callee static.  Change
	return type of set_call_stmt to cgraph_edge *.
	* auto-profile.c (afdo_indirect_call): Adjust call to
	redirect_call_stmt_to_callee.
	* cgraph.c (cgraph_edge::set_call_stmt): Make return cgraph-edge *,
	make the this pointer explicit, adjust self-recursive calls and the
	call top make_direct.  Return the resulting edge.
	(cgraph_edge::remove): Make this pointer explicit.
	(cgraph_edge::resolve_speculation): Likewise, adjust call to remove.
	(cgraph_edge::make_direct): Likewise, adjust call to
	resolve_speculation.
	(cgraph_edge::redirect_call_stmt_to_callee): Likewise, also adjust
	call to set_call_stmt.
	(cgraph_update_edges_for_call_stmt_node): Update call to
	set_call_stmt and remove.
	* cgraphclones.c (cgraph_node::set_call_stmt_including_clones):
	Renamed edge to master_edge.  Adjusted calls to set_call_stmt.
	(cgraph_node::create_edge_including_clones): Moved "first" definition
	of edge to the block where it was used.  Adjusted calls to
	set_call_stmt.
	(cgraph_node::remove_symbol_and_inline_clones): Adjust call to
	cgraph_edge::remove.
	* cgraphunit.c (walk_polymorphic_call_targets): Adjusted calls to
	make_direct and redirect_call_stmt_to_callee.
	* ipa-fnsummary.c (redirect_to_unreachable): Adjust calls to
	resolve_speculation and make_direct.
	* ipa-inline-transform.c (inline_transform): Adjust call to
	redirect_call_stmt_to_callee.
	(check_speculations_1):: Adjust call to resolve_speculation.
	* ipa-inline.c (resolve_noninline_speculation): Adjust call to
	resolve-speculation.
	(inline_small_functions): Adjust call to resolve_speculation.
	(ipa_inline): Likewise.
	* ipa-prop.c (ipa_make_edge_direct_to_target): Adjust call to
	make_direct.
	* ipa-visibility.c (function_and_variable_visibility): Make iteration
	safe with regards to edge removal, adjust calls to
	redirect_call_stmt_to_callee.
	* ipa.c (walk_polymorphic_call_targets): Adjust calls to make_direct
	and redirect_call_stmt_to_callee.
	* multiple_target.c (create_dispatcher_calls): Adjust call to
	redirect_call_stmt_to_callee
	(redirect_to_specific_clone): Likewise.
	* tree-cfgcleanup.c (delete_unreachable_blocks_update_callgraph):
	Adjust calls to cgraph_edge::remove.
	* tree-inline.c (copy_bb): Adjust call to set_call_stmt.
	(redirect_all_calls): Adjust call to redirect_call_stmt_to_callee.
	(expand_call_inline): Adjust call to cgraph_edge::remove.

2020-01-09  Martin Liska  <mliska@suse.cz>

	* params.opt: Set Optimization for
	param_max_speculative_devirt_maydefs.

2020-01-09  Martin Sebor  <msebor@redhat.com>

	PR middle-end/93200
	PR fortran/92956
	* builtins.c (compute_objsize): Avoid handling MEM_REFs of vector type.

2020-01-09  Martin Liska  <mliska@suse.cz>

	* auto-profile.c (auto_profile): Use opt_for_fn
	for a parameter.
	* ipa-cp.c (ipcp_lattice::add_value): Likewise.
	(propagate_vals_across_arith_jfunc): Likewise.
	(hint_time_bonus): Likewise.
	(incorporate_penalties): Likewise.
	(good_cloning_opportunity_p): Likewise.
	(perform_estimation_of_a_value): Likewise.
	(estimate_local_effects): Likewise.
	(ipcp_propagate_stage): Likewise.
	* ipa-fnsummary.c (decompose_param_expr): Likewise.
	(set_switch_stmt_execution_predicate): Likewise.
	(analyze_function_body): Likewise.
	* ipa-inline-analysis.c (offline_size): Likewise.
	* ipa-inline.c (early_inliner): Likewise.
	* ipa-prop.c (ipa_analyze_node): Likewise.
	(ipcp_transform_function): Likewise.
	* ipa-sra.c (process_scan_results): Likewise.
	(ipa_sra_summarize_function): Likewise.
	* params.opt: Rename ipcp-unit-growth to
	ipa-cp-unit-growth.  Add Optimization for various
	IPA-related parameters.

2020-01-09  Richard Biener  <rguenther@suse.de>

	PR middle-end/93054
	* gimplify.c (gimplify_expr): Deal with NOP definitions.

2020-01-09  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/93040
	* gimple-ssa-store-merging.c (find_bswap_or_nop): Raise search limit.

2020-01-09  Georg-Johann Lay  <avr@gjlay.de>

	* common/config/avr/avr-common.c (avr_option_optimization_table)
	[OPT_LEVELS_1_PLUS]: Set -fsplit-wide-types-early.

2020-01-09  Martin Liska  <mliska@suse.cz>

	* cgraphclones.c (symbol_table::materialize_all_clones):
	Use cgraph_node::dump_name.

2020-01-09  Jakub Jelinek  <jakub@redhat.com>

	PR inline-asm/93202
	* config/riscv/riscv.c (riscv_print_operand_reloc): Use
	output_operand_lossage instead of gcc_unreachable.
	* doc/md.texi (riscv f constraint): Fix typo.

	PR target/93141
	* config/i386/i386.md (subv<mode>4): Use SWIDWI iterator instead of
	SWI.  Use <general_hilo_operand> instead of <general_operand>.  Use
	CONST_SCALAR_INT_P instead of CONST_INT_P.
	(*subv<mode>4_1): Rename to ...
	(subv<mode>4_1): ... this.
	(*subv<dwi>4_doubleword, *addv<dwi>4_doubleword_1): New
	define_insn_and_split patterns.
	(*subv<mode>4_overflow_1, *addv<mode>4_overflow_2): New define_insn
	patterns.

2020-01-08  David Malcolm  <dmalcolm@redhat.com>

	* vec.c (class selftest::count_dtor): New class.
	(selftest::test_auto_delete_vec): New test.
	(selftest::vec_c_tests): Call it.
	* vec.h (class auto_delete_vec): New class template.
	(auto_delete_vec<T>::~auto_delete_vec): New dtor.

2020-01-08  David Malcolm  <dmalcolm@redhat.com>

	* sbitmap.h (auto_sbitmap): Add operator const_sbitmap.

2020-01-08  Jim Wilson  <jimw@sifive.com>

	* config/riscv/riscv.c (riscv_legitimize_tls_address): Ifdef out
	use of TLS_MODEL_LOCAL_EXEC when not pic.

2020-01-08  David Malcolm  <dmalcolm@redhat.com>

	* hash-map-tests.c (selftest::test_map_of_strings_to_int): Fix
	memory leak.

2020-01-08  Jakub Jelinek  <jakub@redhat.com>

	PR target/93187
	* config/i386/i386.md (*stack_protect_set_2_<mode> peephole2,
	*stack_protect_set_3 peephole2): Also check that the second
	insns source is general_operand.

	PR target/93174
	* config/i386/i386.md (addcarry<mode>_0): Use nonimmediate_operand
	predicate for output operand instead of register_operand.
	(addcarry<mode>, addcarry<mode>_1): Likewise.  Add alternative with
	memory destination and non-memory operands[2].

2020-01-08  Martin Liska  <mliska@suse.cz>

	* cgraph.c (cgraph_node::dump): Use ::dump_name or
	::dump_asm_name instead of (::name or ::asm_name).
	* cgraphclones.c (symbol_table::materialize_all_clones): Likewise.
	* cgraphunit.c (walk_polymorphic_call_targets): Likewise.
	(analyze_functions): Likewise.
	(expand_all_functions): Likewise.
	* ipa-cp.c (ipcp_cloning_candidate_p): Likewise.
	(propagate_bits_across_jump_function): Likewise.
	(dump_profile_updates): Likewise.
	(ipcp_store_bits_results): Likewise.
	(ipcp_store_vr_results): Likewise.
	* ipa-devirt.c (dump_targets): Likewise.
	* ipa-fnsummary.c (analyze_function_body): Likewise.
	* ipa-hsa.c (check_warn_node_versionable): Likewise.
	(process_hsa_functions): Likewise.
	* ipa-icf.c (sem_item_optimizer::merge_classes): Likewise.
	(set_alias_uids): Likewise.
	* ipa-inline-transform.c (save_inline_function_body): Likewise.
	* ipa-inline.c (recursive_inlining): Likewise.
	(inline_to_all_callers_1): Likewise.
	(ipa_inline): Likewise.
	* ipa-profile.c (ipa_propagate_frequency_1): Likewise.
	(ipa_propagate_frequency): Likewise.
	* ipa-prop.c (ipa_make_edge_direct_to_target): Likewise.
	(remove_described_reference): Likewise.
	* ipa-pure-const.c (worse_state): Likewise.
	(check_retval_uses): Likewise.
	(analyze_function): Likewise.
	(propagate_pure_const): Likewise.
	(propagate_nothrow): Likewise.
	(dump_malloc_lattice): Likewise.
	(propagate_malloc): Likewise.
	(pass_local_pure_const::execute): Likewise.
	* ipa-visibility.c (optimize_weakref): Likewise.
	(function_and_variable_visibility): Likewise.
	* ipa.c (symbol_table::remove_unreachable_nodes): Likewise.
	(ipa_discover_variable_flags): Likewise.
	* lto-streamer-out.c (output_function): Likewise.
	(output_constructor): Likewise.
	* tree-inline.c (copy_bb): Likewise.
	* tree-ssa-structalias.c (ipa_pta_execute): Likewise.
	* varpool.c (symbol_table::remove_unreferenced_decls): Likewise.

2020-01-08  Richard Biener  <rguenther@suse.de>

	PR middle-end/93199
	* tree-eh.c (sink_clobbers): Update virtual operands for
	the first and last stmt only.  Add a dry-run capability.
	(pass_lower_eh_dispatch::execute): Perform clobber sinking
	after CFG manipulations and in RPO order to catch all
	secondary opportunities reliably.

2020-01-08  Georg-Johann Lay  <avr@gjlay.de>

	PR target/93182
	* doc/invoke.texi (AVR Options) <-nodevicespecs>: Document.

2019-01-08  Richard Biener  <rguenther@suse.de>

	PR middle-end/93199
	* gimple-fold.c (rewrite_to_defined_overflow): Mark stmt modified.
	* tree-ssa-loop-im.c (move_computations_worker): Properly adjust
	virtual operand, also updating SSA use.
	* gimple-loop-interchange.cc (loop_cand::undo_simple_reduction):
	Update stmt after resetting virtual operand.
	(tree_loop_interchange::move_code_to_inner_loop): Likewise.
	* gimple-iterator.c (gsi_remove): When not removing the stmt
	permanently do not delink immediate uses or mark the stmt modified.

2020-01-08  Martin Liska  <mliska@suse.cz>

	* ipa-fnsummary.c (dump_ipa_call_summary): Use symtab_node::dump_name.
	(ipa_call_context::estimate_size_and_time): Likewise.
	(inline_analyze_function): Likewise.

2020-01-08  Martin Liska  <mliska@suse.cz>

	* cgraph.c (cgraph_node::dump): Use systematically
	dump_asm_name.

2020-01-08  Georg-Johann Lay  <avr@gjlay.de>

	Add -nodevicespecs option for avr.

	PR target/93182
	* config/avr/avr.opt (-nodevicespecs): New driver option.
	* config/avr/driver-avr.c (avr_devicespecs_file): Only issue
	"-specs=device-specs/..." if that option is not set.
	* doc/invoke.texi (AVR Options) <-nodevicespecs>: Document.

2020-01-08  Georg-Johann Lay  <avr@gjlay.de>

	Implement 64-bit double functions for avr.

	PR target/92055
	* config.gcc (tm_defines) [target=avr]: Support --with-libf7,
	--with-double-comparison.
	* doc/install.texi: Document them.
	* config/avr/avr-c.c (avr_cpu_cpp_builtins)
	<WITH_LIBF7_LIBGCC, WITH_LIBF7_MATH, WITH_LIBF7_MATH_SYMBOLS>
	<WITH_DOUBLE_COMPARISON>: New built-in defines.
	* doc/invoke.texi (AVR Built-in Macros): Document them.
	* config/avr/avr-protos.h (avr_float_lib_compare_returns_bool): New.
	* config/avr/avr.c (avr_float_lib_compare_returns_bool): New function.
	* config/avr/avr.h (FLOAT_LIB_COMPARE_RETURNS_BOOL): New macro.

2020-01-08  Richard Earnshaw  <rearnsha@arm.com>

	PR target/93188
	* config/arm/t-multilib (MULTILIB_MATCHES): Add rules to match
	armv7-a{+mp,+sec,+mp+sec} to appropriate armv7 multilib variants
	when only building rm-profile multilibs.

2020-01-08  Feng Xue  <fxue@os.amperecomputing.com>

	PR ipa/93084
	* ipa-cp.c (self_recursively_generated_p): Find matched aggregate
	lattice for a value to check.
	(propagate_vals_across_arith_jfunc): Add an assertion to ensure
	finite propagation in self-recursive scc.

2020-01-08  Luo Xiong Hu  <luoxhu@linux.ibm.com>

	* ipa-inline.c (caller_growth_limits): Restore the AND.

2020-01-07  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-valu.md (VEC_1REG_INT_ALT): Delete iterator.
	(VEC_ALLREG_ALT): New iterator.
	(VEC_ALLREG_INT_MODE): New iterator.
	(VCMP_MODE): New iterator.
	(VCMP_MODE_INT): New iterator.
	(vec_cmpu<mode>di): Use VCMP_MODE_INT.
	(vec_cmp<u>v64qidi): New define_expand.
	(vec_cmp<mode>di_exec): Use VCMP_MODE.
	(vec_cmpu<mode>di_exec): New define_expand.
	(vec_cmp<u>v64qidi_exec): New define_expand.
	(vec_cmp<mode>di_dup): Use VCMP_MODE.
	(vec_cmp<mode>di_dup_exec): Use VCMP_MODE.
	(vcond<VEC_ALL1REG_MODE:mode><VEC_1REG_ALT:mode>): Rename ...
	(vcond<VEC_ALLREG_MODE:mode><VEC_ALLREG_ALT:mode>): ... to this.
	(vcond<VEC_ALL1REG_MODE:mode><VEC_1REG_ALT:mode>_exec): Rename ...
	(vcond<VEC_ALLREG_MODE:mode><VEC_ALLREG_ALT:mode>_exec): ... to this.
	(vcondu<VEC_ALL1REG_MODE:mode><VEC_1REG_INT_ALT:mode>): Rename ...
	(vcondu<VEC_ALLREG_MODE:mode><VEC_ALLREG_INT_MODE:mode>): ... to this.
	(vcondu<VEC_ALL1REG_MODE:mode><VEC_1REG_INT_ALT:mode>_exec): Rename ...
	(vcondu<VEC_ALLREG_MODE:mode><VEC_ALLREG_INT_MODE:mode>_exec): ... to
	this.
	* config/gcn/gcn.c (print_operand): Fix 8 and 16 bit suffixes.
	* config/gcn/gcn.md (expander): Add sign_extend and zero_extend.

2020-01-07  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/constraints.md (DA): Update description and match.
	(DB): Likewise.
	(Db): New constraint.
	* config/gcn/gcn-protos.h (gcn_inline_constant64_p): Add second
	parameter.
	* config/gcn/gcn.c (gcn_inline_constant64_p): Add 'mixed' parameter.
	Implement 'Db' mixed immediate type.
	* config/gcn/gcn-valu.md (addcv64si3<exec_vcc>): Rework constraints.
	(addcv64si3_dup<exec_vcc>): Delete.
	(subcv64si3<exec_vcc>): Rework constraints.
	(addv64di3): Rework constraints.
	(addv64di3_exec): Rework constraints.
	(subv64di3): Rework constraints.
	(addv64di3_dup): Delete.
	(addv64di3_dup_exec): Delete.
	(addv64di3_zext): Rework constraints.
	(addv64di3_zext_exec): Rework constraints.
	(addv64di3_zext_dup): Rework constraints.
	(addv64di3_zext_dup_exec): Rework constraints.
	(addv64di3_zext_dup2): Rework constraints.
	(addv64di3_zext_dup2_exec): Rework constraints.
	(addv64di3_sext_dup2): Rework constraints.
	(addv64di3_sext_dup2_exec): Rework constraints.

2020-01-07  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* doc/sourcebuild.texi (arm_little_endian, arm_nothumb): Documented
	existing target checks.

2020-01-07  Richard Biener  <rguenther@suse.de>

	* doc/install.texi: Bump minimal supported MPC version.

2020-01-07  Richard Sandiford  <richard.sandiford@arm.com>

	* langhooks-def.h (lhd_simulate_enum_decl): Declare.
	(LANG_HOOKS_SIMULATE_ENUM_DECL): Use it.
	* langhooks.c: Include stor-layout.h.
	(lhd_simulate_enum_decl): New function.
	* config/aarch64/aarch64-sve-builtins.cc (init_builtins): Call
	handle_arm_sve_h for the LTO frontend.
	(register_vector_type): Cope with null returns from pushdecl.

2020-01-07  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-protos.h (aarch64_sve::svbool_type_p)
	(aarch64_sve::nvectors_if_data_type): Replace with...
	(aarch64_sve::builtin_type_p): ...this.
	* config/aarch64/aarch64-sve-builtins.cc: Include attribs.h.
	(find_vector_type): Delete.
	(add_sve_type_attribute): New function.
	(lookup_sve_type_attribute): Likewise.
	(register_builtin_types): Add an "SVE type" attribute to each type.
	(register_tuple_type): Likewise.
	(svbool_type_p, nvectors_if_data_type): Delete.
	(mangle_builtin_type): Use lookup_sve_type_attribute.
	(builtin_type_p): Likewise.  Add an overload that returns the
	number of constituent vector and predicate registers.
	* config/aarch64/aarch64.c (aarch64_sve_argument_p): Delete.
	(aarch64_returns_value_in_sve_regs_p): Use aarch64_sve::builtin_type_p
	instead of aarch64_sve_argument_p.
	(aarch64_takes_arguments_in_sve_regs_p): Likewise.
	(aarch64_pass_by_reference): Likewise.
	(aarch64_function_value_1): Likewise.
	(aarch64_return_in_memory): Likewise.
	(aarch64_layout_arg): Likewise.

2020-01-07  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/93156
	* tree-ssa-ccp.c (bit_value_binop): For x * x note that the second
	least significant bit is always clear.

	PR tree-optimization/93118
	* match.pd ((x >> c) << c -> x & (-1<<c)): Add nop_convert?.  Add new
	simplifier with two intermediate conversions.

2020-01-07  Martin Liska  <mliska@suse.cz>

	* params.opt: Add Optimization for various parameters.

2020-01-07  Martin Liska  <mliska@suse.cz>

	PR ipa/83411
	* doc/extend.texi: Explain cloning for target_clone
	attribute.

2020-01-07  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/92860
	* common.opt: Make in Optimization option
	as it is affected by -O0, which is an Optimization
	option.
	* tree-inline.c (tree_inlinable_function_p):
	Use opt_for_fn for warn_inline.
	(expand_call_inline): Likewise.

2020-01-07  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/92860
	* common.opt: Make flag_ree as optimization
	attribute. 

2020-01-07  Martin Liska  <mliska@suse.cz>

	PR optimization/92860
	* params.opt: Mark param_min_crossjump_insns with Optimization
	keyword.

2020-01-07  Luo Xiong Hu  <luoxhu@linux.ibm.com>

	* ipa-inline-analysis.c (estimate_growth): Fix typo.
	* ipa-inline.c (caller_growth_limits): Use OR instead of AND.

2020-01-06  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/rs6000.c (hard_reg_and_mode_to_addr_mask): New
	helper function to return the valid addressing formats for a given
	hard register and mode.
	(rs6000_adjust_vec_address): Call hard_reg_and_mode_to_addr_mask.

	* config/rs6000/constraints.md (Q constraint): Update
	documentation.
	* doc/md.texi (RS/6000 constraints): Update 'Q' cosntraint
	documentation.

	* config/rs6000/vsx.md (vsx_extract_<mode>_var, VSX_D iterator):
	Use 'Q' for doing vector extract from memory.
	(vsx_extract_v4sf_var): Use 'Q' for doing vector extract from
	memory.
	(vsx_extract_<mode>_var, VSX_EXTRACT_I iterator): Use 'Q' for
	doing vector extract from memory.
	(vsx_extract_<mode>_<VS_scalar>mode_var): Use 'Q' for doing vector
	extract from memory.

	* config/rs6000/rs6000.c (rs6000_adjust_vec_address): Add support
	for the offset being 34-bits when -mcpu=future is used.

2020-01-06  John David Anglin  <danglin@gcc.gnu.org>

	* config/pa/pa.md: Revert change to use ordered_comparison_operator
	instead of cmpib_comparison_operator in cmpib patterns.
	* config/pa/predicates.md (cmpib_comparison_operator): Revert removal
	of cmpib_comparison_operator.  Revise comment.

2020-01-06  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-slp.c (vect_build_slp_tree_1): Require all shifts
	in an IFN_DIV_POW2 node to be equal.

2020-01-06  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-stmts.c (vect_check_load_store_mask): Rename to...
	(vect_check_scalar_mask): ...this.
	(vectorizable_store, vectorizable_load): Update call accordingly.
	(vectorizable_call): Use vect_check_scalar_mask to check the mask
	argument in calls to conditional internal functions.

2020-01-06  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-valu.md (subv64di3): Use separate alternatives for
	'0' matching inputs.
	(subv64di3_exec): Likewise.

2020-01-06  Bryan Stenson  <bryan@siliconvortex.com>

	* config/mips/mips.c (vr4130_align_insns): Fix typo.
	* doc/md.texi (movstr): Likewise.

2020-01-06  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-valu.md (vec_extract<mode><scalar_mode>): Add early
	clobber.

2020-01-06  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/t-aarch64 ($(srcdir)/config/aarch64/aarch64-tune.md):
	Depend on...
	(s-aarch64-tune-md): ...this new stamp file.  Pipe the new contents
	to a temporary file and use move-if-change to update the real
	file where necessary.

2020-01-06  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve.md (@aarch64_sel_dup<mode>): Use Upl
	rather than Upa for CPY /M.

2020-01-06  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn.c (gcn_inline_constant_p): Allow 64 as an inline
	immediate.

2020-01-06  Martin Liska  <mliska@suse.cz>

    PR tree-optimization/92860
    * params.opt: Mark param_max_combine_insns with Optimization
    keyword. 

2020-01-05  Jakub Jelinek  <jakub@redhat.com>

	PR target/93141
	* config/i386/i386.md (SWIDWI): New mode iterator.
	(DWI, dwi): Add TImode variants.
	(addv<mode>4): Use SWIDWI iterator instead of SWI.  Use
	<general_hilo_operand> instead of <general_operand>.  Use
	CONST_SCALAR_INT_P instead of CONST_INT_P.
	(*addv<mode>4_1): Rename to ...
	(addv<mode>4_1): ... this.
	(QWI): New mode attribute.
	(*addv<dwi>4_doubleword, *addv<dwi>4_doubleword_1): New
	define_insn_and_split patterns.
	(*addv<mode>4_overflow_1, *addv<mode>4_overflow_2): New define_insn
	patterns.
	(uaddv<mode>4): Use SWIDWI iterator instead of SWI.  Use
	<general_hilo_operand> instead of <general_operand>.
	(*addcarry<mode>_1): New define_insn.
	(*add<dwi>3_doubleword_cc_overflow_1): New define_insn_and_split.

2020-01-03  Konstantin Kharlamov  <Hi-Angel@yandex.ru>

	* gdbinit.in (pr, prl, pt, pct, pgg, pgq, pgs, pge, pmz, pdd, pbs, pbm):
	Use "call" instead of "set".

2020-01-03  Martin Jambor  <mjambor@suse.cz>

	PR ipa/92917
	* ipa-cp.c (print_all_lattices): Skip functions without info.

2020-01-03  Jakub Jelinek  <jakub@redhat.com>

	PR target/93089
	* config/i386/i386-options.c (ix86_simd_clone_adjust): If
	TARGET_PREFER_AVX128, use prefer-vector-width=256 for 'c' and 'd'
	simd clones.  If TARGET_PREFER_AVX256, use prefer-vector-width=512
	for 'e' simd clones.

	PR target/93089
	* config/i386/i386.opt (x_prefer_vector_width_type): Remove TargetSave
	entry.
	(mprefer-vector-width=): Add Save.
	* config/i386/i386-options.c (ix86_target_string): Add PVW argument, print
	-mprefer-vector-width= if non-zero.  Fix up -mfpmath= comment.
	(ix86_debug_options, ix86_function_specific_print): Adjust
	ix86_target_string callers.
	(ix86_valid_target_attribute_inner_p): Handle prefer-vector-width=.
	(ix86_valid_target_attribute_tree): Likewise.
	* config/i386/i386-options.h (ix86_target_string): Add PVW argument.
	* config/i386/i386-expand.c (ix86_expand_builtin): Adjust
	ix86_target_string caller.

	PR target/93110
	* config/i386/i386.md (abs<mode>2): Use expand_simple_binop instead of
	emitting ASHIFTRT, XOR and MINUS by hand.  Use gen_int_mode with QImode
	instead of gen_int_shift_amount + convert_modes.

	PR rtl-optimization/93088
	* loop-iv.c (find_single_def_src): Punt after looking through
	128 reg copies for regs with single definitions.  Move definitions
	to first uses.

2020-01-02  Dennis Zhang  <dennis.zhang@arm.com>

	* config/arm/arm-c.c (arm_cpu_builtins): Define
	__ARM_FEATURE_MATMUL_INT8, __ARM_FEATURE_BF16_VECTOR_ARITHMETIC,
	__ARM_FEATURE_BF16_SCALAR_ARITHMETIC, and
	__ARM_BF16_FORMAT_ALTERNATIVE when enabled.
	* config/arm/arm-cpus.in (armv8_6, i8mm, bf16): New features.
	* config/arm/arm-tables.opt: Regenerated.
	* config/arm/arm.c (arm_option_reconfigure_globals): Initialize
	arm_arch_i8mm and arm_arch_bf16 when enabled.
	* config/arm/arm.h (TARGET_I8MM): New macro.
	(TARGET_BF16_FP, TARGET_BF16_SIMD): Likewise.
	* config/arm/t-aprofile: Add matching rules for -march=armv8.6-a.
	* config/arm/t-arm-elf (all_v8_archs): Add armv8.6-a.
	* config/arm/t-multilib: Add matching rules for -march=armv8.6-a.
	(v8_6_a_simd_variants): New.
	(v8_*_a_simd_variants): Add i8mm and bf16.
	* doc/invoke.texi (armv8.6-a, i8mm, bf16): Document new options.

2020-01-02  Jakub Jelinek  <jakub@redhat.com>

	PR ipa/93087
	* predict.c (compute_function_frequency): Don't call
	warn_function_cold on functions that already have cold attribute.

2020-01-01  John David Anglin  <danglin@gcc.gnu.org>

	PR target/67834
	* config/pa/pa.c (pa_elf_select_rtx_section): New.  Put references to
	COMDAT group function labels in .data.rel.ro.local section.
	* config/pa/pa32-linux.h (TARGET_ASM_SELECT_RTX_SECTION): Define.

	PR target/93111
	* config/pa/pa.md (scc): Use ordered_comparison_operator instead of
	comparison_operator in B and S integer comparisons.  Likewise, use
	ordered_comparison_operator instead of cmpib_comparison_operator in
	cmpib patterns.
	* config/pa/predicates.md (cmpib_comparison_operator): Remove.

2020-01-01  Jakub Jelinek  <jakub@redhat.com>

	Update copyright years.

	* gcc.c (process_command): Update copyright notice dates.
	* gcov-dump.c (print_version): Ditto.
	* gcov.c (print_version): Ditto.
	* gcov-tool.c (print_version): Ditto.
	* gengtype.c (create_file): Ditto.
	* doc/cpp.texi: Bump @copying's copyright year.
	* doc/cppinternals.texi: Ditto.
	* doc/gcc.texi: Ditto.
	* doc/gccint.texi: Ditto.
	* doc/gcov.texi: Ditto.
	* doc/install.texi: Ditto.
	* doc/invoke.texi: Ditto.

2020-01-01  Jan Hubicka  <hubicka@ucw.cz>

	* ipa.c (walk_polymorphic_call_targets): Fix updating of overall
	summary.

2020-01-01  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/93098
	* match.pd (popcount): For shift amounts, use integer_onep
	or wi::to_widest () == cst instead of tree_to_uhwi () == cst
	tests.  Make sure that precision is power of two larger than or equal
	to 16.  Ensure shift is never negative.  Use HOST_WIDE_INT_UC macro
	instead of ULL suffixed constants.  Formatting fixes.

Copyright (C) 2020 Free Software Foundation, Inc.

Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved.
