2018-01-23  Andrew Waterman  <andrew@sifive.com>
	    Jim Wilson  <jimw@sifive.com>

	* config/riscv/riscv.c (riscv_stack_boundary): New.
	(riscv_option_override): Set riscv_stack_boundary.  Handle
	riscv_preferred_stack_boundary_arg.
	* config/riscv/riscv.h (MIN_STACK_BOUNDARY, ABI_STACK_BOUNDARY): New.
	(BIGGEST_ALIGNMENT): Set to STACK_BOUNDARY.
	(STACK_BOUNDARY): Set to riscv_stack_boundary.
	(RISCV_STACK_ALIGN): Use STACK_BOUNDARY.
	* config/riscv/riscv.opt (mpreferred-stack-boundary): New.
	* doc/invoke.tex (RISC-V Options): Add -mpreferred-stack-boundary.

2018-01-23  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/83905
	* config/i386/i386.c (ix86_expand_prologue): Use cost reference
	of struct ix86_frame.
	(ix86_expand_epilogue): Likewise.  Add a local variable for
	the reg_save_offset field in struct ix86_frame.

2018-01-23  Bin Cheng  <bin.cheng@arm.com>

	PR tree-optimization/82604
	* tree-loop-distribution.c (enum partition_kind): New enum item
	PKIND_PARTIAL_MEMSET.
	(partition_builtin_p): Support above new enum item.
	(generate_code_for_partition): Ditto.
	(compute_access_range): Differentiate cases that equality can be
	proven at all loops, the innermost loops or no loops.
	(classify_builtin_st, classify_builtin_ldst): Adjust call to above
	function.  Set PKIND_PARTIAL_MEMSET for partition appropriately.
	(finalize_partitions, distribute_loop): Don't fuse partition of
	PKIND_PARTIAL_MEMSET kind when distributing 3-level loop nest.
	(prepare_perfect_loop_nest): Distribute 3-level loop nest only if
	parloop is enabled.

2018-01-23  Martin Liska  <mliska@suse.cz>

	* predict.def (PRED_INDIR_CALL): Set probability to PROB_EVEN in
	order to ignore the predictor.
	(PRED_POLYMORPHIC_CALL): Likewise.
	(PRED_RECURSIVE_CALL): Likewise.

2018-01-23  Martin Liska  <mliska@suse.cz>

	* tree-profile.c (tree_profiling): Print function header to
	aware reader which function we are working on.
	* value-prof.c (gimple_find_values_to_profile): Do not print
	not interesting value histograms.

2018-01-23  Martin Liska  <mliska@suse.cz>

	* profile-count.h (enum profile_quality): Add
	profile_uninitialized as the first value. Do not number values
	as they are zero based.
	(profile_count::verify): Update sanity check.
	(profile_probability::verify): Likewise.

2018-01-23  Nathan Sidwell  <nathan@acm.org>

	* doc/invoke.texi (ffor-scope): Deprecate.

2018-01-23  David Malcolm  <dmalcolm@redhat.com>

	PR tree-optimization/83510
	* domwalk.c (set_all_edges_as_executable): New function.
	(dom_walker::dom_walker): Convert bool param
	"skip_unreachable_blocks" to enum reachability.  Move setup of
	edge flags to set_all_edges_as_executable and only do it when
	reachability is REACHABLE_BLOCKS.
	* domwalk.h (enum dom_walker::reachability): New enum.
	(dom_walker::dom_walker): Convert bool param
	"skip_unreachable_blocks" to enum reachability.
	(set_all_edges_as_executable): New decl.
	* graphite-scop-detection.c  (gather_bbs::gather_bbs): Convert
	from false for "skip_unreachable_blocks" to ALL_BLOCKS for
	"reachability".
	* tree-ssa-dom.c (dom_opt_dom_walker::dom_opt_dom_walker): Likewise,
	but converting true to REACHABLE_BLOCKS.
	* tree-ssa-sccvn.c (sccvn_dom_walker::sccvn_dom_walker): Likewise.
	* tree-vrp.c
	(check_array_bounds_dom_walker::check_array_bounds_dom_walker):
	Likewise, but converting it to REACHABLE_BLOCKS_PRESERVING_FLAGS.
	(vrp_dom_walker::vrp_dom_walker): Likewise, but converting it to
	REACHABLE_BLOCKS.
	(vrp_prop::vrp_finalize): Call set_all_edges_as_executable
	if check_all_array_refs will be called.

2018-01-23  David Malcolm  <dmalcolm@redhat.com>

	* tree.c (selftest::test_location_wrappers): Add more test
	coverage.

2018-01-23  David Malcolm  <dmalcolm@redhat.com>

	* sbitmap.c (selftest::test_set_range): Fix memory leaks.
	(selftest::test_bit_in_range): Likewise.

2018-01-23  Richard Sandiford  <richard.sandiford@linaro.org>

	PR testsuite/83888
	* doc/sourcebuild.texi (vect_float): Say that the selector
	only describes the situation when -funsafe-math-optimizations is on.
	(vect_float_strict): Document.

2018-01-23  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/83965
	* tree-vect-patterns.c (vect_reassociating_reduction_p): New function.
	(vect_recog_dot_prod_pattern, vect_recog_sad_pattern): Use it
	instead of checking only for a reduction.
	(vect_recog_widen_sum_pattern): Likewise.

2018-01-23  Jan Hubicka  <hubicka@ucw.cz>

	* predict.c (probably_never_executed): Only use precise profile info.
	(compute_function_frequency): Skip after inlining hack since we now
	have quality checking.

2018-01-23  Jan Hubicka  <hubicka@ucw.cz>

	* profile-count.h (profile_probability::very_unlikely,
	profile_probability::unlikely, profile_probability::even): Set
	precision to guessed.

2018-01-23  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/83963
	* graphite-scop-detection.c (scop_detection::harmful_loop_in_region):
	Properly terminate dominator walk when crossing the exit edge not
	when visiting its source block.

2018-01-23  Jakub Jelinek  <jakub@redhat.com>

	PR c++/83918
	* tree.c (maybe_wrap_with_location): Use NON_LVALUE_EXPR rather than
	VIEW_CONVERT_EXPR to wrap CONST_DECLs.

2018-01-22  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/83957
	* omp-expand.c (expand_omp_for_generic): Ignore virtual PHIs.  Remove
	semicolon after for body surrounded by braces.

	PR tree-optimization/83081
	* profile-count.h (profile_probability::split): New method.
	* dojump.c (do_jump_1) <case TRUTH_ANDIF_EXPR, case TRUTH_ORIF_EXPR>:
	Use profile_probability::split.
	(do_compare_rtx_and_jump): Fix adjustment of probabilities
	when splitting a single conditional jump into 2.

2018-01-22  David Malcolm  <dmalcolm@redhat.com>

	PR tree-optimization/69452
	* tree-ssa-loop-im.c (class move_computations_dom_walker): Remove
	decl.

2018-01-22  Sebastian Perta  <sebastian.perta@renesas.com>

	* config/rl78/rl78-expand.md: New define_expand "bswaphi2"
	* config/rl78/rl78-virt.md: New define_insn "*bswaphi2_virt"
	* config/rl78/rl78-real.md: New define_insn "*bswaphi2_real"

2018-01-22  Sebastian Perta  <sebastian.perta@renesas.com>

	* config/rl78/rl78-protos.h: New function declaration rl78_split_movdi
	* config/rl78/rl78.md: New define_expand "movdi"
	* config/rl78/rl78.c: New function definition rl78_split_movdi

2018-01-22  Michael Meissner  <meissner@linux.vnet.ibm.com>

	PR target/83862
	* config/rs6000/rs6000-protos.h (rs6000_split_signbit): Delete,
	no longer used.
	* config/rs6000/rs6000.c (rs6000_split_signbit): Likewise.
	* config/rs6000/rs6000.md (signbit<mode>2): Change code for IEEE
	128-bit to produce an UNSPEC move to get the double word with the
	signbit and then a shift directly to do signbit.
	(signbit<mode>2_dm): Replace old IEEE 128-bit signbit
	implementation with a new version that just does either a direct
	move or a regular move.  Move memory interface to separate insns.
	Move insns so they are next to the expander.
	(signbit<mode>2_dm_mem_be): New combiner insns to combine load
	with signbit move.  Split big and little endian case.
	(signbit<mode>2_dm_mem_le): Likewise.
	(signbit<mode>2_dm_<su>ext): Delete, no longer used.
	(signbit<mode>2_dm2): Likewise.

2018-01-22  Sebastian Perta  <sebastian.perta@renesas.com>

	* config/rl78/rl78.md: New define_expand "anddi3".

2018-01-22  Sebastian Perta  <sebastian.perta@renesas.com>

	* config/rl78/rl78.md: New define_expand "umindi3".

2018-01-22  Sebastian Perta  <sebastian.perta@renesas.com>

	* config/rl78/rl78.md: New define_expand "smindi3".

2018-01-22  Sebastian Perta  <sebastian.perta@renesas.com>

	* config/rl78/rl78.md: New define_expand "smaxdi3".

2018-01-22 Carl Love <cel@us.ibm.com>

	* config/rs6000/rs6000-builtin.def (ST_ELEMREV_V1TI, LD_ELEMREV_V1TI,
	LVX_V1TI): Add macro expansion.
	* config/rs6000/rs6000-c.c (altivec_builtin_types): Add argument
	definitions for VSX_BUILTIN_VEC_XST_BE, VSX_BUILTIN_VEC_ST,
	VSX_BUILTIN_VEC_XL, LD_ELEMREV_V1TI builtins.
	* config/rs6000/rs6000-p8swap.c (insn_is_swappable_p);
	Change check to determine if the instruction is a byte reversing
	entry.  Fix typo in comment.
	* config/rs6000/rs6000.c (altivec_expand_builtin): Add case entry
	for VSX_BUILTIN_ST_ELEMREV_V1TI and VSX_BUILTIN_LD_ELEMREV_V1TI.
	Add def_builtin calls for new builtins.
	* config/rs6000/vsx.md (vsx_st_elemrev_v1ti, vsx_ld_elemrev_v1ti):
	Add define_insn expansion.

2018-01-22  Sebastian Perta  <sebastian.perta@renesas.com>

	* config/rl78/rl78.md: New define_expand "umaxdi3".

2018-01-22  Sebastian Perta  <sebastian.perta@renesas.com>
	
	* config/rl78/rl78.c (rl78_note_reg_set): fixed dead reg check 
	for non-QImode registers

2018-01-22  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/83963
	* graphite-scop-detection.c (scop_detection::get_sese): Delay
	including the loop exit block.
	(scop_detection::merge_sese): Likewise.
	(scop_detection::add_scop): Do it here instead.

2018-01-22  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* doc/sourcebuild.texi (arm_softfloat): Document.

2018-01-21  John David Anglin  <danglin@gcc.gnu.org>

	PR gcc/77734
	* config/pa/pa.c (pa_function_ok_for_sibcall): Use
	targetm.binds_local_p instead of TREE_PUBLIC to check local binding.
	Move TARGET_PORTABLE_RUNTIME check after TARGET_64BIT check.

2018-01-21  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>
	    David Edelsohn <dje.gcc@gmail.com>

	PR target/83946
	* config/rs6000/rs6000.md (*call_indirect_nonlocal_sysv<mode>):
	Change "crset eq" to "crset 2".
	(*call_value_indirect_nonlocal_sysv<mode>): Likewise.
	(*call_indirect_aix<mode>_nospec): Likewise.
	(*call_value_indirect_aix<mode>_nospec): Likewise.
	(*call_indirect_elfv2<mode>_nospec): Likewise.
	(*call_value_indirect_elfv2<mode>_nospec): Likewise.
	(*sibcall_nonlocal_sysv<mode>): Change "crset eq" to "crset 2";
	change assembly output from . to $.
	(*sibcall_value_nonlocal_sysv<mode>): Likewise.
	(indirect_jump<mode>_nospec): Change assembly output from . to $.
	(*tablejump<mode>_internal1_nospec): Likewise.

2018-01-21  Oleg Endo  <olegendo@gcc.gnu.org>

	PR target/80870
	* config/sh/sh_optimize_sett_clrt.cc:
	Use INCLUDE_ALGORITHM and INCLUDE_VECTOR instead of direct includes.

2018-01-20  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/83940
	* tree-vect-stmts.c (vect_truncate_gather_scatter_offset): Set
	offset_dt to vect_constant_def rather than vect_unknown_def_type.
	(vect_check_load_store_mask): Add a mask_dt_out parameter and
	use it to pass back the definition type.
	(vect_check_store_rhs): Likewise rhs_dt_out.
	(vect_build_gather_load_calls): Add a mask_dt argument and use
	it instead of a call to vect_is_simple_use.
	(vectorizable_store): Update calls to vect_check_load_store_mask
	and vect_check_store_rhs.  Use the dt returned by the latter instead
	of scatter_src_dt.  Use the cached mask_dt and gs_info.offset_dt
	instead of calls to vect_is_simple_use.  Pass the scalar rather
	than the vector operand to vect_is_simple_use when handling
	second and subsequent copies of an rhs value.
	(vectorizable_load): Update calls to vect_check_load_store_mask
	and vect_build_gather_load_calls.  Use the cached mask_dt and
	gs_info.offset_dt instead of calls to vect_is_simple_use.

2018-01-20  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/83945
	* tree-emutls.c: Include gimplify.h.
	(lower_emutls_2): New function.
	(lower_emutls_1): If ADDR_EXPR is a gimple invariant and walk_tree
	with lower_emutls_2 callback finds some TLS decl in it, unshare_expr
	it before further processing.

	PR target/83930
	* simplify-rtx.c (simplify_binary_operation_1) <case UMOD>: Use
	UINTVAL (trueop1) instead of INTVAL (op1).

2018-01-19  Jakub Jelinek  <jakub@redhat.com>

	PR debug/81570
	PR debug/83728
	* dwarf2cfi.c (DEFAULT_INCOMING_FRAME_SP_OFFSET): Define to
	INCOMING_FRAME_SP_OFFSET if not defined.
	(scan_trace): Add ENTRY argument.  If true and
	DEFAULT_INCOMING_FRAME_SP_OFFSET != INCOMING_FRAME_SP_OFFSET,
	emit a note to adjust the CFA offset.
	(create_cfi_notes): Adjust scan_trace callers.
	(create_cie_data): Use DEFAULT_INCOMING_FRAME_SP_OFFSET rather than
	INCOMING_FRAME_SP_OFFSET in the CIE.
	* config/i386/i386.h (DEFAULT_INCOMING_FRAME_SP_OFFSET): Define.
	* config/stormy16/stormy16.h (DEFAULT_INCOMING_FRAME_SP_OFFSET):
	Likewise.
	* doc/tm.texi.in (DEFAULT_INCOMING_FRAME_SP_OFFSET): Document.
	* doc/tm.texi: Regenerated.

2018-01-19  Andreas Krebbel  <krebbel@linux.vnet.ibm.com>

	PR rtl-optimization/83147
	* lra-constraints.c (remove_inheritance_pseudos): Use
	lra_substitute_pseudo_within_insn.

2018-01-19  Tom de Vries  <tom@codesourcery.com>
	    Cesar Philippidis  <cesar@codesourcery.com>

	PR target/83920
	* config/nvptx/nvptx.c (nvptx_single): Fix jit workaround.

2018-01-19  Cesar Philippidis  <cesar@codesourcery.com>

	PR target/83790
	* config/nvptx/nvptx.c (output_init_frag): Don't use generic address
	spaces for function labels.

2018-01-19  Martin Liska  <mliska@suse.cz>

	* predict.def (PRED_LOOP_EXIT): Change from 85 to 89.
	(PRED_LOOP_EXIT_WITH_RECURSION): Change from 72 to 78.
	(PRED_LOOP_EXTRA_EXIT): Change from 83 to 67.
	(PRED_OPCODE_POSITIVE): Change from 64 to 59.
	(PRED_TREE_OPCODE_POSITIVE): Change from 64 to 59.
	(PRED_CONST_RETURN): Change from 69 to 65.
	(PRED_NULL_RETURN): Change from 91 to 71.
	(PRED_LOOP_IV_COMPARE_GUESS): Change from 98 to 64.
	(PRED_LOOP_GUARD): Change from 66 to 73.

2018-01-19  Martin Liska  <mliska@suse.cz>

	* predict.c (predict_insn_def): Add new assert.
	(struct branch_predictor): Change type to signed integer.
	(test_prediction_value_range): Amend test to cover
	PROB_UNINITIALIZED.
	* predict.def (PRED_LOOP_ITERATIONS): Use the new constant.
	(PRED_LOOP_ITERATIONS_GUESSED): Likewise.
	(PRED_LOOP_ITERATIONS_MAX): Likewise.
	(PRED_LOOP_IV_COMPARE): Likewise.
	* predict.h (PROB_UNINITIALIZED): Define new constant.

2018-01-19  Martin Liska  <mliska@suse.cz>

	* predict.c (dump_prediction): Add new format for
	analyze_brprob.py script which is enabled with -details
	suboption.
	* profile-count.h (precise_p): New function.

2018-01-19  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/83922
	* tree-vect-loop.c (vect_verify_full_masking): Return false if
	there are no statements that need masking.
	(vect_active_double_reduction_p): New function.
	(vect_analyze_loop_operations): Use it when handling phis that
	are not in the loop header.

2018-01-19  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/83914
	* tree-vect-loop.c (vectorizable_induction): Don't convert
	init_expr or apply the peeling adjustment for inductions
	that are nested within the vectorized loop.

2018-01-19  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/arm/thumb2.md (*thumb2_negsi2_short): Use RSB mnemonic
	instead of NEG.

2018-01-18  Jakub Jelinek  <jakub@redhat.com>

	PR sanitizer/81715
	PR testsuite/83882
	* function.h (gimplify_parameters): Add gimple_seq * argument.
	* function.c: Include gimple.h and options.h.
	(gimplify_parameters): Add cleanup argument, add CLOBBER stmts
	for the added local temporaries if needed.
	* gimplify.c (gimplify_body): Adjust gimplify_parameters caller,
	if there are any parameter cleanups, wrap whole body into a
	try/finally with the cleanups.

2018-01-18  Wilco Dijkstra  <wdijkstr@arm.com>

	PR target/82964
	* config/aarch64/aarch64.c (aarch64_legitimate_constant_p):
	Use GET_MODE_CLASS for scalar floating point.

2018-01-18  Jan Hubicka  <hubicka@ucw.cz>

	PR ipa/82256
	patch by PaX Team
	* cgraphclones.c (cgraph_node::create_version_clone_with_body):
	Fix call of call_cgraph_insertion_hooks.

2018-01-18  Martin Sebor  <msebor@redhat.com>

	* doc/invoke.texi (-Wclass-memaccess): Tweak text.

2018-01-18  Jan Hubicka  <hubicka@ucw.cz>

	PR ipa/83619
	* cgraph.c (cgraph_edge::redirect_call_stmt_to_callee): Update edge
	frequencies.

2018-01-18  Boris Kolpackov  <boris@codesynthesis.com>

        PR other/70268
        * common.opt: (-ffile-prefix-map): New option.
        * opts.c (common_handle_option): Defer it.
        * opts-global.c (handle_common_deferred_options): Handle it.
        * debug.h (remap_debug_filename, add_debug_prefix_map): Move to...
        * file-prefix-map.h: New file.
        (remap_debug_filename, add_debug_prefix_map): ...here.
        (add_macro_prefix_map, add_file_prefix_map, remap_macro_filename): New.
        * final.c (debug_prefix_map, add_debug_prefix_map
        remap_debug_filename): Move to...
        * file-prefix-map.c: New file.
        (file_prefix_map, add_prefix_map, remap_filename) ...here and rename,
        generalize, get rid of alloca(), use strrchr() instead of strchr().
        (add_macro_prefix_map, add_debug_prefix_map, add_file_prefix_map):
        Implement in terms of add_prefix_map().
        (remap_macro_filename, remap_debug_filename): Implement in term of
        remap_filename().
        * Makefile.in (OBJS, PLUGIN_HEADERS): Add new files.
        * builtins.c (fold_builtin_FILE): Call remap_macro_filename().
        * dbxout.c: Include file-prefix-map.h.
        * varasm.c: Likewise.
        * vmsdbgout.c: Likewise.
        * xcoffout.c: Likewise.
        * dwarf2out.c: Likewise plus omit new options from DW_AT_producer.
        * doc/cppopts.texi (-fmacro-prefix-map): Document.
        * doc/invoke.texi (-ffile-prefix-map): Document.
	(-fdebug-prefix-map): Update description.

2018-01-18  Martin Liska  <mliska@suse.cz>

	* config/i386/i386.c (indirect_thunk_name): Document that also
	lfence is emitted.
	(output_indirect_thunk): Document why both instructions
	(pause and lfence) are generated.

2018-01-18  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/83887
	* graphite-scop-detection.c
	(scop_detection::get_nearest_dom_with_single_entry): Remove.
	(scop_detection::get_nearest_pdom_with_single_exit): Likewise.
	(scop_detection::merge_sese): Re-implement with a flood-fill
	algorithm that properly finds a SESE region if it exists.

2018-01-18  Jakub Jelinek  <jakub@redhat.com>

	PR c/61240
	* match.pd ((P + A) - P, P - (P + A), (P + A) - (P + B)): For
	pointer_diff optimizations use view_convert instead of convert.

2018-01-17  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

	* config/rs6000/rs6000.md (*call_indirect_nonlocal_sysv<mode>):
	Generate different code for -mno-speculate-indirect-jumps.
	(*call_value_indirect_nonlocal_sysv<mode>): Likewise.
	(*call_indirect_aix<mode>): Disable for
	-mno-speculate-indirect-jumps.
	(*call_indirect_aix<mode>_nospec): New define_insn.
	(*call_value_indirect_aix<mode>): Disable for
	-mno-speculate-indirect-jumps.
	(*call_value_indirect_aix<mode>_nospec): New define_insn.
	(*sibcall_nonlocal_sysv<mode>): Generate different code for
	-mno-speculate-indirect-jumps.
	(*sibcall_value_nonlocal_sysv<mode>): Likewise.

2018-01-17  Michael Meissner  <meissner@linux.vnet.ibm.com>

	* config/rs6000/rs6000.c (rs6000_emit_move): If we load or store a
	long double type, set the flags for noting the default long double
	type, even if we don't pass or return a long double type.

2018-01-17  Jan Hubicka  <hubicka@ucw.cz>

	PR ipa/83051
	* ipa-inline.c (flatten_function): Do not overwrite final inlining
	failure.

2018-01-17  Will Schmidt  <will_schmidt@vnet.ibm.com>

	* config/rs6000/rs6000.c (rs6000_gimple_builtin): Add gimple folding
	support for merge[hl].
	(fold_mergehl_helper): New helper function.
	(tree-vector-builder.h): New #include for tree_vector_builder usage.
	* config/rs6000/altivec.md (altivec_vmrghw_direct): Add xxmrghw insn.
	(altivec_vmrglw_direct): Add xxmrglw insn.

2018-01-17  Andrew Waterman  <andrew@sifive.com>

	* config/riscv/riscv.c (riscv_conditional_register_usage): If
	UNITS_PER_FP_ARG is 0, set call_used_regs to 1 for all FP regs.

2018-01-17  David Malcolm  <dmalcolm@redhat.com>

	PR lto/83121
	* ipa-devirt.c (add_type_duplicate): When comparing memory layout,
	call the lto_location_cache before reading the
	DECL_SOURCE_LOCATION of the types.

2018-01-17  Wilco Dijkstra  <wdijkstr@arm.com>
	    Richard Sandiford  <richard.sandiford@linaro.org>

	* config/aarch64/aarch64.md (movti_aarch64): Use Uti constraint.
	* config/aarch64/aarch64.c (aarch64_mov128_immediate): New function.
	(aarch64_legitimate_constant_p): Just support CONST_DOUBLE
	SF/DF/TF mode to avoid creating illegal CONST_WIDE_INT immediates.
	* config/aarch64/aarch64-protos.h (aarch64_mov128_immediate):
	Add declaration.
	* config/aarch64/constraints.md (aarch64_movti_operand):
	Limit immediates.
	* config/aarch64/predicates.md (Uti): Add new constraint.

2018-01-17 Carl Love  <cel@us.ibm.com>
	* config/rs6000/vsx.md (define_expand xl_len_r,
	define_expand stxvl, define_expand *stxvl): Add match_dup argument.
	(define_insn): Add, match_dup 1 argument to define_insn stxvll and
	lxvll.
	(define_expand, define_insn): Move the shift left from	the
	define_insn to the define_expand for lxvl and stxvl instructions.
	* config/rs6000/rs6000-builtin.def (BU_P9V_64BIT_VSX_2): Change LXVL
	and XL_LEN_R definitions to PURE.

2018-01-17  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.c (indirect_thunk_name): Declare regno
	as unsigned int.  Compare regno with INVALID_REGNUM.
	(output_indirect_thunk): Ditto.
	(output_indirect_thunk_function): Ditto.
	(ix86_code_end): Declare regno as unsigned int.  Use INVALID_REGNUM
	in the call to output_indirect_thunk_function.

2018-01-17  Richard Sandiford  <richard.sandiford@linaro.org>

	PR middle-end/83884
	* expr.c (expand_expr_real_1): Use the size of GET_MODE (op0)
	rather than the size of inner_type to determine the stack slot size
	when handling VIEW_CONVERT_EXPRs on strict-alignment targets.

2018-01-16  Sebastian Peryt  <sebastian.peryt@intel.com>

	PR target/83546
	* config/i386/i386.c (ix86_option_override_internal): Add PTA_RDRND
	to PTA_SILVERMONT.

2018-01-16  Michael Meissner  <meissner@linux.vnet.ibm.com>

	* config.gcc (powerpc*-linux*-*): Add support for 64-bit little
	endian Linux systems to optionally enable multilibs for selecting
	the long double type if the user configured an explicit type.
	* config/rs6000/rs6000.h (TARGET_IEEEQUAD_MULTILIB): Indicate we
	have no long double multilibs if not defined.
	* config/rs6000/rs6000.c (rs6000_option_override_internal): Do not
	warn if the user used -mabi={ieee,ibm}longdouble and we built
	multilibs for long double.
	* config/rs6000/linux64.h (MULTILIB_DEFAULTS_IEEE): Define as the
	appropriate multilib option.
	(MULTILIB_DEFAULTS): Add MULTILIB_DEFAULTS_IEEE to the default
	multilib options.
	* config/rs6000/t-ldouble-linux64le-ibm: New configuration files
	for building long double multilibs.
	* config/rs6000/t-ldouble-linux64le-ieee: Likewise.

2018-01-16  John David Anglin  <danglin@gcc.gnu.org>

	* config.gcc (hppa*-*-linux*): Change callee copies ABI to caller
	copies.

	* config/pa.h (MALLOC_ABI_ALIGNMENT): Set 32-bit alignment default to
	64 bits.
	* config/pa/pa32-linux.h (MALLOC_ABI_ALIGNMENT): Set alignment to
	128 bits.

	* config/pa/som.h (ASM_DECLARE_FUNCTION_NAME): Cleanup type and mode
	variables.

	* config/pa/pa.c (pa_function_arg_size): Apply CEIL to GET_MODE_SIZE
	return value.

2018-01-16  Eric Botcazou  <ebotcazou@adacore.com>

	* gimple-ssa-warn-restrict.c (builtin_memref::builtin_memref): For an
	ADDR_EXPR, do not count the offset of a COMPONENT_REF twice.

2018-01-16  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	* config/rs6000/rs6000-p8swap.c (rs6000_gen_stvx): Generate
	different rtl trees depending on TARGET_64BIT.
	(rs6000_gen_lvx): Likewise.

2018-01-16  Eric Botcazou  <ebotcazou@adacore.com>

	* config/visium/visium.md (nop): Tweak comment.
	(hazard_nop): Likewise.

2018-01-16  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

	* config/rs6000/rs6000.c (rs6000_opt_vars): Add entry for
	-mspeculate-indirect-jumps.
	* config/rs6000/rs6000.md (*call_indirect_elfv2<mode>): Disable
	for -mno-speculate-indirect-jumps.
	(*call_indirect_elfv2<mode>_nospec): New define_insn.
	(*call_value_indirect_elfv2<mode>): Disable for
	-mno-speculate-indirect-jumps.
	(*call_value_indirect_elfv2<mode>_nospec): New define_insn.
	(indirect_jump): Emit different RTL for
	-mno-speculate-indirect-jumps.
	(*indirect_jump<mode>): Disable for
	-mno-speculate-indirect-jumps.
	(*indirect_jump<mode>_nospec): New define_insn.
	(tablejump): Emit different RTL for
	-mno-speculate-indirect-jumps.
	(tablejumpsi): Disable for -mno-speculate-indirect-jumps.
	(tablejumpsi_nospec): New define_expand.
	(tablejumpdi): Disable for -mno-speculate-indirect-jumps.
	(tablejumpdi_nospec): New define_expand.
	(*tablejump<mode>_internal1): Disable for
	-mno-speculate-indirect-jumps.
	(*tablejump<mode>_internal1_nospec): New define_insn.
	* config/rs6000/rs6000.opt (mspeculate-indirect-jumps): New
	option.

2018-01-16  Artyom Skrobov tyomitch@gmail.com

        * caller-save.c (insert_save): Drop unnecessary parameter.  All
	callers updated.

2018-01-16  Jakub Jelinek  <jakub@redhat.com>
	    Richard Biener  <rguenth@suse.de>

	PR libgomp/83590
	* gimplify.c (gimplify_one_sizepos): For is_gimple_constant (expr)
	return early, inline manually is_gimple_sizepos.  Make sure if we
	call gimplify_expr we don't end up with a gimple constant.
	* tree.c (variably_modified_type_p): Don't return true for
	is_gimple_constant (_t).  Inline manually is_gimple_sizepos.
	* gimplify.h (is_gimple_sizepos): Remove.

2018-01-16  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/83857
	* tree-vect-loop.c (vect_analyze_loop_operations): Don't call
	vectorizable_live_operation for pure SLP statements.
	(vectorizable_live_operation): Handle PHIs.

2018-01-16  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/83867
	* tree-vect-stmts.c (vect_transform_stmt): Precompute
	nested_in_vect_loop_p since the scalar stmt may get invalidated.

2018-01-16  Jakub Jelinek  <jakub@redhat.com>

	PR c/83844
	* stor-layout.c (handle_warn_if_not_align): Use byte_position and
	multiple_of_p instead of unchecked tree_to_uhwi and UHWI check.
	If off is not INTEGER_CST, issue a may not be aligned warning
	rather than isn't aligned.  Use isn%'t rather than isn't.
	* fold-const.c (multiple_of_p) <case BIT_AND_EXPR>: Don't fall through
	into MULT_EXPR.
	<case MULT_EXPR>: Improve the case when bottom and one of the
	MULT_EXPR operands are INTEGER_CSTs and bottom is multiple of that
	operand, in that case check if the other operand is multiple of
	bottom divided by the INTEGER_CST operand.

2018-01-16  Richard Sandiford  <richard.sandiford@linaro.org>

	PR target/83858
	* config/pa/pa.h (FUNCTION_ARG_SIZE): Delete.
	* config/pa/pa-protos.h (pa_function_arg_size): Declare.
	* config/pa/som.h (ASM_DECLARE_FUNCTION_NAME): Use
	pa_function_arg_size instead of FUNCTION_ARG_SIZE.
	* config/pa/pa.c (pa_function_arg_advance): Likewise.
	(pa_function_arg, pa_arg_partial_bytes): Likewise.
	(pa_function_arg_size): New function.

2018-01-16  Richard Sandiford  <richard.sandiford@linaro.org>

	* fold-const.c (fold_ternary_loc): Construct the vec_perm_indices
	in a separate statement.

2018-01-16  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/83847
	* tree-vect-data-refs.c (vect_analyze_data_ref_accesses): Don't
	group gathers and scatters.

2018-01-16  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/86620
	* params.def (max-sched-ready-insns): Bump minimum value to 1.

	PR rtl-optimization/83213
	* recog.c (peep2_attempt): Copy over CROSSING_JUMP_P from peepinsn
	to last if both are JUMP_INSNs.

	PR tree-optimization/83843
	* gimple-ssa-store-merging.c
	(imm_store_chain_info::output_merged_store): Handle bit_not_p on
	store_immediate_info for bswap/nop orig_stores.

2018-01-15  Andrew Waterman  <andrew@sifive.com>

	* config/riscv/riscv.c (riscv_rtx_costs) <MULT>: Increase cost if
	!TARGET_MUL.
	<UDIV>: Increase cost if !TARGET_DIV.

2018-01-15  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (define_attr "type"): Remove delayed_cr.
	(define_attr "cr_logical_3op"): New.
	(cceq_ior_compare): Adjust.
	(cceq_ior_compare_complement): Adjust.
	(*cceq_rev_compare): Adjust.
	* config/rs6000/rs6000.c (rs6000_adjust_cost): Adjust.
	(is_cracked_insn): Adjust.
	(insn_must_be_first_in_group): Adjust.
	* config/rs6000/40x.md: Adjust.
	* config/rs6000/440.md: Adjust.
	* config/rs6000/476.md: Adjust.
	* config/rs6000/601.md: Adjust.
	* config/rs6000/603.md: Adjust.
	* config/rs6000/6xx.md: Adjust.
	* config/rs6000/7450.md: Adjust.
	* config/rs6000/7xx.md: Adjust.
	* config/rs6000/8540.md: Adjust.
	* config/rs6000/cell.md: Adjust.
	* config/rs6000/e300c2c3.md: Adjust.
	* config/rs6000/e500mc.md: Adjust.
	* config/rs6000/e500mc64.md: Adjust.
	* config/rs6000/e5500.md: Adjust.
	* config/rs6000/e6500.md: Adjust.
	* config/rs6000/mpc.md: Adjust.
	* config/rs6000/power4.md: Adjust.
	* config/rs6000/power5.md: Adjust.
	* config/rs6000/power6.md: Adjust.
	* config/rs6000/power7.md: Adjust.
	* config/rs6000/power8.md: Adjust.
	* config/rs6000/power9.md: Adjust.
	* config/rs6000/rs64.md: Adjust.
	* config/rs6000/titan.md: Adjust.

2018-01-15  H.J. Lu  <hongjiu.lu@intel.com>

	* config/i386/predicates.md (indirect_branch_operand): Rewrite
	ix86_indirect_branch_register logic.

2018-01-15  H.J. Lu  <hongjiu.lu@intel.com>

	* config/i386/constraints.md (Bs): Update
	ix86_indirect_branch_register check.  Don't check
	ix86_indirect_branch_register with GOT_memory_operand.
	(Bw): Likewise.
	* config/i386/predicates.md (GOT_memory_operand): Don't check
	ix86_indirect_branch_register here.
	(GOT32_symbol_operand): Likewise.

2018-01-15  H.J. Lu  <hongjiu.lu@intel.com>

	* config/i386/predicates.md (constant_call_address_operand):
	Rewrite ix86_indirect_branch_register logic.
	(sibcall_insn_operand): Likewise.

2018-01-15  H.J. Lu  <hongjiu.lu@intel.com>

	* config/i386/constraints.md (Bs): Replace
	ix86_indirect_branch_thunk_register with
	ix86_indirect_branch_register.
	(Bw): Likewise.
	* config/i386/i386.md (indirect_jump): Likewise.
	(tablejump): Likewise.
	(*sibcall_memory): Likewise.
	(*sibcall_value_memory): Likewise.
	Peepholes of indirect call and jump via memory: Likewise.
	* config/i386/i386.opt: Likewise.
	* config/i386/predicates.md (indirect_branch_operand): Likewise.
	(GOT_memory_operand): Likewise.
	(call_insn_operand): Likewise.
	(sibcall_insn_operand): Likewise.
	(GOT32_symbol_operand): Likewise.

2018-01-15  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/83837
	* omp-expand.c (expand_omp_atomic_pipeline): Use loaded_val
	type rather than type addr's type points to.
	(expand_omp_atomic_mutex): Likewise.
	(expand_omp_atomic): Likewise.

2018-01-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/83839
	* config/i386/i386.c (output_indirect_thunk_function): Use
	ASM_OUTPUT_LABEL, instead of ASM_OUTPUT_DEF, for TARGET_MACHO
	for  __x86_return_thunk.

2018-01-15  Richard Biener  <rguenther@suse.de>

	PR middle-end/83850
	* expmed.c (extract_bit_field_1): Fix typo.

2018-01-15  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	PR target/83687
	* config/arm/iterators.md (VF): New mode iterator.
	* config/arm/neon.md (neon_vabd<mode>_2): Use the above.
	Remove integer-related logic from pattern.
	(neon_vabd<mode>_3): Likewise.

2018-01-15  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/82694
	* common.opt (fstrict-overflow): No longer an alias.
	(fwrapv-pointer): New option.
	* tree.h (TYPE_OVERFLOW_WRAPS, TYPE_OVERFLOW_UNDEFINED): Define
	also for pointer types based on flag_wrapv_pointer.
	* opts.c (common_handle_option) <case OPT_fstrict_overflow>: Set
	opts->x_flag_wrap[pv] to !value, clear opts->x_flag_trapv if
	opts->x_flag_wrapv got set.
	* fold-const.c (fold_comparison, fold_binary_loc): Revert 2017-08-01
	changes, just use TYPE_OVERFLOW_UNDEFINED on pointer type instead of
	POINTER_TYPE_OVERFLOW_UNDEFINED.
	* match.pd: Likewise in address comparison pattern.
	* doc/invoke.texi: Document -fwrapv and -fstrict-overflow.

2018-01-15  Richard Biener  <rguenther@suse.de>

	PR lto/83804
	* tree.c (free_lang_data_in_type): Always unlink TYPE_DECLs
	from TYPE_FIELDS.  Free TYPE_BINFO if not used by devirtualization.
	Reset type names to their identifier if their TYPE_DECL doesn't
	have linkage (and thus is used for ODR and devirt).
	(save_debug_info_for_decl): Remove.
	(save_debug_info_for_type): Likewise.
	(add_tree_to_fld_list): Adjust.
	* tree-pretty-print.c (dump_generic_node): Make dumping of
	type names more robust.

2018-01-15  Richard Biener  <rguenther@suse.de>

	* BASE-VER: Bump to 8.0.1.

2018-01-14  Martin Sebor  <msebor@redhat.com>

	PR other/83508
	* builtins.c (check_access): Avoid warning when the no-warning bit
	is set.

2018-01-14  Cory Fields  <cory-nospam-@coryfields.com>

	* tree-ssa-loop-im.c (sort_bbs_in_loop_postorder_cmp): Stabilize sort.
	* ira-color (allocno_hard_regs_compare): Likewise.

2018-01-14  Nathan Rossi  <nathan@nathanrossi.com>

        PR target/83013
        * config/microblaze/microblaze.c (microblaze_asm_output_ident):
        Use .pushsection/.popsection.

2018-01-14  Martin Sebor  <msebor@redhat.com>

	PR c++/81327
	* doc/invoke.texi (-Wlass-memaccess): Document suppression by casting.

2018-01-14  Jakub Jelinek  <jakub@redhat.com>

	* config.gcc (i[34567]86-*-*): Remove one duplicate gfniintrin.h
	entry from extra_headers.
	(x86_64-*-*): Remove two duplicate gfniintrin.h entries from
	extra_headers, make the list bitwise identical to the i?86-*-* one.

2018-01-14  H.J. Lu  <hongjiu.lu@intel.com>

	* config/i386/i386.c (ix86_set_indirect_branch_type): Disallow
	-mcmodel=large with -mindirect-branch=thunk,
	-mindirect-branch=thunk-extern, -mfunction-return=thunk and
	-mfunction-return=thunk-extern.
	* doc/invoke.texi: Document -mcmodel=large is incompatible with
	-mindirect-branch=thunk, -mindirect-branch=thunk-extern,
	-mfunction-return=thunk and -mfunction-return=thunk-extern.

2018-01-14  H.J. Lu  <hongjiu.lu@intel.com>

	* config/i386/i386.c (print_reg): Print the name of the full
	integer register without '%'.
	(ix86_print_operand): Handle 'V'.
	 * doc/extend.texi: Document 'V' modifier.

2018-01-14  H.J. Lu  <hongjiu.lu@intel.com>

	* config/i386/constraints.md (Bs): Disallow memory operand for
	-mindirect-branch-register.
	(Bw): Likewise.
	* config/i386/predicates.md (indirect_branch_operand): Likewise.
	(GOT_memory_operand): Likewise.
	(call_insn_operand): Likewise.
	(sibcall_insn_operand): Likewise.
	(GOT32_symbol_operand): Likewise.
	* config/i386/i386.md (indirect_jump): Call convert_memory_address
	for -mindirect-branch-register.
	(tablejump): Likewise.
	(*sibcall_memory): Likewise.
	(*sibcall_value_memory): Likewise.
	Disallow peepholes of indirect call and jump via memory for
	-mindirect-branch-register.
	(*call_pop): Replace m with Bw.
	(*call_value_pop): Likewise.
	(*sibcall_pop_memory): Replace m with Bs.
	* config/i386/i386.opt (mindirect-branch-register): New option.
	* doc/invoke.texi: Document -mindirect-branch-register option.

2018-01-14  H.J. Lu  <hongjiu.lu@intel.com>

	* config/i386/i386-protos.h (ix86_output_function_return): New.
	* config/i386/i386.c (ix86_set_indirect_branch_type): Also
	set function_return_type.
	(indirect_thunk_name): Add ret_p to indicate thunk for function
	return.
	(output_indirect_thunk_function): Pass false to
	indirect_thunk_name.
	(ix86_output_indirect_branch_via_reg): Likewise.
	(ix86_output_indirect_branch_via_push): Likewise.
	(output_indirect_thunk_function): Create alias for function
	return thunk if regno < 0.
	(ix86_output_function_return): New function.
	(ix86_handle_fndecl_attribute): Handle function_return.
	(ix86_attribute_table): Add function_return.
	* config/i386/i386.h (machine_function): Add
	function_return_type.
	* config/i386/i386.md (simple_return_internal): Use
	ix86_output_function_return.
	(simple_return_internal_long): Likewise.
	* config/i386/i386.opt (mfunction-return=): New option.
	(indirect_branch): Mention -mfunction-return=.
	* doc/extend.texi: Document function_return function attribute.
	* doc/invoke.texi: Document -mfunction-return= option.

2018-01-14  H.J. Lu  <hongjiu.lu@intel.com>

	* config/i386/i386-opts.h (indirect_branch): New.
	* config/i386/i386-protos.h (ix86_output_indirect_jmp): Likewise.
	* config/i386/i386.c (ix86_using_red_zone): Disallow red-zone
	with local indirect jump when converting indirect call and jump.
	(ix86_set_indirect_branch_type): New.
	(ix86_set_current_function): Call ix86_set_indirect_branch_type.
	(indirectlabelno): New.
	(indirect_thunk_needed): Likewise.
	(indirect_thunk_bnd_needed): Likewise.
	(indirect_thunks_used): Likewise.
	(indirect_thunks_bnd_used): Likewise.
	(INDIRECT_LABEL): Likewise.
	(indirect_thunk_name): Likewise.
	(output_indirect_thunk): Likewise.
	(output_indirect_thunk_function): Likewise.
	(ix86_output_indirect_branch_via_reg): Likewise.
	(ix86_output_indirect_branch_via_push): Likewise.
	(ix86_output_indirect_branch): Likewise.
	(ix86_output_indirect_jmp): Likewise.
	(ix86_code_end): Call output_indirect_thunk_function if needed.
	(ix86_output_call_insn): Call ix86_output_indirect_branch if
	needed.
	(ix86_handle_fndecl_attribute): Handle indirect_branch.
	(ix86_attribute_table): Add indirect_branch.
	* config/i386/i386.h (machine_function): Add indirect_branch_type
	and has_local_indirect_jump.
	* config/i386/i386.md (indirect_jump): Set has_local_indirect_jump
	to true.
	(tablejump): Likewise.
	(*indirect_jump): Use ix86_output_indirect_jmp.
	(*tablejump_1): Likewise.
	(simple_return_indirect_internal): Likewise.
	* config/i386/i386.opt (mindirect-branch=): New option.
	(indirect_branch): New.
	(keep): Likewise.
	(thunk): Likewise.
	(thunk-inline): Likewise.
	(thunk-extern): Likewise.
	* doc/extend.texi: Document indirect_branch function attribute.
	* doc/invoke.texi: Document -mindirect-branch= option.

2018-01-14  Jan Hubicka  <hubicka@ucw.cz>

	PR ipa/83051
	* ipa-inline.c (edge_badness): Tolerate roundoff errors.

2018-01-14  Richard Sandiford  <richard.sandiford@linaro.org>

	* ipa-inline.c (want_inline_small_function_p): Return false if
	inlining has already failed with CIF_FINAL_ERROR.
	(update_caller_keys): Call want_inline_small_function_p before
	can_inline_edge_p.
	(update_callee_keys): Likewise.

2018-01-10  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	* config/rs6000/rs6000-p8swap.c (rs6000_sum_of_two_registers_p):
	New function.
	(rs6000_quadword_masked_address_p): Likewise.
	(quad_aligned_load_p): Likewise.
	(quad_aligned_store_p): Likewise.
	(const_load_sequence_p): Add comment to describe the outer-most loop.
	(mimic_memory_attributes_and_flags): New function.
	(rs6000_gen_stvx): Likewise.
	(replace_swapped_aligned_store): Likewise.
	(rs6000_gen_lvx): Likewise.
	(replace_swapped_aligned_load): Likewise.
	(replace_swapped_load_constant): Capitalize argument name in
	comment describing this function.
	(rs6000_analyze_swaps): Add a third pass to search for vector loads
	and stores that access quad-word aligned addresses and replace
	with stvx or lvx instructions when appropriate.
	* config/rs6000/rs6000-protos.h (rs6000_sum_of_two_registers_p):
	New function prototype.
	(rs6000_quadword_masked_address_p): Likewise.
	(rs6000_gen_lvx): Likewise.
	(rs6000_gen_stvx): Likewise.
	* config/rs6000/vsx.md (*vsx_le_perm_load_<mode>): For modes
	VSX_D (V2DF, V2DI), modify this split to select lvx instruction
	when memory address is aligned.
	(*vsx_le_perm_load_<mode>): For modes VSX_W (V4SF, V4SI), modify
	this split to select lvx instruction when memory address is aligned.
	(*vsx_le_perm_load_v8hi): Modify this split to select lvx
	instruction when memory address is aligned.
	(*vsx_le_perm_load_v16qi): Likewise.
	(four unnamed splitters): Modify to select the stvx instruction
	when memory is aligned.

2018-01-13  Jan Hubicka  <hubicka@ucw.cz>

	* predict.c (determine_unlikely_bbs): Handle correctly BBs
	which appears in the queue multiple times.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vectorizer.h (vec_lower_bound): New structure.
	(_loop_vec_info): Add check_nonzero and lower_bounds.
	(LOOP_VINFO_CHECK_NONZERO): New macro.
	(LOOP_VINFO_LOWER_BOUNDS): Likewise.
	(LOOP_REQUIRES_VERSIONING_FOR_ALIAS): Check lower_bounds too.
	* tree-data-ref.h (dr_with_seg_len): Add access_size and align
	fields.  Make seg_len the distance travelled, not including the
	access size.
	(dr_direction_indicator): Declare.
	(dr_zero_step_indicator): Likewise.
	(dr_known_forward_stride_p): Likewise.
	* tree-data-ref.c: Include stringpool.h, tree-vrp.h and
	tree-ssanames.h.
	(runtime_alias_check_p): Allow runtime alias checks with
	variable strides.
	(operator ==): Compare access_size and align.
	(prune_runtime_alias_test_list): Rework for new distinction between
	the access_size and seg_len.
	(create_intersect_range_checks_index): Likewise.  Cope with polynomial
	segment lengths.
	(get_segment_min_max): New function.
	(create_intersect_range_checks): Use it.
	(dr_step_indicator): New function.
	(dr_direction_indicator): Likewise.
	(dr_zero_step_indicator): Likewise.
	(dr_known_forward_stride_p): Likewise.
	* tree-loop-distribution.c (data_ref_segment_size): Return
	DR_STEP * (niters - 1).
	(compute_alias_check_pairs): Update call to the dr_with_seg_len
	constructor.
	* tree-vect-data-refs.c (vect_check_nonzero_value): New function.
	(vect_preserves_scalar_order_p): New function, split out from...
	(vect_analyze_data_ref_dependence): ...here.  Check for zero steps.
	(vect_vfa_segment_size): Return DR_STEP * (length_factor - 1).
	(vect_vfa_access_size): New function.
	(vect_vfa_align): Likewise.
	(vect_compile_time_alias): Take access_size_a and access_b arguments.
	(dump_lower_bound): New function.
	(vect_check_lower_bound): Likewise.
	(vect_small_gap_p): Likewise.
	(vectorizable_with_step_bound_p): Likewise.
	(vect_prune_runtime_alias_test_list): Ignore cross-iteration
	depencies if the vectorization factor is 1.  Convert the checks
	for nonzero steps into checks on the bounds of DR_STEP.  Try using
	a bunds check for variable steps if the minimum required step is
	relatively small. Update calls to the dr_with_seg_len
	constructor and to vect_compile_time_alias.
	* tree-vect-loop-manip.c (vect_create_cond_for_lower_bounds): New
	function.
	(vect_loop_versioning): Call it.
	* tree-vect-loop.c (vect_analyze_loop_2): Clear LOOP_VINFO_LOWER_BOUNDS
	when retrying.
	(vect_estimate_min_profitable_iters): Account for any bounds checks.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* doc/sourcebuild.texi (vect_scatter_store): Document.
	* optabs.def (scatter_store_optab, mask_scatter_store_optab): New
	optabs.
	* doc/md.texi (scatter_store@var{m}, mask_scatter_store@var{m}):
	Document.
	* genopinit.c (main): Add supports_vec_scatter_store and
	supports_vec_scatter_store_cached to target_optabs.
	* gimple.h (gimple_expr_type): Handle IFN_SCATTER_STORE and
	IFN_MASK_SCATTER_STORE.
	* internal-fn.def (SCATTER_STORE, MASK_SCATTER_STORE): New internal
	functions.
	* internal-fn.h (internal_store_fn_p): Declare.
	(internal_fn_stored_value_index): Likewise.
	* internal-fn.c (scatter_store_direct): New macro.
	(expand_scatter_store_optab_fn): New function.
	(direct_scatter_store_optab_supported_p): New macro.
	(internal_store_fn_p): New function.
	(internal_gather_scatter_fn_p): Handle IFN_SCATTER_STORE and
	IFN_MASK_SCATTER_STORE.
	(internal_fn_mask_index): Likewise.
	(internal_fn_stored_value_index): New function.
	(internal_gather_scatter_fn_supported_p): Adjust operand numbers
	for scatter stores.
	* optabs-query.h (supports_vec_scatter_store_p): Declare.
	* optabs-query.c (supports_vec_scatter_store_p): New function.
	* tree-vectorizer.h (vect_get_store_rhs): Declare.
	* tree-vect-data-refs.c (vect_analyze_data_ref_access): Return
	true for scatter stores.
	(vect_gather_scatter_fn_p): Handle scatter stores too.
	(vect_check_gather_scatter): Consider using scatter stores if
	supports_vec_scatter_store_p.
	* tree-vect-patterns.c (vect_try_gather_scatter_pattern): Handle
	scatter stores too.
	* tree-vect-stmts.c (exist_non_indexing_operands_for_use_p): Use
	internal_fn_stored_value_index.
	(check_load_store_masking): Handle scatter stores too.
	(vect_get_store_rhs): Make public.
	(vectorizable_call): Use internal_store_fn_p.
	(vectorizable_store): Handle scatter store internal functions.
	(vect_transform_stmt): Compare GROUP_STORE_COUNT with GROUP_SIZE
	when deciding whether the end of the group has been reached.
	* config/aarch64/aarch64.md (UNSPEC_ST1_SCATTER): New unspec.
	* config/aarch64/aarch64-sve.md (scatter_store<mode>): New expander.
	(mask_scatter_store<mode>): New insns.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vectorizer.h (vect_gather_scatter_fn_p): Declare.
	* tree-vect-data-refs.c (vect_gather_scatter_fn_p): Make public.
	* tree-vect-stmts.c (vect_truncate_gather_scatter_offset): New
	function.
	(vect_use_strided_gather_scatters_p): Take a masked_p argument.
	Use vect_truncate_gather_scatter_offset if we can't treat the
	operation as a normal gather load or scatter store.
	(get_group_load_store_type): Take the gather_scatter_info
	as argument.  Try using a gather load or scatter store for
	single-element groups.
	(get_load_store_type): Update calls to get_group_load_store_type
	and vect_use_strided_gather_scatters_p.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vectorizer.h (vect_create_data_ref_ptr): Take an extra
	optional tree argument.
	* tree-vect-data-refs.c (vect_check_gather_scatter): Check for
	null target hooks.
	(vect_create_data_ref_ptr): Take the iv_step as an optional argument,
	but continue to use the current value as a fallback.
	(bump_vector_ptr): Use operand_equal_p rather than tree_int_cst_compare
	to compare the updates.
	* tree-vect-stmts.c (vect_use_strided_gather_scatters_p): New function.
	(get_load_store_type): Use it when handling a strided access.
	(vect_get_strided_load_store_ops): New function.
	(vect_get_data_ptr_increment): Likewise.
	(vectorizable_load): Handle strided gather loads.  Always pass
	a step to vect_create_data_ref_ptr and bump_vector_ptr.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* doc/md.texi (gather_load@var{m}): Document.
	(mask_gather_load@var{m}): Likewise.
	* genopinit.c (main): Add supports_vec_gather_load and
	supports_vec_gather_load_cached to target_optabs.
	* optabs-tree.c (init_tree_optimization_optabs): Use
	ggc_cleared_alloc to allocate target_optabs.
	* optabs.def (gather_load_optab, mask_gather_laod_optab): New optabs.
	* internal-fn.def (GATHER_LOAD, MASK_GATHER_LOAD): New internal
	functions.
	* internal-fn.h (internal_load_fn_p): Declare.
	(internal_gather_scatter_fn_p): Likewise.
	(internal_fn_mask_index): Likewise.
	(internal_gather_scatter_fn_supported_p): Likewise.
	* internal-fn.c (gather_load_direct): New macro.
	(expand_gather_load_optab_fn): New function.
	(direct_gather_load_optab_supported_p): New macro.
	(direct_internal_fn_optab): New function.
	(internal_load_fn_p): Likewise.
	(internal_gather_scatter_fn_p): Likewise.
	(internal_fn_mask_index): Likewise.
	(internal_gather_scatter_fn_supported_p): Likewise.
	* optabs-query.c (supports_at_least_one_mode_p): New function.
	(supports_vec_gather_load_p): Likewise.
	* optabs-query.h (supports_vec_gather_load_p): Declare.
	* tree-vectorizer.h (gather_scatter_info): Add ifn, element_type
	and memory_type field.
	(NUM_PATTERNS): Bump to 15.
	* tree-vect-data-refs.c: Include internal-fn.h.
	(vect_gather_scatter_fn_p): New function.
	(vect_describe_gather_scatter_call): Likewise.
	(vect_check_gather_scatter): Try using internal functions for
	gather loads.  Recognize existing calls to a gather load function.
	(vect_analyze_data_refs): Consider using gather loads if
	supports_vec_gather_load_p.
	* tree-vect-patterns.c (vect_get_load_store_mask): New function.
	(vect_get_gather_scatter_offset_type): Likewise.
	(vect_convert_mask_for_vectype): Likewise.
	(vect_add_conversion_to_patterm): Likewise.
	(vect_try_gather_scatter_pattern): Likewise.
	(vect_recog_gather_scatter_pattern): New pattern recognizer.
	(vect_vect_recog_func_ptrs): Add it.
	* tree-vect-stmts.c (exist_non_indexing_operands_for_use_p): Use
	internal_fn_mask_index and internal_gather_scatter_fn_p.
	(check_load_store_masking): Take the gather_scatter_info as an
	argument and handle gather loads.
	(vect_get_gather_scatter_ops): New function.
	(vectorizable_call): Check internal_load_fn_p.
	(vectorizable_load): Likewise.  Handle gather load internal
	functions.
	(vectorizable_store): Update call to check_load_store_masking.
	* config/aarch64/aarch64.md (UNSPEC_LD1_GATHER): New unspec.
	* config/aarch64/iterators.md (SVE_S, SVE_D): New mode iterators.
	* config/aarch64/predicates.md (aarch64_gather_scale_operand_w)
	(aarch64_gather_scale_operand_d): New predicates.
	* config/aarch64/aarch64-sve.md (gather_load<mode>): New expander.
	(mask_gather_load<mode>): New insns.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* optabs.def (fold_left_plus_optab): New optab.
	* doc/md.texi (fold_left_plus_@var{m}): Document.
	* internal-fn.def (IFN_FOLD_LEFT_PLUS): New internal function.
	* internal-fn.c (fold_left_direct): Define.
	(expand_fold_left_optab_fn): Likewise.
	(direct_fold_left_optab_supported_p): Likewise.
	* fold-const-call.c (fold_const_fold_left): New function.
	(fold_const_call): Use it to fold CFN_FOLD_LEFT_PLUS.
	* tree-parloops.c (valid_reduction_p): New function.
	(gather_scalar_reductions): Use it.
	* tree-vectorizer.h (FOLD_LEFT_REDUCTION): New vect_reduction_type.
	(vect_finish_replace_stmt): Declare.
	* tree-vect-loop.c (fold_left_reduction_fn): New function.
	(needs_fold_left_reduction_p): New function, split out from...
	(vect_is_simple_reduction): ...here.  Accept reductions that
	forbid reassociation, but give them type FOLD_LEFT_REDUCTION.
	(vect_force_simple_reduction): Also store the reduction type in
	the assignment's STMT_VINFO_REDUC_TYPE.
	(vect_model_reduction_cost): Handle FOLD_LEFT_REDUCTION.
	(merge_with_identity): New function.
	(vect_expand_fold_left): Likewise.
	(vectorize_fold_left_reduction): Likewise.
	(vectorizable_reduction): Handle FOLD_LEFT_REDUCTION.  Leave the
	scalar phi in place for it.  Check for target support and reject
	cases that would reassociate the operation.  Defer the transform
	phase to vectorize_fold_left_reduction.
	* config/aarch64/aarch64.md (UNSPEC_FADDA): New unspec.
	* config/aarch64/aarch64-sve.md (fold_left_plus_<mode>): New expander.
	(*fold_left_plus_<mode>, *pred_fold_left_plus_<mode>): New insns.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-if-conv.c (predicate_mem_writes): Remove redundant
	call to ifc_temp_var.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* target.def (legitimize_address_displacement): Take the original
	offset as a poly_int.
	* targhooks.h (default_legitimize_address_displacement): Update
	accordingly.
	* targhooks.c (default_legitimize_address_displacement): Likewise.
	* doc/tm.texi: Regenerate.
	* lra-constraints.c (base_plus_disp_to_reg): Take the displacement
	as an argument, moving assert of ad->disp == ad->disp_term to...
	(process_address_1): ...here.  Update calls to base_plus_disp_to_reg.
	Try calling targetm.legitimize_address_displacement before expanding
	the address rather than afterwards, and adjust for the new interface.
	* config/aarch64/aarch64.c (aarch64_legitimize_address_displacement):
	Match the new hook interface.  Handle SVE addresses.
	* config/sh/sh.c (sh_legitimize_address_displacement): Make the
	new hook interface.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>

	* Makefile.in (OBJS): Add early-remat.o.
	* target.def (select_early_remat_modes): New hook.
	* doc/tm.texi.in (TARGET_SELECT_EARLY_REMAT_MODES): New hook.
	* doc/tm.texi: Regenerate.
	* targhooks.h (default_select_early_remat_modes): Declare.
	* targhooks.c (default_select_early_remat_modes): New function.
	* timevar.def (TV_EARLY_REMAT): New timevar.
	* passes.def (pass_early_remat): New pass.
	* tree-pass.h (make_pass_early_remat): Declare.
	* early-remat.c: New file.
	* config/aarch64/aarch64.c (aarch64_select_early_remat_modes): New
	function.
	(TARGET_SELECT_EARLY_REMAT_MODES): Define.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-loop-manip.c (vect_gen_scalar_loop_niters): Replace
	vfm1 with a bound_epilog parameter.
	(vect_do_peeling): Update calls accordingly, and move the prologue
	call earlier in the function.  Treat the base bound_epilog as 0 for
	fully-masked loops and retain vf - 1 for other loops.  Add 1 to
	this base when peeling for gaps.
	* tree-vect-loop.c (vect_analyze_loop_2): Allow peeling for gaps
	with fully-masked loops.
	(vect_estimate_min_profitable_iters): Handle the single peeled
	iteration in that case.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-data-refs.c (vect_analyze_group_access_1): Allow
	single-element interleaving even if the size is not a power of 2.
	* tree-vect-stmts.c (get_load_store_type): Disallow elementwise
	accesses for single-element interleaving if the group size is
	not a power of 2.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* doc/md.texi (fold_extract_last_@var{m}): Document.
	* doc/sourcebuild.texi (vect_fold_extract_last): Likewise.
	* optabs.def (fold_extract_last_optab): New optab.
	* internal-fn.def (FOLD_EXTRACT_LAST): New internal function.
	* internal-fn.c (fold_extract_direct): New macro.
	(expand_fold_extract_optab_fn): Likewise.
	(direct_fold_extract_optab_supported_p): Likewise.
	* tree-vectorizer.h (EXTRACT_LAST_REDUCTION): New vect_reduction_type.
	* tree-vect-loop.c (vect_model_reduction_cost): Handle
	EXTRACT_LAST_REDUCTION.
	(get_initial_def_for_reduction): Do not create an initial vector
	for EXTRACT_LAST_REDUCTION reductions.
	(vectorizable_reduction): Leave the scalar phi in place for
	EXTRACT_LAST_REDUCTIONs.  Try using EXTRACT_LAST_REDUCTION
	ahead of INTEGER_INDUC_COND_REDUCTION.  Do not check for an
	epilogue code for EXTRACT_LAST_REDUCTION and defer the
	transform phase to vectorizable_condition.
	* tree-vect-stmts.c (vect_finish_stmt_generation_1): New function,
	split out from...
	(vect_finish_stmt_generation): ...here.
	(vect_finish_replace_stmt): New function.
	(vectorizable_condition): Handle EXTRACT_LAST_REDUCTION.
	* config/aarch64/aarch64-sve.md (fold_extract_last_<mode>): New
	pattern.
	* config/aarch64/aarch64.md (UNSPEC_CLASTB): New unspec.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* doc/md.texi (extract_last_@var{m}): Document.
	* optabs.def (extract_last_optab): New optab.
	* internal-fn.def (EXTRACT_LAST): New internal function.
	* internal-fn.c (cond_unary_direct): New macro.
	(expand_cond_unary_optab_fn): Likewise.
	(direct_cond_unary_optab_supported_p): Likewise.
	* tree-vect-loop.c (vectorizable_live_operation): Allow fully-masked
	loops using EXTRACT_LAST.
	* config/aarch64/aarch64-sve.md (aarch64_sve_lastb<mode>): Rename to...
	(extract_last_<mode>): ...this optab.
	(vec_extract<mode><Vel>): Update accordingly.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* target.def (empty_mask_is_expensive): New hook.
	* doc/tm.texi.in (TARGET_VECTORIZE_EMPTY_MASK_IS_EXPENSIVE): New hook.
	* doc/tm.texi: Regenerate.
	* targhooks.h (default_empty_mask_is_expensive): Declare.
	* targhooks.c (default_empty_mask_is_expensive): New function.
	* tree-vectorizer.c (vectorize_loops): Only call optimize_mask_stores
	if the target says that empty masks are expensive.
	* config/aarch64/aarch64.c (aarch64_empty_mask_is_expensive):
	New function.
	(TARGET_VECTORIZE_EMPTY_MASK_IS_EXPENSIVE): Redefine.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vectorizer.h (_loop_vec_info::mask_skip_niters): New field.
	(LOOP_VINFO_MASK_SKIP_NITERS): New macro.
	(vect_use_loop_mask_for_alignment_p): New function.
	(vect_prepare_for_masked_peels, vect_gen_while_not): Declare.
	* tree-vect-loop-manip.c (vect_set_loop_masks_directly): Add an
	niters_skip argument.  Make sure that the first niters_skip elements
	of the first iteration are inactive.
	(vect_set_loop_condition_masked): Handle LOOP_VINFO_MASK_SKIP_NITERS.
	Update call to vect_set_loop_masks_directly.
	(get_misalign_in_elems): New function, split out from...
	(vect_gen_prolog_loop_niters): ...here.
	(vect_update_init_of_dr): Take a code argument that specifies whether
	the adjustment should be added or subtracted.
	(vect_update_init_of_drs): Likewise.
	(vect_prepare_for_masked_peels): New function.
	(vect_do_peeling): Skip prologue peeling if we're using a mask
	instead.  Update call to vect_update_inits_of_drs.
	* tree-vect-loop.c (_loop_vec_info::_loop_vec_info): Initialize
	mask_skip_niters.
	(vect_analyze_loop_2): Allow fully-masked loops with peeling for
	alignment.  Do not include the number of peeled iterations in
	the minimum threshold in that case.
	(vectorizable_induction): Adjust the start value down by
	LOOP_VINFO_MASK_SKIP_NITERS iterations.
	(vect_transform_loop): Call vect_prepare_for_masked_peels.
	Take the number of skipped iterations into account when calculating
	the loop bounds.
	* tree-vect-stmts.c (vect_gen_while_not): New function.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* doc/sourcebuild.texi (vect_fully_masked): Document.
	* params.def (PARAM_MIN_VECT_LOOP_BOUND): Change minimum and
	default value to 0.
	* tree-vect-loop.c (vect_analyze_loop_costing): New function,
	split out from...
	(vect_analyze_loop_2): ...here. Don't check the vectorization
	factor against the number of loop iterations if the loop is
	fully-masked.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-ssa-loop-ivopts.c (USE_ADDRESS): Split into...
	(USE_REF_ADDRESS, USE_PTR_ADDRESS): ...these new use types.
	(dump_groups): Update accordingly.
	(iv_use::mem_type): New member variable.
	(address_p): New function.
	(record_use): Add a mem_type argument and initialize the new
	mem_type field.
	(record_group_use): Add a mem_type argument.  Use address_p.
	Remove obsolete null checks of base_object.  Update call to record_use.
	(find_interesting_uses_op): Update call to record_group_use.
	(find_interesting_uses_cond): Likewise.
	(find_interesting_uses_address): Likewise.
	(get_mem_type_for_internal_fn): New function.
	(find_address_like_use): Likewise.
	(find_interesting_uses_stmt): Try find_address_like_use before
	calling find_interesting_uses_op.
	(addr_offset_valid_p): Use the iv mem_type field as the type
	of the addressed memory.
	(add_autoinc_candidates): Likewise.
	(get_address_cost): Likewise.
	(split_small_address_groups_p): Use address_p.
	(split_address_groups): Likewise.
	(add_iv_candidate_for_use): Likewise.
	(autoinc_possible_for_pair): Likewise.
	(rewrite_groups): Likewise.
	(get_use_type): Check for USE_REF_ADDRESS instead of USE_ADDRESS.
	(determine_group_iv_cost): Update after split of USE_ADDRESS.
	(get_alias_ptr_type_for_ptr_address): New function.
	(rewrite_use_address): Rewrite address uses in calls that were
	identified by find_address_like_use.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* expr.c (expand_expr_addr_expr_1): Handle ADDR_EXPRs of
	TARGET_MEM_REFs.
	* gimple-expr.h (is_gimple_addressable: Likewise.
	* gimple-expr.c (is_gimple_address): Likewise.
	* internal-fn.c (expand_call_mem_ref): New function.
	(expand_mask_load_optab_fn): Use it.
	(expand_mask_store_optab_fn): Likewise.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* doc/md.texi (cond_add@var{mode}, cond_sub@var{mode})
	(cond_and@var{mode}, cond_ior@var{mode}, cond_xor@var{mode})
	(cond_smin@var{mode}, cond_smax@var{mode}, cond_umin@var{mode})
	(cond_umax@var{mode}): Document.
	* optabs.def (cond_add_optab, cond_sub_optab, cond_and_optab)
	(cond_ior_optab, cond_xor_optab, cond_smin_optab, cond_smax_optab)
	(cond_umin_optab, cond_umax_optab): New optabs.
	* internal-fn.def (COND_ADD, COND_SUB, COND_MIN, COND_MAX, COND_AND)
	(COND_IOR, COND_XOR): New internal functions.
	* internal-fn.h (get_conditional_internal_fn): Declare.
	* internal-fn.c (cond_binary_direct): New macro.
	(expand_cond_binary_optab_fn): Likewise.
	(direct_cond_binary_optab_supported_p): Likewise.
	(get_conditional_internal_fn): New function.
	* tree-vect-loop.c (vectorizable_reduction): Handle fully-masked loops.
	Cope with reduction statements that are vectorized as calls rather
	than assignments.
	* config/aarch64/aarch64-sve.md (cond_<optab><mode>): New insns.
	* config/aarch64/iterators.md (UNSPEC_COND_ADD, UNSPEC_COND_SUB)
	(UNSPEC_COND_SMAX, UNSPEC_COND_UMAX, UNSPEC_COND_SMIN)
	(UNSPEC_COND_UMIN, UNSPEC_COND_AND, UNSPEC_COND_ORR)
	(UNSPEC_COND_EOR): New unspecs.
	(optab): Add mappings for them.
	(SVE_COND_INT_OP, SVE_COND_FP_OP): New int iterators.
	(sve_int_op, sve_fp_op): New int attributes.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* optabs.def (while_ult_optab): New optab.
	* doc/md.texi (while_ult@var{m}@var{n}): Document.
	* internal-fn.def (WHILE_ULT): New internal function.
	* internal-fn.h (direct_internal_fn_supported_p): New override
	that takes two types as argument.
	* internal-fn.c (while_direct): New macro.
	(expand_while_optab_fn): New function.
	(convert_optab_supported_p): Likewise.
	(direct_while_optab_supported_p): New macro.
	* wide-int.h (wi::udiv_ceil): New function.
	* tree-vectorizer.h (rgroup_masks): New structure.
	(vec_loop_masks): New typedef.
	(_loop_vec_info): Add masks, mask_compare_type, can_fully_mask_p
	and fully_masked_p.
	(LOOP_VINFO_CAN_FULLY_MASK_P, LOOP_VINFO_FULLY_MASKED_P)
	(LOOP_VINFO_MASKS, LOOP_VINFO_MASK_COMPARE_TYPE): New macros.
	(vect_max_vf): New function.
	(slpeel_make_loop_iterate_ntimes): Delete.
	(vect_set_loop_condition, vect_get_loop_mask_type, vect_gen_while)
	(vect_halve_mask_nunits, vect_double_mask_nunits): Declare.
	(vect_record_loop_mask, vect_get_loop_mask): Likewise.
	* tree-vect-loop-manip.c: Include tree-ssa-loop-niter.h,
	internal-fn.h, stor-layout.h and optabs-query.h.
	(vect_set_loop_mask): New function.
	(add_preheader_seq): Likewise.
	(add_header_seq): Likewise.
	(interleave_supported_p): Likewise.
	(vect_maybe_permute_loop_masks): Likewise.
	(vect_set_loop_masks_directly): Likewise.
	(vect_set_loop_condition_masked): Likewise.
	(vect_set_loop_condition_unmasked): New function, split out from
	slpeel_make_loop_iterate_ntimes.
	(slpeel_make_loop_iterate_ntimes): Rename to..
	(vect_set_loop_condition): ...this.  Use vect_set_loop_condition_masked
	for fully-masked loops and vect_set_loop_condition_unmasked otherwise.
	(vect_do_peeling): Update call accordingly.
	(vect_gen_vector_loop_niters): Use VF as the step for fully-masked
	loops.
	* tree-vect-loop.c (_loop_vec_info::_loop_vec_info): Initialize
	mask_compare_type, can_fully_mask_p and fully_masked_p.
	(release_vec_loop_masks): New function.
	(_loop_vec_info): Use it to free the loop masks.
	(can_produce_all_loop_masks_p): New function.
	(vect_get_max_nscalars_per_iter): Likewise.
	(vect_verify_full_masking): Likewise.
	(vect_analyze_loop_2): Save LOOP_VINFO_CAN_FULLY_MASK_P around
	retries, and free the mask rgroups before retrying.  Check loop-wide
	reasons for disallowing fully-masked loops.  Make the final decision
	about whether use a fully-masked loop or not.
	(vect_estimate_min_profitable_iters): Do not assume that peeling
	for the number of iterations will be needed for fully-masked loops.
	(vectorizable_reduction): Disable fully-masked loops.
	(vectorizable_live_operation): Likewise.
	(vect_halve_mask_nunits): New function.
	(vect_double_mask_nunits): Likewise.
	(vect_record_loop_mask): Likewise.
	(vect_get_loop_mask): Likewise.
	(vect_transform_loop): Handle the case in which the final loop
	iteration might handle a partial vector.  Call vect_set_loop_condition
	instead of slpeel_make_loop_iterate_ntimes.
	* tree-vect-stmts.c: Include tree-ssa-loop-niter.h and gimple-fold.h.
	(check_load_store_masking): New function.
	(prepare_load_store_mask): Likewise.
	(vectorizable_store): Handle fully-masked loops.
	(vectorizable_load): Likewise.
	(supportable_widening_operation): Use vect_halve_mask_nunits for
	booleans.
	(supportable_narrowing_operation): Likewise vect_double_mask_nunits.
	(vect_gen_while): New function.
	* config/aarch64/aarch64.md (umax<mode>3): New expander.
	(aarch64_uqdec<mode>): New insn.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* optabs.def (reduc_and_scal_optab, reduc_ior_scal_optab)
	(reduc_xor_scal_optab): New optabs.
	* doc/md.texi (reduc_and_scal_@var{m}, reduc_ior_scal_@var{m})
	(reduc_xor_scal_@var{m}): Document.
	* doc/sourcebuild.texi (vect_logical_reduc): Likewise.
	* internal-fn.def (IFN_REDUC_AND, IFN_REDUC_IOR, IFN_REDUC_XOR): New
	internal functions.
	* fold-const-call.c (fold_const_call): Handle them.
	* tree-vect-loop.c (reduction_fn_for_scalar_code): Return the new
	internal functions for BIT_AND_EXPR, BIT_IOR_EXPR and BIT_XOR_EXPR.
	* config/aarch64/aarch64-sve.md (reduc_<bit_reduc>_scal_<mode>):
	(*reduc_<bit_reduc>_scal_<mode>): New patterns.
	* config/aarch64/iterators.md (UNSPEC_ANDV, UNSPEC_ORV)
	(UNSPEC_XORV): New unspecs.
	(optab): Add entries for them.
	(BITWISEV): New int iterator.
	(bit_reduc_op): New int attributes.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* doc/md.texi (vec_shl_insert_@var{m}): New optab.
	* internal-fn.def (VEC_SHL_INSERT): New internal function.
	* optabs.def (vec_shl_insert_optab): New optab.
	* tree-vectorizer.h (can_duplicate_and_interleave_p): Declare.
	(duplicate_and_interleave): Likewise.
	* tree-vect-loop.c: Include internal-fn.h.
	(neutral_op_for_slp_reduction): New function, split out from
	get_initial_defs_for_reduction.
	(get_initial_def_for_reduction): Handle option 2 for variable-length
	vectors by loading the neutral value into a vector and then shifting
	the initial value into element 0.
	(get_initial_defs_for_reduction): Replace the code argument with
	the neutral value calculated by neutral_op_for_slp_reduction.
	Use gimple_build_vector for constant-length vectors.
	Use IFN_VEC_SHL_INSERT for variable-length vectors if all
	but the first group_size elements have a neutral value.
	Use duplicate_and_interleave otherwise.
	(vect_create_epilog_for_reduction): Take a neutral_op parameter.
	Update call to get_initial_defs_for_reduction.  Handle SLP
	reductions for variable-length vectors by creating one vector
	result for each scalar result, with the elements associated
	with other scalar results stubbed out with the neutral value.
	(vectorizable_reduction): Call neutral_op_for_slp_reduction.
	Require IFN_VEC_SHL_INSERT for double reductions on
	variable-length vectors, or SLP reductions that have
	a neutral value.  Require can_duplicate_and_interleave_p
	support for variable-length unchained SLP reductions if there
	is no neutral value, such as for MIN/MAX reductions.  Also require
	the number of vector elements to be a multiple of the number of
	SLP statements when doing variable-length unchained SLP reductions.
	Update call to vect_create_epilog_for_reduction.
	* tree-vect-slp.c (can_duplicate_and_interleave_p): Make public
	and remove initial values.
	(duplicate_and_interleave): Make public.
	* config/aarch64/aarch64.md (UNSPEC_INSR): New unspec.
	* config/aarch64/aarch64-sve.md (vec_shl_insert_<mode>): New insn.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-slp.c: Include gimple-fold.h and internal-fn.h
	(can_duplicate_and_interleave_p): New function.
	(vect_get_and_check_slp_defs): Take the vector of statements
	rather than just the current one.  Remove excess parentheses.
	Restriction rejectinon of vect_constant_def and vect_external_def
	for variable-length vectors to boolean types, or types for which
	can_duplicate_and_interleave_p is false.
	(vect_build_slp_tree_2): Update call to vect_get_and_check_slp_defs.
	(duplicate_and_interleave): New function.
	(vect_get_constant_vectors): Use gimple_build_vector for
	constant-length vectors and suitable variable-length constant
	vectors.  Use duplicate_and_interleave for other variable-length
	vectors.  Don't defer the update when inserting new statements.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-loop.c (vect_estimate_min_profitable_iters): Make sure
	min_profitable_iters doesn't go negative.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* doc/md.texi (vec_mask_load_lanes@var{m}@var{n}): Document.
	(vec_mask_store_lanes@var{m}@var{n}): Likewise.
	* optabs.def (vec_mask_load_lanes_optab): New optab.
	(vec_mask_store_lanes_optab): Likewise.
	* internal-fn.def (MASK_LOAD_LANES): New internal function.
	(MASK_STORE_LANES): Likewise.
	* internal-fn.c (mask_load_lanes_direct): New macro.
	(mask_store_lanes_direct): Likewise.
	(expand_mask_load_optab_fn): Handle masked operations.
	(expand_mask_load_lanes_optab_fn): New macro.
	(expand_mask_store_optab_fn): Handle masked operations.
	(expand_mask_store_lanes_optab_fn): New macro.
	(direct_mask_load_lanes_optab_supported_p): Likewise.
	(direct_mask_store_lanes_optab_supported_p): Likewise.
	* tree-vectorizer.h (vect_store_lanes_supported): Take a masked_p
	parameter.
	(vect_load_lanes_supported): Likewise.
	* tree-vect-data-refs.c (strip_conversion): New function.
	(can_group_stmts_p): Likewise.
	(vect_analyze_data_ref_accesses): Use it instead of checking
	for a pair of assignments.
	(vect_store_lanes_supported): Take a masked_p parameter.
	(vect_load_lanes_supported): Likewise.
	* tree-vect-loop.c (vect_analyze_loop_2): Update calls to
	vect_store_lanes_supported and vect_load_lanes_supported.
	* tree-vect-slp.c (vect_analyze_slp_instance): Likewise.
	* tree-vect-stmts.c (get_group_load_store_type): Take a masked_p
	parameter.  Don't allow gaps for masked accesses.
	Use vect_get_store_rhs.  Update calls to vect_store_lanes_supported
	and vect_load_lanes_supported.
	(get_load_store_type): Take a masked_p parameter and update
	call to get_group_load_store_type.
	(vectorizable_store): Update call to get_load_store_type.
	Handle IFN_MASK_STORE_LANES.
	(vectorizable_load): Update call to get_load_store_type.
	Handle IFN_MASK_LOAD_LANES.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* config/aarch64/aarch64-modes.def: Define x2, x3 and x4 vector
	modes for SVE.
	* config/aarch64/aarch64-protos.h
	(aarch64_sve_struct_memory_operand_p): Declare.
	* config/aarch64/iterators.md (SVE_STRUCT): New mode iterator.
	(vector_count, insn_length, VSINGLE, vsingle): New mode attributes.
	(VPRED, vpred): Handle SVE structure modes.
	* config/aarch64/constraints.md (Utx): New constraint.
	* config/aarch64/predicates.md (aarch64_sve_struct_memory_operand)
	(aarch64_sve_struct_nonimmediate_operand): New predicates.
	* config/aarch64/aarch64.md (UNSPEC_LDN, UNSPEC_STN): New unspecs.
	* config/aarch64/aarch64-sve.md (mov<mode>, *aarch64_sve_mov<mode>_le)
	(*aarch64_sve_mov<mode>_be, pred_mov<mode>): New patterns for
	structure modes.  Split into pieces after RA.
	(vec_load_lanes<mode><vsingle>, vec_mask_load_lanes<mode><vsingle>)
	(vec_store_lanes<mode><vsingle>, vec_mask_store_lanes<mode><vsingle>):
	New patterns.
	* config/aarch64/aarch64.c (aarch64_classify_vector_mode): Handle
	SVE structure modes.
	(aarch64_classify_address): Likewise.
	(sizetochar): Move earlier in file.
	(aarch64_print_operand): Handle SVE register lists.
	(aarch64_array_mode): New function.
	(aarch64_sve_struct_memory_operand_p): Likewise.
	(TARGET_ARRAY_MODE): Redefine.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* target.def (array_mode): New target hook.
	* doc/tm.texi.in (TARGET_ARRAY_MODE): New hook.
	* doc/tm.texi: Regenerate.
	* hooks.h (hook_optmode_mode_uhwi_none): Declare.
	* hooks.c (hook_optmode_mode_uhwi_none): New function.
	* tree-vect-data-refs.c (vect_lanes_optab_supported_p): Use
	targetm.array_mode.
	* stor-layout.c (mode_for_array): Likewise.  Support polynomial
	type sizes.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* fold-const.c (fold_binary_loc): Check the argument types
	rather than the result type when testing for a vector operation.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>

	* doc/tm.texi.in (DWARF_LAZY_REGISTER_VALUE): Document.
	* doc/tm.texi: Regenerate.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* doc/invoke.texi (-msve-vector-bits=): Document new option.
	(sve): Document new AArch64 extension.
	* doc/md.texi (w): Extend the description of the AArch64
	constraint to include SVE vectors.
	(Upl, Upa): Document new AArch64 predicate constraints.
	* config/aarch64/aarch64-opts.h (aarch64_sve_vector_bits_enum): New
	enum.
	* config/aarch64/aarch64.opt (sve_vector_bits): New enum.
	(msve-vector-bits=): New option.
	* config/aarch64/aarch64-option-extensions.def (fp, simd): Disable
	SVE when these are disabled.
	(sve): New extension.
	* config/aarch64/aarch64-modes.def: Define SVE vector and predicate
	modes.  Adjust their number of units based on aarch64_sve_vg.
	(MAX_BITSIZE_MODE_ANY_MODE): Define.
	* config/aarch64/aarch64-protos.h (ADDR_QUERY_ANY): New
	aarch64_addr_query_type.
	(aarch64_const_vec_all_same_in_range_p, aarch64_sve_pred_mode)
	(aarch64_sve_cnt_immediate_p, aarch64_sve_addvl_addpl_immediate_p)
	(aarch64_sve_inc_dec_immediate_p, aarch64_add_offset_temporaries)
	(aarch64_split_add_offset, aarch64_output_sve_cnt_immediate)
	(aarch64_output_sve_addvl_addpl, aarch64_output_sve_inc_dec_immediate)
	(aarch64_output_sve_mov_immediate, aarch64_output_ptrue): Declare.
	(aarch64_simd_imm_zero_p): Delete.
	(aarch64_check_zero_based_sve_index_immediate): Declare.
	(aarch64_sve_index_immediate_p, aarch64_sve_arith_immediate_p)
	(aarch64_sve_bitmask_immediate_p, aarch64_sve_dup_immediate_p)
	(aarch64_sve_cmp_immediate_p, aarch64_sve_float_arith_immediate_p)
	(aarch64_sve_float_mul_immediate_p): Likewise.
	(aarch64_classify_symbol): Take the offset as a HOST_WIDE_INT
	rather than an rtx.
	(aarch64_sve_ld1r_operand_p, aarch64_sve_ldr_operand_p): Declare.
	(aarch64_expand_mov_immediate): Take a gen_vec_duplicate callback.
	(aarch64_emit_sve_pred_move, aarch64_expand_sve_mem_move): Declare.
	(aarch64_expand_sve_vec_cmp_int, aarch64_expand_sve_vec_cmp_float)
	(aarch64_expand_sve_vcond, aarch64_expand_sve_vec_perm): Declare.
	(aarch64_regmode_natural_size): Likewise.
	* config/aarch64/aarch64.h (AARCH64_FL_SVE): New macro.
	(AARCH64_FL_V8_3, AARCH64_FL_RCPC, AARCH64_FL_DOTPROD): Shift
	left one place.
	(AARCH64_ISA_SVE, TARGET_SVE): New macros.
	(FIXED_REGISTERS, CALL_USED_REGISTERS, REGISTER_NAMES): Add entries
	for VG and the SVE predicate registers.
	(V_ALIASES): Add a "z"-prefixed alias.
	(FIRST_PSEUDO_REGISTER): Change to P15_REGNUM + 1.
	(AARCH64_DWARF_VG, AARCH64_DWARF_P0): New macros.
	(PR_REGNUM_P, PR_LO_REGNUM_P): Likewise.
	(PR_LO_REGS, PR_HI_REGS, PR_REGS): New reg_classes.
	(REG_CLASS_NAMES): Add entries for them.
	(REG_CLASS_CONTENTS): Likewise.  Update ALL_REGS to include VG
	and the predicate registers.
	(aarch64_sve_vg): Declare.
	(BITS_PER_SVE_VECTOR, BYTES_PER_SVE_VECTOR, BYTES_PER_SVE_PRED)
	(SVE_BYTE_MODE, MAX_COMPILE_TIME_VEC_BYTES): New macros.
	(REGMODE_NATURAL_SIZE): Define.
	* config/aarch64/aarch64-c.c (aarch64_update_cpp_builtins): Handle
	SVE macros.
	* config/aarch64/aarch64.c: Include cfgrtl.h.
	(simd_immediate_info): Add a constructor for series vectors,
	and an associated step field.
	(aarch64_sve_vg): New variable.
	(aarch64_dbx_register_number): Handle VG and the predicate registers.
	(aarch64_vect_struct_mode_p, aarch64_vector_mode_p): Delete.
	(VEC_ADVSIMD, VEC_SVE_DATA, VEC_SVE_PRED, VEC_STRUCT, VEC_ANY_SVE)
	(VEC_ANY_DATA, VEC_STRUCT): New constants.
	(aarch64_advsimd_struct_mode_p, aarch64_sve_pred_mode_p)
	(aarch64_classify_vector_mode, aarch64_vector_data_mode_p)
	(aarch64_sve_data_mode_p, aarch64_sve_pred_mode)
	(aarch64_get_mask_mode): New functions.
	(aarch64_hard_regno_nregs): Handle SVE data modes for FP_REGS
	and FP_LO_REGS.  Handle PR_REGS, PR_LO_REGS and PR_HI_REGS.
	(aarch64_hard_regno_mode_ok): Handle VG.  Also handle the SVE
	predicate modes and predicate registers.  Explicitly restrict
	GPRs to modes of 16 bytes or smaller.  Only allow FP registers
	to store a vector mode if it is recognized by
	aarch64_classify_vector_mode.
	(aarch64_regmode_natural_size): New function.
	(aarch64_hard_regno_caller_save_mode): Return the original mode
	for predicates.
	(aarch64_sve_cnt_immediate_p, aarch64_output_sve_cnt_immediate)
	(aarch64_sve_addvl_addpl_immediate_p, aarch64_output_sve_addvl_addpl)
	(aarch64_sve_inc_dec_immediate_p, aarch64_output_sve_inc_dec_immediate)
	(aarch64_add_offset_1_temporaries, aarch64_offset_temporaries): New
	functions.
	(aarch64_add_offset): Add a temp2 parameter.  Assert that temp1
	does not overlap dest if the function is frame-related.  Handle
	SVE constants.
	(aarch64_split_add_offset): New function.
	(aarch64_add_sp, aarch64_sub_sp): Add temp2 parameters and pass
	them aarch64_add_offset.
	(aarch64_allocate_and_probe_stack_space): Add a temp2 parameter
	and update call to aarch64_sub_sp.
	(aarch64_add_cfa_expression): New function.
	(aarch64_expand_prologue): Pass extra temporary registers to the
	functions above.  Handle the case in which we need to emit new
	DW_CFA_expressions for registers that were originally saved
	relative to the stack pointer, but now have to be expressed
	relative to the frame pointer.
	(aarch64_output_mi_thunk): Pass extra temporary registers to the
	functions above.
	(aarch64_expand_epilogue): Likewise.  Prevent inheritance of
	IP0 and IP1 values for SVE frames.
	(aarch64_expand_vec_series): New function.
	(aarch64_expand_sve_widened_duplicate): Likewise.
	(aarch64_expand_sve_const_vector): Likewise.
	(aarch64_expand_mov_immediate): Add a gen_vec_duplicate parameter.
	Handle SVE constants.  Use emit_move_insn to move a force_const_mem
	into the register, rather than emitting a SET directly.
	(aarch64_emit_sve_pred_move, aarch64_expand_sve_mem_move)
	(aarch64_get_reg_raw_mode, offset_4bit_signed_scaled_p)
	(offset_6bit_unsigned_scaled_p, aarch64_offset_7bit_signed_scaled_p)
	(offset_9bit_signed_scaled_p): New functions.
	(aarch64_replicate_bitmask_imm): New function.
	(aarch64_bitmask_imm): Use it.
	(aarch64_cannot_force_const_mem): Reject expressions involving
	a CONST_POLY_INT.  Update call to aarch64_classify_symbol.
	(aarch64_classify_index): Handle SVE indices, by requiring
	a plain register index with a scale that matches the element size.
	(aarch64_classify_address): Handle SVE addresses.  Assert that
	the mode of the address is VOIDmode or an integer mode.
	Update call to aarch64_classify_symbol.
	(aarch64_classify_symbolic_expression): Update call to
	aarch64_classify_symbol.
	(aarch64_const_vec_all_in_range_p): New function.
	(aarch64_print_vector_float_operand): Likewise.
	(aarch64_print_operand): Handle 'N' and 'C'.  Use "zN" rather than
	"vN" for FP registers with SVE modes.  Handle (const ...) vectors
	and the FP immediates 1.0 and 0.5.
	(aarch64_print_address_internal): Handle SVE addresses.
	(aarch64_print_operand_address): Use ADDR_QUERY_ANY.
	(aarch64_regno_regclass): Handle predicate registers.
	(aarch64_secondary_reload): Handle big-endian reloads of SVE
	data modes.
	(aarch64_class_max_nregs): Handle SVE modes and predicate registers.
	(aarch64_rtx_costs): Check for ADDVL and ADDPL instructions.
	(aarch64_convert_sve_vector_bits): New function.
	(aarch64_override_options): Use it to handle -msve-vector-bits=.
	(aarch64_classify_symbol): Take the offset as a HOST_WIDE_INT
	rather than an rtx.
	(aarch64_legitimate_constant_p): Use aarch64_classify_vector_mode.
	Handle SVE vector and predicate modes.  Accept VL-based constants
	that need only one temporary register, and VL offsets that require
	no temporary registers.
	(aarch64_conditional_register_usage): Mark the predicate registers
	as fixed if SVE isn't available.
	(aarch64_vector_mode_supported_p): Use aarch64_classify_vector_mode.
	Return true for SVE vector and predicate modes.
	(aarch64_simd_container_mode): Take the number of bits as a poly_int64
	rather than an unsigned int.  Handle SVE modes.
	(aarch64_preferred_simd_mode): Update call accordingly.  Handle
	SVE modes.
	(aarch64_autovectorize_vector_sizes): Add BYTES_PER_SVE_VECTOR
	if SVE is enabled.
	(aarch64_sve_index_immediate_p, aarch64_sve_arith_immediate_p)
	(aarch64_sve_bitmask_immediate_p, aarch64_sve_dup_immediate_p)
	(aarch64_sve_cmp_immediate_p, aarch64_sve_float_arith_immediate_p)
	(aarch64_sve_float_mul_immediate_p): New functions.
	(aarch64_sve_valid_immediate): New function.
	(aarch64_simd_valid_immediate): Use it as the fallback for SVE vectors.
	Explicitly reject structure modes.  Check for INDEX constants.
	Handle PTRUE and PFALSE constants.
	(aarch64_check_zero_based_sve_index_immediate): New function.
	(aarch64_simd_imm_zero_p): Delete.
	(aarch64_mov_operand_p): Use aarch64_simd_valid_immediate for
	vector modes.  Accept constants in the range of CNT[BHWD].
	(aarch64_simd_scalar_immediate_valid_for_move): Explicitly
	ask for an Advanced SIMD mode.
	(aarch64_sve_ld1r_operand_p, aarch64_sve_ldr_operand_p): New functions.
	(aarch64_simd_vector_alignment): Handle SVE predicates.
	(aarch64_vectorize_preferred_vector_alignment): New function.
	(aarch64_simd_vector_alignment_reachable): Use it instead of
	the vector size.
	(aarch64_shift_truncation_mask): Use aarch64_vector_data_mode_p.
	(aarch64_output_sve_mov_immediate, aarch64_output_ptrue): New
	functions.
	(MAX_VECT_LEN): Delete.
	(expand_vec_perm_d): Add a vec_flags field.
	(emit_unspec2, aarch64_expand_sve_vec_perm): New functions.
	(aarch64_evpc_trn, aarch64_evpc_uzp, aarch64_evpc_zip)
	(aarch64_evpc_ext): Don't apply a big-endian lane correction
	for SVE modes.
	(aarch64_evpc_rev): Rename to...
	(aarch64_evpc_rev_local): ...this.  Use a predicated operation for SVE.
	(aarch64_evpc_rev_global): New function.
	(aarch64_evpc_dup): Enforce a 64-byte range for SVE DUP.
	(aarch64_evpc_tbl): Use MAX_COMPILE_TIME_VEC_BYTES instead of
	MAX_VECT_LEN.
	(aarch64_evpc_sve_tbl): New function.
	(aarch64_expand_vec_perm_const_1): Update after rename of
	aarch64_evpc_rev.  Handle SVE permutes too, trying
	aarch64_evpc_rev_global and using aarch64_evpc_sve_tbl rather
	than aarch64_evpc_tbl.
	(aarch64_vectorize_vec_perm_const): Initialize vec_flags.
	(aarch64_sve_cmp_operand_p, aarch64_unspec_cond_code)
	(aarch64_gen_unspec_cond, aarch64_expand_sve_vec_cmp_int)
	(aarch64_emit_unspec_cond, aarch64_emit_unspec_cond_or)
	(aarch64_emit_inverted_unspec_cond, aarch64_expand_sve_vec_cmp_float)
	(aarch64_expand_sve_vcond): New functions.
	(aarch64_modes_tieable_p): Use aarch64_vector_data_mode_p instead
	of aarch64_vector_mode_p.
	(aarch64_dwarf_poly_indeterminate_value): New function.
	(aarch64_compute_pressure_classes): Likewise.
	(aarch64_can_change_mode_class): Likewise.
	(TARGET_GET_RAW_RESULT_MODE, TARGET_GET_RAW_ARG_MODE): Redefine.
	(TARGET_VECTORIZE_PREFERRED_VECTOR_ALIGNMENT): Likewise.
	(TARGET_VECTORIZE_GET_MASK_MODE): Likewise.
	(TARGET_DWARF_POLY_INDETERMINATE_VALUE): Likewise.
	(TARGET_COMPUTE_PRESSURE_CLASSES): Likewise.
	(TARGET_CAN_CHANGE_MODE_CLASS): Likewise.
	* config/aarch64/constraints.md (Upa, Upl, Uav, Uat, Usv, Usi, Utr)
	(Uty, Dm, vsa, vsc, vsd, vsi, vsn, vsl, vsm, vsA, vsM, vsN): New
	constraints.
	(Dn, Dl, Dr): Accept const as well as const_vector.
	(Dz): Likewise.  Compare against CONST0_RTX.
	* config/aarch64/iterators.md: Refer to "Advanced SIMD" instead
	of "vector" where appropriate.
	(SVE_ALL, SVE_BH, SVE_BHS, SVE_BHSI, SVE_HSDI, SVE_HSF, SVE_SD)
	(SVE_SDI, SVE_I, SVE_F, PRED_ALL, PRED_BHS): New mode iterators.
	(UNSPEC_SEL, UNSPEC_ANDF, UNSPEC_IORF, UNSPEC_XORF, UNSPEC_COND_LT)
	(UNSPEC_COND_LE, UNSPEC_COND_EQ, UNSPEC_COND_NE, UNSPEC_COND_GE)
	(UNSPEC_COND_GT, UNSPEC_COND_LO, UNSPEC_COND_LS, UNSPEC_COND_HS)
	(UNSPEC_COND_HI, UNSPEC_COND_UO): New unspecs.
	(Vetype, VEL, Vel, VWIDE, Vwide, vw, vwcore, V_INT_EQUIV)
	(v_int_equiv): Extend to SVE modes.
	(Vesize, V128, v128, Vewtype, V_FP_EQUIV, v_fp_equiv, VPRED): New
	mode attributes.
	(LOGICAL_OR, SVE_INT_UNARY, SVE_FP_UNARY): New code iterators.
	(optab): Handle popcount, smin, smax, umin, umax, abs and sqrt.
	(logical_nn, lr, sve_int_op, sve_fp_op): New code attributs.
	(LOGICALF, OPTAB_PERMUTE, UNPACK, UNPACK_UNSIGNED, SVE_COND_INT_CMP)
	(SVE_COND_FP_CMP): New int iterators.
	(perm_hilo): Handle the new unpack unspecs.
	(optab, logicalf_op, su, perm_optab, cmp_op, imm_con): New int
	attributes.
	* config/aarch64/predicates.md (aarch64_sve_cnt_immediate)
	(aarch64_sve_addvl_addpl_immediate, aarch64_split_add_offset_immediate)
	(aarch64_pluslong_or_poly_operand, aarch64_nonmemory_operand)
	(aarch64_equality_operator, aarch64_constant_vector_operand)
	(aarch64_sve_ld1r_operand, aarch64_sve_ldr_operand): New predicates.
	(aarch64_sve_nonimmediate_operand): Likewise.
	(aarch64_sve_general_operand): Likewise.
	(aarch64_sve_dup_operand, aarch64_sve_arith_immediate): Likewise.
	(aarch64_sve_sub_arith_immediate, aarch64_sve_inc_dec_immediate)
	(aarch64_sve_logical_immediate, aarch64_sve_mul_immediate): Likewise.
	(aarch64_sve_dup_immediate, aarch64_sve_cmp_vsc_immediate): Likewise.
	(aarch64_sve_cmp_vsd_immediate, aarch64_sve_index_immediate): Likewise.
	(aarch64_sve_float_arith_immediate): Likewise.
	(aarch64_sve_float_arith_with_sub_immediate): Likewise.
	(aarch64_sve_float_mul_immediate, aarch64_sve_arith_operand): Likewise.
	(aarch64_sve_add_operand, aarch64_sve_logical_operand): Likewise.
	(aarch64_sve_lshift_operand, aarch64_sve_rshift_operand): Likewise.
	(aarch64_sve_mul_operand, aarch64_sve_cmp_vsc_operand): Likewise.
	(aarch64_sve_cmp_vsd_operand, aarch64_sve_index_operand): Likewise.
	(aarch64_sve_float_arith_operand): Likewise.
	(aarch64_sve_float_arith_with_sub_operand): Likewise.
	(aarch64_sve_float_mul_operand): Likewise.
	(aarch64_sve_vec_perm_operand): Likewise.
	(aarch64_pluslong_operand): Include aarch64_sve_addvl_addpl_immediate.
	(aarch64_mov_operand): Accept const_poly_int and const_vector.
	(aarch64_simd_lshift_imm, aarch64_simd_rshift_imm): Accept const
	as well as const_vector.
	(aarch64_simd_imm_zero, aarch64_simd_imm_minus_one): Move earlier
	in file.  Use CONST0_RTX and CONSTM1_RTX.
	(aarch64_simd_or_scalar_imm_zero): Likewise.  Add match_codes.
	(aarch64_simd_reg_or_zero): Accept const as well as const_vector.
	Use aarch64_simd_imm_zero.
	* config/aarch64/aarch64-sve.md: New file.
	* config/aarch64/aarch64.md: Include it.
	(VG_REGNUM, P0_REGNUM, P7_REGNUM, P15_REGNUM): New register numbers.
	(UNSPEC_REV, UNSPEC_LD1_SVE, UNSPEC_ST1_SVE, UNSPEC_MERGE_PTRUE)
	(UNSPEC_PTEST_PTRUE, UNSPEC_UNPACKSHI, UNSPEC_UNPACKUHI)
	(UNSPEC_UNPACKSLO, UNSPEC_UNPACKULO, UNSPEC_PACK)
	(UNSPEC_FLOAT_CONVERT, UNSPEC_WHILE_LO): New unspec constants.
	(sve): New attribute.
	(enabled): Disable instructions with the sve attribute unless
	TARGET_SVE.
	(movqi, movhi): Pass CONST_POLY_INT operaneds through
	aarch64_expand_mov_immediate.
	(*mov<mode>_aarch64, *movsi_aarch64, *movdi_aarch64): Handle
	CNT[BHSD] immediates.
	(movti): Split CONST_POLY_INT moves into two halves.
	(add<mode>3): Accept aarch64_pluslong_or_poly_operand.
	Split additions that need a temporary here if the destination
	is the stack pointer.
	(*add<mode>3_aarch64): Handle ADDVL and ADDPL immediates.
	(*add<mode>3_poly_1): New instruction.
	(set_clobber_cc): New expander.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>

	* simplify-rtx.c (simplify_immed_subreg): Add an inner_bytes
	parameter and use it instead of GET_MODE_SIZE (innermode).  Use
	inner_bytes * BITS_PER_UNIT instead of GET_MODE_BITSIZE (innermode).
	Use CEIL (inner_bytes, GET_MODE_UNIT_SIZE (innermode)) instead of
	GET_MODE_NUNITS (innermode).  Also add a first_elem parameter.
	Change innermode from fixed_mode_size to machine_mode.
	(simplify_subreg): Update call accordingly.  Handle a constant-sized
	subreg of a variable-length CONST_VECTOR.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-ssa-address.c (mem_ref_valid_without_offset_p): New function.
	(add_offset_to_base): New function, split out from...
	(create_mem_ref): ...here.  When handling a scale other than 1,
	check first whether the address is valid without the offset.
	Add it into the base if so, leaving the index and scale as-is.

2018-01-12  Jakub Jelinek  <jakub@redhat.com>

	PR c++/83778
	* config/rs6000/rs6000-c.c (altivec_resolve_overloaded_builtin): Call
	fold_for_warn before checking if arg2 is INTEGER_CST.

2018-01-12  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/predicates.md (load_multiple_operation): Delete.
	(store_multiple_operation): Delete.
	* config/rs6000/rs6000-cpus.def (601): Remove MASK_STRING.
	* config/rs6000/rs6000-protos.h (rs6000_output_load_multiple): Delete.
	* config/rs6000/rs6000-string.c (expand_block_move): Delete everything
	guarded by TARGET_STRING.
	(rs6000_output_load_multiple): Delete.
	* config/rs6000/rs6000.c (rs6000_option_override_internal): Delete
	OPTION_MASK_STRING / TARGET_STRING handling.
	(print_operand) <'N', 'O'>: Add comment that these are unused now.
	(const rs6000_opt_masks) <"string">: Change mask to 0.
	* config/rs6000/rs6000.h (TARGET_DEFAULT): Remove MASK_STRING.
	(MASK_STRING): Delete.
	* config/rs6000/rs6000.md (*mov<mode>_string): Delete TARGET_STRING
	parts.  Simplify.
	(load_multiple): Delete.
	(*ldmsi8): Delete.
	(*ldmsi7): Delete.
	(*ldmsi6): Delete.
	(*ldmsi5): Delete.
	(*ldmsi4): Delete.
	(*ldmsi3): Delete.
	(store_multiple): Delete.
	(*stmsi8): Delete.
	(*stmsi7): Delete.
	(*stmsi6): Delete.
	(*stmsi5): Delete.
	(*stmsi4): Delete.
	(*stmsi3): Delete.
	(movmemsi_8reg): Delete.
	(corresponding unnamed define_insn): Delete.
	(movmemsi_6reg): Delete.
	(corresponding unnamed define_insn): Delete.
	(movmemsi_4reg): Delete.
	(corresponding unnamed define_insn): Delete.
	(movmemsi_2reg): Delete.
	(corresponding unnamed define_insn): Delete.
	(movmemsi_1reg): Delete.
	(corresponding unnamed define_insn): Delete.
	* config/rs6000/rs6000.opt (mno-string): New.
	(mstring): Replace by deprecation warning stub.
	* doc/invoke.texi (RS/6000 and PowerPC Options): Delete -mstring.

2018-01-12  Jakub Jelinek  <jakub@redhat.com>

	* regrename.c (regrename_do_replace): If replacing the same
	reg multiple times, try to reuse last created gen_raw_REG.

	PR debug/81155
	* bb-reorder.c (pass_partition_blocks::gate): In lto don't partition
	main to workaround a bug in GDB.

2018-01-12  Tom de Vries  <tom@codesourcery.com>

	PR target/83737
	* config.gcc (nvptx*-*-*): Set use_gcc_stdint=wrap.

2018-01-12  Vladimir Makarov  <vmakarov@redhat.com>

	PR rtl-optimization/80481
	* ira-color.c (get_cap_member): New function.
	(allocnos_conflict_by_live_ranges_p): Use it.
	(slot_coalesced_allocno_live_ranges_intersect_p): Add assert.
	(setup_slot_coalesced_allocno_live_ranges): Ditto.

2018-01-12  Uros Bizjak  <ubizjak@gmail.com>

	PR target/83628
	* config/alpha/alpha.md (*saddsi_1): New insn_ans_split pattern.
	(*saddl_se_1): Ditto.
	(*ssubsi_1): Ditto.
	(*ssubl_se_1): Ditto.

2018-01-12  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-predcom.c (aff_combination_dr_offset): Use wi::to_poly_widest
	rather than wi::to_widest for DR_INITs.
	* tree-vect-data-refs.c (vect_find_same_alignment_drs): Use
	wi::to_poly_offset rather than wi::to_offset for DR_INIT.
	(vect_analyze_data_ref_accesses): Require both DR_INITs to be
	INTEGER_CSTs.
	(vect_analyze_group_access_1): Note that here.

2018-01-12  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-vectorizer.c (get_vec_alignment_for_array_type): Handle
	polynomial type sizes.

2018-01-12  Richard Sandiford  <richard.sandiford@linaro.org>

	* gimplify.c (gimple_add_tmp_var_fn): Allow variables to have a
	poly_uint64 size, rather than requiring an unsigned HOST_WIDE_INT size.
	(gimple_add_tmp_var): Likewise.

2018-01-12  Martin Liska  <mliska@suse.cz>

	* gimple.c (gimple_alloc_counts): Use uint64_t instead of int.
	(gimple_alloc_sizes): Likewise.
	(dump_gimple_statistics): Use PRIu64 in printf format.
	* gimple.h: Change uint64_t to int.

2018-01-12  Martin Liska  <mliska@suse.cz>

	* tree-core.h: Use uint64_t instead of int.
	* tree.c (tree_node_counts): Likewise.
	(tree_node_sizes): Likewise.
	(dump_tree_statistics): Use PRIu64 in printf format.

2018-01-12  Martin Liska  <mliska@suse.cz>

	* Makefile.in: As qsort_chk is implemented in vec.c, add
	vec.o to linkage of gencfn-macros.
	* tree.c (build_new_poly_int_cst): Add CXX_MEM_STAT_INFO as it's
	passing the info to record_node_allocation_statistics.
	(test_vector_cst_patterns): Add CXX_MEM_STAT_INFO to declaration
	and pass the info.
	* ggc-common.c (struct ggc_usage): Add operator== and use
	it in operator< and compare function.
	* mem-stats.h (struct mem_usage): Likewise.
	* vec.c (struct vec_usage): Remove operator< and compare
	function. Can be simply inherited.

2018-01-12  Martin Jambor  <mjambor@suse.cz>

	PR target/81616
	* params.def: New parameter PARAM_AVOID_FMA_MAX_BITS.
	* tree-ssa-math-opts.c: Include domwalk.h.
	(convert_mult_to_fma_1): New function.
	(fma_transformation_info): New type.
	(fma_deferring_state): Likewise.
	(cancel_fma_deferring): New function.
	(result_of_phi): Likewise.
	(last_fma_candidate_feeds_initial_phi): Likewise.
	(convert_mult_to_fma): Added deferring logic, split actual
	transformation to convert_mult_to_fma_1.
	(math_opts_dom_walker): New type.
	(math_opts_dom_walker::after_dom_children): New method, body moved
	here from pass_optimize_widening_mul::execute, added deferring logic
	bits.
	(pass_optimize_widening_mul::execute): Moved most of code to
	math_opts_dom_walker::after_dom_children.
	* config/i386/x86-tune.def (X86_TUNE_AVOID_128FMA_CHAINS): New.
	* config/i386/i386.c (ix86_option_override_internal): Added
	maybe_setting of PARAM_AVOID_FMA_MAX_BITS.

2018-01-12  Richard Biener  <rguenther@suse.de>

	PR debug/83157
	* dwarf2out.c (gen_variable_die): Do not reset old_die for
	inline instance vars.

2018-01-12  Oleg Endo  <olegendo@gcc.gnu.org>

	PR target/81819
	* config/rx/rx.c (rx_is_restricted_memory_address):
	Handle SUBREG case.

2018-01-12  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/80846
	* target.def (split_reduction): New target hook.
	* targhooks.c (default_split_reduction): New function.
	* targhooks.h (default_split_reduction): Declare.
	* tree-vect-loop.c (vect_create_epilog_for_reduction): If the
	target requests first reduce vectors by combining low and high
	parts.
	* tree-vect-stmts.c (vect_gen_perm_mask_any): Adjust.
	(get_vectype_for_scalar_type_and_size): Export.
	* tree-vectorizer.h (get_vectype_for_scalar_type_and_size): Declare.
	* doc/tm.texi.in (TARGET_VECTORIZE_SPLIT_REDUCTION): Document.
	* doc/tm.texi: Regenerate.
	* config/i386/i386.c (ix86_split_reduction): Implement
	TARGET_VECTORIZE_SPLIT_REDUCTION.

2018-01-12  Eric Botcazou  <ebotcazou@adacore.com>

	PR target/83368
	* config/sparc/sparc.h (PIC_OFFSET_TABLE_REGNUM): Set to INVALID_REGNUM
	in PIC mode except for TARGET_VXWORKS_RTP.
	* config/sparc/sparc.c: Include cfgrtl.h.
	(TARGET_INIT_PIC_REG): Define.
	(TARGET_USE_PSEUDO_PIC_REG): Likewise.
	(sparc_pic_register_p): New predicate.
	(sparc_legitimate_address_p): Use it.
	(sparc_legitimize_pic_address): Likewise.
	(sparc_delegitimize_address): Likewise.
	(sparc_mode_dependent_address_p): Likewise.
	(gen_load_pcrel_sym): Remove 4th parameter.
	(load_got_register): Adjust call to above.  Remove obsolete stuff.
	(sparc_expand_prologue): Do not call load_got_register here.
	(sparc_flat_expand_prologue): Likewise.
	(sparc_output_mi_thunk): Set the pic_offset_table_rtx object.
	(sparc_use_pseudo_pic_reg): New function.
	(sparc_init_pic_reg): Likewise.
	* config/sparc/sparc.md (vxworks_load_got): Set the GOT register.
	(builtin_setjmp_receiver): Enable only for TARGET_VXWORKS_RTP.

2018-01-12  Christophe Lyon  <christophe.lyon@linaro.org>

	* doc/sourcebuild.texi (Effective-Target Keywords, Other attributes):
	Add item for branch_cost.

2018-01-12  Eric Botcazou  <ebotcazou@adacore.com>

	PR rtl-optimization/83565
	* rtlanal.c (nonzero_bits1): On WORD_REGISTER_OPERATIONS machines, do
	not extend the result to a larger mode for rotate operations.
	(num_sign_bit_copies1): Likewise.

2018-01-12  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	PR target/40411
	* config/sol2.h (STARTFILE_ARCH_SPEC): Don't use with -shared or
	-symbolic.
	Use values-Xc.o for -pedantic.
	Link with values-xpg4.o for C90, values-xpg6.o otherwise.

2018-01-12  Martin Liska  <mliska@suse.cz>

	PR ipa/83054
	* ipa-devirt.c (final_warning_record::grow_type_warnings):
	New function.
	(possible_polymorphic_call_targets): Use it.
	(ipa_devirt): Likewise.

2018-01-12  Martin Liska  <mliska@suse.cz>

	* profile-count.h (enum profile_quality): Use 0 as invalid
	enum value of profile_quality.

2018-01-12  Chung-Ju Wu  <jasonwucj@gmail.com>

	* doc/invoke.texi (NDS32 Options): Add -mext-perf, -mext-perf2 and
	-mext-string options.

2018-01-12  Richard Biener  <rguenther@suse.de>

	* lto-streamer-out.c (DFS::DFS_write_tree_body): Process
	DECL_DEBUG_EXPR conditional on DECL_HAS_DEBUG_EXPR_P.
	* tree-streamer-in.c (lto_input_ts_decl_common_tree_pointers):
	Likewise.
	* tree-streamer-out.c (write_ts_decl_common_tree_pointers): Likewise.

2018-01-11  Michael Meissner  <meissner@linux.vnet.ibm.com>

	* configure.ac (--with-long-double-format): Add support for the
	configuration option to change the default long double format on
	PowerPC systems.
	* config.gcc (powerpc*-linux*-*): Likewise.
	* configure: Regenerate.
	* config/rs6000/rs6000-c.c (rs6000_cpu_cpp_builtins): If long
	double is IEEE, define __KC__ and __KF__ to allow floatn.h to be
	used without modification.

2018-01-11  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

	* config/rs6000/rs6000-builtin.def (BU_P7_MISC_X): New #define.
	(SPEC_BARRIER): New instantiation of BU_P7_MISC_X.
	* config/rs6000/rs6000.c (rs6000_expand_builtin): Handle
	MISC_BUILTIN_SPEC_BARRIER.
	(rs6000_init_builtins): Likewise.
	* config/rs6000/rs6000.md (UNSPECV_SPEC_BARRIER): New UNSPECV
	enum value.
	(speculation_barrier): New define_insn.
	* doc/extend.texi: Document __builtin_speculation_barrier.

2018-01-11  Jakub Jelinek  <jakub@redhat.com>

	PR target/83203
	* config/i386/i386.c (ix86_expand_vector_init_one_nonzero): If one_var
	is 0, for V{8,16}S[IF] and V[48]D[IF]mode use gen_vec_set<mode>_0.
	* config/i386/sse.md (VI8_AVX_AVX512F, VI4F_256_512): New mode
	iterators.
	(ssescalarmodesuffix): Add 512-bit vectors.  Use "d" or "q" for
	integral modes instead of "ss" and "sd".
	(vec_set<mode>_0): New define_insns for 256-bit and 512-bit
	vectors with 32-bit and 64-bit elements.
	(vecdupssescalarmodesuffix): New mode attribute.
	(vec_dup<mode>): Use it.

2018-01-11  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/83330
	* config/i386/i386.c (ix86_compute_frame_layout): Align stack
	frame if argument is passed on stack.

2018-01-11  Jakub Jelinek  <jakub@redhat.com>

	PR target/82682
	* ree.c (combine_reaching_defs): Optimize also
	reg2=exp; reg1=reg2; reg2=any_extend(reg1); into
	reg2=any_extend(exp); reg1=reg2;, formatting fix.

2018-01-11  Jan Hubicka  <hubicka@ucw.cz>

	PR middle-end/83189
	* gimple-ssa-isolate-paths.c (isolate_path): Fix profile update.

2018-01-11  Jan Hubicka  <hubicka@ucw.cz>

	PR middle-end/83718
	* tree-inline.c (copy_cfg_body): Adjust num&den for scaling
	after they are computed.

2018-01-11  Bin Cheng  <bin.cheng@arm.com>

	PR tree-optimization/83695
	* gimple-loop-linterchange.cc
	(tree_loop_interchange::interchange_loops): Call scev_reset_htab to
	reset cached scev information after interchange.
	(pass_linterchange::execute): Remove call to scev_reset_htab.

2018-01-11  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/arm/arm_neon.h (vfmlal_lane_low_u32, vfmlal_lane_high_u32,
	vfmlalq_laneq_low_u32, vfmlalq_lane_low_u32, vfmlal_laneq_low_u32,
	vfmlalq_laneq_high_u32, vfmlalq_lane_high_u32, vfmlal_laneq_high_u32,
	vfmlsl_lane_low_u32, vfmlsl_lane_high_u32, vfmlslq_laneq_low_u32,
	vfmlslq_lane_low_u32, vfmlsl_laneq_low_u32, vfmlslq_laneq_high_u32,
	vfmlslq_lane_high_u32, vfmlsl_laneq_high_u32): Define.
	* config/arm/arm_neon_builtins.def (vfmal_lane_low,
	vfmal_lane_lowv4hf, vfmal_lane_lowv8hf, vfmal_lane_high,
	vfmal_lane_highv4hf, vfmal_lane_highv8hf, vfmsl_lane_low,
	vfmsl_lane_lowv4hf, vfmsl_lane_lowv8hf, vfmsl_lane_high,
	vfmsl_lane_highv4hf, vfmsl_lane_highv8hf): New sets of builtins.
	* config/arm/iterators.md (VFMLSEL2, vfmlsel2): New mode attributes.
	(V_lane_reg): Likewise.
	* config/arm/neon.md (neon_vfm<vfml_op>l_lane_<vfml_half><VCVTF:mode>):
	New define_expand.
	(neon_vfm<vfml_op>l_lane_<vfml_half><vfmlsel2><mode>): Likewise.
	(vfmal_lane_low<mode>_intrinsic,
	vfmal_lane_low<vfmlsel2><mode>_intrinsic,
	vfmal_lane_high<vfmlsel2><mode>_intrinsic,
	vfmal_lane_high<mode>_intrinsic, vfmsl_lane_low<mode>_intrinsic,
	vfmsl_lane_low<vfmlsel2><mode>_intrinsic,
	vfmsl_lane_high<vfmlsel2><mode>_intrinsic,
	vfmsl_lane_high<mode>_intrinsic): New define_insns.

2018-01-11  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/arm/arm-cpus.in (fp16fml): New feature.
	(ALL_SIMD): Add fp16fml.
	(armv8.2-a): Add fp16fml as an option.
	(armv8.3-a): Likewise.
	(armv8.4-a): Add fp16fml as part of fp16.
	* config/arm/arm.h (TARGET_FP16FML): Define.
	* config/arm/arm-c.c (arm_cpu_builtins): Define __ARM_FEATURE_FP16_FML
	when appropriate.
	* config/arm/arm-modes.def (V2HF): Define.
	* config/arm/arm_neon.h (vfmlal_low_u32, vfmlsl_low_u32,
	vfmlal_high_u32, vfmlsl_high_u32, vfmlalq_low_u32,
	vfmlslq_low_u32, vfmlalq_high_u32, vfmlslq_high_u32): Define.
	* config/arm/arm_neon_builtins.def (vfmal_low, vfmal_high,
	vfmsl_low, vfmsl_high): New set of builtins.
	* config/arm/iterators.md (PLUSMINUS): New code iterator.
	(vfml_op): New code attribute.
	(VFMLHALVES): New int iterator.
	(VFML, VFMLSEL): New mode attributes.
	(V_reg): Define mapping for V2HF.
	(V_hi, V_lo): New mode attributes.
	(VF_constraint): Likewise.
	(vfml_half, vfml_half_selector): New int attributes.
	* config/arm/neon.md (neon_vfm<vfml_op>l_<vfml_half><mode>): New
	define_expand.
	(vfmal_low<mode>_intrinsic, vfmsl_high<mode>_intrinsic,
	vfmal_high<mode>_intrinsic, vfmsl_low<mode>_intrinsic):
	New define_insn.
	* config/arm/t-arm-elf (v8_fps): Add fp16fml.
	* config/arm/t-multilib (v8_2_a_simd_variants): Add fp16fml.
	* config/arm/unspecs.md (UNSPEC_VFML_LO, UNSPEC_VFML_HI): New unspecs.
	* doc/invoke.texi (ARM Options): Document fp16fml.  Update armv8.4-a
	documentation.
	* doc/sourcebuild.texi (arm_fp16fml_neon_ok, arm_fp16fml_neon):
	Document new effective target and option set.

2017-01-11  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/arm/arm-cpus.in (armv8_4): New feature.
	(ARMv8_4a): New fgroup.
	(armv8.4-a): New arch.
	* config/arm/arm-tables.opt: Regenerate.
	* config/arm/t-aprofile: Add matching rules for -march=armv8.4-a.
	* config/arm/t-arm-elf (all_v8_archs): Add armv8.4-a.
	* config/arm/t-multilib (v8_4_a_simd_variants): New variable.
	Add matching rules for -march=armv8.4-a and extensions.
	* doc/invoke.texi (ARM Options): Document -march=armv8.4-a.

2018-01-11  Oleg Endo  <olegendo@gcc.gnu.org>

	PR target/81821
	* config/rx/rx.md (BW): New mode attribute.
	(sync_lock_test_and_setsi): Add mode suffix to insn output.

2018-01-11  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/83435
	* graphite.c (canonicalize_loop_form): Ignore fake loop exit edges.
	* graphite-scop-detection.c (scop_detection::get_sese): Likewise.
	* tree-vrp.c (add_assert_info): Drop TREE_OVERFLOW if they appear.

2018-01-11  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* config/aarch64/aarch64.c (aarch64_address_info): Add a const_offset
	field.
	(aarch64_classify_address): Initialize it.  Track polynomial offsets.
	(aarch64_print_address_internal): Use it to check for a zero offset.

2018-01-11  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* config/aarch64/aarch64-modes.def (NUM_POLY_INT_COEFFS): Set to 2.
	* config/aarch64/aarch64-protos.h (aarch64_initial_elimination_offset):
	Return a poly_int64 rather than a HOST_WIDE_INT.
	(aarch64_offset_7bit_signed_scaled_p): Take the offset as a poly_int64
	rather than a HOST_WIDE_INT.
	* config/aarch64/aarch64.h (aarch64_frame): Protect with
	HAVE_POLY_INT_H rather than HOST_WIDE_INT.  Change locals_offset,
	hard_fp_offset, frame_size, initial_adjust, callee_offset and
	final_offset from HOST_WIDE_INT to poly_int64.
	* config/aarch64/aarch64-builtins.c (aarch64_simd_expand_args): Use
	to_constant when getting the number of units in an Advanced SIMD
	mode.
	(aarch64_builtin_vectorized_function): Check for a constant number
	of units.
	* config/aarch64/aarch64-simd.md (mov<mode>): Handle polynomial
	GET_MODE_SIZE.
	(aarch64_ld<VSTRUCT:nregs>_lane<VALLDIF:mode>): Use the nunits
	attribute instead of GET_MODE_NUNITS.
	* config/aarch64/aarch64.c (aarch64_hard_regno_nregs)
	(aarch64_class_max_nregs): Use the constant_lowest_bound of the
	GET_MODE_SIZE for fixed-size registers.
	(aarch64_const_vec_all_same_in_range_p): Use const_vec_duplicate_p.
	(aarch64_hard_regno_call_part_clobbered, aarch64_classify_index)
	(aarch64_mode_valid_for_sched_fusion_p, aarch64_classify_address)
	(aarch64_legitimize_address_displacement, aarch64_secondary_reload)
	(aarch64_print_operand, aarch64_print_address_internal)
	(aarch64_address_cost, aarch64_rtx_costs, aarch64_register_move_cost)
	(aarch64_short_vector_p, aapcs_vfp_sub_candidate)
	(aarch64_simd_attr_length_rglist, aarch64_operands_ok_for_ldpstp):
	Handle polynomial GET_MODE_SIZE.
	(aarch64_hard_regno_caller_save_mode): Likewise.  Return modes
	wider than SImode without modification.
	(tls_symbolic_operand_type): Use strip_offset instead of split_const.
	(aarch64_pass_by_reference, aarch64_layout_arg, aarch64_pad_reg_upward)
	(aarch64_gimplify_va_arg_expr): Assert that we don't yet handle
	passing and returning SVE modes.
	(aarch64_function_value, aarch64_layout_arg): Use gen_int_mode
	rather than GEN_INT.
	(aarch64_emit_probe_stack_range): Take the size as a poly_int64
	rather than a HOST_WIDE_INT, but call sorry if it isn't constant.
	(aarch64_allocate_and_probe_stack_space): Likewise.
	(aarch64_layout_frame): Cope with polynomial offsets.
	(aarch64_save_callee_saves, aarch64_restore_callee_saves): Take the
	start_offset as a poly_int64 rather than a HOST_WIDE_INT.  Track
	polynomial offsets.
	(offset_9bit_signed_unscaled_p, offset_12bit_unsigned_scaled_p)
	(aarch64_offset_7bit_signed_scaled_p): Take the offset as a
	poly_int64 rather than a HOST_WIDE_INT.
	(aarch64_get_separate_components, aarch64_process_components)
	(aarch64_expand_prologue, aarch64_expand_epilogue)
	(aarch64_use_return_insn_p): Handle polynomial frame offsets.
	(aarch64_anchor_offset): New function, split out from...
	(aarch64_legitimize_address): ...here.
	(aarch64_builtin_vectorization_cost): Handle polynomial
	TYPE_VECTOR_SUBPARTS.
	(aarch64_simd_check_vect_par_cnst_half): Handle polynomial
	GET_MODE_NUNITS.
	(aarch64_simd_make_constant, aarch64_expand_vector_init): Get the
	number of elements from the PARALLEL rather than the mode.
	(aarch64_shift_truncation_mask): Use GET_MODE_UNIT_BITSIZE
	rather than GET_MODE_BITSIZE.
	(aarch64_evpc_trn, aarch64_evpc_uzp, aarch64_evpc_ext)
	(aarch64_evpc_rev, aarch64_evpc_dup, aarch64_evpc_zip)
	(aarch64_expand_vec_perm_const_1): Handle polynomial
	d->perm.length () and d->perm elements.
	(aarch64_evpc_tbl): Likewise.  Use nelt rather than GET_MODE_NUNITS.
	Apply to_constant to d->perm elements.
	(aarch64_simd_valid_immediate, aarch64_vec_fpconst_pow_of_2): Handle
	polynomial CONST_VECTOR_NUNITS.
	(aarch64_move_pointer): Take amount as a poly_int64 rather
	than an int.
	(aarch64_progress_pointer): Avoid temporary variable.
	* config/aarch64/aarch64.md (aarch64_<crc_variant>): Use
	the mode attribute instead of GET_MODE.

2018-01-11  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* config/aarch64/aarch64.c (aarch64_force_temporary): Assert that
	x exists before using it.
	(aarch64_add_constant_internal): Rename to...
	(aarch64_add_offset_1): ...this.  Replace regnum with separate
	src and dest rtxes.  Handle the case in which they're different,
	including when the offset is zero.  Replace scratchreg with an rtx.
	Use 2 additions if there is no spare register into which we can
	move a 16-bit constant.
	(aarch64_add_constant): Delete.
	(aarch64_add_offset): Replace reg with separate src and dest
	rtxes.  Take a poly_int64 offset instead of a HOST_WIDE_INT.
	Use aarch64_add_offset_1.
	(aarch64_add_sp, aarch64_sub_sp): Take the scratch register as
	an rtx rather than an int.  Take the delta as a poly_int64
	rather than a HOST_WIDE_INT.  Use aarch64_add_offset.
	(aarch64_expand_mov_immediate): Update uses of aarch64_add_offset.
	(aarch64_expand_prologue): Update calls to aarch64_sub_sp,
	aarch64_allocate_and_probe_stack_space and aarch64_add_offset.
	(aarch64_expand_epilogue): Update calls to aarch64_add_offset
	and aarch64_add_sp.
	(aarch64_output_mi_thunk): Use aarch64_add_offset rather than
	aarch64_add_constant.

2018-01-11  Richard Sandiford  <richard.sandiford@linaro.org>

	* config/aarch64/aarch64.c (aarch64_reinterpret_float_as_int):
	Use scalar_float_mode.

2018-01-11  Richard Sandiford  <richard.sandiford@linaro.org>

	* config/aarch64/aarch64-simd.md
	(aarch64_fml<f16mac1>l<f16quad>_low<mode>): Avoid GET_MODE_NUNITS.
	(aarch64_fml<f16mac1>l<f16quad>_high<mode>): Likewise.
	(aarch64_fml<f16mac1>l_lane_lowv2sf): Likewise.
	(aarch64_fml<f16mac1>l_lane_highv2sf): Likewise.
	(aarch64_fml<f16mac1>lq_laneq_lowv4sf): Likewise.
	(aarch64_fml<f16mac1>lq_laneq_highv4sf): Likewise.
	(aarch64_fml<f16mac1>l_laneq_lowv2sf): Likewise.
	(aarch64_fml<f16mac1>l_laneq_highv2sf): Likewise.
	(aarch64_fml<f16mac1>lq_lane_lowv4sf): Likewise.
	(aarch64_fml<f16mac1>lq_lane_highv4sf): Likewise.

2018-01-11  Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	PR target/83514
	* config/arm/arm.c (arm_declare_function_name): Set arch_to_print if
	targ_options->x_arm_arch_string is non NULL.

2018-01-11  Tamar Christina  <tamar.christina@arm.com>

	* config/aarch64/aarch64.h
	(AARCH64_FL_FOR_ARCH8_4): Add  AARCH64_FL_DOTPROD.

2018-01-11  Sudakshina Das  <sudi.das@arm.com>

	PR target/82096
	* expmed.c (emit_store_flag_force): Swap if const op0
	and change VOIDmode to mode of op0.

2018-01-11  Richard Sandiford  <richard.sandiford@linaro.org>

	PR rtl-optimization/83761
	* caller-save.c (replace_reg_with_saved_mem): Pass bits rather
	than bytes to mode_for_size.

2018-01-10  Jan Hubicka  <hubicka@ucw.cz>

	PR middle-end/83189
	* gfortran.fortran-torture/compile/pr83189.f90: New testcase.
	* tree-ssa-loop-manip.c (tree_transform_and_unroll_loop): Handle zero
	profile.

2018-01-10  Jan Hubicka  <hubicka@ucw.cz>

	PR middle-end/83575
	* cfgrtl.c (rtl_verify_edges): Only verify fixability of partition
	when in layout mode.
	(cfg_layout_finalize): Do not verify cfg before we are out of layout.
	* cfgcleanup.c (try_optimize_cfg): Only verify flow info when doing
	partition fixup.

2018-01-10  Michael Collison  <michael.collison@arm.com>

	* config/aarch64/aarch64-modes.def (V2HF): New VECTOR_MODE.
	* config/aarch64/aarch64-option-extension.def: Add
	AARCH64_OPT_EXTENSION of 'fp16fml'.
	* config/aarch64/aarch64-c.c (aarch64_update_cpp_builtins):
	(__ARM_FEATURE_FP16_FML): Define if TARGET_F16FML is true.
	* config/aarch64/predicates.md (aarch64_lane_imm3): New predicate.
	* config/aarch64/constraints.md (Ui7): New constraint.
	* config/aarch64/iterators.md (VFMLA_W): New mode iterator.
	(VFMLA_SEL_W): Ditto.
	(f16quad): Ditto.
	(f16mac1): Ditto.
	(VFMLA16_LOW): New int iterator.
	(VFMLA16_HIGH): Ditto.
	(UNSPEC_FMLAL): New unspec.
	(UNSPEC_FMLSL): Ditto.
	(UNSPEC_FMLAL2): Ditto.
	(UNSPEC_FMLSL2): Ditto.
	(f16mac): New code attribute.
	* config/aarch64/aarch64-simd-builtins.def
	(aarch64_fmlal_lowv2sf): Ditto.
	(aarch64_fmlsl_lowv2sf): Ditto.
	(aarch64_fmlalq_lowv4sf): Ditto.
	(aarch64_fmlslq_lowv4sf): Ditto.
	(aarch64_fmlal_highv2sf): Ditto.
	(aarch64_fmlsl_highv2sf): Ditto.
	(aarch64_fmlalq_highv4sf): Ditto.
	(aarch64_fmlslq_highv4sf): Ditto.
	(aarch64_fmlal_lane_lowv2sf): Ditto.
	(aarch64_fmlsl_lane_lowv2sf): Ditto.
	(aarch64_fmlal_laneq_lowv2sf): Ditto.
	(aarch64_fmlsl_laneq_lowv2sf): Ditto.
	(aarch64_fmlalq_lane_lowv4sf): Ditto.
	(aarch64_fmlsl_lane_lowv4sf): Ditto.
	(aarch64_fmlalq_laneq_lowv4sf): Ditto.
	(aarch64_fmlsl_laneq_lowv4sf): Ditto.
	(aarch64_fmlal_lane_highv2sf): Ditto.
	(aarch64_fmlsl_lane_highv2sf): Ditto.
	(aarch64_fmlal_laneq_highv2sf): Ditto.
	(aarch64_fmlsl_laneq_highv2sf): Ditto.
	(aarch64_fmlalq_lane_highv4sf): Ditto.
	(aarch64_fmlsl_lane_highv4sf): Ditto.
	(aarch64_fmlalq_laneq_highv4sf): Ditto.
	(aarch64_fmlsl_laneq_highv4sf): Ditto.
	* config/aarch64/aarch64-simd.md:
	(aarch64_fml<f16mac1>l<f16quad>_low<mode>): New pattern.
	(aarch64_fml<f16mac1>l<f16quad>_high<mode>): Ditto.
	(aarch64_simd_fml<f16mac1>l<f16quad>_low<mode>): Ditto.
	(aarch64_simd_fml<f16mac1>l<f16quad>_high<mode>): Ditto.
	(aarch64_fml<f16mac1>l_lane_lowv2sf): Ditto.
	(aarch64_fml<f16mac1>l_lane_highv2sf): Ditto.
	(aarch64_simd_fml<f16mac>l_lane_lowv2sf): Ditto.
	(aarch64_simd_fml<f16mac>l_lane_highv2sf): Ditto.
	(aarch64_fml<f16mac1>lq_laneq_lowv4sf): Ditto.
	(aarch64_fml<f16mac1>lq_laneq_highv4sf): Ditto.
	(aarch64_simd_fml<f16mac>lq_laneq_lowv4sf): Ditto.
	(aarch64_simd_fml<f16mac>lq_laneq_highv4sf): Ditto.
	(aarch64_fml<f16mac1>l_laneq_lowv2sf): Ditto.
	(aarch64_fml<f16mac1>l_laneq_highv2sf): Ditto.
	(aarch64_simd_fml<f16mac>l_laneq_lowv2sf): Ditto.
	(aarch64_simd_fml<f16mac>l_laneq_highv2sf): Ditto.
	(aarch64_fml<f16mac1>lq_lane_lowv4sf): Ditto.
	(aarch64_fml<f16mac1>lq_lane_highv4sf): Ditto.
	(aarch64_simd_fml<f16mac>lq_lane_lowv4sf): Ditto.
	(aarch64_simd_fml<f16mac>lq_lane_highv4sf): Ditto.
	* config/aarch64/arm_neon.h (vfmlal_low_u32): New intrinsic.
	(vfmlsl_low_u32): Ditto.
	(vfmlalq_low_u32): Ditto.
	(vfmlslq_low_u32): Ditto.
	(vfmlal_high_u32): Ditto.
	(vfmlsl_high_u32): Ditto.
	(vfmlalq_high_u32): Ditto.
	(vfmlslq_high_u32): Ditto.
	(vfmlal_lane_low_u32): Ditto.
	(vfmlsl_lane_low_u32): Ditto.
	(vfmlal_laneq_low_u32): Ditto.
	(vfmlsl_laneq_low_u32): Ditto.
	(vfmlalq_lane_low_u32): Ditto.
	(vfmlslq_lane_low_u32): Ditto.
	(vfmlalq_laneq_low_u32): Ditto.
	(vfmlslq_laneq_low_u32): Ditto.
	(vfmlal_lane_high_u32): Ditto.
	(vfmlsl_lane_high_u32): Ditto.
	(vfmlal_laneq_high_u32): Ditto.
	(vfmlsl_laneq_high_u32): Ditto.
	(vfmlalq_lane_high_u32): Ditto.
	(vfmlslq_lane_high_u32): Ditto.
	(vfmlalq_laneq_high_u32): Ditto.
	(vfmlslq_laneq_high_u32): Ditto.
	* config/aarch64/aarch64.h (AARCH64_FL_F16SML): New flag.
	(AARCH64_FL_FOR_ARCH8_4): New.
	(AARCH64_ISA_F16FML): New ISA flag.
	(TARGET_F16FML): New feature flag for fp16fml.
	(doc/invoke.texi): Document new fp16fml option.

2018-01-10  Michael Collison  <michael.collison@arm.com>

	* config/aarch64/aarch64-builtins.c:
	(aarch64_types_ternopu_imm_qualifiers, TYPES_TERNOPUI): New.
	* config/aarch64/aarch64-c.c (aarch64_update_cpp_builtins):
	(__ARM_FEATURE_SHA3): Define if TARGET_SHA3 is true.
	* config/aarch64/aarch64.h (AARCH64_FL_SHA3): New flags.
	(AARCH64_ISA_SHA3): New ISA flag.
	(TARGET_SHA3): New feature flag for sha3.
	* config/aarch64/iterators.md (sha512_op): New int attribute.
	(CRYPTO_SHA512): New int iterator.
	(UNSPEC_SHA512H): New unspec.
	(UNSPEC_SHA512H2): Ditto.
	(UNSPEC_SHA512SU0): Ditto.
	(UNSPEC_SHA512SU1): Ditto.
	* config/aarch64/aarch64-simd-builtins.def
	(aarch64_crypto_sha512hqv2di): New builtin.
	(aarch64_crypto_sha512h2qv2di): Ditto.
	(aarch64_crypto_sha512su0qv2di): Ditto.
	(aarch64_crypto_sha512su1qv2di): Ditto.
	(aarch64_eor3qv8hi): Ditto.
	(aarch64_rax1qv2di): Ditto.
	(aarch64_xarqv2di): Ditto.
	(aarch64_bcaxqv8hi): Ditto.
	* config/aarch64/aarch64-simd.md:
	(aarch64_crypto_sha512h<sha512_op>qv2di): New pattern.
	(aarch64_crypto_sha512su0qv2di): Ditto.
	(aarch64_crypto_sha512su1qv2di): Ditto.
	(aarch64_eor3qv8hi): Ditto.
	(aarch64_rax1qv2di): Ditto.
	(aarch64_xarqv2di): Ditto.
	(aarch64_bcaxqv8hi): Ditto.
	* config/aarch64/arm_neon.h (vsha512hq_u64): New intrinsic.
	(vsha512h2q_u64): Ditto.
	(vsha512su0q_u64): Ditto.
	(vsha512su1q_u64): Ditto.
	(veor3q_u16): Ditto.
	(vrax1q_u64): Ditto.
	(vxarq_u64): Ditto.
	(vbcaxq_u16): Ditto.
	* config/arm/types.md (crypto_sha512): New type attribute.
	(crypto_sha3): Ditto.
	(doc/invoke.texi): Document new sha3 option.

2018-01-10  Michael Collison  <michael.collison@arm.com>

	* config/aarch64/aarch64-builtins.c:
	(aarch64_types_quadopu_imm_qualifiers, TYPES_QUADOPUI): New.
	* config/aarch64/aarch64-c.c (aarch64_update_cpp_builtins):
	(__ARM_FEATURE_SM3): Define if TARGET_SM4 is true.
	(__ARM_FEATURE_SM4): Define if TARGET_SM4 is true.
	* config/aarch64/aarch64.h (AARCH64_FL_SM4): New flags.
	(AARCH64_ISA_SM4): New ISA flag.
	(TARGET_SM4): New feature flag for sm4.
	* config/aarch64/aarch64-simd-builtins.def
	(aarch64_sm3ss1qv4si): Ditto.
	(aarch64_sm3tt1aq4si): Ditto.
	(aarch64_sm3tt1bq4si): Ditto.
	(aarch64_sm3tt2aq4si): Ditto.
	(aarch64_sm3tt2bq4si): Ditto.
	(aarch64_sm3partw1qv4si): Ditto.
	(aarch64_sm3partw2qv4si): Ditto.
	(aarch64_sm4eqv4si): Ditto.
	(aarch64_sm4ekeyqv4si): Ditto.
	* config/aarch64/aarch64-simd.md:
	(aarch64_sm3ss1qv4si): Ditto.
	(aarch64_sm3tt<sm3tt_op>qv4si): Ditto.
	(aarch64_sm3partw<sm3part_op>qv4si): Ditto.
	(aarch64_sm4eqv4si): Ditto.
	(aarch64_sm4ekeyqv4si): Ditto.
	* config/aarch64/iterators.md (sm3tt_op): New int iterator.
	(sm3part_op): Ditto.
	(CRYPTO_SM3TT): Ditto.
	(CRYPTO_SM3PART): Ditto.
	(UNSPEC_SM3SS1): New unspec.
	(UNSPEC_SM3TT1A): Ditto.
	(UNSPEC_SM3TT1B): Ditto.
	(UNSPEC_SM3TT2A): Ditto.
	(UNSPEC_SM3TT2B): Ditto.
	(UNSPEC_SM3PARTW1): Ditto.
	(UNSPEC_SM3PARTW2): Ditto.
	(UNSPEC_SM4E): Ditto.
	(UNSPEC_SM4EKEY): Ditto.
	* config/aarch64/constraints.md (Ui2): New constraint.
	* config/aarch64/predicates.md (aarch64_imm2): New predicate.
	* config/arm/types.md (crypto_sm3): New type attribute.
	(crypto_sm4): Ditto.
	* config/aarch64/arm_neon.h (vsm3ss1q_u32): New intrinsic.
	(vsm3tt1aq_u32): Ditto.
	(vsm3tt1bq_u32): Ditto.
	(vsm3tt2aq_u32): Ditto.
	(vsm3tt2bq_u32): Ditto.
	(vsm3partw1q_u32): Ditto.
	(vsm3partw2q_u32): Ditto.
	(vsm4eq_u32): Ditto.
	(vsm4ekeyq_u32): Ditto.
	(doc/invoke.texi): Document new sm4 option.

2018-01-10  Michael Collison  <michael.collison@arm.com>

	* config/aarch64/aarch64-arches.def (armv8.4-a): New architecture.
	* config/aarch64/aarch64.h (AARCH64_ISA_V8_4): New ISA flag.
	(AARCH64_FL_FOR_ARCH8_4): New.
	(AARCH64_FL_V8_4): New flag.
	(doc/invoke.texi): Document new armv8.4-a option.

2018-01-10  Michael Collison  <michael.collison@arm.com>

	* config/aarch64/aarch64-c.c (aarch64_update_cpp_builtins):
	(__ARM_FEATURE_AES): Define if TARGET_AES is true.
	(__ARM_FEATURE_SHA2): Define if TARGET_SHA2 is true.
	* config/aarch64/aarch64-option-extension.def: Add
	AARCH64_OPT_EXTENSION of 'sha2'.
	(aes): Add AARCH64_OPT_EXTENSION of 'aes'.
	(crypto): Disable sha2 and aes if crypto disabled.
	(crypto): Enable aes and sha2 if enabled.
	(simd): Disable sha2 and aes if simd disabled.
	* config/aarch64/aarch64.h (AARCH64_FL_AES, AARCH64_FL_SHA2):
	New flags.
	(AARCH64_ISA_AES, AARCH64_ISA_SHA2): New ISA flags.
	(TARGET_SHA2): New feature flag for sha2.
	(TARGET_AES): New feature flag for aes.
	* config/aarch64/aarch64-simd.md:
	(aarch64_crypto_aes<aes_op>v16qi): Make pattern
	conditional on TARGET_AES.
	(aarch64_crypto_aes<aesmc_op>v16qi): Ditto.
	(aarch64_crypto_sha1hsi): Make pattern conditional
	on TARGET_SHA2.
	(aarch64_crypto_sha1hv4si): Ditto.
	(aarch64_be_crypto_sha1hv4si): Ditto.
	(aarch64_crypto_sha1su1v4si): Ditto.
	(aarch64_crypto_sha1<sha1_op>v4si): Ditto.
	(aarch64_crypto_sha1su0v4si): Ditto.
	(aarch64_crypto_sha256h<sha256_op>v4si): Ditto.
	(aarch64_crypto_sha256su0v4si): Ditto.
	(aarch64_crypto_sha256su1v4si): Ditto.
	(doc/invoke.texi): Document new aes and sha2 options.

2018-01-10  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/83781
	* gimple-fold.c (get_range_strlen): Avoid treating arrays of pointers
	as string arrays.

2018-01-11  Martin Sebor  <msebor@gmail.com>
	    Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	PR tree-optimization/83501
	PR tree-optimization/81703

	* tree-ssa-strlen.c (get_string_cst): Rename...
	(get_string_len): ...to this.  Handle global constants.
	(handle_char_store): Adjust.

2018-01-10  Kito Cheng  <kito.cheng@gmail.com>
	    Jim Wilson  <jimw@sifive.com>

	* config/riscv/riscv-protos.h (riscv_output_return): New.
	* config/riscv/riscv.c (struct machine_function): New naked_p field.
	(riscv_attribute_table, riscv_output_return),
	(riscv_handle_fndecl_attribute, riscv_naked_function_p),
	(riscv_allocate_stack_slots_for_args, riscv_warn_func_return): New.
	(riscv_compute_frame_info): Only compute frame->mask if not a naked
	function.
	(riscv_expand_prologue): Add early return for naked function.
	(riscv_expand_epilogue): Likewise.
	(riscv_function_ok_for_sibcall): Return false for naked function.
	(riscv_set_current_function): New.
	(TARGET_SET_CURRENT_FUNCTION, TARGET_ALLOCATE_STACK_SLOTS_FOR_ARGS),
	(TARGET_ATTRIBUTE_TABLE, TARGET_WARN_FUNC_RETURN): New.
	* config/riscv/riscv.md (simple_return): Call riscv_output_return.
	* doc/extend.texi (RISC-V Function Attributes): New.

2018-01-10  Michael Meissner  <meissner@linux.vnet.ibm.com>

	* config/rs6000/rs6000.c (is_complex_IBM_long_double): Explicitly
	check for 128-bit long double before checking TCmode.
	* config/rs6000/rs6000.h (FLOAT128_IEEE_P): Explicitly check for
	128-bit long doubles before checking TFmode or TCmode.
	(FLOAT128_IBM_P): Likewise.

2018-01-10  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/83671
	* builtins.c (c_strlen): Unconditionally return zero for the empty
	string.
	Use -Warray-bounds for warnings.
	* gimple-fold.c (get_range_strlen): Handle non-constant lengths
	for non-constant array indices with COMPONENT_REF, arrays of
	arrays, and pointers to arrays.
	(gimple_fold_builtin_strlen): Determine and set length range for
	non-constant character arrays.

2018-01-10  Aldy Hernandez  <aldyh@redhat.com>

	PR middle-end/81897
	* tree-ssa-uninit.c (convert_control_dep_chain_into_preds): Skip
	empty blocks.

2018-01-10  Eric Botcazou  <ebotcazou@adacore.com>

	* dwarf2out.c (dwarf2out_var_location): Do not pass NULL to fprintf.

2018-01-10  Peter Bergner  <bergner@vnet.ibm.com>

	PR target/83399
	* config/rs6000/rs6000.c (print_operand) <'y'>: Use
	VECTOR_MEM_ALTIVEC_OR_VSX_P.
	* config/rs6000/vsx.md (*vsx_le_perm_load_<mode> for VSX_D): Use
	indexed_or_indirect_operand predicate.
	(*vsx_le_perm_load_<mode> for VSX_W): Likewise.
	(*vsx_le_perm_load_v8hi): Likewise.
	(*vsx_le_perm_load_v16qi): Likewise.
	(*vsx_le_perm_store_<mode> for VSX_D): Likewise.
	(*vsx_le_perm_store_<mode> for VSX_W): Likewise.
	(*vsx_le_perm_store_v8hi): Likewise.
	(*vsx_le_perm_store_v16qi): Likewise.
	(eight unnamed splitters): Likewise.

2018-01-10  Peter Bergner  <bergner@vnet.ibm.com>

	* config/rs6000/x86intrin.h: Change #warning to #error. Update message.
	* config/rs6000/emmintrin.h: Likewise.
	* config/rs6000/mmintrin.h: Likewise.
	* config/rs6000/xmmintrin.h: Likewise.

2018-01-10  David Malcolm  <dmalcolm@redhat.com>

	PR c++/43486
	* tree-core.h: Document EXPR_LOCATION_WRAPPER_P's usage of
	"public_flag".
	* tree.c (tree_nop_conversion): Return true for location wrapper
	nodes.
	(maybe_wrap_with_location): New function.
	(selftest::check_strip_nops): New function.
	(selftest::test_location_wrappers): New function.
	(selftest::tree_c_tests): Call it.
	* tree.h (STRIP_ANY_LOCATION_WRAPPER): New macro.
	(maybe_wrap_with_location): New decl.
	(EXPR_LOCATION_WRAPPER_P): New macro.
	(location_wrapper_p): New inline function.
	(tree_strip_any_location_wrapper): New inline function.

2018-01-10  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/83735
	* config/i386/i386.c (ix86_compute_frame_layout): Always adjust
	stack_realign_offset for the largest alignment of stack slot
	actually used.
	(ix86_find_max_used_stack_alignment): New function.
	(ix86_finalize_stack_frame_flags): Use it.  Set
	max_used_stack_alignment if we don't realign stack.
	* config/i386/i386.h (machine_function): Add
	max_used_stack_alignment.

2018-01-10  Christophe Lyon  <christophe.lyon@linaro.org>

	* config/arm/arm.opt (-mbranch-cost): New option.
	* config/arm/arm.h (BRANCH_COST): Take arm_branch_cost into
	account.

2018-01-10  Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/83629
	* config/rs6000/rs6000.md (load_toc_v4_PIC_2, load_toc_v4_PIC_3b,
	load_toc_v4_PIC_3c): Wrap const term in CONST RTL.

2018-01-10  Richard Biener  <rguenther@suse.de>

	PR debug/83765
	* dwarf2out.c (gen_subprogram_die): Hoist old_die && declaration
	early out so it also covers the case where we have a non-NULL
	origin.

2018-01-10  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/83753
	* tree-vect-stmts.c (get_group_load_store_type): Use VMAT_CONTIGUOUS
	for non-strided grouped accesses if the number of elements is 1.

2018-01-10  Jan Hubicka  <hubicka@ucw.cz>

	PR target/81616
	* i386.c (ix86_vectorize_builtin_gather): Check TARGET_USE_GATHER.
	* i386.h (TARGET_USE_GATHER): Define.
	* x86-tune.def (X86_TUNE_USE_GATHER): New.

2018-01-10  Martin Liska  <mliska@suse.cz>

	PR bootstrap/82831
	* basic-block.h (CLEANUP_NO_PARTITIONING): New define.
	* bb-reorder.c (pass_reorder_blocks::execute): Do not clean up
	partitioning.
	* cfgcleanup.c (try_optimize_cfg): Fix up partitioning if
	CLEANUP_NO_PARTITIONING is not set.

2018-01-10  Richard Sandiford  <richard.sandiford@linaro.org>

	* doc/rtl.texi: Remove documentation of (const ...) wrappers
	for vectors, as a partial revert of r254296.
	* rtl.h (const_vec_p): Delete.
	(const_vec_duplicate_p): Don't test for vector CONSTs.
	(unwrap_const_vec_duplicate, const_vec_series_p): Likewise.
	* expmed.c (make_tree): Likewise.

	Revert:
	* common.md (E, F): Use CONSTANT_P instead of checking for
	CONST_VECTOR.
	* emit-rtl.c (gen_lowpart_common): Use const_vec_p instead of
	checking for CONST_VECTOR.

2018-01-09  Jan Hubicka  <hubicka@ucw.cz>

	PR middle-end/83575
	* predict.c (force_edge_cold): Handle in more sane way edges
	with no prediction.

2018-01-09  Carl Love  <cel@us.ibm.com>

	* config/rs6002/altivec.md (p8_vmrgow): Add support for V2DI, V2DF,
	V4SI, V4SF types.
	(p8_vmrgew): Add support for V2DI, V2DF, V4SF types.
	* config/rs6000/rs6000-builtin.def: Add definitions for FLOAT2_V2DF,
	VMRGEW_V2DI, VMRGEW_V2DF, VMRGEW_V4SF, VMRGOW_V4SI, VMRGOW_V4SF,
	VMRGOW_V2DI, VMRGOW_V2DF.  Remove definition for VMRGOW.
	* config/rs6000/rs6000-c.c (VSX_BUILTIN_VEC_FLOAT2,
	P8V_BUILTIN_VEC_VMRGEW, P8V_BUILTIN_VEC_VMRGOW):  Add definitions.
	* config/rs6000/rs6000-protos.h: Add extern defition for
	rs6000_generate_float2_double_code.
	* config/rs6000/rs6000.c (rs6000_generate_float2_double_code): Add
	function.
	* config/rs6000/vsx.md (vsx_xvcdpsp): Add define_insn.
	(float2_v2df): Add define_expand.

2018-01-09  Uros Bizjak  <ubizjak@gmail.com>

	PR target/83628
	* combine.c (force_int_to_mode) <case ASHIFT>: Use mode instead of
	op_mode in the force_to_mode call.

2018-01-09  Richard Sandiford  <richard.sandiford@linaro.org>

	* config/aarch64/aarch64.c (aarch64_evpc_trn): Use d.perm.series_p
	instead of checking each element individually.
	(aarch64_evpc_uzp): Likewise.
	(aarch64_evpc_zip): Likewise.
	(aarch64_evpc_ext): Likewise.
	(aarch64_evpc_rev): Likewise.
	(aarch64_evpc_dup): Test the encoding for a single duplicated element,
	instead of checking each element individually.  Return true without
	generating rtl if
	(aarch64_vectorize_vec_perm_const): Use all_from_input_p to test
	whether all selected elements come from the same input, instead of
	checking each element individually.  Remove calls to gen_rtx_REG,
	start_sequence and end_sequence and instead assert that no rtl is
	generated.

2018-01-09  Richard Sandiford  <richard.sandiford@linaro.org>

	* config/aarch64/aarch64.c (aarch64_legitimate_constant_p): Fix
	order of HIGH and CONST checks.

2018-01-09  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-vect-stmts.c (permute_vec_elements): Create a fresh variable
	if the destination isn't an SSA_NAME.

2018-01-09  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/83668
	* graphite.c (canonicalize_loop_closed_ssa): Add edge argument,
	move prologue...
	(canonicalize_loop_form): ... here, renamed from ...
	(canonicalize_loop_closed_ssa_form): ... this and amended to
	swap successor edges for loop exit blocks to make us use
	the RPO order we need for initial schedule generation.

2018-01-09  Joseph Myers  <joseph@codesourcery.com>

	PR tree-optimization/64811
	* match.pd: When optimizing comparisons with Inf, avoid
	introducing or losing exceptions from comparisons with NaN.

2018-01-09  Martin Liska  <mliska@suse.cz>

	PR sanitizer/82517
	* asan.c (shadow_mem_size): Add gcc_assert.

2018-01-09  Georg-Johann Lay  <avr@gjlay.de>

	Don't save registers in main().

	PR target/83738
	* doc/invoke.texi (AVR Options) [-mmain-is-OS_task]: Document it.
	* config/avr/avr.opt (-mmain-is-OS_task): New target option.
	* config/avr/avr.c (avr_set_current_function): Don't error if
	naked, OS_task or OS_main are specified at the same time.
	(avr_function_ok_for_sibcall): Don't disable sibcalls for OS_task,
	OS_main.
	(avr_insert_attributes) [-mmain-is-OS_task] <main>: Add OS_task
	attribute.
	* common/config/avr/avr-common.c (avr_option_optimization_table):
	Switch on -mmain-is-OS_task for optimizing compilations.

2018-01-09  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/83572
	* graphite.c: Include cfganal.h.
	(graphite_transform_loops): Connect infinite loops to exit
	and remove fake edges at the end.

2018-01-09  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-inline.c (edge_badness): Revert accidental checkin.

2018-01-09  Jan Hubicka  <hubicka@ucw.cz>

	PR ipa/80763
	* ipa-comdats.c (set_comdat_group): Only set comdat group of real
	symbols; not inline clones.

2018-01-09  Jakub Jelinek  <jakub@redhat.com>

	PR target/83507
	* modulo-sched.c (schedule_reg_moves): Punt if we'd need to move
	hard registers.  Formatting fixes.

	PR preprocessor/83722
	* gcc.c (try_generate_repro): Pass
	&temp_stderr_files[RETRY_ICE_ATTEMPTS - 1] rather than
	&temp_stdout_files[RETRY_ICE_ATTEMPTS - 1] as last argument to
	do_report_bug.

2018-01-08  Monk Chiang  <sh.chiang04@gmail.com>
	    Kito Cheng  <kito.cheng@gmail.com>

	* config/riscv/riscv.c (machine_function::is_leaf): Remove field.
	(riscv_leaf_function_p): Delete.
	(riscv_function_ok_for_sibcall): Return false when TARGET_SAVE_RESTORE.

2018-01-08  Aaron Sawdey  <acsawdey@linux.vnet.ibm.com>

	* config/rs6000/rs6000-string.c (do_load_for_compare_from_addr): New
	function.
	(do_ifelse): New function.
	(do_isel): New function.
	(do_sub3): New function.
	(do_add3): New function.
	(do_load_mask_compare): New function.
	(do_overlap_load_compare): New function.
	(expand_compare_loop): New function.
	(expand_block_compare): Call expand_compare_loop() when appropriate.
	* config/rs6000/rs6000.opt (-mblock-compare-inline-limit): Change
	option description.
	(-mblock-compare-inline-loop-limit): New option.

2018-01-08  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

	PR target/83677
	* config/rs6000/altivec.md (*altivec_vpermr_<mode>_internal):
	Reverse order of second and third operands in first alternative.
	* config/rs6000/rs6000.c (rs6000_expand_vector_set): Reverse order
	of first and second elements in UNSPEC_VPERMR vector.
	(altivec_expand_vec_perm_le): Likewise.

2017-01-08  Jeff Law  <law@redhat.com>

	PR rtl-optimizatin/81308
	* tree-switch-conversion.c (cfg_altered): New file scoped static.
	(process_switch): If group_case_labels makes a change, then set
	cfg_altered.
	(pass_convert_switch::execute): If a switch is converted, then
	set cfg_altered.  Return TODO_cfg_cleanup if cfg_altered is true.

	PR rtl-optimization/81308
	* recog.c (split_all_insns): Conditionally cleanup the CFG after
	splitting insns.

2018-01-08  Vidya Praveen  <vidyapraveen@arm.com>

	PR target/83663 - Revert r255946
	* config/aarch64/aarch64.c (aarch64_expand_vector_init): Modify code
	generation for cases where splatting a value is not useful.
	* simplify-rtx.c (simplify_ternary_operation): Simplify vec_merge
	across a vec_duplicate and a paradoxical subreg forming a vector
	mode to a vec_concat.

2018-01-08  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/arm/t-aprofile (MULTILIB_MATCHES): Add mapping rules for
	-march=armv8.3-a variants.
	* config/arm/t-multilib: Likewise.
	* config/arm/t-arm-elf: Likewise.  Handle dotprod extension.

2018-01-08  Aaron Sawdey  <acsawdey@linux.vnet.ibm.com>

	* config/rs6000/rs6000.md (cceq_ior_compare): Remove * so I can use it
	to generate rtl.
	(cceq_ior_compare_complement): Give it a name so I can use it, and
	change boolean_or_operator predicate to boolean_operator so it can
	be used to generate a crand.
	(eqne): New code iterator.
	(bd/bd_neg): New code_attrs.
	(<bd>_<mode>): New name for ctr<mode>_internal[12] now combined into
	a single define_insn.
	(<bd>tf_<mode>): A new insn pattern for the conditional form branch
	decrement (bdnzt/bdnzf/bdzt/bdzf).
	* config/rs6000/rs6000.c (rs6000_legitimate_combined_insn): Updated
	with the new names of the branch decrement patterns, and added the
	names of the branch decrement conditional patterns.

2018-01-08  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/83563
	* graphite.c (canonicalize_loop_closed_ssa_form): Reset the SCEV
	cache.

2018-01-08  Richard Biener  <rguenther@suse.de>

	PR middle-end/83713
	* convert.c (do_narrow): Properly guard TYPE_OVERFLOW_WRAPS checks.

2018-01-08  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/83685
	* tree-ssa-pre.c (create_expression_by_pieces): Do not insert
	references to abnormals.

2018-01-08  Richard Biener  <rguenther@suse.de>

	PR lto/83719
	* dwarf2out.c (output_indirect_strings): Handle empty
	skeleton_debug_str_hash.
	(dwarf2out_early_finish): Index strings for -gsplit-dwarf.

2018-01-08  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.c (TARGET_TRAMPOLINE_ADJUST_ADDRESS): Delete.
	(emit_store_direct): Likewise.
	(arc_trampoline_adjust_address): Likewise.
	(arc_asm_trampoline_template): New function.
	(arc_initialize_trampoline): Use asm_trampoline_template.
	(TARGET_ASM_TRAMPOLINE_TEMPLATE): Define.
	* config/arc/arc.h (TRAMPOLINE_SIZE): Adjust to 16.
	* config/arc/arc.md (flush_icache): Delete pattern.

2018-01-08  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc-c.def (__ARC_UNALIGNED__): New define.
	* config/arc/arc.h (STRICT_ALIGNMENT): Control this macro using
	munaligned-access.

2018-01-08  Sebastian Huber  <sebastian.huber@embedded-brains.de>

	PR target/83681
	* config/epiphany/epiphany.h (make_pass_mode_switch_use): Guard
	by not USED_FOR_TARGET.
	(make_pass_resolve_sw_modes): Likewise.

2018-01-08  Sebastian Huber  <sebastian.huber@embedded-brains.de>

	* config/nios2/nios2.h (nios2_section_threshold): Guard by not
	USED_FOR_TARGET.

2018-01-08  Richard Biener  <rguenther@suse.de>

	PR middle-end/83580
	* tree-data-ref.c (split_constant_offset): Remove STRIP_NOPS.

2018-01-08  Richard Biener  <rguenther@suse.de>

	PR middle-end/83517
	* match.pd ((t * 2) / 2) -> t): Add missing :c.

2018-01-06  Aldy Hernandez  <aldyh@redhat.com>

	PR middle-end/81897
	* tree-ssa-uninit.c (compute_control_dep_chain): Do not bail on
	basic blocks with a small number of successors.
	(convert_control_dep_chain_into_preds): Improve handling of
	forwarder blocks.
	(dump_predicates): Split apart into...
	(dump_pred_chain): ...here...
	(dump_pred_info): ...and here.
	(can_one_predicate_be_invalidated_p): Add debugging printfs.
	(can_chain_union_be_invalidated_p): Improve check for invalidation
	of paths.
	(uninit_uses_cannot_happen): Avoid unnecessary if
	convert_control_dep_chain_into_preds yielded nothing.

2018-01-06  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/83640
	* gimple-ssa-warn-restrict.c (builtin_access::builtin_access): Avoid
	subtracting negative offset from size.
	(builtin_access::overlap): Adjust offset bounds of the access to fall
	within the size of the object if possible.

2018-01-06  Richard Sandiford  <richard.sandiford@linaro.org>

	PR rtl-optimization/83699
	* expmed.c (extract_bit_field_1): Restrict the vector usage of
	extract_bit_field_as_subreg to cases in which the extracted
	value is also a vector.

	* lra-constraints.c (process_alt_operands): Test for the equivalence
	substitutions when detecting a possible reload cycle.

2018-01-06  Jakub Jelinek  <jakub@redhat.com>

	PR debug/83480
	* toplev.c (process_options): Don't enable debug_nonbind_markers_p
	by default if flag_selective_schedling{,2}.  Formatting fixes.

	PR rtl-optimization/83682
	* rtl.h (const_vec_duplicate_p): Only return true for VEC_DUPLICATE
	if it has non-VECTOR_MODE element mode.
	(vec_duplicate_p): Likewise.

	PR middle-end/83694
	* cfgexpand.c (expand_debug_expr): Punt if mode1 is VOIDmode
	and bitsize might be greater than MAX_BITSIZE_MODE_ANY_INT.

2018-01-05  Jakub Jelinek  <jakub@redhat.com>

	PR target/83604
	* config/i386/i386-builtin.def
	(__builtin_ia32_vgf2p8affineinvqb_v64qi,
	__builtin_ia32_vgf2p8affineqb_v64qi, __builtin_ia32_vgf2p8mulb_v64qi):
	Require also OPTION_MASK_ISA_AVX512F in addition to
	OPTION_MASK_ISA_GFNI.
	(__builtin_ia32_vgf2p8affineinvqb_v16qi_mask,
	__builtin_ia32_vgf2p8affineqb_v16qi_mask): Require
	OPTION_MASK_ISA_AVX512VL instead of OPTION_MASK_ISA_SSE in addition
	to OPTION_MASK_ISA_GFNI.
	(__builtin_ia32_vgf2p8mulb_v32qi_mask): Require
	OPTION_MASK_ISA_AVX512VL in addition to OPTION_MASK_ISA_GFNI and
	OPTION_MASK_ISA_AVX512BW.
	(__builtin_ia32_vgf2p8mulb_v16qi_mask): Require
	OPTION_MASK_ISA_AVX512VL instead of OPTION_MASK_ISA_AVX512BW in
	addition to OPTION_MASK_ISA_GFNI.
	(__builtin_ia32_vgf2p8affineinvqb_v16qi,
	__builtin_ia32_vgf2p8affineqb_v16qi, __builtin_ia32_vgf2p8mulb_v16qi):
	Require OPTION_MASK_ISA_SSE2 instead of OPTION_MASK_ISA_SSE in addition
	to OPTION_MASK_ISA_GFNI.
	* config/i386/i386.c (def_builtin): Change to builtin isa/isa2 being
	a requirement for all ISAs rather than any of them with a few
	exceptions.
	(ix86_add_new_builtins): Clear OPTION_MASK_ISA_64BIT from isa before
	processing.
	(ix86_expand_builtin): Require all ISAs from builtin's isa and isa2
	bitmasks to be enabled with 3 exceptions, instead of requiring any
	enabled ISA with lots of exceptions.
	* config/i386/sse.md (vgf2p8affineinvqb_<mode><mask_name>,
	vgf2p8affineqb_<mode><mask_name>, vgf2p8mulb_<mode><mask_name>):
	Change avx512bw in isa attribute to avx512f.
	* config/i386/sgxintrin.h: Add license boilerplate.
	* config/i386/vaesintrin.h: Likewise.  Fix macro spelling __AVX512F
	to __AVX512F__ and __AVX512VL to __AVX512VL__.
	(_mm256_aesdec_epi128, _mm256_aesdeclast_epi128, _mm256_aesenc_epi128,
	_mm256_aesenclast_epi128): Enable temporarily avx if __AVX__ is not
	defined.
	* config/i386/gfniintrin.h (_mm_gf2p8mul_epi8,
	_mm_gf2p8affineinv_epi64_epi8, _mm_gf2p8affine_epi64_epi8): Enable
	temporarily sse2 rather than sse if not enabled already.

	PR target/83604
	* config/i386/sse.md (VI248_VLBW): Rename to ...
	(VI248_AVX512VL): ... this.  Don't guard V32HI with TARGET_AVX512BW.
	(vpshrd_<mode><mask_name>, vpshld_<mode><mask_name>,
	vpshrdv_<mode>, vpshrdv_<mode>_mask, vpshrdv_<mode>_maskz,
	vpshrdv_<mode>_maskz_1, vpshldv_<mode>, vpshldv_<mode>_mask,
	vpshldv_<mode>_maskz, vpshldv_<mode>_maskz_1): Use VI248_AVX512VL
	mode iterator instead of VI248_VLBW.

2018-01-05  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-fnsummary.c (record_modified_bb_info): Add OP.
	(record_modified): Skip clobbers; add debug output.
	(param_change_prob): Use sreal frequencies.

2018-01-05  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-vect-data-refs.c (vect_compute_data_ref_alignment): Don't
	punt for user-aligned variables.

2018-01-05  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-chrec.c (chrec_contains_symbols): Return true for
	POLY_INT_CST.

2018-01-05  Sudakshina Das  <sudi.das@arm.com>

	PR target/82439
	* simplify-rtx.c (simplify_relational_operation_1): Add simplifications
	of (x|y) == x for BICS pattern.

2018-01-05  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/83605
	* gimple-ssa-strength-reduction.c: Include tree-eh.h.
	(find_candidates_dom_walker::before_dom_children): Ignore stmts that
	can throw.

2018-01-05  Sebastian Huber  <sebastian.huber@embedded-brains.de>

	* config.gcc (epiphany-*-elf*): Add (epiphany-*-rtems*) configuration.
	* config/epiphany/rtems.h: New file.

2018-01-04  Jakub Jelinek  <jakub@redhat.com>
	    Uros Bizjak  <ubizjak@gmail.com>

	PR target/83554
	* config/i386/i386.md (*<rotate_insn>hi3_1 splitter): Use
	QIreg_operand instead of register_operand predicate.
	* config/i386/i386.c (ix86_rop_should_change_byte_p,
	set_rop_modrm_reg_bits, ix86_mitigate_rop): Use -mmitigate-rop in
	comments instead of -fmitigate[-_]rop.

2018-01-04  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	PR bootstrap/81926
	* cgraphunit.c (symbol_table::compile): Switch to text_section
	before calling assembly_start debug hook.
	* run-rtl-passes.c (run_rtl_passes): Likewise.
	Include output.h.

2018-01-04  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-vrp.c (extract_range_from_binary_expr_1): Check
	range_int_cst_p rather than !symbolic_range_p before calling
	extract_range_from_multiplicative_op_1.

2017-01-04  Jeff Law  <law@redhat.com>

	* tree-ssa-math-opts.c (execute_cse_reciprocals_1): Remove
	redundant test in assertion.

2018-01-04  Richard Sandiford  <richard.sandiford@linaro.org>

	* doc/rtl.texi: Document machine_mode wrapper classes.

2018-01-04  Richard Sandiford  <richard.sandiford@linaro.org>

	* fold-const.c (fold_ternary_loc): Check tree_fits_uhwi_p before
	using tree_to_uhwi.

2018-01-04  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-ssa-forwprop.c (is_combined_permutation_identity): Allow
	the VEC_PERM_EXPR fold to fail.

2018-01-04  Jakub Jelinek  <jakub@redhat.com>

	PR debug/83585
	* bb-reorder.c (insert_section_boundary_note): Set has_bb_partition
	to switched_sections.

2018-01-04  Richard Sandiford  <richard.sandiford@linaro.org>

	PR target/83680
	* config/arm/arm.c (arm_vectorize_vec_perm_const): Fix inverted
	test for d.testing.

2018-01-04  Peter Bergner  <bergner@vnet.ibm.com>

	PR target/83387
	* config/rs6000/rs6000.c (rs6000_discover_homogeneous_aggregate): Do not
	allow arguments in FP registers if TARGET_HARD_FLOAT is false.

2018-01-04  Jakub Jelinek  <jakub@redhat.com>

	PR debug/83666
	* cfgexpand.c (expand_debug_expr) <case BIT_FIELD_REF>: Punt if mode
	is BLKmode and bitpos not zero or mode change is needed.

2018-01-04  Richard Sandiford  <richard.sandiford@linaro.org>

	PR target/83675
	* config/sparc/sparc.c (sparc_vectorize_vec_perm_const): Require
	TARGET_VIS2.

2018-01-04  Uros Bizjak  <ubizjak@gmail.com>

	PR target/83628
	* config/alpha/alpha.md (*sadd<modesuffix>): Use ASHIFT
	instead of MULT rtx.  Update all corresponding splitters.
	(*saddl_se): Ditto.
	(*ssub<modesuffix>): Ditto.
	(*ssubl_se): Ditto.
	(*cmp_sadd_di): Update split patterns.
	(*cmp_sadd_si): Ditto.
	(*cmp_sadd_sidi): Ditto.
	(*cmp_ssub_di): Ditto.
	(*cmp_ssub_si): Ditto.
	(*cmp_ssub_sidi): Ditto.
	* config/alpha/predicates.md (const23_operand): New predicate.
	* config/alpha/alpha.c (alpha_rtx_costs) [PLUS, MINUS]:
	Look for ASHIFT, not MULT inner operand.
	(alpha_split_conditional_move): Update for *sadd<modesuffix> change.

2018-01-04  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/83669
	* gcov.c (output_intermediate_file): Add version to intermediate
	gcov file.
	* doc/gcov.texi: Document new field 'version' in intermediate
	file format. Fix location of '-k' option of gcov command.

2018-01-04  Martin Liska  <mliska@suse.cz>

	PR ipa/82352
	* ipa-icf.c (sem_function::merge): Do not cross comdat boundary.

2018-01-04  Jakub Jelinek  <jakub@redhat.com>

	* gimple-ssa-sprintf.c (parse_directive): Cast second dir.len to uhwi.

2018-01-03  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/83655
	* gimple-ssa-warn-restrict.c (wrestrict_dom_walker::check_call): Avoid
	checking calls with invalid arguments.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-vect-stmts.c (vect_get_store_rhs): New function.
	(vectorizable_mask_load_store): Delete.
	(vectorizable_call): Return false for masked loads and stores.
	(vectorizable_store): Handle IFN_MASK_STORE.  Use vect_get_store_rhs
	instead of gimple_assign_rhs1.
	(vectorizable_load): Handle IFN_MASK_LOAD.
	(vect_transform_stmt): Don't set is_store for call_vec_info_type.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-vect-stmts.c (vect_build_gather_load_calls): New function,
	split out from..,
	(vectorizable_mask_load_store): ...here.
	(vectorizable_load): ...and here.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-vect-stmts.c (vect_build_all_ones_mask)
	(vect_build_zero_merge_argument): New functions, split out from...
	(vectorizable_load): ...here.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-vect-stmts.c (vect_check_store_rhs): New function,
	split out from...
	(vectorizable_mask_load_store): ...here.
	(vectorizable_store): ...and here.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-vect-stmts.c (vect_check_load_store_mask): New function,
	split out from...
	(vectorizable_mask_load_store): ...here.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-vectorizer.h (vec_load_store_type): Moved from tree-vec-stmts.c
	(vect_model_store_cost): Take a vec_load_store_type instead of a
	vect_def_type.
	* tree-vect-stmts.c (vec_load_store_type): Move to tree-vectorizer.h.
	(vect_model_store_cost): Take a vec_load_store_type instead of a
	vect_def_type.
	(vectorizable_mask_load_store): Update accordingly.
	(vectorizable_store): Likewise.
	* tree-vect-slp.c (vect_analyze_slp_cost_1): Update accordingly.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-vect-loop.c (vect_transform_loop): Stub out scalar
	IFN_MASK_LOAD calls here rather than...
	* tree-vect-stmts.c (vectorizable_mask_load_store): ...here.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* expmed.c (extract_bit_field_1): For vector extracts,
	fall back to extract_bit_field_as_subreg if vec_extract
	isn't available.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* lra-spills.c (pseudo_reg_slot_compare): Sort slots by whether
	they are variable or constant sized.
	(assign_stack_slot_num_and_sort_pseudos): Don't reuse variable-sized
	slots for constant-sized data.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-patterns.c (vect_recog_mask_conversion_pattern): When
	handling COND_EXPRs with boolean comparisons, try to find a better
	basis for the mask type than the boolean itself.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>

	* doc/rtl.texi (MAX_BITSIZE_MODE_ANY_MODE): Describe how the default
	is calculated and how it can be overridden.
	* genmodes.c (max_bitsize_mode_any_mode): New variable.
	(create_modes): Initialize it from MAX_BITSIZE_MODE_ANY_MODE,
	if defined.
	(emit_max_int): Use it to set the output MAX_BITSIZE_MODE_ANY_MODE,
	if nonzero.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* config/aarch64/aarch64-protos.h (aarch64_output_simd_mov_immediate):
	Remove the mode argument.
	(aarch64_simd_valid_immediate): Remove the mode and inverse
	arguments.
	* config/aarch64/iterators.md (bitsize): New iterator.
	* config/aarch64/aarch64-simd.md (*aarch64_simd_mov<mode>, and<mode>3)
	(ior<mode>3): Update calls to aarch64_output_simd_mov_immediate.
	* config/aarch64/constraints.md (Do, Db, Dn): Update calls to
	aarch64_simd_valid_immediate.
	* config/aarch64/predicates.md (aarch64_reg_or_orr_imm): Likewise.
	(aarch64_reg_or_bic_imm): Likewise.
	* config/aarch64/aarch64.c (simd_immediate_info): Replace mvn
	with an insn_type enum and msl with a modifier_type enum.
	Replace element_width with a scalar_mode.  Change the shift
	to unsigned int.  Add constructors for scalar_float_mode and
	scalar_int_mode elements.
	(aarch64_vect_float_const_representable_p): Delete.
	(aarch64_can_const_movi_rtx_p)
	(aarch64_simd_scalar_immediate_valid_for_move)
	(aarch64_simd_make_constant): Update call to
	aarch64_simd_valid_immediate.
	(aarch64_advsimd_valid_immediate_hs): New function.
	(aarch64_advsimd_valid_immediate): Likewise.
	(aarch64_simd_valid_immediate): Remove mode and inverse
	arguments.  Rewrite to use the above.  Use const_vec_duplicate_p
	to detect duplicated constants and use aarch64_float_const_zero_rtx_p
	and aarch64_float_const_representable_p on the result.
	(aarch64_output_simd_mov_immediate): Remove mode argument.
	Update call to aarch64_simd_valid_immediate and use of
	simd_immediate_info.
	(aarch64_output_scalar_simd_mov_immediate): Update call
	accordingly.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* machmode.h (mode_precision): Prefix with CONST_MODE_PRECISION.
	(mode_nunits): Likewise CONST_MODE_NUNITS.
	* machmode.def (ADJUST_NUNITS): Document.
	* genmodes.c (mode_data::need_nunits_adj): New field.
	(blank_mode): Update accordingly.
	(adj_nunits): New variable.
	(print_maybe_const_decl): Replace CATEGORY with a NEEDS_ADJ
	parameter.
	(emit_mode_size_inline): Set need_bytesize_adj for all modes
	listed in adj_nunits.
	(emit_mode_nunits_inline): Set need_nunits_adj for all modes
	listed in adj_nunits.  Don't emit case statements for such modes.
	(emit_insn_modes_h): Emit definitions of CONST_MODE_NUNITS
	and CONST_MODE_PRECISION.  Make CONST_MODE_SIZE expand to
	nothing if adj_nunits is nonnull.
	(emit_mode_precision, emit_mode_nunits): Use print_maybe_const_decl.
	(emit_mode_unit_size, emit_mode_base_align, emit_mode_ibit)
	(emit_mode_fbit): Update use of print_maybe_const_decl.
	(emit_move_size): Likewise.  Treat the array as non-const
	if adj_nunits.
	(emit_mode_adjustments): Handle adj_nunits.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>

	* machmode.def (VECTOR_MODES_WITH_PREFIX): Document.
	* genmodes.c (VECTOR_MODES_WITH_PREFIX): New macro.
	(VECTOR_MODES): Use it.
	(make_vector_modes): Take the prefix as an argument.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* mode-classes.def (MODE_VECTOR_BOOL): New mode class.
	* machmode.h (INTEGRAL_MODE_P, VECTOR_MODE_P): Return true
	for MODE_VECTOR_BOOL.
	* machmode.def (VECTOR_BOOL_MODE): Document.
	* genmodes.c (VECTOR_BOOL_MODE): New macro.
	(make_vector_bool_mode): New function.
	(complete_mode, emit_mode_wider, emit_mode_adjustments): Handle
	MODE_VECTOR_BOOL.
	* lto-streamer-in.c (lto_input_mode_table): Likewise.
	* rtx-vector-builder.c (rtx_vector_builder::find_cached_value):
	Likewise.
	* stor-layout.c (int_mode_for_mode): Likewise.
	* tree.c (build_vector_type_for_mode): Likewise.
	* varasm.c (output_constant_pool_2): Likewise.
	* emit-rtl.c (init_emit_once): Make sure that CONST1_RTX (BImode) and
	CONSTM1_RTX (BImode) are the same thing.  Initialize const_tiny_rtx
	for MODE_VECTOR_BOOL.
	* expr.c (expand_expr_real_1): Use VECTOR_MODE_P instead of a list
	of mode class checks.
	* tree-vect-generic.c (expand_vector_operation): Use VECTOR_MODE_P
	instead of a list of mode class checks.
	(expand_vector_scalar_condition): Likewise.
	(type_for_widest_vector_mode): Handle BImode as an inner mode.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* machmode.h (mode_size): Change from unsigned short to
	poly_uint16_pod.
	(mode_to_bytes): Return a poly_uint16 rather than an unsigned short.
	(GET_MODE_SIZE): Return a constant if ONLY_FIXED_SIZE_MODES,
	or if measurement_type is not polynomial.
	(fixed_size_mode::includes_p): Check for constant-sized modes.
	* genmodes.c (emit_mode_size_inline): Make mode_size_inline
	return a poly_uint16 rather than an unsigned short.
	(emit_mode_size): Change the type of mode_size from unsigned short
	to poly_uint16_pod.  Use ZERO_COEFFS for the initializer.
	(emit_mode_adjustments): Cope with polynomial vector sizes.
	* lto-streamer-in.c (lto_input_mode_table): Use bp_unpack_poly_value
	for GET_MODE_SIZE.
	* lto-streamer-out.c (lto_write_mode_table): Use bp_pack_poly_value
	for GET_MODE_SIZE.
	* auto-inc-dec.c (try_merge): Treat GET_MODE_SIZE as polynomial.
	* builtins.c (expand_ifn_atomic_compare_exchange_into_call): Likewise.
	* caller-save.c (setup_save_areas): Likewise.
	(replace_reg_with_saved_mem): Likewise.
	* calls.c (emit_library_call_value_1): Likewise.
	* combine-stack-adj.c (combine_stack_adjustments_for_block): Likewise.
	* combine.c (simplify_set, make_extraction, simplify_shift_const_1)
	(gen_lowpart_for_combine): Likewise.
	* convert.c (convert_to_integer_1): Likewise.
	* cse.c (equiv_constant, cse_insn): Likewise.
	* cselib.c (autoinc_split, cselib_hash_rtx): Likewise.
	(cselib_subst_to_values): Likewise.
	* dce.c (word_dce_process_block): Likewise.
	* df-problems.c (df_word_lr_mark_ref): Likewise.
	* dwarf2cfi.c (init_one_dwarf_reg_size): Likewise.
	* dwarf2out.c (multiple_reg_loc_descriptor, mem_loc_descriptor)
	(concat_loc_descriptor, concatn_loc_descriptor, loc_descriptor)
	(rtl_for_decl_location): Likewise.
	* emit-rtl.c (gen_highpart, widen_memory_access): Likewise.
	* expmed.c (extract_bit_field_1, extract_integral_bit_field): Likewise.
	* expr.c (emit_group_load_1, clear_storage_hints): Likewise.
	(emit_move_complex, emit_move_multi_word, emit_push_insn): Likewise.
	(expand_expr_real_1): Likewise.
	* function.c (assign_parm_setup_block_p, assign_parm_setup_block)
	(pad_below): Likewise.
	* gimple-fold.c (optimize_atomic_compare_exchange_p): Likewise.
	* gimple-ssa-store-merging.c (rhs_valid_for_store_merging_p): Likewise.
	* ira.c (get_subreg_tracking_sizes): Likewise.
	* ira-build.c (ira_create_allocno_objects): Likewise.
	* ira-color.c (coalesced_pseudo_reg_slot_compare): Likewise.
	(ira_sort_regnos_for_alter_reg): Likewise.
	* ira-costs.c (record_operand_costs): Likewise.
	* lower-subreg.c (interesting_mode_p, simplify_gen_subreg_concatn)
	(resolve_simple_move): Likewise.
	* lra-constraints.c (get_reload_reg, operands_match_p): Likewise.
	(process_addr_reg, simplify_operand_subreg, curr_insn_transform)
	(lra_constraints): Likewise.
	(CONST_POOL_OK_P): Reject variable-sized modes.
	* lra-spills.c (slot, assign_mem_slot, pseudo_reg_slot_compare)
	(add_pseudo_to_slot, lra_spill): Likewise.
	* omp-low.c (omp_clause_aligned_alignment): Likewise.
	* optabs-query.c (get_best_extraction_insn): Likewise.
	* optabs-tree.c (expand_vec_cond_expr_p): Likewise.
	* optabs.c (expand_vec_perm_var, expand_vec_cond_expr): Likewise.
	(expand_mult_highpart, valid_multiword_target_p): Likewise.
	* recog.c (offsettable_address_addr_space_p): Likewise.
	* regcprop.c (maybe_mode_change): Likewise.
	* reginfo.c (choose_hard_reg_mode, record_subregs_of_mode): Likewise.
	* regrename.c (build_def_use): Likewise.
	* regstat.c (dump_reg_info): Likewise.
	* reload.c (complex_word_subreg_p, push_reload, find_dummy_reload)
	(find_reloads, find_reloads_subreg_address): Likewise.
	* reload1.c (eliminate_regs_1): Likewise.
	* rtlanal.c (for_each_inc_dec_find_inc_dec, rtx_cost): Likewise.
	* simplify-rtx.c (avoid_constant_pool_reference): Likewise.
	(simplify_binary_operation_1, simplify_subreg): Likewise.
	* targhooks.c (default_function_arg_padding): Likewise.
	(default_hard_regno_nregs, default_class_max_nregs): Likewise.
	* tree-cfg.c (verify_gimple_assign_binary): Likewise.
	(verify_gimple_assign_ternary): Likewise.
	* tree-inline.c (estimate_move_cost): Likewise.
	* tree-ssa-forwprop.c (simplify_vector_constructor): Likewise.
	* tree-ssa-loop-ivopts.c (add_autoinc_candidates): Likewise.
	(get_address_cost_ainc): Likewise.
	* tree-vect-data-refs.c (vect_enhance_data_refs_alignment): Likewise.
	(vect_supportable_dr_alignment): Likewise.
	* tree-vect-loop.c (vect_determine_vectorization_factor): Likewise.
	(vectorizable_reduction): Likewise.
	* tree-vect-stmts.c (vectorizable_assignment, vectorizable_shift)
	(vectorizable_operation, vectorizable_load): Likewise.
	* tree.c (build_same_sized_truth_vector_type): Likewise.
	* valtrack.c (cleanup_auto_inc_dec): Likewise.
	* var-tracking.c (emit_note_insn_var_location): Likewise.
	* config/arc/arc.h (ASM_OUTPUT_CASE_END): Use as_a <scalar_int_mode>.
	(ADDR_VEC_ALIGN): Likewise.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* machmode.h (mode_to_bits): Return a poly_uint16 rather than an
	unsigned short.
	(GET_MODE_BITSIZE): Return a constant if ONLY_FIXED_SIZE_MODES,
	or if measurement_type is polynomial.
	* calls.c (shift_return_value): Treat GET_MODE_BITSIZE as polynomial.
	* combine.c (make_extraction): Likewise.
	* dse.c (find_shift_sequence): Likewise.
	* dwarf2out.c (mem_loc_descriptor): Likewise.
	* expmed.c (store_integral_bit_field, extract_bit_field_1): Likewise.
	(extract_bit_field, extract_low_bits): Likewise.
	* expr.c (convert_move, convert_modes, emit_move_insn_1): Likewise.
	(optimize_bitfield_assignment_op, expand_assignment): Likewise.
	(store_expr_with_bounds, store_field, expand_expr_real_1): Likewise.
	* fold-const.c (optimize_bit_field_compare, merge_ranges): Likewise.
	* gimple-fold.c (optimize_atomic_compare_exchange_p): Likewise.
	* reload.c (find_reloads): Likewise.
	* reload1.c (alter_reg): Likewise.
	* stor-layout.c (bitwise_mode_for_mode, compute_record_mode): Likewise.
	* targhooks.c (default_secondary_memory_needed_mode): Likewise.
	* tree-if-conv.c (predicate_mem_writes): Likewise.
	* tree-ssa-strlen.c (handle_builtin_memcmp): Likewise.
	* tree-vect-patterns.c (adjust_bool_pattern): Likewise.
	* tree-vect-stmts.c (vectorizable_simd_clone_call): Likewise.
	* valtrack.c (dead_debug_insert_temp): Likewise.
	* varasm.c (mergeable_constant_section): Likewise.
	* config/sh/sh.h (LOCAL_ALIGNMENT): Use as_a <fixed_size_mode>.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* expr.c (expand_assignment): Cope with polynomial mode sizes
	when assigning to a CONCAT.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* machmode.h (mode_precision): Change from unsigned short to
	poly_uint16_pod.
	(mode_to_precision): Return a poly_uint16 rather than an unsigned
	short.
	(GET_MODE_PRECISION): Return a constant if ONLY_FIXED_SIZE_MODES,
	or if measurement_type is not polynomial.
	(HWI_COMPUTABLE_MODE_P): Turn into a function.  Optimize the case
	in which the mode is already known to be a scalar_int_mode.
	* genmodes.c (emit_mode_precision): Change the type of mode_precision
	from unsigned short to poly_uint16_pod.  Use ZERO_COEFFS for the
	initializer.
	* lto-streamer-in.c (lto_input_mode_table): Use bp_unpack_poly_value
	for GET_MODE_PRECISION.
	* lto-streamer-out.c (lto_write_mode_table): Use bp_pack_poly_value
	for GET_MODE_PRECISION.
	* combine.c (update_rsp_from_reg_equal): Treat GET_MODE_PRECISION
	as polynomial.
	(try_combine, find_split_point, combine_simplify_rtx): Likewise.
	(expand_field_assignment, make_extraction): Likewise.
	(make_compound_operation_int, record_dead_and_set_regs_1): Likewise.
	(get_last_value): Likewise.
	* convert.c (convert_to_integer_1): Likewise.
	* cse.c (cse_insn): Likewise.
	* expr.c (expand_expr_real_1): Likewise.
	* lra-constraints.c (simplify_operand_subreg): Likewise.
	* optabs-query.c (can_atomic_load_p): Likewise.
	* optabs.c (expand_atomic_load): Likewise.
	(expand_atomic_store): Likewise.
	* ree.c (combine_reaching_defs): Likewise.
	* rtl.h (partial_subreg_p, paradoxical_subreg_p): Likewise.
	* rtlanal.c (nonzero_bits1, lsb_bitfield_op_p): Likewise.
	* tree.h (type_has_mode_precision_p): Likewise.
	* ubsan.c (instrument_si_overflow): Likewise.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree.h (TYPE_VECTOR_SUBPARTS): Turn into a function and handle
	polynomial numbers of units.
	(SET_TYPE_VECTOR_SUBPARTS): Likewise.
	(valid_vector_subparts_p): New function.
	(build_vector_type): Remove temporary shim and take the number
	of units as a poly_uint64 rather than an int.
	(build_opaque_vector_type): Take the number of units as a
	poly_uint64 rather than an int.
	* tree.c (build_vector_from_ctor): Handle polynomial
	TYPE_VECTOR_SUBPARTS.
	(type_hash_canon_hash, type_cache_hasher::equal): Likewise.
	(uniform_vector_p, vector_type_mode, build_vector): Likewise.
	(build_vector_from_val): If the number of units is variable,
	use build_vec_duplicate_cst for constant operands and
	VEC_DUPLICATE_EXPR otherwise.
	(make_vector_type): Remove temporary is_constant ().
	(build_vector_type, build_opaque_vector_type): Take the number of
	units as a poly_uint64 rather than an int.
	(check_vector_cst): Handle polynomial TYPE_VECTOR_SUBPARTS and
	VECTOR_CST_NELTS.
	* cfgexpand.c (expand_debug_expr): Likewise.
	* expr.c (count_type_elements, categorize_ctor_elements_1): Likewise.
	(store_constructor, expand_expr_real_1): Likewise.
	(const_scalar_mask_from_tree): Likewise.
	* fold-const-call.c (fold_const_reduction): Likewise.
	* fold-const.c (const_binop, const_unop, fold_convert_const): Likewise.
	(operand_equal_p, fold_vec_perm, fold_ternary_loc): Likewise.
	(native_encode_vector, vec_cst_ctor_to_array): Likewise.
	(fold_relational_const): Likewise.
	(native_interpret_vector): Likewise.  Change the size from an
	int to an unsigned int.
	* gimple-fold.c (gimple_fold_stmt_to_constant_1): Handle polynomial
	TYPE_VECTOR_SUBPARTS.
	(gimple_fold_indirect_ref, gimple_build_vector): Likewise.
	(gimple_build_vector_from_val): Use VEC_DUPLICATE_EXPR when
	duplicating a non-constant operand into a variable-length vector.
	* hsa-brig.c (hsa_op_immed::emit_to_buffer): Handle polynomial
	TYPE_VECTOR_SUBPARTS and VECTOR_CST_NELTS.
	* ipa-icf.c (sem_variable::equals): Likewise.
	* match.pd: Likewise.
	* omp-simd-clone.c (simd_clone_subparts): Likewise.
	* print-tree.c (print_node): Likewise.
	* stor-layout.c (layout_type): Likewise.
	* targhooks.c (default_builtin_vectorization_cost): Likewise.
	* tree-cfg.c (verify_gimple_comparison): Likewise.
	(verify_gimple_assign_binary): Likewise.
	(verify_gimple_assign_ternary): Likewise.
	(verify_gimple_assign_single): Likewise.
	* tree-pretty-print.c (dump_generic_node): Likewise.
	* tree-ssa-forwprop.c (simplify_vector_constructor): Likewise.
	(simplify_bitfield_ref, is_combined_permutation_identity): Likewise.
	* tree-vect-data-refs.c (vect_permute_store_chain): Likewise.
	(vect_grouped_load_supported, vect_permute_load_chain): Likewise.
	(vect_shift_permute_load_chain): Likewise.
	* tree-vect-generic.c (nunits_for_known_piecewise_op): Likewise.
	(expand_vector_condition, optimize_vector_constructor): Likewise.
	(lower_vec_perm, get_compute_type): Likewise.
	* tree-vect-loop.c (vect_determine_vectorization_factor): Likewise.
	(get_initial_defs_for_reduction, vect_transform_loop): Likewise.
	* tree-vect-patterns.c (vect_recog_bool_pattern): Likewise.
	(vect_recog_mask_conversion_pattern): Likewise.
	* tree-vect-slp.c (vect_supported_load_permutation_p): Likewise.
	(vect_get_constant_vectors, vect_transform_slp_perm_load): Likewise.
	* tree-vect-stmts.c (perm_mask_for_reverse): Likewise.
	(get_group_load_store_type, vectorizable_mask_load_store): Likewise.
	(vectorizable_bswap, simd_clone_subparts, vectorizable_assignment)
	(vectorizable_shift, vectorizable_operation, vectorizable_store)
	(vectorizable_load, vect_is_simple_cond, vectorizable_comparison)
	(supportable_widening_operation): Likewise.
	(supportable_narrowing_operation): Likewise.
	* tree-vector-builder.c (tree_vector_builder::binary_encoded_nelts):
	Likewise.
	* varasm.c (output_constant): Likewise.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-data-refs.c (vect_permute_store_chain): Reorganize
	so that both the length == 3 and length != 3 cases set up their
	own permute vectors.  Add comments explaining why we know the
	number of elements is constant.
	(vect_permute_load_chain): Likewise.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* machmode.h (mode_nunits): Change from unsigned char to
	poly_uint16_pod.
	(ONLY_FIXED_SIZE_MODES): New macro.
	(pod_mode::measurement_type, scalar_int_mode::measurement_type)
	(scalar_float_mode::measurement_type, scalar_mode::measurement_type)
	(complex_mode::measurement_type, fixed_size_mode::measurement_type):
	New typedefs.
	(mode_to_nunits): Return a poly_uint16 rather than an unsigned short.
	(GET_MODE_NUNITS): Return a constant if ONLY_FIXED_SIZE_MODES,
	or if measurement_type is not polynomial.
	* genmodes.c (ZERO_COEFFS): New macro.
	(emit_mode_nunits_inline): Make mode_nunits_inline return a
	poly_uint16.
	(emit_mode_nunits): Change the type of mode_nunits to poly_uint16_pod.
	Use ZERO_COEFFS when emitting initializers.
	* data-streamer.h (bp_pack_poly_value): New function.
	(bp_unpack_poly_value): Likewise.
	* lto-streamer-in.c (lto_input_mode_table): Use bp_unpack_poly_value
	for GET_MODE_NUNITS.
	* lto-streamer-out.c (lto_write_mode_table): Use bp_pack_poly_value
	for GET_MODE_NUNITS.
	* tree.c (make_vector_type): Remove temporary shim and make
	the real function take the number of units as a poly_uint64
	rather than an int.
	(build_vector_type_for_mode): Handle polynomial nunits.
	* dwarf2out.c (loc_descriptor, add_const_value_attribute): Likewise.
	* emit-rtl.c (const_vec_series_p_1): Likewise.
	(gen_rtx_CONST_VECTOR): Likewise.
	* fold-const.c (test_vec_duplicate_folding): Likewise.
	* genrecog.c (validate_pattern): Likewise.
	* optabs-query.c (can_vec_perm_var_p, can_mult_highpart_p): Likewise.
	* optabs-tree.c (expand_vec_cond_expr_p): Likewise.
	* optabs.c (expand_vector_broadcast, expand_binop_directly): Likewise.
	(shift_amt_for_vec_perm_mask, expand_vec_perm_var): Likewise.
	(expand_vec_cond_expr, expand_mult_highpart): Likewise.
	* rtlanal.c (subreg_get_info): Likewise.
	* tree-vect-data-refs.c (vect_grouped_store_supported): Likewise.
	(vect_grouped_load_supported): Likewise.
	* tree-vect-generic.c (type_for_widest_vector_mode): Likewise.
	* tree-vect-loop.c (have_whole_vector_shift): Likewise.
	* simplify-rtx.c (simplify_unary_operation_1): Likewise.
	(simplify_const_unary_operation, simplify_binary_operation_1)
	(simplify_const_binary_operation, simplify_ternary_operation)
	(test_vector_ops_duplicate, test_vector_ops): Likewise.
	(simplify_immed_subreg): Use GET_MODE_NUNITS on a fixed_size_mode
	instead of CONST_VECTOR_NUNITS.
	* varasm.c (output_constant_pool_2): Likewise.
	* rtx-vector-builder.c (rtx_vector_builder::build): Only include the
	explicit-encoded elements in the XVEC for variable-length vectors.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>

	* lra-constraints.c (curr_insn_transform): Use partial_subreg_p.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* coretypes.h (fixed_size_mode): Declare.
	(fixed_size_mode_pod): New typedef.
	* builtins.h (target_builtins::x_apply_args_mode)
	(target_builtins::x_apply_result_mode): Change type to
	fixed_size_mode_pod.
	* builtins.c (apply_args_size, apply_result_size, result_vector)
	(expand_builtin_apply_args_1, expand_builtin_apply)
	(expand_builtin_return): Update accordingly.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>

	* cse.c (hash_rtx_cb): Hash only the encoded elements.
	* cselib.c (cselib_hash_rtx): Likewise.
	* expmed.c (make_tree): Build VECTOR_CSTs directly from the
	CONST_VECTOR encoding.

2017-01-03  Jakub Jelinek  <jakub@redhat.com>
	    Jeff Law  <law@redhat.com>

	PR target/83641
	* config/i386/i386.c (ix86_adjust_stack_and_probe_stack_clash): For
	noreturn probe, use gen_pop instead of ix86_emit_restore_reg_using_pop,
	only set RTX_FRAME_RELATED_P on both the push and pop if cfa_reg is sp
	and add REG_CFA_ADJUST_CFA notes in that case to both insns.

	PR target/83641
	* config/i386/i386.c (ix86_adjust_stack_and_probe_stack_clash): Do not
	explicitly probe *sp in a noreturn function if there were any callee
	register saves or frame pointer is needed.

2018-01-03  Jakub Jelinek  <jakub@redhat.com>

	PR debug/83621
	* cfgexpand.c (expand_debug_expr): Return NULL if mode is
	BLKmode for ternary, binary or unary expressions.

	PR debug/83645
	* var-tracking.c (delete_vta_debug_insn): New inline function.
	(delete_vta_debug_insns): Add USE_CFG argument, if true, walk just
	insns from get_insns () to NULL instead of each bb separately.
	Use delete_vta_debug_insn.  No longer static.
	(vt_debug_insns_local, variable_tracking_main_1): Adjust
	delete_vta_debug_insns callers.
	* rtl.h (delete_vta_debug_insns): Declare.
	* final.c (rest_of_handle_final): Call delete_vta_debug_insns
	instead of variable_tracking_main.

2018-01-03  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/83603
	* calls.c (maybe_warn_nonstring_arg): Avoid accessing function
	arguments past the endof the argument list in functions declared
	without a prototype.
	* gimple-ssa-warn-restrict.c (wrestrict_dom_walker::check_call):
	Avoid checking when arguments are null.

2018-01-03  Martin Sebor  <msebor@redhat.com>

	PR c/83559
	* doc/extend.texi (attribute const): Fix a typo.
	* ipa-pure-const.c ((warn_function_const, warn_function_pure): Avoid
	issuing -Wsuggest-attribute for void functions.

2018-01-03  Martin Sebor  <msebor@redhat.com>

	* gimple-ssa-warn-restrict.c (builtin_memref::builtin_memref): Use
	offset_int::from instead of wide_int::to_shwi.
	(maybe_diag_overlap): Remove assertion.
	Use HOST_WIDE_INT_PRINT_DEC instead of %lli.
	* gimple-ssa-sprintf.c (format_directive): Same.
	(parse_directive): Same.
	(sprintf_dom_walker::compute_format_length): Same.
	(try_substitute_return_value): Same.

2017-01-03  Jeff Law  <law@redhat.com>

	PR middle-end/83654
	* explow.c (anti_adjust_stack_and_probe_stack_clash): Test a
	non-constant residual for zero at runtime and avoid probing in
	that case.  Reorganize code for trailing problem to mirror handling
	of the residual.

2018-01-03  Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	PR tree-optimization/83501
	* tree-ssa-strlen.c (get_string_cst): New.
	(handle_char_store): Call get_string_cst.

2018-01-03  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/83593
	* tree-ssa-strlen.c: Include tree-cfg.h.
	(strlen_check_and_optimize_stmt): Add new argument cleanup_eh.
	(strlen_dom_walker): Add new member variable m_cleanup_cfg.
	(strlen_dom_walker::strlen_dom_walker): Initialize m_cleanup_cfg
	to false.
	(strlen_dom_walker::before_dom_children): Call
	gimple_purge_dead_eh_edges. Dump tranformation with details
	dump flags.
	(strlen_dom_walker::before_dom_children): Update call by adding
	new argument cleanup_eh.
	(pass_strlen::execute): Return TODO_cleanup_cfg if needed.

2018-01-03  Martin Liska  <mliska@suse.cz>

	PR ipa/83549
	* cif-code.def (VARIADIC_THUNK): New enum value.
	* ipa-fnsummary.c (compute_fn_summary): Do not inline variadic
	thunks.

2018-01-03  Jan Beulich  <jbeulich@suse.com>

	* sse.md (mov<mode>_internal): Tighten condition for when to use
	vmovdqu<ssescalarsize> for TI and OI modes.

2018-01-03  Jakub Jelinek  <jakub@redhat.com>

	Update copyright years.

2018-01-03  Martin Liska  <mliska@suse.cz>

	PR ipa/83594
	* ipa-visibility.c (function_and_variable_visibility): Skip
	functions with noipa attribure.

2018-01-03  Jakub Jelinek  <jakub@redhat.com>

	* gcc.c (process_command): Update copyright notice dates.
	* gcov-dump.c (print_version): Ditto.
	* gcov.c (print_version): Ditto.
	* gcov-tool.c (print_version): Ditto.
	* gengtype.c (create_file): Ditto.
	* doc/cpp.texi: Bump @copying's copyright year.
	* doc/cppinternals.texi: Ditto.
	* doc/gcc.texi: Ditto.
	* doc/gccint.texi: Ditto.
	* doc/gcov.texi: Ditto.
	* doc/install.texi: Ditto.
	* doc/invoke.texi: Ditto.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>

	* vector-builder.h (vector_builder::m_full_nelts): Change from
	unsigned int to poly_uint64.
	(vector_builder::full_nelts): Update prototype accordingly.
	(vector_builder::new_vector): Likewise.
	(vector_builder::encoded_full_vector_p): Handle polynomial full_nelts.
	(vector_builder::operator ==): Likewise.
	(vector_builder::finalize): Likewise.
	* int-vector-builder.h (int_vector_builder::int_vector_builder):
	Take the number of elements as a poly_uint64 rather than an
	unsigned int.
	* vec-perm-indices.h (vec_perm_indices::m_nelts_per_input): Change
	from unsigned int to poly_uint64.
	(vec_perm_indices::vec_perm_indices): Update prototype accordingly.
	(vec_perm_indices::new_vector): Likewise.
	(vec_perm_indices::length): Likewise.
	(vec_perm_indices::nelts_per_input): Likewise.
	(vec_perm_indices::input_nelts): Likewise.
	* vec-perm-indices.c (vec_perm_indices::new_vector): Take the
	number of elements per input as a poly_uint64 rather than an
	unsigned int.  Use the original encoding for variable-length
	vectors, rather than clamping each individual element.
	For the second and subsequent elements in each pattern,
	clamp the step and base before clamping their sum.
	(vec_perm_indices::series_p): Handle polynomial element counts.
	(vec_perm_indices::all_in_range_p): Likewise.
	(vec_perm_indices_to_tree): Likewise.
	(vec_perm_indices_to_rtx): Likewise.
	* tree-vect-stmts.c (vect_gen_perm_mask_any): Likewise.
	* tree-vector-builder.c (tree_vector_builder::new_unary_operation)
	(tree_vector_builder::new_binary_operation): Handle polynomial
	element counts.  Return false if we need to know the number
	of elements at compile time.
	* fold-const.c (fold_vec_perm): Punt if the number of elements
	isn't known at compile time.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>

	* vec-perm-indices.h (vec_perm_builder): Change element type
	from HOST_WIDE_INT to poly_int64.
	(vec_perm_indices::element_type): Update accordingly.
	(vec_perm_indices::clamp): Handle polynomial element_types.
	* vec-perm-indices.c (vec_perm_indices::series_p): Likewise.
	(vec_perm_indices::all_in_range_p): Likewise.
	(tree_to_vec_perm_builder): Check for poly_int64 trees rather
	than shwi trees.
	* vector-builder.h (vector_builder::stepped_sequence_p): Handle
	polynomial vec_perm_indices element types.
	* int-vector-builder.h (int_vector_builder::equal_p): Likewise.
	* fold-const.c (fold_vec_perm): Likewise.
	* optabs.c (shift_amt_for_vec_perm_mask): Likewise.
	* tree-vect-generic.c (lower_vec_perm): Likewise.
	* tree-vect-slp.c (vect_transform_slp_perm_load): Likewise.
	* config/aarch64/aarch64.c (aarch64_evpc_tbl): Cast d->perm
	element type to HOST_WIDE_INT.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* alias.c (addr_side_effect_eval): Take the size as a poly_int64
	rather than an int.  Use plus_constant.
	(memrefs_conflict_p): Take the sizes as poly_int64s rather than ints.
	Take the offset "c" as a poly_int64 rather than a HOST_WIDE_INT.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* calls.c (emit_call_1, expand_call): Change struct_value_size from
	a HOST_WIDE_INT to a poly_int64.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* calls.c (load_register_parameters): Cope with polynomial
	mode sizes.  Require a constant size for BLKmode parameters
	that aren't described by a PARALLEL.  If BLOCK_REG_PADDING
	forces a parameter to be padded at the lsb end in order to
	fill a complete number of words, require the parameter size
	to be ordered wrt UNITS_PER_WORD.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* reload1.c (spill_stack_slot_width): Change element type
	from unsigned int to poly_uint64_pod.
	(alter_reg): Treat mode sizes as polynomial.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* reload.c (complex_word_subreg_p): New function.
	(reload_inner_reg_of_subreg, push_reload): Use it.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* lra-constraints.c (process_alt_operands): Reject matched
	operands whose sizes aren't ordered.
	(match_reload): Refer to this check here.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* builtins.c (expand_ifn_atomic_compare_exchange_into_call): Assert
	that the mode size is in the set {1, 2, 4, 8, 16}.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* var-tracking.c (adjust_mems): Treat mode sizes as polynomial.
	Use plus_constant instead of gen_rtx_PLUS.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* config/cr16/cr16-protos.h (cr16_push_rounding): Declare.
	* config/cr16/cr16.h (PUSH_ROUNDING): Move implementation to...
	* config/cr16/cr16.c (cr16_push_rounding): ...this new function.
	* config/h8300/h8300-protos.h (h8300_push_rounding): Declare.
	* config/h8300/h8300.h (PUSH_ROUNDING): Move implementation to...
	* config/h8300/h8300.c (h8300_push_rounding): ...this new function.
	* config/i386/i386-protos.h (ix86_push_rounding): Declare.
	* config/i386/i386.h (PUSH_ROUNDING): Move implementation to...
	* config/i386/i386.c (ix86_push_rounding): ...this new function.
	* config/m32c/m32c-protos.h (m32c_push_rounding): Take and return
	a poly_int64.
	* config/m32c/m32c.c (m32c_push_rounding): Likewise.
	* config/m68k/m68k-protos.h (m68k_push_rounding): Declare.
	* config/m68k/m68k.h (PUSH_ROUNDING): Move implementation to...
	* config/m68k/m68k.c (m68k_push_rounding): ...this new function.
	* config/pdp11/pdp11-protos.h (pdp11_push_rounding): Declare.
	* config/pdp11/pdp11.h (PUSH_ROUNDING): Move implementation to...
	* config/pdp11/pdp11.c (pdp11_push_rounding): ...this new function.
	* config/stormy16/stormy16-protos.h (xstormy16_push_rounding): Declare.
	* config/stormy16/stormy16.h (PUSH_ROUNDING): Move implementation to...
	* config/stormy16/stormy16.c (xstormy16_push_rounding): ...this new
	function.
	* expr.c (emit_move_resolve_push): Treat the input and result
	of PUSH_ROUNDING as a poly_int64.
	(emit_move_complex_push, emit_single_push_insn_1): Likewise.
	(emit_push_insn): Likewise.
	* lra-eliminations.c (mark_not_eliminable): Likewise.
	* recog.c (push_operand): Likewise.
	* reload1.c (elimination_effects): Likewise.
	* rtlanal.c (nonzero_bits1): Likewise.
	* calls.c (store_one_arg): Likewise.  Require the padding to be
	known at compile time.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* expr.c (emit_single_push_insn_1): Treat mode sizes as polynomial.
	Use plus_constant instead of gen_rtx_PLUS.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* auto-inc-dec.c (set_inc_state): Take the mode size as a poly_int64
	rather than an int.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* expr.c (expand_expr_real_1): Use tree_to_poly_uint64
	instead of int_size_in_bytes when handling VIEW_CONVERT_EXPRs
	via stack temporaries.  Treat the mode size as polynomial too.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* expr.c (expand_expr_real_2): When handling conversions involving
	unions, apply tree_to_poly_uint64 to the TYPE_SIZE rather than
	multiplying int_size_in_bytes by BITS_PER_UNIT.  Treat GET_MODE_BISIZE
	as a poly_uint64 too.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* rtlanal.c (subreg_get_info): Handle polynomial mode sizes.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* combine.c (can_change_dest_mode): Handle polynomial
	REGMODE_NATURAL_SIZE.
	* expmed.c (store_bit_field_1): Likewise.
	* expr.c (store_constructor): Likewise.
	* emit-rtl.c (validate_subreg): Operate on polynomial mode sizes
	and polynomial REGMODE_NATURAL_SIZE.
	(gen_lowpart_common): Likewise.
	* reginfo.c (record_subregs_of_mode): Likewise.
	* rtlanal.c (read_modify_subreg_p): Likewise.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* internal-fn.c (expand_vector_ubsan_overflow): Handle polynomial
	numbers of elements.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* match.pd: Cope with polynomial numbers of vector elements.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* fold-const.c (fold_indirect_ref_1): Handle polynomial offsets
	in a POINTER_PLUS_EXPR.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* omp-simd-clone.c (simd_clone_subparts): New function.
	(simd_clone_init_simd_arrays): Use it instead of TYPE_VECTOR_SUBPARTS.
	(ipa_simd_modify_function_body): Likewise.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-generic.c (nunits_for_known_piecewise_op): New function.
	(expand_vector_piecewise): Use it instead of TYPE_VECTOR_SUBPARTS.
	(expand_vector_addition, add_rshift, expand_vector_divmod): Likewise.
	(expand_vector_condition, vector_element): Likewise.
	(subparts_gt): New function.
	(get_compute_type): Use subparts_gt.
	(count_type_subparts): Delete.
	(expand_vector_operations_1): Use subparts_gt instead of
	count_type_subparts.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-data-refs.c (vect_no_alias_p): Replace with...
	(vect_compile_time_alias): ...this new function.  Do the calculation
	on poly_ints rather than trees.
	(vect_prune_runtime_alias_test_list): Update call accordingly.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-slp.c (vect_build_slp_tree_1): Handle polynomial
	numbers of units.
	(vect_schedule_slp_instance): Likewise.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-slp.c (vect_get_and_check_slp_defs): Reject
	constant and extern definitions for variable-length vectors.
	(vect_get_constant_vectors): Note that the number of units
	is known to be constant.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-stmts.c (vectorizable_conversion): Treat the number
	of units as polynomial.  Choose between WIDE and NARROW based
	on multiple_p.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-stmts.c (simd_clone_subparts): New function.
	(vectorizable_simd_clone_call): Use it instead of TYPE_VECTOR_SUBPARTS.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-stmts.c (vectorizable_call): Treat the number of
	vectors as polynomial.  Use build_index_vector for
	IFN_GOMP_SIMD_LANE.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-stmts.c (get_load_store_type): Treat the number of
	units as polynomial.  Reject VMAT_ELEMENTWISE and VMAT_STRIDED_SLP
	for variable-length vectors.
	(vectorizable_mask_load_store): Treat the number of units as
	polynomial, asserting that it is constant if the condition has
	already been enforced.
	(vectorizable_store, vectorizable_load): Likewise.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-loop.c (vectorizable_live_operation): Treat the number
	of units as polynomial.  Punt if we can't tell at compile time
	which vector contains the final result.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-loop.c (vectorizable_induction): Treat the number
	of units as polynomial.  Punt on SLP inductions.  Use an integer
	VEC_SERIES_EXPR for variable-length integer reductions.  Use a
	cast of such a series for variable-length floating-point
	reductions.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree.h (build_index_vector): Declare.
	* tree.c (build_index_vector): New function.
	* tree-vect-loop.c (get_initial_defs_for_reduction): Treat the number
	of units as polynomial, forcibly converting it to a constant if
	vectorizable_reduction has already enforced the condition.
	(vect_create_epilog_for_reduction): Likewise.  Use build_index_vector
	to create a {1,2,3,...} vector.
	(vectorizable_reduction): Treat the number of units as polynomial.
	Choose vectype_in based on the largest scalar element size rather
	than the smallest number of units.  Enforce the restrictions
	relied on above.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-data-refs.c (vector_alignment_reachable_p): Treat the
	number of units as polynomial.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* target.h (vector_sizes, auto_vector_sizes): New typedefs.
	* target.def (autovectorize_vector_sizes): Return the vector sizes
	by pointer, using vector_sizes rather than a bitmask.
	* targhooks.h (default_autovectorize_vector_sizes): Update accordingly.
	* targhooks.c (default_autovectorize_vector_sizes): Likewise.
	* config/aarch64/aarch64.c (aarch64_autovectorize_vector_sizes):
	Likewise.
	* config/arc/arc.c (arc_autovectorize_vector_sizes): Likewise.
	* config/arm/arm.c (arm_autovectorize_vector_sizes): Likewise.
	* config/i386/i386.c (ix86_autovectorize_vector_sizes): Likewise.
	* config/mips/mips.c (mips_autovectorize_vector_sizes): Likewise.
	* omp-general.c (omp_max_vf): Likewise.
	* omp-low.c (omp_clause_aligned_alignment): Likewise.
	* optabs-query.c (can_vec_mask_load_store_p): Likewise.
	* tree-vect-loop.c (vect_analyze_loop): Likewise.
	* tree-vect-slp.c (vect_slp_bb): Likewise.
	* doc/tm.texi: Regenerate.
	* tree-vectorizer.h (current_vector_size): Change from an unsigned int
	to a poly_uint64.
	* tree-vect-stmts.c (get_vectype_for_scalar_type_and_size): Take
	the vector size as a poly_uint64 rather than an unsigned int.
	(current_vector_size): Change from an unsigned int to a poly_uint64.
	(get_vectype_for_scalar_type): Update accordingly.
	* tree.h (build_truth_vector_type): Take the size and number of
	units as a poly_uint64 rather than an unsigned int.
	(build_vector_type): Add a temporary overload that takes
	the number of units as a poly_uint64 rather than an unsigned int.
	* tree.c (make_vector_type): Likewise.
	(build_truth_vector_type): Take the number of units as a poly_uint64
	rather than an unsigned int.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* target.def (get_mask_mode): Take the number of units and length
	as poly_uint64s rather than unsigned ints.
	* targhooks.h (default_get_mask_mode): Update accordingly.
	* targhooks.c (default_get_mask_mode): Likewise.
	* config/i386/i386.c (ix86_get_mask_mode): Likewise.
	* doc/tm.texi: Regenerate.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* omp-general.h (omp_max_vf): Return a poly_uint64 instead of an int.
	* omp-general.c (omp_max_vf): Likewise.
	* omp-expand.c (omp_adjust_chunk_size): Update call to omp_max_vf.
	(expand_omp_simd): Handle polynomial safelen.
	* omp-low.c (omplow_simd_context): Add a default constructor.
	(omplow_simd_context::max_vf): Change from int to poly_uint64.
	(lower_rec_simd_input_clauses): Update accordingly.
	(lower_rec_input_clauses): Likewise.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vectorizer.h (vect_nunits_for_cost): New function.
	* tree-vect-loop.c (vect_model_reduction_cost): Use it.
	* tree-vect-slp.c (vect_analyze_slp_cost_1): Likewise.
	(vect_analyze_slp_cost): Likewise.
	* tree-vect-stmts.c (vect_model_store_cost): Likewise.
	(vect_model_load_cost): Likewise.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-slp.c (vect_record_max_nunits, vect_build_slp_tree_1)
	(vect_build_slp_tree_2, vect_build_slp_tree): Change max_nunits
	from an unsigned int * to a poly_uint64_pod *.
	(calculate_unrolling_factor): New function.
	(vect_analyze_slp_instance): Use it.  Track polynomial max_nunits.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vectorizer.h (_slp_instance::unrolling_factor): Change
	from an unsigned int to a poly_uint64.
	(_loop_vec_info::slp_unrolling_factor): Likewise.
	(_loop_vec_info::vectorization_factor): Change from an int
	to a poly_uint64.
	(MAX_VECTORIZATION_FACTOR): Bump from 64 to INT_MAX.
	(vect_get_num_vectors): New function.
	(vect_update_max_nunits, vect_vf_for_cost): Likewise.
	(vect_get_num_copies): Use vect_get_num_vectors.
	(vect_analyze_data_ref_dependences): Change max_vf from an int *
	to an unsigned int *.
	(vect_analyze_data_refs): Change min_vf from an int * to a
	poly_uint64 *.
	(vect_transform_slp_perm_load): Take the vf as a poly_uint64 rather
	than an unsigned HOST_WIDE_INT.
	* tree-vect-data-refs.c (vect_analyze_possibly_independent_ddr)
	(vect_analyze_data_ref_dependence): Change max_vf from an int *
	to an unsigned int *.
	(vect_analyze_data_ref_dependences): Likewise.
	(vect_compute_data_ref_alignment): Handle polynomial vf.
	(vect_enhance_data_refs_alignment): Likewise.
	(vect_prune_runtime_alias_test_list): Likewise.
	(vect_shift_permute_load_chain): Likewise.
	(vect_supportable_dr_alignment): Likewise.
	(dependence_distance_ge_vf): Take the vectorization factor as a
	poly_uint64 rather than an unsigned HOST_WIDE_INT.
	(vect_analyze_data_refs): Change min_vf from an int * to a
	poly_uint64 *.
	* tree-vect-loop-manip.c (vect_gen_scalar_loop_niters): Take
	vfm1 as a poly_uint64 rather than an int.  Make the same change
	for the returned bound_scalar.
	(vect_gen_vector_loop_niters): Handle polynomial vf.
	(vect_do_peeling): Likewise.  Update call to
	vect_gen_scalar_loop_niters and handle polynomial bound_scalars.
	(vect_gen_vector_loop_niters_mult_vf): Assert that the vf must
	be constant.
	* tree-vect-loop.c (vect_determine_vectorization_factor)
	(vect_update_vf_for_slp, vect_analyze_loop_2): Handle polynomial vf.
	(vect_get_known_peeling_cost): Likewise.
	(vect_estimate_min_profitable_iters, vectorizable_reduction): Likewise.
	(vect_worthwhile_without_simd_p, vectorizable_induction): Likewise.
	(vect_transform_loop): Likewise.  Use the lowest possible VF when
	updating the upper bounds of the loop.
	(vect_min_worthwhile_factor): Make static.  Return an unsigned int
	rather than an int.
	* tree-vect-slp.c (vect_attempt_slp_rearrange_stmts): Cope with
	polynomial unroll factors.
	(vect_analyze_slp_cost_1, vect_analyze_slp_instance): Likewise.
	(vect_make_slp_decision): Likewise.
	(vect_supported_load_permutation_p): Likewise, and polynomial
	vf too.
	(vect_analyze_slp_cost): Handle polynomial vf.
	(vect_slp_analyze_node_operations): Likewise.
	(vect_slp_analyze_bb_1): Likewise.
	(vect_transform_slp_perm_load): Take the vf as a poly_uint64 rather
	than an unsigned HOST_WIDE_INT.
	* tree-vect-stmts.c (vectorizable_simd_clone_call, vectorizable_store)
	(vectorizable_load): Handle polynomial vf.
	* tree-vectorizer.c (simduid_to_vf::vf): Change from an int to
	a poly_uint64.
	(adjust_simduid_builtins, shrink_simd_arrays): Update accordingly.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* match.pd: Handle bit operations involving three constants
	and try to fold one pair.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-vect-loop-manip.c: Include gimple-fold.h.
	(slpeel_make_loop_iterate_ntimes): Add step, final_iv and
	niters_maybe_zero parameters.  Handle other cases besides a step of 1.
	(vect_gen_vector_loop_niters): Add a step_vector_ptr parameter.
	Add a path that uses a step of VF instead of 1, but disable it
	for now.
	(vect_do_peeling): Add step_vector, niters_vector_mult_vf_var
	and niters_no_overflow parameters.  Update calls to
	slpeel_make_loop_iterate_ntimes and vect_gen_vector_loop_niters.
	Create a new SSA name if the latter choses to use a ste other
	than zero, and return it via niters_vector_mult_vf_var.
	* tree-vect-loop.c (vect_transform_loop): Update calls to
	vect_do_peeling, vect_gen_vector_loop_niters and
	slpeel_make_loop_iterate_ntimes.
	* tree-vectorizer.h (slpeel_make_loop_iterate_ntimes, vect_do_peeling)
	(vect_gen_vector_loop_niters): Update declarations after above changes.

2018-01-02  Michael Meissner  <meissner@linux.vnet.ibm.com>

	* config/rs6000/rs6000.md (floor<mode>2): Add support for IEEE
	128-bit round to integer instructions.
	(ceil<mode>2): Likewise.
	(btrunc<mode>2): Likewise.
	(round<mode>2): Likewise.

2018-01-02  Aaron Sawdey  <acsawdey@linux.vnet.ibm.com>

	* config/rs6000/rs6000-string.c (expand_block_move): Allow the use of
	unaligned VSX load/store on P8/P9.
	(expand_block_clear): Allow the use of unaligned VSX
	load/store on P8/P9.

2018-01-02  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

	* config/rs6000/rs6000-p8swap.c (swap_feeds_both_load_and_store):
	New function.
	(rs6000_analyze_swaps): Mark a web unoptimizable if it contains a
	swap associated with both a load and a store.

2018-01-02  Andrew Waterman  <andrew@sifive.com>

	* config/riscv/linux.h (ICACHE_FLUSH_FUNC): New.
	* config/riscv/riscv.md (clear_cache): Use it.

2018-01-02  Artyom Skrobov  <tyomitch@gmail.com>

	* web.c: Remove out-of-date comment.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* expr.c (fixup_args_size_notes): Check that any existing
	REG_ARGS_SIZE notes are correct, and don't try to re-add them.
	(emit_single_push_insn_1): Move stack_pointer_delta adjustment to...
	(emit_single_push_insn): ...here.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* rtl.h (CONST_VECTOR_ELT): Redefine to const_vector_elt.
	(const_vector_encoded_nelts): New function.
	(CONST_VECTOR_NUNITS): Redefine to use GET_MODE_NUNITS.
	(const_vector_int_elt, const_vector_elt): Declare.
	* emit-rtl.c (const_vector_int_elt_1): New function.
	(const_vector_elt): Likewise.
	* simplify-rtx.c (simplify_immed_subreg): Avoid taking the address
	of CONST_VECTOR_ELT.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* expr.c: Include rtx-vector-builder.h.
	(const_vector_mask_from_tree): Use rtx_vector_builder and operate
	directly on the tree encoding.
	(const_vector_from_tree): Likewise.
	* optabs.c: Include rtx-vector-builder.h.
	(expand_vec_perm_var): Use rtx_vector_builder and create a repeating
	sequence of "u" values.
	* vec-perm-indices.c: Include rtx-vector-builder.h.
	(vec_perm_indices_to_rtx): Use rtx_vector_builder and operate
	directly on the vec_perm_indices encoding.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* doc/rtl.texi (const_vector): Describe new encoding scheme.
	* Makefile.in (OBJS): Add rtx-vector-builder.o.
	* rtx-vector-builder.h: New file.
	* rtx-vector-builder.c: Likewise.
	* rtl.h (rtx_def::u2): Add a const_vector field.
	(CONST_VECTOR_NPATTERNS): New macro.
	(CONST_VECTOR_NELTS_PER_PATTERN): Likewise.
	(CONST_VECTOR_DUPLICATE_P): Likewise.
	(CONST_VECTOR_STEPPED_P): Likewise.
	(CONST_VECTOR_ENCODED_ELT): Likewise.
	(const_vec_duplicate_p): Check for a duplicated vector encoding.
	(unwrap_const_vec_duplicate): Likewise.
	(const_vec_series_p): Check for a non-duplicated vector encoding.
	Say that the function only returns true for integer vectors.
	* emit-rtl.c: Include rtx-vector-builder.h.
	(gen_const_vec_duplicate_1): Delete.
	(gen_const_vector): Call gen_const_vec_duplicate instead of
	gen_const_vec_duplicate_1.
	(const_vec_series_p_1): Operate directly on the CONST_VECTOR encoding.
	(gen_const_vec_duplicate): Use rtx_vector_builder.
	(gen_const_vec_series): Likewise.
	(gen_rtx_CONST_VECTOR): Likewise.
	* config/powerpcspe/powerpcspe.c: Include rtx-vector-builder.h.
	(swap_const_vector_halves): Take an rtx pointer rather than rtx.
	Build a new vector rather than modifying a CONST_VECTOR in-place.
	(handle_special_swappables): Update call accordingly.
	* config/rs6000/rs6000-p8swap.c: Include rtx-vector-builder.h.
	(swap_const_vector_halves): Take an rtx pointer rather than rtx.
	Build a new vector rather than modifying a CONST_VECTOR in-place.
	(handle_special_swappables): Update call accordingly.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* simplify-rtx.c (simplify_const_binary_operation): Use
	CONST_VECTOR_ELT instead of XVECEXP.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-cfg.c (verify_gimple_assign_ternary): Allow the size of
	the selector elements to be different from the data elements
	if the selector is a VECTOR_CST.
	* tree-vect-stmts.c (vect_gen_perm_mask_any): Use a vector of
	ssizetype for the selector.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* optabs.c (shift_amt_for_vec_perm_mask): Try using series_p
	before testing each element individually.
	* tree-vect-generic.c (lower_vec_perm): Likewise.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* selftest.h (selftest::vec_perm_indices_c_tests): Declare.
	* selftest-run-tests.c (selftest::run_tests): Call it.
	* vector-builder.h (vector_builder::operator ==): New function.
	(vector_builder::operator !=): Likewise.
	* vec-perm-indices.h (vec_perm_indices::series_p): Declare.
	(vec_perm_indices::all_from_input_p): New function.
	* vec-perm-indices.c (vec_perm_indices::series_p): Likewise.
	(test_vec_perm_12, selftest::vec_perm_indices_c_tests): Likewise.
	* fold-const.c (fold_ternary_loc): Use tree_to_vec_perm_builder
	instead of reading the VECTOR_CST directly.  Detect whether both
	vector inputs are the same before constructing the vec_perm_indices,
	and update the number of inputs argument accordingly.  Use the
	utility functions added above.  Only construct sel2 if we need to.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* optabs.c (expand_vec_perm_var): Use an explicit encoding for
	the broadcast of the low byte.
	(expand_mult_highpart): Use an explicit encoding for the permutes.
	* optabs-query.c (can_mult_highpart_p): Likewise.
	* tree-vect-loop.c (calc_vec_perm_mask_for_shift): Likewise.
	* tree-vect-stmts.c (perm_mask_for_reverse): Likewise.
	(vectorizable_bswap): Likewise.
	* tree-vect-data-refs.c (vect_grouped_store_supported): Use an
	explicit encoding for the power-of-2 permutes.
	(vect_permute_store_chain): Likewise.
	(vect_grouped_load_supported): Likewise.
	(vect_permute_load_chain): Likewise.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* vec-perm-indices.h (vec_perm_indices_to_tree): Declare.
	* vec-perm-indices.c (vec_perm_indices_to_tree): New function.
	* tree-ssa-forwprop.c (simplify_vector_constructor): Use it.
	* tree-vect-slp.c (vect_transform_slp_perm_load): Likewise.
	* tree-vect-stmts.c (vectorizable_bswap): Likewise.
	(vect_gen_perm_mask_any): Likewise.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* int-vector-builder.h: New file.
	* vec-perm-indices.h: Include int-vector-builder.h.
	(vec_perm_indices): Redefine as an int_vector_builder.
	(auto_vec_perm_indices): Delete.
	(vec_perm_builder): Redefine as a stand-alone class.
	(vec_perm_indices::vec_perm_indices): New function.
	(vec_perm_indices::clamp): Likewise.
	* vec-perm-indices.c: Include fold-const.h and tree-vector-builder.h.
	(vec_perm_indices::new_vector): New function.
	(vec_perm_indices::new_expanded_vector): Update for new
	vec_perm_indices class.
	(vec_perm_indices::rotate_inputs): New function.
	(vec_perm_indices::all_in_range_p): Operate directly on the
	encoded form, without computing elided elements.
	(tree_to_vec_perm_builder): Operate directly on the VECTOR_CST
	encoding.  Update for new vec_perm_indices class.
	* optabs.c (expand_vec_perm_const): Create a vec_perm_indices for
	the given vec_perm_builder.
	(expand_vec_perm_var): Update vec_perm_builder constructor.
	(expand_mult_highpart): Use vec_perm_builder instead of
	auto_vec_perm_indices.
	* optabs-query.c (can_mult_highpart_p): Use vec_perm_builder and
	vec_perm_indices instead of auto_vec_perm_indices.  Use a single
	or double series encoding as appropriate.
	* fold-const.c (fold_ternary_loc): Use vec_perm_builder and
	vec_perm_indices instead of auto_vec_perm_indices.
	* tree-ssa-forwprop.c (simplify_vector_constructor): Likewise.
	* tree-vect-data-refs.c (vect_grouped_store_supported): Likewise.
	(vect_permute_store_chain): Likewise.
	(vect_grouped_load_supported): Likewise.
	(vect_permute_load_chain): Likewise.
	(vect_shift_permute_load_chain): Likewise.
	* tree-vect-slp.c (vect_build_slp_tree_1): Likewise.
	(vect_transform_slp_perm_load): Likewise.
	(vect_schedule_slp_instance): Likewise.
	* tree-vect-stmts.c (perm_mask_for_reverse): Likewise.
	(vectorizable_mask_load_store): Likewise.
	(vectorizable_bswap): Likewise.
	(vectorizable_store): Likewise.
	(vectorizable_load): Likewise.
	* tree-vect-generic.c (lower_vec_perm): Use vec_perm_builder and
	vec_perm_indices instead of auto_vec_perm_indices.  Use
	tree_to_vec_perm_builder to read the vector from a tree.
	* tree-vect-loop.c (calc_vec_perm_mask_for_shift): Take a
	vec_perm_builder instead of a vec_perm_indices.
	(have_whole_vector_shift): Use vec_perm_builder and
	vec_perm_indices instead of auto_vec_perm_indices.  Leave the
	truncation to calc_vec_perm_mask_for_shift.
	(vect_create_epilog_for_reduction): Likewise.
	* config/aarch64/aarch64.c (expand_vec_perm_d::perm): Change
	from auto_vec_perm_indices to vec_perm_indices.
	(aarch64_expand_vec_perm_const_1): Use rotate_inputs on d.perm
	instead of changing individual elements.
	(aarch64_vectorize_vec_perm_const): Use new_vector to install
	the vector in d.perm.
	* config/arm/arm.c (expand_vec_perm_d::perm): Change
	from auto_vec_perm_indices to vec_perm_indices.
	(arm_expand_vec_perm_const_1): Use rotate_inputs on d.perm
	instead of changing individual elements.
	(arm_vectorize_vec_perm_const): Use new_vector to install
	the vector in d.perm.
	* config/powerpcspe/powerpcspe.c (rs6000_expand_extract_even):
	Update vec_perm_builder constructor.
	(rs6000_expand_interleave): Likewise.
	* config/rs6000/rs6000.c (rs6000_expand_extract_even): Likewise.
	(rs6000_expand_interleave): Likewise.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* optabs-query.c (can_vec_perm_var_p): Check whether lowering
	to qimode could truncate the indices.
	* optabs.c (expand_vec_perm_var): Likewise.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* Makefile.in (OBJS): Add vec-perm-indices.o.
	* vec-perm-indices.h: New file.
	* vec-perm-indices.c: Likewise.
	* target.h (vec_perm_indices): Replace with a forward class
	declaration.
	(auto_vec_perm_indices): Move to vec-perm-indices.h.
	* optabs.h: Include vec-perm-indices.h.
	(expand_vec_perm): Delete.
	(selector_fits_mode_p, expand_vec_perm_var): Declare.
	(expand_vec_perm_const): Declare.
	* target.def (vec_perm_const_ok): Replace with...
	(vec_perm_const): ...this new hook.
	* doc/tm.texi.in (TARGET_VECTORIZE_VEC_PERM_CONST_OK): Replace with...
	(TARGET_VECTORIZE_VEC_PERM_CONST): ...this new hook.
	* doc/tm.texi: Regenerate.
	* optabs.def (vec_perm_const): Delete.
	* doc/md.texi (vec_perm_const): Likewise.
	(vec_perm): Refer to TARGET_VECTORIZE_VEC_PERM_CONST.
	* expr.c (expand_expr_real_2): Use expand_vec_perm_const rather than
	expand_vec_perm for constant permutation vectors.  Assert that
	the mode of variable permutation vectors is the integer equivalent
	of the mode that is being permuted.
	* optabs-query.h (selector_fits_mode_p): Declare.
	* optabs-query.c: Include vec-perm-indices.h.
	(selector_fits_mode_p): New function.
	(can_vec_perm_const_p): Check whether targetm.vectorize.vec_perm_const
	is defined, instead of checking whether the vec_perm_const_optab
	exists.  Use targetm.vectorize.vec_perm_const instead of
	targetm.vectorize.vec_perm_const_ok.  Check whether the indices
	fit in the vector mode before using a variable permute.
	* optabs.c (shift_amt_for_vec_perm_mask): Take a mode and a
	vec_perm_indices instead of an rtx.
	(expand_vec_perm): Replace with...
	(expand_vec_perm_const): ...this new function.  Take the selector
	as a vec_perm_indices rather than an rtx.  Also take the mode of
	the selector.  Update call to shift_amt_for_vec_perm_mask.
	Use targetm.vectorize.vec_perm_const instead of vec_perm_const_optab.
	Use vec_perm_indices::new_expanded_vector to expand the original
	selector into bytes.  Check whether the indices fit in the vector
	mode before using a variable permute.
	(expand_vec_perm_var): Make global.
	(expand_mult_highpart): Use expand_vec_perm_const.
	* fold-const.c: Includes vec-perm-indices.h.
	* tree-ssa-forwprop.c: Likewise.
	* tree-vect-data-refs.c: Likewise.
	* tree-vect-generic.c: Likewise.
	* tree-vect-loop.c: Likewise.
	* tree-vect-slp.c: Likewise.
	* tree-vect-stmts.c: Likewise.
	* config/aarch64/aarch64-protos.h (aarch64_expand_vec_perm_const):
	Delete.
	* config/aarch64/aarch64-simd.md (vec_perm_const<mode>): Delete.
	* config/aarch64/aarch64.c (aarch64_expand_vec_perm_const)
	(aarch64_vectorize_vec_perm_const_ok): Fuse into...
	(aarch64_vectorize_vec_perm_const): ...this new function.
	(TARGET_VECTORIZE_VEC_PERM_CONST_OK): Delete.
	(TARGET_VECTORIZE_VEC_PERM_CONST): Redefine.
	* config/arm/arm-protos.h (arm_expand_vec_perm_const): Delete.
	* config/arm/vec-common.md (vec_perm_const<mode>): Delete.
	* config/arm/arm.c (TARGET_VECTORIZE_VEC_PERM_CONST_OK): Delete.
	(TARGET_VECTORIZE_VEC_PERM_CONST): Redefine.
	(arm_expand_vec_perm_const, arm_vectorize_vec_perm_const_ok): Merge
	into...
	(arm_vectorize_vec_perm_const): ...this new function.  Explicitly
	check for NEON modes.
	* config/i386/i386-protos.h (ix86_expand_vec_perm_const): Delete.
	* config/i386/sse.md (VEC_PERM_CONST, vec_perm_const<mode>): Delete.
	* config/i386/i386.c (ix86_expand_vec_perm_const_1): Update comment.
	(ix86_expand_vec_perm_const, ix86_vectorize_vec_perm_const_ok): Merge
	into...
	(ix86_vectorize_vec_perm_const): ...this new function.  Incorporate
	the old VEC_PERM_CONST conditions.
	* config/ia64/ia64-protos.h (ia64_expand_vec_perm_const): Delete.
	* config/ia64/vect.md (vec_perm_const<mode>): Delete.
	* config/ia64/ia64.c (ia64_expand_vec_perm_const)
	(ia64_vectorize_vec_perm_const_ok): Merge into...
	(ia64_vectorize_vec_perm_const): ...this new function.
	* config/mips/loongson.md (vec_perm_const<mode>): Delete.
	* config/mips/mips-msa.md (vec_perm_const<mode>): Delete.
	* config/mips/mips-ps-3d.md (vec_perm_constv2sf): Delete.
	* config/mips/mips-protos.h (mips_expand_vec_perm_const): Delete.
	* config/mips/mips.c (mips_expand_vec_perm_const)
	(mips_vectorize_vec_perm_const_ok): Merge into...
	(mips_vectorize_vec_perm_const): ...this new function.
	* config/powerpcspe/altivec.md (vec_perm_constv16qi): Delete.
	* config/powerpcspe/paired.md (vec_perm_constv2sf): Delete.
	* config/powerpcspe/spe.md (vec_perm_constv2si): Delete.
	* config/powerpcspe/vsx.md (vec_perm_const<mode>): Delete.
	* config/powerpcspe/powerpcspe-protos.h (altivec_expand_vec_perm_const)
	(rs6000_expand_vec_perm_const): Delete.
	* config/powerpcspe/powerpcspe.c (TARGET_VECTORIZE_VEC_PERM_CONST_OK):
	Delete.
	(TARGET_VECTORIZE_VEC_PERM_CONST): Redefine.
	(altivec_expand_vec_perm_const_le): Take each operand individually.
	Operate on constant selectors rather than rtxes.
	(altivec_expand_vec_perm_const): Likewise.  Update call to
	altivec_expand_vec_perm_const_le.
	(rs6000_expand_vec_perm_const): Delete.
	(rs6000_vectorize_vec_perm_const_ok): Delete.
	(rs6000_vectorize_vec_perm_const): New function.
	(rs6000_do_expand_vec_perm): Take a vec_perm_builder instead of
	an element count and rtx array.
	(rs6000_expand_extract_even): Update call accordingly.
	(rs6000_expand_interleave): Likewise.
	* config/rs6000/altivec.md (vec_perm_constv16qi): Delete.
	* config/rs6000/paired.md (vec_perm_constv2sf): Delete.
	* config/rs6000/vsx.md (vec_perm_const<mode>): Delete.
	* config/rs6000/rs6000-protos.h (altivec_expand_vec_perm_const)
	(rs6000_expand_vec_perm_const): Delete.
	* config/rs6000/rs6000.c (TARGET_VECTORIZE_VEC_PERM_CONST_OK): Delete.
	(TARGET_VECTORIZE_VEC_PERM_CONST): Redefine.
	(altivec_expand_vec_perm_const_le): Take each operand individually.
	Operate on constant selectors rather than rtxes.
	(altivec_expand_vec_perm_const): Likewise.  Update call to
	altivec_expand_vec_perm_const_le.
	(rs6000_expand_vec_perm_const): Delete.
	(rs6000_vectorize_vec_perm_const_ok): Delete.
	(rs6000_vectorize_vec_perm_const): New function.  Remove stray
	reference to the SPE evmerge intructions.
	(rs6000_do_expand_vec_perm): Take a vec_perm_builder instead of
	an element count and rtx array.
	(rs6000_expand_extract_even): Update call accordingly.
	(rs6000_expand_interleave): Likewise.
	* config/sparc/sparc.md (vec_perm_constv8qi): Delete in favor of...
	* config/sparc/sparc.c (sparc_vectorize_vec_perm_const): ...this
	new function.
	(TARGET_VECTORIZE_VEC_PERM_CONST): Redefine.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* optabs.c (expand_vec_perm_1): Assert that SEL has an integer
	vector mode and that that mode matches the mode of the data
	being permuted.
	(expand_vec_perm): Split handling of non-CONST_VECTOR selectors
	out into expand_vec_perm_var.  Do all CONST_VECTOR handling here,
	directly using expand_vec_perm_1 when forcing selectors into
	registers.
	(expand_vec_perm_var): New function, split out from expand_vec_perm.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* optabs-query.h (can_vec_perm_p): Delete.
	(can_vec_perm_var_p, can_vec_perm_const_p): Declare.
	* optabs-query.c (can_vec_perm_p): Split into...
	(can_vec_perm_var_p, can_vec_perm_const_p): ...these two functions.
	(can_mult_highpart_p): Use can_vec_perm_const_p to test whether a
	particular selector is valid.
	* tree-ssa-forwprop.c (simplify_vector_constructor): Likewise.
	* tree-vect-data-refs.c (vect_grouped_store_supported): Likewise.
	(vect_grouped_load_supported): Likewise.
	(vect_shift_permute_load_chain): Likewise.
	* tree-vect-slp.c (vect_build_slp_tree_1): Likewise.
	(vect_transform_slp_perm_load): Likewise.
	* tree-vect-stmts.c (perm_mask_for_reverse): Likewise.
	(vectorizable_bswap): Likewise.
	(vect_gen_perm_mask_checked): Likewise.
	* fold-const.c (fold_ternary_loc): Likewise.  Don't take
	implementations of variable permutation vectors into account
	when deciding which selector to use.
	* tree-vect-loop.c (have_whole_vector_shift): Don't check whether
	vec_perm_const_optab is supported; instead use can_vec_perm_const_p
	with a false third argument.
	* tree-vect-generic.c (lower_vec_perm): Use can_vec_perm_const_p
	to test whether the constant selector is valid and can_vec_perm_var_p
	to test whether a variable selector is valid.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* optabs-query.h (can_vec_perm_p): Take a const vec_perm_indices *.
	* optabs-query.c (can_vec_perm_p): Likewise.
	* fold-const.c (fold_vec_perm): Take a const vec_perm_indices &
	instead of vec_perm_indices.
	* tree-vectorizer.h (vect_gen_perm_mask_any): Likewise,
	(vect_gen_perm_mask_checked): Likewise,
	* tree-vect-stmts.c (vect_gen_perm_mask_any): Likewise,
	(vect_gen_perm_mask_checked): Likewise,

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* optabs-query.h (qimode_for_vec_perm): Declare.
	* optabs-query.c (can_vec_perm_p): Split out qimode search to...
	(qimode_for_vec_perm): ...this new function.
	* optabs.c (expand_vec_perm): Use qimode_for_vec_perm.

2018-01-02  Aaron Sawdey  <acsawdey@linux.vnet.ibm.com>

	* rtlanal.c (canonicalize_condition): Return 0 if final rtx
	does not have a conditional at the top.

2018-01-02  Richard Biener  <rguenther@suse.de>

	* ipa-inline.c (big_speedup_p): Fix expression.

2018-01-02  Jan Hubicka  <hubicka@ucw.cz>

	PR target/81616
	* config/i386/x86-tune-costs.h: Increase cost of integer load costs
	for generic 4->6.

2018-01-02  Jan Hubicka  <hubicka@ucw.cz>

	PR target/81616
	Generic tuning.
	* x86-tune-costs.h (generic_cost): Reduce cost of FDIV 20->17,
	cost of sqrt 20->14, DIVSS 18->13, DIVSD 32->17, SQRtSS 30->14
	and SQRTsD 58->18, cond_not_taken_branch_cost. 2->1. Increase
	cond_taken_branch_cost 3->4.

2018-01-01  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/83581
	* tree-loop-distribution.c (pass_loop_distribution::execute): Return
	TODO_cleanup_cfg if any changes have been made.

	PR middle-end/83608
	* expr.c (store_expr_with_bounds): Use simplify_gen_subreg instead of
	convert_modes if target mode has the right side, but different mode
	class.

	PR middle-end/83609
	* expr.c (expand_assignment): Fix up a typo in simplify_gen_subreg
	last argument when extracting from CONCAT.  If either from_real or
	from_imag is NULL, use expansion through memory.  If result is not
	a CONCAT and simplify_gen_subreg fails, try to simplify_gen_subreg
	the parts directly to inner mode, if even that fails, use expansion
	through memory.

	PR middle-end/83623
	* expmed.c (expand_shift_1): For 2-byte rotates by BITS_PER_UNIT,
	check for bswap in mode rather than HImode and use that in expand_unop
	too.

Copyright (C) 2018 Free Software Foundation, Inc.

Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved.
