2013-07-21   OndÅej BÃ­lka  <neleai@seznam.cz>

	* gcc-interface/gigi.h: Likewise.
	* gcc-interface/trans.c: Likewise.
	* gcc-interface/utils2.c: Likewise.
	* gnat_rm.texi: Likewise.
	* gnat_ugn.texi: Likewise.
	* raise-gcc.c: Likewise.
	* sigtramp-ppcvxw.c: Likewise.
	* sysdep.c: Likewise.
	* terminals.c: Likewise.

2013-07-20  Eric Botcazou  <ebotcazou@adacore.com>

	PR ada/57934
	* gcc-interface/ada.h (CAT): Fix typo.

2013-07-08  Hristian Kirtchev  <kirtchev@adacore.com>

	* einfo.adb (Get_Pragma): Handle the retrieval of delayed
	pragmas stored in N_Contract nodes.
	* einfo.ads (Get_Pragma): Update the comment on usage.
	* sem_prag.adb (Check_Precondition_Postcondition): Retain a copy
	of the pragma when it applies to a body that acts as a spec. The
	copy is preanalyzed and chained on the contract of the body.

2013-07-08  Robert Dewar  <dewar@adacore.com>

	* rtsfind.adb: Minor comment fix.

2013-07-08  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch4.adb (Check_Ghost_Subprogram_Call): Do not check the placement
	of a Ghost function call when the enclosing context is being
	preanalyzed.

2013-07-08  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch6.adb (Expand_Inlined_Call, Process_Formals): If the
	expression in a return statement is a numeric literal, qualify
	it with the return type for proper resolution.

2013-07-08  Robert Dewar  <dewar@adacore.com>

	* sem.ads: Minor comment updates.
	* s-restri.ads, exp_ch6.adb, lib-load.ads, exp_ch3.adb, sem_ch10.adb:
	Minor reformatting.

2013-07-08  Robert Dewar  <dewar@adacore.com>

	* exp_attr.adb (Expand_N_Attribute_Reference): Add dummy entry
	for Restriction_Set.
	* gnat_rm.texi: Add missing menu entry for Attribute Ref Add
	documentation for attribute Restriction_Set.
	* lib-writ.adb (Write_With_Lines): Generate special W lines
	for Restriction_Set.
	* lib-writ.ads: Document special use of W lines for
	Restriction_Set.
	* lib.ads (Restriction_Set_Dependences): New table.
	* par-ch4.adb (Is_Parameterless_Attribute): Add Loop_Entry to
	list (Scan_Name_Extension_Apostrophe): Remove kludge test for
	Loop_Entry (Scan_Name_Extension_Apostrophe): Handle No_Dependence
	for Restricton_Set.
	* restrict.adb (Check_SPARK_Restriction): Put in Alfa order
	(OK_No_Dependence_Unit_Name): New function.
	* restrict.ads (OK_No_Dependence_Unit_Name): New function.
	* rtsfind.adb: Minor reformatting Minor code reorganization.
	* sem_attr.adb (Analyze_Attribute): Add processing for
	Restriction_Set.
	* sem_prag.adb (Process_Restrictions_Or_Restriction_Warnings):
	Remove Check_Unit_Name and use new function
	OK_No_Dependence_Unit_Name instead.
	* sinfo.ads: Minor comment updates.
	* snames.ads-tmpl: Add entry for Restriction_Set attribute.

2013-07-08  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch4.adb (Apply_Accessibility_Check): Remove local constant
	Pool_Id and local variable Free_Stmt. Do not deallocate the faulty
	object as "free" is not available on all targets/profiles.

2013-07-08  Robert Dewar  <dewar@adacore.com>

	* sem_ch13.adb (Analyze_Aspect_Specifications): Handle
	Storage_Size aspect for task type in case discriminant is
	referenced.
	(Analyze_Attribute_Definition_Clause): Do not flag Storage_Size
	attribute definition clause as obsolescent if from aspect.

2013-07-08  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Add documentation for Img returning a function.
	* par-prag.adb: Minor reformatting.
	* restrict.adb: Minor reformatting and code reorganization.

2013-07-08  Ed Schonberg  <schonberg@adacore.com>

	* sem_res.adb: add guard to ASIS transform.

2013-07-08  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch9.adb (Expand_N_Asynchronous_Select): If the trigger
	of the asynchronous select is a dispatching call, transform the
	abortable part into a procedure, to avoid duplication of local
	loop variables that may appear within.

2013-07-08  Vincent Celier  <celier@adacore.com>

	* projects.texi: Update the documentation of suffixes in package
	Naming.

2013-07-08  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch6.adb (Conforming_Types): Anonymous_access_to_subprograsm
	types are type conformant if the designated type of one is
	protected and the other is not. Convention only matters when
	checking subtype conformance.

2013-07-08  Ed Schonberg  <schonberg@adacore.com>

	* sem_res.adb (Make_Call_Into_Operator): In ASIS mode, propagate
	back the fully resolved operands to the original function call
	so that all semantic information remains available to ASIS.

2013-07-08  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch4.adb: minor reformatting (remove obsolete comment).
	* sem_ch9.adb: improve error message on illegal trigger.

2013-07-08  Robert Dewar  <dewar@adacore.com>

	* sem_prag.adb: Minor reformatting.

2013-07-08  Robert Dewar  <dewar@adacore.com>

	* gnatcmd.adb: Minor reformatting.

2013-07-08  Robert Dewar  <dewar@adacore.com>

	* targparm.adb (Get_Target_Parameters): Recognize pragma
	Partition_Elaboration_Policy.

2013-07-08  Robert Dewar  <dewar@adacore.com>

	* gnat_ugn.texi: Minor update to mention partition elaboration policy.

2013-07-08  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch4.adb (Comple_Object_Operation): Revert previous change.
	(Analyze_Indexed_Component_Form): In ASIS mode, if node has been
	transformed but not rewritten as a function call (as is the case
	in a generic), analyze it as such.

2013-07-08  Thomas Quinot  <quinot@adacore.com>

	* gnat_rm.texi: Minor rewording: add missing word "operators"
	in documentation for restriction No_Direct_Boolean_Operator.

2013-07-08  Robert Dewar  <dewar@adacore.com>

	* errout.adb (Set_Msg_Txt): No longer sets Is_Style_Msg,
	Is_Warning_Msg, or Is_Unconditional_Msg (all are set elsewhere
	now).
	* errout.ads: Insertions ! and !! no longer have to be at the
	end of the message, they can be anywhere in the message.
	* erroutc.adb (Test_Style_Warning_Serious_Unconditional_Msg):
	Replaces Test_Style_Warning_Serious_Msg
	* erroutc.ads (Has_Double_Exclam): New flag New comments for
	existing flags (Test_Style_Warning_Serious_Unconditional_Msg):
	Replaces Test_Style_Warning_Serious_Msg
	* errutil.adb (Test_Style_Warning_Serious_Unconditional_Msg):
	Replaces Test_Style_Warning_Serious_Msg

2013-07-08  Robert Dewar  <dewar@adacore.com>

	* par-prag.adb (Process_Restrictions_Or_Restriction_Warnings):
	Recognize SPARK_05 as synonym for SPARK in restrictions pragma.
	* restrict.ads, restrict.adb (SPARK_Hides): Table moved to body, only
	referenced there.
	* scng.adb, sem_ch3.adb, sem_ch4.adb, sem_ch5.adb, sem_ch8.adb,
	sem_res.adb, sem_util.adb: Use restriction SPARK_05 instead of SPARK.
	* snames.ads-tmpl (Name_No_Obsolescent_Features): New entry.

2013-07-08  Vincent Celier  <celier@adacore.com>

	* gnatcmd.adb (Check_Files): Use a response file for gnatls
	when possible.

2013-07-08  Gary Dismukes  <dismukes@adacore.com>

	* freeze.adb: Minor typo fixes.

2013-07-08  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Document SPARK_05 (replaces SPARK) Document
	obsolete recognition of SPARK Document all other obsolete synonyms
	for old restrictions.
	* restrict.adb (Check_SPARK_Restriction): SPARK_05 replaces
	SPARK (Process_Restriction_Synonyms): Handle SPARK as synonym
	for SPARK_05.
	* restrict.ads: Restriction SPARK_05 replaces SPARK.
	* s-rident.ads: Replace restriction SPARK by SPARK_05 Add SPARK
	as synonym for SPARK_05.
	* sem_prag.adb: Minor reformatting.
	* snames.ads-tmpl: Add entries for Name_SPARK and Name_SPARK_05.

2013-07-08  Robert Dewar  <dewar@adacore.com>

	* sem_dim.adb: Minor error message change.
	* freeze.adb (Freeze_Entity, array type case): Extend handling
	of Implicit_Packing to handle multi-dimensional array case.
	* gnat_rm.texi: Update doc on Implicit_Packing.

2013-07-08  Robert Dewar  <dewar@adacore.com>

	* exp_ch4.adb: Minor reformatting.

2013-07-08  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch4.adb (Complete_Object_Operation): In ASIS mode, if
	the parent node is a selected component and the analysis as a
	call is successful, set the type of the selector in the parent
	node for subsequent checks, because the rewriting of the node
	does not take place during pre-analysis.

 2013-07-08  Robert Dewar  <dewar@adacore.com>

	* sem_ch8.adb, exp_ch3.adb: Minor reformatting.

2013-07-08  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch4.adb (Expand_N_Op_Eq): When comparing two
	Bounded_Strings, use the predefined equality function of the
	root Super_String type.

2013-07-08  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch4.adb (Create_Alternative): Removed.
	(Expand_N_If_Expression): Remove constant
	In_Case_Or_If_Expression. Add local variable
	Ptr_Typ. Inspect the "then" and "else" action lists
	for transient controlled objects and generate code to
	finalize them.	(Is_Controlled_Function_Call): Removed.
	(Process_Action): Update the comment on usage. Update the call
	to Process_Transient_Object. There is no need to continue the
	traversal of the object itself.
	(Process_Actions): New routine.
	(Process_Transient_Object): Moved to the top level of Exp_Ch4. Add
	a new formal and update the related comment on usage.
	* exp_util.adb (Within_Case_Or_If_Expression): Start the search
	from the parent of the node.

2013-07-08  Robert Dewar  <dewar@adacore.com>

	* a-cusyqu.ads, a-cbprqu.ads, s-interr.ads, a-cuprqu.ads,
	a-cbsyqu.ads: Minor reformatting (proper formatting of overriding).

2013-07-08  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch8.adb (Attribute_Renaming): Treat 'Img as an attribute
	that can be renamed as a function.

2013-07-08  Thomas Quinot  <quinot@adacore.com>

	* g-socket.ads: Document target dependency: FIONBIO may or may not
	be inherited from listening socket by accepted socket.

2013-07-08  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch4.adb (Apply_Accessibility_Check): Do not deallocate the object
	on targets that can't deallocate.

2013-07-08  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch3.adb (Freeze_Type): Generate a
	subpools-related accessibility check only on profiles that
	include the corresponding library unit.

2013-07-08  Gary Dismukes  <dismukes@adacore.com>

	* sem_ch8.adb: Minor typo fixes.

2013-07-08  Javier Miranda  <miranda@adacore.com>

	* sem_ch8.adb (Save_Scope_Stack): Adding documentation.
	(Restore_Scope_Stack): Remove the elements of the list when the
	visibility of each entity is restored.

2013-07-08  Robert Dewar  <dewar@adacore.com>

	* exp_ch9.adb, sem.ads, sem_util.adb: Minor reformatting.

2013-07-08  Robert Dewar  <dewar@adacore.com>

	* sem_ch8.adb, sem_ch8.ads: Minor reformatting.

2013-07-08  Gary Dismukes  <dismukes@adacore.com>

	* gnat_rm.texi: Minor reformatting and rewording for consistency.

2013-07-08  Bob Duff  <duff@adacore.com>

	* exp_ch3.adb (Build_Master): If Desig_Type is an incomplete
	view coming from a limited-with'ed package, use the nonlimited
	view in case it has tasks.

2013-07-08  Javier Miranda  <miranda@adacore.com>

	* sem_ch8.ad[sb] (Save_Scope_Stack): Modified to return the list
	of entities which have been temporarily removed from immediate
	visibility.
	(Restore_Scope_Stack): Modified to receive an
	additional parameter with the list of entities whose immediate
	visibility must be restored.
	* sem.adb (Do_Analyze): Use new version of
	Save_Scope_Stack/Restore_Scope_Stack
	* sem_ch12.adb (Inline_Instance_Body): Use new version of
	Save_Scope_Stack and Restore_Scope_Stack

2013-07-08  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Analyze_Pragma): Remove
	variable Unit_Prag. Remove the check on duplicate mode for the
	configuration form of the pragma.
	(Redefinition_Error): Removed.

2013-07-08  Robert Dewar  <dewar@adacore.com>

	* lib.ads, gnat_rm.texi, einfo.ads, sem_ch13.adb: Minor reformatting
	and editing.

2013-07-08  Ed Schonberg  <schonberg@adacore.com>

	* sem_prag.adb (Analyze_PPC_In_Decl_Part): In ASIS mode,
	pre-analyze only the original expression attached to the source
	aspect, not the relocated expression of the pragma, to prevent
	malformed trees in ASIS mode.
	* sem_ch13.adb (Analyze_Aspect_Specifications): Revert previous
	patch: the expression in the aspect for pre/post must be relocated
	to the pragma for proper analysis.

2013-07-05  Hristian Kirtchev  <kirtchev@adacore.com>

	* aspects.adb: Add an entry for SPARK_Mode in table Canonical_Aspect.
	* aspects.ads: Add an entry for SPARK_Mode in tables Aspect_Id,
	Aspect_Argument, Aspect_Names.
	* atree.adb (Node32): New routine.
	(Set_Node32): New routine.
	* atree.ads (Node32): New routine.
	(Set_Node32): New routine.
	* einfo.adb: Node32 is now used as SPARK_Mode_Pragmas.
	(Set_SPARK_Mode_Pragmas): New routine.
	(SPARK_Mode_Pragmas): New routine.
	(Write_Field32_Name): Add and entry for SPARK_Modes.
	* einfo.ads: Add attribute SPARK_Mode_Pragmas along with usage
	in various entities.
	(Set_SPARK_Mode_Pragmas): New routine and
	pragma Inline.
	(SPARK_Mode_Pragmas): New routine and pragma Inline.
	* gnat_rm.texi: Add sections explaining the syntax and semantics
	of aspect/pragma SPARK_Mode.
	* gnat_ugn.texi: Add pragma SPARK_Mode to the list of
	configuration pragmas.
	* lib.adb (Set_SPARK_Mode_Pragma): New routine.
	(SPARK_Mode_Pragma): New routine.
	* lib.ads: Alphabetize the comments on fields of record
	Unit_Record. Add new field SPARK_Mode_Pragma along with
	comment on its usage. Update the layout of record Unit_Record.
	(Set_SPARK_Mode_Pragma): New routine and pragma Inline.
	(SPARK_Mode_Pragma): New routine and pragma Inline.
	* lib-load.adb (Create_Dummy_Package_Unit): Initialize
	field SPARK_Mode_Pragma.
	(Load_Main_Source): Initialize field SPARK_Mode_Pragma.
	(Load_Unit): Initialize field SPARK_Mode_Pragma.
	* lib-writ.adb (Add_Preprocessing_Dependency): Initialize field
	SPARK_Mode_Pragma.
	(Ensure_System_Dependency): Initialize field SPARK_Mode_Pragma.
	* opt.ads: Alphabetize verification flags. Store the
	compilation-wide SPARK mode in variable Global_SPARK_Mode.
	* par-prag.adb: Pragma SPARK_Mode does not need special processing
	by the parser.
	* sem_ch13.adb (Analyze_Aspect_Specifications): Convert aspect
	SPARK_Mode into a pragma.
	(Check_Aspect_At_Freeze_Point): Aspect SPARK_Mode does not need
	delayed processing.
	* sem_prag.adb: Add an entry for SPARK_Mode in table Sig_Flags.
	(Analyze_Pragma): Add processing for pragma SPARK_Mode.
	(Get_SPARK_Mode_Id): New routine.
	(Is_Elaboration_SPARK_Mode): New routine.
	(Is_Private_SPARK_Mode): New routine.
	* sem_prag.ads (Get_SPARK_Mode_Id): New routine.
	(Is_Elaboration_SPARK_Mode): New routine.
	(Is_Private_SPARK_Mode): New routine.
	* sinfo.ads: Update the comment on the usage of field Next_Pragma.
	* snames.ads-tmpl: Add new predefined name for SPARK_Mode and
	Auto. Add new pragma Id for SPARK_Mode.
	* types.ads: Add new type SPARK_Mode_Id.

2013-07-05  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch13.adb (Analyze_Aspect_Specifications): For
	pre/postconditions copy the expression to the generated pragma,
	to avoid sharing between the original aspect and the pragma node,
	because in ASIS_Mode both will be independently analyzed.

2013-07-05  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch3.adb (Build_Variant_Record_Equality): Add pairs of
	formals for each discriminant of an unchecked union.
	(Make_Eq_Case): Suprogram accepts a list of discriminants. Nested
	variants are supported. New helper function Corresponding_Formal.
	* exp_ch4.adb (Build_Equality_Call): For unchecked unions,
	loop through discriminants to create list of inferred values,
	and modify call to equality routine accordingly.

2013-07-05  Claire Dross  <dross@adacore.com>

	* a-cfdlli.ads, a-cfhama.ads, a-cfhase.ads, a-cforma.ads,
	a-cforse.ads, a-cofove.ads: Add preconditions when needed +
	container types are not tagged any more.

2013-07-05  Thomas Quinot  <quinot@adacore.com>

	* freeze.adb (Freeze_Entity): For an object with captured
	initialization statements, do not remove Init_Stmts from the
	enclosing list, as Freeze_All might rely on it to know where to
	stop freezing.

2013-07-05  Robert Dewar  <dewar@adacore.com>

	* exp_ch4.adb, a-cfdlli.ads, a-ngelfu.ads, s-bignum.adb: Minor
	reformatting.

2013-07-05  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch4.adb (Expand_Composite_Equality): Use the full view
	when the base type is private.

2013-07-05  Claire Dross  <dross@adacore.com>

	* a-cfdlli.ads: Add preconditions when needed.

2013-07-05  Robert Dewar  <dewar@adacore.com>

	* sem_ch8.adb: Minor reformatting.

2013-07-05  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch3.adb (Access_Subprogram_Declaration): Use
	Generate_Reference_To_Formals.
	* lib-xref.adb (Generate_Reference_To_Formals): In the case of
	access to subprograms, the formals are found in the designated
	subprogram type.

2013-07-05  Robert Dewar  <dewar@adacore.com>

	* gnat_ugn.texi: Document that comments can be lined up with
	previous non-blank line.
	* styleg.adb (Check_Comment): Allow indentation to match previous
	non-blank line (Same_Column_As_Previous_Line): New function

2013-07-05  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Update doc on missing pragmas.
	* sem_ch12.adb: Minor comment additions.

2013-07-05  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Analyze_Pragma): Ensure that
	Contract_Cases, Depends and Global are analyzed when they apply
	to a subprogram compilation unit. The pragmas are all added
	unconditionally to the construct's contract. This ensures that
	proof tools can locate the pragmas.

2013-07-05  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch8.adb (Freeze_Actual_Profile): An instance within
	a generic unit does not freeze a generic private type of the
	enclosing generic. This rule must also apply to a type derived
	from a generic private type.

2013-07-05  Arnaud Charlet  <charlet@adacore.com>

	* gnat_rm.texi: Add missing documentation for pragmas.

2013-07-05  Yannick Moy  <moy@adacore.com>

	* sem_ch12.adb: Minor comment.

2013-07-05  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Document that -gnatR and -gnatD cannot be used
	together.
	* switch-c.adb: Do not allow -gnatD and -gnatR to both be
	specified.

2013-07-05  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Add missing documentation for pragmas.
	* sem_ch8.adb: Minor reformatting.
	* gnat_ugn.texi: Document that -gnatR and -gnatD cannot be used
	together.

2013-07-05  Yannick Moy  <moy@adacore.com>

	* sem_ch12.ads, sem_ch12.adb (Need_Subprogram_Instance_Body): Force
	instance of subprogram body in SPARK mode, by testing Expander_Active
	(set in SPARK mode) instead of Full_Expander_Active (not set in
	SPARK mode).
	* sem_ch8.adb: Minor reformatting.

2013-07-05  Robert Dewar  <dewar@adacore.com>

	* freeze.adb (Freeze_Entity): Remove test of obsolete flag
	Propagate_Exceptions, and associated useless code that did
	nothing.
	* gnat_rm.texi: Add documentation for obsolete pragma
	Propagate_Exceptions.
	* opt.ads (Propagate_Exceptions): Obsolete flag removed.
	* sem_prag.adb (Analyze_Pragma, case Propagate_Exceptions):
	Remove useless and obsolete setting of Propagate_Exceptions flag.

2013-07-05  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi, sem_prag.adb: Minor comment/text fixes.

2013-07-05  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Add missing doc for various pragmas.

2013-07-05  Robert Dewar  <dewar@adacore.com>

	* par_sco.adb, sem_ch12.adb, par-ch5.adb: Minor reformatting.
	* gnat_rm.texi: Document pragma Profile_Warnings.
	* restrict.ads, sem_prag.adb: Minor reformatting.

2013-07-05  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch12.adb (Check_Formal_Package_Instance): Handle properly
	a formal subprogram that was defaulted in the formal package.

2013-07-05  Thomas Quinot  <quinot@adacore.com>

	* par_sco.adb (Traverse_Declarations_Or_Statements): Ignore
	N_Implicit_Label_Declaration nodes.

2013-07-05  Robert Dewar  <dewar@adacore.com>

	* a-cfhase.adb, sem_prag.adb, a-cfhama.adb: Minor reformatting.

2013-07-05  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch12.adb (Copy_Generic_Node): Check that name in function
	call is a valid entity name before preserving entity in generic
	copy.

2013-07-05  Thomas Quinot  <quinot@adacore.com>

	* par-ch5.adb: Minor reformatting.

2013-07-05  Thomas Quinot  <quinot@adacore.com>

	* sinfo.ads: Minor clarification to documentation for
	N_Implicit_Label_Declaration.

2013-07-05  Hristian Kirtchev  <kirtchev@adacore.com>

	* a-except-2005.adb, a-except.adb: Add constant Rmsg_17. Correct the
	values of all remaining constants.
	(Rcheck_35): New routine along with pragmas Export and No_Return.
	(Rcheck_PE_Aliased_Parameters): New routine along with pragmas
	Export and No_Return.
	(Rcheck_PE_All_Guards_Closed,
	Rcheck_PE_Bad_Predicated_Generic_Type,
	Rcheck_PE_Current_Task_In_Entry_Body,
	Rcheck_PE_Duplicated_Entry_Address, Rcheck_PE_Explicit_Raise,
	Rcheck_PE_Implicit_Return, Rcheck_PE_Misaligned_Address_Value,
	Rcheck_PE_Missing_Return, Rcheck_PE_Overlaid_Controlled_Object,
	Rcheck_PE_Potentially_Blocking_Operation
	Rcheck_PE_Stubbed_Subprogram_Called,
	Rcheck_PE_Unchecked_Union_Restriction,
	Rcheck_PE_Non_Transportable_Actual, Rcheck_SE_Empty_Storage_Pool,
	Rcheck_SE_Explicit_Raise, Rcheck_SE_Infinite_Recursion,
	Rcheck_SE_Object_Too_Large, Rcheck_PE_Finalize_Raised_Exception):
	Update the use of Rmsg_XX.
	(Rcheck_17, Rcheck_18, Rcheck_19,
	Rcheck_20, Rcheck_21, Rcheck_22, Rcheck_23, Rcheck_24, Rcheck_25,
	Rcheck_26, Rcheck_27, Rcheck_28, Rcheck_29, Rcheck_30, Rcheck_31,
	Rcheck_32, Rcheck_33, Rcheck_34, Rcheck_35): Update corresponding
	renamed subprograms.
	* checks.adb: Add with and use clause for Stringt.
	(Apply_Parameter_Aliasing_Checks): Make constant Loc visible in
	all subprograms of Apply_Parameter_Aliasing_Checks. Remove local
	variable Cond. Initialize Check at the start of the routine. Use
	routine Overlap_Check to construct a simple or a detailed run-time
	check. Update the creation of the simple check.
	(Overlap_Check): New routine.
	* exp_ch11.adb (Get_RT_Exception_Name): Add a value for
	PE_Aliased_Parameters.
	* types.ads: Add new enumeration literal
	PE_Aliased_Parameters. Update the corresponding integer values
	of all RT_Exception_Code literals.
	* types.h: Add new constant PE_Aliased_Parameters. Correct the
	values of all remaining constants.

2013-07-05  Yannick Moy  <moy@adacore.com>

	* gnat_rm.texi: Minor renaming of SPARK into SPARK 2005 in
	documentation.

2013-07-05  Ed Schonberg  <schonberg@adacore.com>

	* sem_prag.adb (Analyze_PPC_In_Decl_Part): For a class-wide
	condition, when replacing the name of a formal by a conversion
	to the class-wide type, exempt selector names that appear in
	parameter associations.

2013-06-13  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/ada-tree.h (DECL_BY_DOUBLE_REF_P): Delete.
	* gcc-interface/gigi.h (annotate_object): Adjust prototype.
	(convert_vms_descriptor): Likewise.
	* gcc-interface/decl.c (gnat_to_gnu_param): Do not pass fat pointer
	types by double dereference.
	(annotate_object): Remove BY_DOUBLE_REF parameter and adjust.
	(gnat_to_gnu_entity): Adjust calls to annotate_object.
	* gcc-interface/trans.c (Identifier_to_gnu): Do not deal with double
	dereference.
	(Call_to_gnu): Likewise.
	(build_function_stub): Adjust call to convert_vms_descriptor.
	(Subprogram_Body_to_gnu): Adjust call to annotate_object.
	* gcc-interface/utils.c (convert_vms_descriptor): Remove BY_REF
	parameter and adjust.

2013-05-30  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/Makefile.in (arm% androideabi): Robustify.

2013-05-26  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/decl.c: (gnat_to_gnu_entity): In ASIS mode, do not
	check that access types have a set size.

2013-05-26  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/decl.c (vinfo_t): New type and associated vector.
	(components_to_record): Change return type to bool.
	Lay out the variants in two passes.  Do not force a specific layout for
	the variant part if the variants do not have a representation clause.
	Take the alignment of the variant part into account when laying out
	variants without rep clause in a record type with a partial rep clause.
	(create_rep_part): Do not set the position of the field.

2013-05-26  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/trans.c (Attribute_to_gnu) <Attr_Last_Bit>: Add kludge
	to avoid generating an overflow for -1.

2013-05-26  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/gigi.h (create_type_decl): Adjust prototype.
	(create_label_decl): Complete prototype.
	(process_attributes): Declare.
	* gcc-interface/decl.c (gnat_to_gnu_entity): Adjust multiple calls to
	create_type_decl throughout.
	<E_Enumeration_Type>: Do the layout of the type manually and call
	process_attributes on it.  Reindent.
	<E_Enumeration_Subtype>: Minor tweak.
	<E_Floating_Point_Subtype>: Reindent.
	<E_Array_Subtype>: Call process_attributes on the array type built
	for a packed array type.
	<E_Record_Type>: Call process_attributes on the type.
	<E_Record_Subtype>: Likewise.
	<E_Access_Type>: Likewise.
	<E_Subprogram_Type>: Likewise.
	Likewise for all types at the end of the processing.
	* gcc-interface/utils.c (make_aligning_type): Adjust call to
	create_type_decl.
	(maybe_pad_type): Likewise.
	(create_index_type): Likewise.
	(create_type_decl): Remove attr_list parameter and associated code.
	(create_var_decl_1): Call process_attributes on the variable.
	(process_attributes): Take a pointer to the object and add in_place
	and gnat_node parameters and adjust throughout.
	<ATTR_MACHINE_ATTRIBUTE>: Pass ATTR_FLAG_TYPE_IN_PLACE only on demand
	and set the input location.
	Zap the attribute list at the end.
	(create_subprog_decl): Call process_attributes on the subprogram.
	(build_unc_object_type): Adjust call to create_type_decl.
	(handle_vector_type_attribute): Remove dead code.

2013-05-26  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/gigi.h (make_aligning_type): Adjust prototype.
	* gcc-interface/utils.c (make_aligning_type): Take GNAT_NODE parameter
	for the position of the associated TYPE_DECL.
	* gcc-interface/decl.c (gnat_to_gnu_entity): Adjust call to above.
	* gcc-interface/utils2.c (maybe_wrap_malloc): Likewise.

2013-05-26  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/decl.c (gnat_to_gnu_entity): Do not prematurely
	elaborate the full view of a type with a freeze node.
	* gcc-interface/trans.c (process_type): Add explicit predicate.

2013-05-26  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/decl.c (gnat_to_gnu_entity) <object>: Always build the
	UNC variable for aliased objects with unconstrained nominal subtype.

2013-05-24  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/gigi.h (gnat_init_gcc_fp): Declare.
	* gcc-interface/trans.c (gigi): Call it.
	* gcc-interface/misc.c (gnat_init_gcc_fp): New function.

2013-05-24  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/gigi.h (enum inline_status_t): New type.
	(create_subprog_decl): Adjust prototype.
	* gcc-interface/decl.c (gnat_to_gnu_entity) <E_Procedure>: Adjust
	calls to create_subprog_decl.
	(get_minimal_subprog_decl): Likewise.
	* gcc-interface/trans.c (gigi): Likewise.
	(build_raise_check): Likewise.
	(establish_gnat_vms_condition_handler): Likewise.
	(Compilation_Unit_to_gnu): Likewise.
	(gnat_to_gnu): Likewise.
	* gcc-interface/utils.c (create_subprog_decl): Change inline_flag
	parameter to inline_status and implement for suppressed inlining.

2013-05-24  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/ada-tree.h (LOOP_STMT_NO_UNROLL): New define.
	(LOOP_STMT_UNROLL): Likewise.
	(LOOP_STMT_NO_VECTOR): Likewise.
	(LOOP_STMT_VECTOR): Likewise.
	* gcc-interface/trans.c (struct loop_info_d): Replace label field
	with stmt field.
	(Pragma_to_gnu) <Pragma_Loop_Optimize>: New case.
	(Loop_Statement_to_gnu): Save the loop statement onto the stack
	instead of the label.
	(gnat_to_gnu) <N_Exit_Statement>: Retrieve the loop label.

2013-05-24  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/trans.c: Include diagnostic.h and opts.h.
	(Pragma_to_gnu) <Pragma_Warnings>: New case.

2013-05-24  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/decl.c (gnat_to_gnu_entity) <E_Record_Type>: Constify
	a handful of local variables.
	For a derived untagged type that renames discriminants, change the type
	of the stored discriminants to a subtype with the bounds of the type
	of the visible discriminants.
	(build_subst_list): Rename local variable.

2013-05-16  Jason Merrill  <jason@redhat.com>

	* gcc-interface/Make-lang.in (gnat1$(exeext)): Use link mutex.

2013-05-13  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	PR ada/57188
	* gcc-interface/Makefile.in: Allow for amd64 solaris2.

2013-05-07  Eric Botcazou  <ebotcazou@adacore.com>

	PR ada/56474
	* gcc-interface/decl.c (gnat_to_gnu_entity) <E_Array_Subtype>: Use
	int_const_binop to shift bounds by 1 when they are integer constants.

2013-04-25  Arnaud Charlet  <charlet@adacore.com>>

	* gcc-interface/Makefile.in (ADA_EXCLUDE_SRCS): Exclude s-init.ad{s,b}

2013-04-25  Hristian Kirtchev  <kirtchev@adacore.com>

	* checks.adb (Apply_Predicate_Check): Update the comment associated
	with the call to Check_Expression_Against_Static_Predicate.
	* sem_ch3.adb (Analyze_Object_Declaration): Update the comment
	associated with the call to Check_Expression_Against_Static_Predicate.
	* sem_util.adb (Check_Expression_Against_Static_Predicate):
	Broaden the check from a static expression to an expression with
	a known value at compile time.
	* sem_util.ads (Check_Expression_Against_Static_Predicate): Update
	comment on usage.

2013-04-25  Thomas Quinot  <quinot@adacore.com>

	* exp_attr.adb (Expand_N_Attribute_Reference, cases Position,
	First_Bit, and Last_Bit): Fix incorrect test in implementation of
	RM 2005 13.5.2(3/2).

2013-04-25  Claire Dross  <dross@adacore.com>

	* a-cfhase.adb, a-cfhase.ads, a-cforma.adb, a-cforma.ads, a-cfhama.adb,
	a-cfhama.ads, a-cforse.adb, a-cforse.ads, a-cofove.adb, a-cofove.ads
	(Query_Element): Removed.
	(Update_Element): Removed.
	(Insert): The version with no New_Item specified is removed.
	(Iterate): Removed.
	(Write): Removed.
	(Read): Removed.
	Every check of fields Busy and Lock has been removed.

2013-04-25  Robert Dewar  <dewar@adacore.com>

	* sem_prag.adb (Analyze_Pragma, case Contract_Cases): Remove
	call to S14_Pragma (Find_Related_Subprogram): Require proper
	placement in subprogram body (Find_Related_Subprogram): Detect
	duplicates for all cases (Find_Related_Subprogram): Handle case
	of spec nested inside body.

2013-04-25  Arnaud Charlet  <charlet@adacore.com>

	* par-prag.adb: Fix typo.

2013-04-25  Hristian Kirtchev  <kirtchev@adacore.com>

	* checks.adb (Apply_Predicate_Check): If the type has a static
	predicate and the expression is also static, check whether the
	expression satisfies the predicate.
	* sem_ch3.adb (Analyze_Object_Declaration): If the type has a
	static predicate and the expression is also static, see if the
	expression satisfies the predicate.
	* sem_util.adb: Alphabetize several routines.
	(Check_Expression_Against_Static_Predicate): New routine.
	* sem_util.ads (Check_Expression_Against_Static_Predicate): New routine.

2013-04-25  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Document Reason argument for pragma Warnings.
	* par-prag.adb: Handle Reason parameter for pragma Warnings.
	* sem_prag.adb (Analyze_Pragma, case Warnings): Allow Reason argument.
	* snames.ads-tmpl (Name_Reason): New name entry.

2013-04-25  Yannick Moy  <moy@adacore.com>

	* exp_spark.adb (Expand_SPARK_N_In): Remove procedure.
	(Expand_SPARK): Remove special expansion for membership tests.

2013-04-25  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch3.adb (Expand_N_Object_Declaration): Update all places
	that should use constant Base_Typ. When building an invariant
	check, account for invariants coming from the base type. Prevent
	the creation of a junk invariant check when the related object
	is of an array type and it is initialized with an aggregate.
	* exp_util.adb (Make_Invariant_Call): Typ is now a variable. Use
	the base type to create an invariant call when the type of the
	expression is a composite subtype.

2013-04-25  Vasiliy Fofanov  <fofanov@adacore.com>

	* a-cborse.adb: Fix minor typo.

2013-04-25  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch6.adb (Different_Generic_Profile): A spec and body
	match in an instance if a subtype declaration that renames a
	generic actual with the same name appears between spec and body.

2013-04-25  Robert Dewar  <dewar@adacore.com>

	* sem_util.adb: Minor reformatting.

2013-04-25  Ed Schonberg  <schonberg@adacore.com>

	* exp_aggr.adb (Expand_N_Aggregate): Use special circuitry to
	fold strings with a single others choice only if there are no
	expressions in the aggregate.

2013-04-25  Arnaud Charlet  <charlet@adacore.com>

	* gnat_ugn.texi: Update doc on Ada 2012 default mode.

2013-04-25  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch6.adb: Add with and use clause for Stringt.
	(Expand_Contract_Cases): Moved from sem_ch6. Add formal parameters
	Decls and Stmts along with comments on their usage.
	* exp_ch6.ads (Expand_Contract_Cases): Moved from sem_ch6.
	* sem_ch6.adb (Expand_Contract_Cases): Moved to exp_ch6.
	(Process_Contract_Cases): Update the call to Expand_Contract_Cases.

2013-04-25  Ed Schonberg  <schonberg@adacore.com>

	* gnat_rm.texi: Minor editing, to clarify use of dimension aspects.
	* sem_util.adb (Is_OK_Variable_For_Out_Formal): Reject an
	aggregate for a packed type, which may be converted into an
	unchecked conversion of an object.

2013-04-25  Robert Dewar  <dewar@adacore.com>

	* sem_prag.adb: Minor code reorganization (correct misspelling
	Restiction).
	* sem_util.adb, aspects.ads, sem_ch6.adb: Minor reformatting.
	* gnat_rm.texi: Document impl-defined aspects.
	* sem_dim.adb, sem_dim.ads, gnat_ugn.texi, s-dimmks.ads: Minor
	reformatting.

2013-04-25  Hristian Kirtchev  <kirtchev@adacore.com>

	* einfo.adb (Set_Abstract_States): The attribute now applies
	to generic packages.
	* sem_ch4.adb (Referenced): Moved to sem_util.
	* sem_ch7.adb (Unit_Requires_Body): A [generic] package with
	a non-null abstract state needs a body.
	* sem_prag.adb (Analyze_Depends_In_Decl_Part): Update the calls
	to Collect_Subprogram_Inputs_Outputs.
	(Analyze_Global_Item): Verify the proper usage of an item with mode
	In_Out or Output relative to the enclosing context.
	(Analyze_Pragma): Abstract_State can now be applied to a generic
	package. Do not reset the Analyzed flag for pragmas Depends and Global
	as this is not needed.
	(Appears_In): Moved to library level.
	(Check_Mode_Restiction_In_Enclosing_Context): New routine.
	(Collect_Subprogram_Inputs_Outputs): Moved to library level. Add
	formal parameters Subp_Id, Subp_Inputs, Subp_Outputs and Global
	seen along with comments on usage.
	* sem_util.ads, sem_util.adb (Referenced): New routine.

2013-04-25  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch6.adb (Expand_Contract_Cases): Generate
	detailed error messages only when switch -gnateE is in effect.

2013-04-25  Yannick Moy  <moy@adacore.com>

	* sem_attr.adb (Analyze_Attribute): Do not issue
	an error for a possibly misplaced 'Result or 'Old attribute when
	analyzing the aspect.

2013-04-25  Robert Dewar  <dewar@adacore.com>

	* sem_ch12.adb, sem_util.adb, sem_ch4.adb: Minor reformatting.

2013-04-25  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch4.adb (Analyze_Quantified_Expression):
	Add local variable Loop_Id. Verify that the loop variable
	is used within the condition of the quantified expression.
	(Referenced): New routine.

2013-04-25  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_case.adb (Analyze_Choices): Enhance the error message
	given on a bad use of subtype predicate.
	* sem_ch5.adb (Analyze_Loop_Parameter_Specification): Enhance
	the error message given on a bad use of subtype predicate.
	* sem_util.adb (Bad_Predicated_Subtype_Use): Add formal parameter
	Suggest_Static. Emit an extra error message advising how to
	remedy the bad use of the predicate if the context warrants it.
	* sem_util.ads (Bad_Predicated_Subtype_Use): Add formal parameter
	Suggest_Static along with a comment explaining its usage.

2013-04-25  Ed Schonberg  <schonberg@adacore.com>

	* sem_disp.adb (Check_Dispatching_Operation): Further refinement
	to checks for AI05-0125: the check for a hidden primitive that
	may be overridden by the new declaration only applies if the
	hidden operation is never declared. This is not the case if the
	operation is declared in a parent unit.

2013-04-25  Robert Dewar  <dewar@adacore.com>

	* debug.adb: Remove d.X and d.Y entries and documentation.
	* exp_ch4.adb (Expand_N_If_Expression): Remove special code used
	if expression with actions not available (now always available).
	(Expand_Short_Circuit_Operator): Same change.
	* gnat1drv.adb (Adjust_Global_Switches) Remove setting
	Use_Expression_With_Actions flag, since this is now obsolete.
	* opt.ads (Use_Expression_Actions): Removed (always True now).
	* sinfo.ads: Minor comment updates.

2013-04-25  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch12.adb (Check_Generic_Actuals): If an actual is an array
	subtype whose base type is currently private, install full view
	when compiling instance body.

2013-04-25  Ed Schonberg  <schonberg@adacore.com>

	* sem_disp.adb (Check_Dispatching_Operation): Refine checks for
	AI05-0125: the check for a hidden primitive that may be overridden
	by the new declaration is only performed if the declaration comes
	from source, and it must carry an explicit overriding indicator.

2013-04-25  Hristian Kirtchev  <kirtchev@adacore.com>

	* einfo.adb (Abstract_States): The attribute now applies to
	generic packages.
	* sem_ch3.adb (Analyze_Object_Declaration): Check whether an
	object declaration introduces an illegal hidden state.
	* sem_prag.adb (Analyze_Abstract_State): Check whether a state
	declaration introduces an illegal hidden state.
	* sem_util.ads, sem_util.adb (Check_No_Hidden_State): New routine.

2013-04-25  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch6.adb (Is_Build_In_Place_Function_Call): The call may
	be to a protected function, in which case the name in the call
	is a selected component.

2013-04-25  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch4.adb (Analyze_Quantified_Expression):
	Warn on a suspicious use of quantifier "some" when "all" was meant.
	(No_Else_Or_Trivial_True): New routine.

2013-04-25  Robert Dewar  <dewar@adacore.com>

	* einfo.ads, einfo.adb: Put back with/use for Namet.
	(Get_Pragma): New name (wi new spec) for Find_Pragma.
	* sem_ch6.adb: Change name Find_Pragma to Get_Pragma with
	different interface.

2013-04-25  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch3.adb (Is_Visible_Component): In an instance all
	components are visible.

2013-04-25  Matthew Heaney  <heaney@adacore.com>

	* a-rbtgbo.adb, a-crbtgo.adb (Generic_Equal): do not test for
	tampering when container empty.
	* a-crbtgk.adb (Ceiling, Find, Floor): ditto.
	(Generic_Conditional_Insert, Generic_Conditional_Insert_With_Hint):
	ditto.

2013-04-25  Ed Schonberg  <schonberg@adacore.com>

	* par-ch12.adb: Move aspects from package specification to
	generic package declaration.
	* sem_ch12.adb: Analyze aspect specifications before building
	and analyzing the generic copy, so that the generated pragmas
	are properly taken into account.
	* sem_ch13.adb: For compilation unit aspects that apply to a
	generic package declaration, insert corresponding pragmas ahead
	of visible declarations.
	* sprint.adb: Display properly the aspects of a generic type
	declaration.

2013-04-25  Robert Dewar  <dewar@adacore.com>

	* frontend.adb: Minor reformatting.

2013-04-25  Ed Schonberg  <schonberg@adacore.com>

	* einfo.ads: Extend documentation on use of Is_Private_Ancestor
	for untagged types.
	* sem_ch3.adb (Is_Visible_Component): Refine predicate for the
	case of untagged types derived from private types, to reject
	illegal selected components.

2013-04-25  Gary Dismukes  <dismukes@adacore.com>

	* sem_util.adb (Is_Dependent_Component_Of_Mutable_Object): Test
	for case of selecting from an unexpanded implicit dereference
	and do not make a recursive call on such a prefix.

2013-04-25  Doug Rupp  <rupp@adacore.com>

	* targparm.adb (VXF{_Str}): New tag for vaxfloat.
	(Get_Target_Parameters): Handle VXF tag.
	* targparm.ads (VAX_Float_On_Target): New boolean.
	* system-vms-ia64.ads (VAX_Float): New boolean.
	* frontend.adb (Frontend): Handle VAX float boolean.

2013-04-25  Hristian Kirtchev  <kirtchev@adacore.com>

	* einfo.ads, einfo.adb: Remove with and use clauses for Namet.
	(Find_Pragma): New routine.
	* sem_util.ads, sem_util.adb (Find_Pragma): Moved to einfo.

2013-04-25  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch13.adb (Add_Call): Do not capture the nature of the inherited
	predicate.
	(Add_Predicates): Save the static predicate for diagnostics and error
	reporting purposes.
	(Process_PPCs): Remove local variables Dynamic_Predicate_Present and
	Static_Predicate_Present. Add local variable Static_Pred. Ensure that
	the expression of a static predicate is static.

2013-04-25  Hristian Kirtchev  <kirtchev@adacore.com>

	* einfo.adb (Is_Ghost_Subprogram): Remove useless code.

2013-04-25  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Minor addition of index entry.

2013-04-25  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch6.adb (Check_Access_Invariants): Test whether an
	invariant procedure is empty before generating a call to it.
	(Has_Enabled_Predicate): New routine.
	(Has_Null_Body): New routine.
	(Process_PPCs): Test whether an invariant procedure is
	empty before generating a call to it. Test whether predicates are
	enabled for a particular type before generating a predicate call.
	* sem_util.ads, sem_util.adb (Find_Pragma): New routine.

2013-04-25  Robert Dewar  <dewar@adacore.com>

	* sem_ch7.adb, einfo.adb, repinfo.adb, snames.adb-tmpl,
	snames.ads-tmpl: Minor reformatting.

2013-04-25  Thomas Quinot  <quinot@adacore.com>

	* sem_ch7.adb: Minor reformatting.

2013-04-25  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Minor fix to Loop_Variant doc (Loop_Entry allowed).
	* s-tarest.adb: Minor reformatting.

2013-04-25  Hristian Kirtchev  <kirtchev@adacore.com>

	* aspects.ads, aspects.adb: Remove aspect Ghost from all relevant
	tables.
	* einfo.adb: Remove with and use clause for Aspects.
	(Is_Ghost_Function): Removed.
	(Is_Ghost_Entity): New routine.
	(Is_Ghost_Subprogram): New routine.
	* einfo.ads: Remove synthesized attribute Is_Ghost_Function
	along with its uses in entities.  Add synthesized attributes
	Is_Ghost_Entity and Is_Ghost_Subprogram along with uses in related
	entities.
	(Is_Ghost_Function): Removed.
	(Is_Ghost_Entity): New routine.
	(Is_Ghost_Subprogram): New routine.
	* par-prag.adb: Remove pragma Ghost from the processing machinery.
	* repinfo.adb (List_Mechanisms): Add a value for convention Ghost.
	* sem_attr.adb (Analyze_Access_Attribute): Update the check
	for ghost subprograms.
	* sem_ch4.adb (Analyze_Call): Update the check for calls
	to ghost subprograms.
	(Check_Ghost_Function_Call): Removed.
	(Check_Ghost_Subprogram_Call): New routine.
	* sem_ch6.adb (Check_Convention): Rewritten.
	(Check_Overriding_Indicator): Remove the check for overriding
	ghost functions.
	(Convention_Of): New routine.
	* sem_ch12.adb (Preanalyze_Actuals): Update the check for ghost
	generic actual subprograms.
	* sem_mech.adb (Set_Mechanisms): Add an entry for convention Ghost.
	* sem_prag.adb: Remove the value for pragma Ghost from
	table Sig_Flags.
	(Analyze_Pragma): Remove the processing for pragma Ghost.
	(Process_Convention): Emit an error when a ghost
	subprogram attempts to override.
	(Set_Convention_From_Pragma): Emit an error when a ghost subprogram
	attempts to override.
	* sinfo.ads: Clarify the usage of field Label_Construct.
	* snames.adb-tmpl (Get_Convention_Id): Add an entry for
	predefined name Ghost.
	(Get_Convention_Name): Add an entry for convention Ghost.
	* snames.ads-tmpl: Move predefined name Ghost to the sublist
	denoting conventions. Add convention id Ghost. Remove pragma
	id Ghost.

2013-04-25  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch7.adb (Swap_Private_Dependents): Do no recurse on child
	units if within a generic hierarchy.

2013-04-24  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch6.adb (Expand_Actuals): Add a predicate check on an
	actual the related type has a predicate function.
	* sem_ch3.adb (Constant_Redeclaration): Ensure that the related
	type has an invariant procedure before building a call to it.
	* sem_ch6.adb (Append_Enabled_Item): New routine.
	(Check_Access_Invariants): Use routine
	Append_Enabled_Item to chain onto the list of postconditions.
	(Contains_Enabled_Pragmas): Removed.
	(Expand_Contract_Cases): Use routine Append_Enabled_Item to chain onto
	the list of postconditions.
	(Invariants_Or_Predicates_Present): Removed.
	(Process_PPCs): Partially reimplemented.

2013-04-24  Sergey Rybin  <rybin@adacore.com frybin>

	* tree_io.ads: Update ASIS_Version_Number because of changes
	in the way how entities are chained in a scope by means of
	Next_Entity link.

2013-04-24  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch13.adb (Expand_N_Attribute_Definition_Clause, case
	Storage_Size): If the clause is not from an aspect, insert
	assignment to size variable of task type at the point of the
	clause, not after the task definition, to prevent access before
	elaboration in the back-end.

2013-04-24  Yannick Moy  <moy@adacore.com>

	* sem_prag.adb (Sig_Flags): Set correct value for Pragma_Assume.

2013-04-24  Yannick Moy  <moy@adacore.com>

	* gnat_rm.texi: Document 'Loop_Entry.

2013-04-24  Jose Ruiz  <ruiz@adacore.com>

	* s-tassta.adb, s-tarest.adb (Task_Wrapper): Start looking for
	fall-back termination handlers from the parents, because they apply
	only to dependent tasks.
	* s-solita.adb (Task_Termination_Handler_T): Do not look for fall-back
	termination handlers because the environment task has no parent,
	and if it defines one of these handlers it does not apply to
	itself because they apply only to dependent tasks.

2013-04-24  Robert Dewar  <dewar@adacore.com>

	* sem_type.adb, exp_attr.adb, exp_ch4.adb: Minor reformatting.

2013-04-24  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Document 'Update attribute.
	* sem_attr.adb (Analyze_Attribute, case Update): Remove call
	to S14_Attribute (S14_Attribute): removed.

2013-04-24  Robert Dewar  <dewar@adacore.com>

	* interfac.ads: Add size clauses for IEEE_Float_32/64

2013-04-24  Claire Dross  <dross@adacore.com>

	* gnat1drv.adb (Adjust_Global_Switches): Remove
	special assignment of Use_Expression_With_Actions for SPARK_Mode.

2013-04-24  Hristian Kirtchev  <kirtchev@adacore.com>

	* checks.adb (Apply_Predicate_Check): Check for the presence
	of the dynamic predicate aspect when trying to determine if the
	predicate of a type is non-static.
	* sem_ch5.adb (Analyze_Loop_Parameter_Specification): Check
	for the presence of the dynamic predicate aspect when trying to
	determine if the predicate of a type is non- static.
	* sem_ch13.adb (Add_Call): Capture the nature of the
	inherited ancestor predicate.
	(Build_Predicate_Functions): Update comments. Rewrite the checks on
	static predicate application. Complain about the form of a non-static
	expression only when the type is static.

2013-04-24  Ed Schonberg  <schonberg@adacore.com>

	* sem_prag.adb: Add guard to tree traversal.

2013-04-24  Vincent Celier  <celier@adacore.com>

	* clean.adb (Clean): Remove local variable Root_Environment,
	use Makeutl.Root_Environment instead.
	* gnatcmd.adb: Remove local variable Root_Environment, use
	Makeutl.Root_Environment instead.
	* make.adb (Gnatmake): Remove local variable Root_Environment,
	use Makeutl.Root_Environment instead.
	* prj-makr.adb: Remove local variable Root_Environment, use
	Makeutl.Root_Environment instead.

2013-04-24  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_attr.adb (Expand_Loop_Entry_Attribute): Clarify the
	extraction of the declarative part of the conditional block. Move
	the processing of simple infinite loops to the start of the
	expansion logic. Correct the check which determines whether the
	proper scope is installed in visibility.
	* sem_attr.adb (Analyze_Attribute): Add local variable Attr
	to keep track of the attribute in case the enclosing indexed
	component has to be rewritten. When searching for the enclosing
	loop, start from the proper attribute reference in case of a
	rewriting. Do not allow for 'Loop_Entry to appear in pragma
	Assert. Replace loop variable J with Index. Set the type of the
	proper attribute.
	* sem_ch5.adb (Check_Unreachable_Code): Detect a specialized
	block that services a loop statement subject to at least one
	'Loop_Entry attribute.

2013-04-24  Ed Schonberg  <schonberg@adacore.com>

	* sem_type.adb (Disambiguate): In Ada 2012 mode, when trying to
	resolve a fixed point operation, use first subtype to determine
	whether type and operator are declared in the same list of
	declarations.

2013-04-24  Hristian Kirtchev  <kirtchev@adacore.com>

	* par-ch6.adb (P_Subprogram): Detect an illegal
	placement of the aspect specification list in the context of
	expression functions.

2013-04-24  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch4.adb (Expand_N_Allocator):  If the designated object
	has tasks, and the pointer type is an itype that has no master
	id, create a master renaming in the current context, which can
	only be an init_proc.

2013-04-24  Robert Dewar  <dewar@adacore.com>

	* sem_ch3.adb, sem_ch7.adb: Minor reformatting.
	* gnat_rm.texi: Document pragma Loop_Invariant.
	* sem_attr.adb (Analyze_Attribute, case Loop_Entry): This is
	no longer an S14_Attribute.
	* sem_prag.adb (Analyze_Pragma, case Loop_Invariant): Combine
	processing with Assert, allow message parameter, remove call
	to S14_Pragma.

2013-04-24  Thomas Quinot  <quinot@adacore.com>

	* exp_ch4.adb: Minor reformatting.

2013-04-24  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch7.adb (Swap_Private_Dependents): New internal routine
	to Install_Private_Declarations, to make the installation of
	private dependents recursive in the presence of child units.
	* sem_ch3.adb (Build_Discriminated_Subtype): Initialize properly
	the Private_Dependents of a private subtype.

2013-04-24  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_attr.adb (Expand_Loop_Entry_Attribute): Update the
	retrieval of the block declarations.
	* par-ch4.adb (P_Name): Let the name parsing machinery create
	a sequence of nested indexed components for attribute Loop_Entry.
	* sem_attr.adb (Analyze_Attribute): Add local constant
	Context. Reimplement part of the analysis of attribute Loop_Entry.
	(Convert_To_Indexed_Component): Removed.
	* sem_ch4.adb (Analyze_Indexed_Component_Form): Do not analyze
	an indexed component after it has been rewritten into attribute
	Loop_Entry.

2013-04-24  Yannick Moy  <moy@adacore.com>

	* snames.ads-tmpl: Minor change to list
	Loop_(In)variant not in configuration pragma.
	* sem_ch3.adb (Analyze_Declarations): Do not look at the original node
	for analyzing the expressions in pre/postconditions.

2013-04-24  Robert Dewar  <dewar@adacore.com>

	* gnatcmd.adb, xref_lib.adb, gnatls.adb, sem_ch13.adb: Minor
	reformatting.

2013-04-24  Yannick Moy  <moy@adacore.com>

	* sem_ch6.adb (Analyze_Generic_Subprogram_Body,
	Analyze_Subprogram_Body_Helper): Reset contract node to Empty
	before setting entity to E_Subprogram_Body.
	* sem_ch8.adb (Analyze_Subprogram_Renaming): Reset contract node to
	Empty before setting entity to E_Subprogram_Body.

2013-04-24  Vincent Celier  <celier@adacore.com>

	* gnat_ugn.texi: Document new gnatls switch -aPdir.
	* gnatcmd.adb: Pass switch -aP<dir> to gnatls.
	* gnatls.adb (Scan_Ls_Arg): Process new switch -aP<dir>. Issue
	a warning for unknown switches.
	(Usage): Add line for new switch -aPdir.

2013-04-24  Ed Schonberg  <schonberg@adacore.com>

	* sem_util.adb, sem_util.ads (Is_Limited_Class_Wide_Type): Return true
	if the type comes from a limited view, so that task attributes can be
	constructed.

2013-04-24  Yannick Moy  <moy@adacore.com>

	* checks.adb (Apply_Float_Conversion_Check): Do not apply checks if
	full expansion is not enabled.

2013-04-24  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch6.adb (Create_Extra_Formals): In Ada 2012, create extra
	formals if the type does not yet have a completion, and thus
	has no underlying view.

2013-04-24  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch13.adb (Analyze_Aspect_Specifications): Treat an aspect
	specification for Address as a reference, to suppress warnings
	on entities that may be read by an external device.

2013-04-24  Sergey Rybin  <rybin@adacore.com frybin>

	* gnat_ugn.texi: Add description of '--help' and '--version'
	options for ASIS tools: gnatelim, gnatmetric, gnatstub, gnatpp.

2013-04-24  Arnaud Charlet  <charlet@adacore.com>

	* gnat_rm.texi: Minor syntax fix.

2013-04-24  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_attr.adb (Expand_Loop_Entry_Attribute): Add extra comments on
	what and why is being analyzed. Remove the decoration of renamings as
	this simply falls out of the general analysis mechanism.

2013-04-24  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_res.adb (Explain_Redundancy): New routine.
	(Resolve_Equality_Op): Place the error concerning a redundant
	comparison to True at the "=". Try to explain the nature of the
	redundant True.

2013-04-24  Javier Miranda  <miranda@adacore.com>


	* checks.adb, exp_ch6.adb (Install_Null_Excluding_Check): No
	check in interface thunks since it is performed at the caller
	side.
	(Expand_Simple_Function_Return): No accessibility check
	needed in thunks since the check is done by the target routine.

2013-04-24  Vincent Celier  <celier@adacore.com>

	* xref_lib.adb (Add_Entity): Use the canonical file names
	so that source file names with capital letters are found on
	platforms where file names are case insensitive.

2013-04-24  Hristian Kirtchev  <kirtchev@adacore.com>

	* par-ch4.adb (P_Name): Continue to parse the name extension when the
	construct is attribute Loop_Entry. Do not convert the attribute
	reference into an indexed component when there is at least one
	expression / range following 'Loop_Entry.

2013-04-24  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch6.adb (Contains_Enabled_Pragmas): New routine.
	(Process_PPCs): Generate procedure _Postconditions
	only when the context has invariants or predicates or enabled
	aspects/pragmas.

2013-04-24  Thomas Quinot  <quinot@adacore.com>

	* g-socket.adb (Host_Entry): Introduce intermediate copy of
	memory location pointed to by Hostent_H_Addr, as it might not
	have sufficient alignment.

2013-04-24  Yannick Moy  <moy@adacore.com>

	* repinfo.adb (List_Rep_Info): Set the value of Unit_Casing before
	calling subprograms which may read it.

2013-04-24  Hristian Kirtchev  <kirtchev@adacore.com>

	* einfo.adb: Remove Loop_Entry_Attributes from the usage of
	nodes. Flag 260 is now used.
	(Has_Loop_Entry_Attributes): New routine.
	(Loop_Entry_Attributes): Removed.
	(Set_Has_Loop_Entry_Attributes): New routine.
	(Set_Loop_Entry_Attributes): Removed.
	(Write_Entity_Flags): Write out Flag 260.
	(Write_Field10_Name): Remove the output for Loop_Entry_Attributes.
	* einfo.ads: Remove attribute Loop_Entry_Attributes,
	its related comment and uses in nodes.	Add new attribute
	Has_Loop_Entry_Attributes, related comment and uses in loop nodes.
	(Has_Loop_Entry_Attributes): New routine and pragma Inline.
	(Loop_Entry_Attributes): Removed along with pragma Inline.
	(Set_Has_Loop_Entry_Attributes): New routine and pragma Inline.
	(Set_Loop_Entry_Attributes): Removed along with pragma Inline.
	* exp_attr.adb (Expand_Loop_Entry_Attribute): New routine.
	(Expand_N_Attribute_Reference): Expand attribute 'Loop_Entry.
	* exp_ch5.adb: Remove with and use clause for Elists.
	(Expand_Loop_Entry_Attributes): Removed.
	(Expand_N_Loop_Statement): Add local variable Stmt. Rename local
	constant Isc to Scheme. When a loop is subject to attribute
	'Loop_Entry, retrieve the nested loop from the conditional
	block. Move the processing of controlled object at the end of
	loop expansion.
	* sem_attr.adb (Analyze_Attribute): Do not chain attribute
	'Loop_Entry to its related loop.
	* sem_ch5.adb (Analyze_Loop_Statement): Add local variable
	Stmt. When the iteration scheme mentions attribute 'Loop_Entry,
	the entire loop is rewritten into a block.  Retrieve the nested
	loop in such cases to complete the analysis.
	* sem_util.ads, sem_util.adb (Find_Loop_In_Conditional_Block): New
	routine.
	(Subject_To_Loop_Entry_Attributes): New routine.

2013-04-24  Robert Dewar  <dewar@adacore.com>

	* exp_prag.adb (Expand_Loop_Variant): Generate pragma Check
	(Loop_Variant, xxx) rather than Assert (xxx).
	* gnat_rm.texi: Document pragma Loop_Variant.
	* sem_prag.adb (Analyze_Pragma, case Loop_Variant): Remove call
	to S14_Pragma.

2013-04-24  Yannick Moy  <moy@adacore.com>

	* adabkend.adb, ali-util.adb, ali.adb, debug.adb,
	errout.adb, errout.ads, erroutc.adb, exp_ch3.adb, exp_ch4.adb,
	exp_ch6.adb, exp_ch7.adb, exp_dbug.adb, exp_util.adb,
	expander.adb, freeze.adb, gnat1drv.adb, lib-writ.adb,
	lib-writ.ads, lib-xref.adb, lib-xref.ads, opt.adb, opt.ads,
	restrict.adb, sem_aggr.adb, sem_attr.adb, sem_ch3.adb,
	sem_ch4.adb, sem_ch5.adb, sem_ch6.adb, sem_eval.adb, sem_prag.adb,
	sem_res.adb, sem_util.adb: Everything with name
	'Alfa' renamed in 'SPARK'. Update comments.
	Renaming of units with name 'Alfa', renamed with 'SPARK' instead.
	* exp_alfa.adb: renamed exp_spark.adb.
	* exp_alfa.ads: renamed exp_spark.ads.
	* get_alfa.adb: renamed get_spark_xrefs.adb.
	* get_alfa.ads: renamed get_spark_xrefs.ads.
	* lib-xref-alfa.adb: renamed lib-xref-spark_specific.adb.
	* put_alfa.adb: renamed put_spark_xrefs.adb.
	* put_alfa.ads: renamed put_spark_xrefs.ads.
	* alfa.adb: renamed spark_xrefs.adb.
	* alfa.ads: renamed spark_xrefs.ads.
	* alfa_test.adb: renamed spark_xrefs_test.adb.
	* gcc-interface/Make-lang.in: Update dependencies.

2013-04-24  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Document pragma Assume.
	* sem_prag.adb (Analyze_Pragma, case Assume): Now processed as
	part of Assert, and no longer requires -gnatd.F

2013-04-24  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Document pragma Assert_And_Cut.
	* sem_prag.adb (Analyze_Pragma, case Assert_And_Cut): Remove
	S14_Pragma call.

2013-04-24  Ed Schonberg  <schonberg@adacore.com>

	* sem_aux.adb: Add guard in Available_View.

2013-04-24  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Analyze_Depends_In_Decl_Part): Use
	Find_Related_Subprogram to find the associated subprogram.
	(Analyze_Global_In_Decl_List): Use Find_Related_Subprogram
	to find the associated subprogram.
	(Analyze_Pragma): Use Find_Related_Subprogram to find the associated
	subprogram.

2013-04-24  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch6.adb: Remove with and use clause for Sem_Prag.
	(Freeze_Subprogram): Call Analyze_Subprogram_Contract to analyze
	the contract of a subprogram.
	* sem_ch3.adb: Remove with and use clause for Sem_Prag.
	(Analyze_Declarations): Call Analyze_Subprogram_Contract to
	analyze the contract of a subprogram.
	* sem_ch6.adb (Analyze_Subprogram_Contract): New routine.
	(Check_Subprogram_Contract): Removed.
	* sem_ch6.ads (Analyze_Subprogram_Contract): New routine.
	(Check_Subprogram_Contract): Removed.
	(Expand_Contract_Cases): Add a guard against malformed contract cases.
	* sem_ch13.adb (Analyze_Aspect_Specifications): Call
	Decorate_Delayed_Aspect_And_Pragma to decorate aspects
	Contract_Cases, Depends and Global. Reimplement the analysis of
	aspect Contract_Cases.
	(Decorate_Delayed_Aspect_And_Pragma): New routine.
	* sem_prag.adb (Analyze_Contract_Cases_In_Decl_Part): New routine.
	(Analyze_CTC_In_Decl_Part): Removed.
	(Analyze_Pragma): Reimplement the analysis of pragma Contract_Cases.
	(Analyze_Test_Case_In_Decl_Part): New routine.
	(Find_Related_Subprogram): New routine.
	(Requires_Profile_Installation): Add new formal Prag. Update
	the logic to take into account the origin of the pragma.
	* sem_prag.ads (Analyze_Contract_Cases_In_Decl_Part): New routine.
	(Analyze_CTC_In_Decl_Part): Removed.
	(Analyze_Test_Case_In_Decl_Part): New routine.

2013-04-24  Robert Dewar  <dewar@adacore.com>

	* sem_prag.adb (Process_Convention): Move Stdcall tests to
	Set_Convention_From_Pragma so that they are applied to each
	entry of a homonym set.
	(Process_Convention): Don't try to set convention if already set.

2013-04-24  Robert Dewar  <dewar@adacore.com>

	* gnatbind.adb: Minor reformatting.

2013-04-24  Vincent Celier  <celier@adacore.com>

	* clean.adb (Gnatclean): Add the default project search
	directories in the project search path after scanning the
	switches on the command line.
	(Initialize): Do not put the default project search directories in the
	project search path.
	* gnatcmd.adb (GNATcmd): Add the default project search
	directories in the project search path after scanning the switches
	on the command line.
	* make.adb (Initialize): Add the default project search
	directories in the project search path after scanning the switches
	on the command line.

2013-04-24  Yannick Moy  <moy@adacore.com>

	* restrict.ads (Restriction_Warnings): Initialize with all False value.

2013-04-24  Robert Dewar  <dewar@adacore.com>

	* checks.ads, checks.adb (Predicate_Checks_Suppressed): New function.
	* exp_util.ads, exp_util.adb (Make_Predicate_Check): Check setting of
	Predicate_Check.
	* snames.ads-tmpl (Name_Predicate_Check): New check name.
	* types.ads (Predicate_Check): New definition.
	* gnat_rm.texi: Add documentation for Predicate_Check.

2013-04-24  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch8.adb (Expand_N_Subprogram_Renaming_Declaration): If this
	is a renaming of predefined equality for an untagged record,
	add generated body to the freeze actions for the subprogram, to
	prevent freezing issues when the record has incomplete components.
	* exp_ch4.adb (Expand_Composite_Equality): If the type is a type
	without completion, return a predefined comparison instead of
	just False.  This may happen when building the expression for
	record equality, when some component has a type whose completion
	has not been seen yet. The operation will be analyzed an expanded
	after the type has been frozen, at which point all component
	types will have been completed, or an error reported.

2013-04-24  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch13.adb (Analyze_Aspect_Specifications): Do not delay
	analysis of a Convention aspect.

2013-04-24  Eric Botcazou  <ebotcazou@adacore.com>

	* fe.h (Machine_Overflows_On_Target): New macro and declaration.
	(Signed_Zeros_On_Target): Likewise.

2013-04-24  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch6.adb: Add with and use clause for Sem_Prag.
	(Freeze_Subprogram): Analyze all delayed aspects for a null
	procedure so that they are available when analyzing the
	internally-generated _Postconditions routine.
	* exp_ch13.adb: Remove with and use clause for Sem_Prag.
	(Expand_N_Freeze_Entity): Move the code that analyzes delayed
	aspects of null procedures to exp_ch6.Freeze_Subprogram.
	* sem_prag.adb (Analyze_Abstract_State): Update the check on
	volatile requirements.

2013-04-24  Bob Duff  <duff@adacore.com>

	* ali-util.ads (Source_Record): New component Stamp_File
	to record from whence the Stamp came.
	* ali-util.adb (Set_Source_Table): Set Stamp_File component.
	* bcheck.adb (Check_Consistency): Print additional information in
	Verbose_Mode.
	* gnatbind.adb (Gnatbind): Print additional information in
	Verbose_Mode.

2013-04-24  Robert Dewar  <dewar@adacore.com>

	* exp_ch13.adb, sem_prag.adb: Update comments.
	* sem_ch3.adb, exp_ch9.adb, g-socket.adb, sem_ch13.adb: Minor
	reformatting.

2013-04-24  Doug Rupp  <rupp@adacore.com>

	* vms_data.ads (/{NO}INHIBIT-EXEC): Document new default behavior.

2013-04-24  Yannick Moy  <moy@adacore.com>

	* sinfo.ads: Minor correction of typo.

2013-04-24  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch3.adb: Create packed array only when expander is
	active.

2013-04-24  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Analyze_Depends_In_Decl_Part): Install the formals only
	when the context warrants it.
	(Analyze_Global_In_Decl_List): Install the formals only when
	the context warrants it.
	(Requires_Profile_Installation): New routine.

2013-04-24  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch6.adb (Expand_N_Simple_Return_Statement): When the return
	type is a discriminated private type that does not require use
	of the secondary stack, a constrained subtype of the underlying
	type is created to convey the proper object size to the backend.
	If the return type is originally a private type, the return
	expression is wrapped in an unchecked_conversion. If the return
	expression is used subsequently in a call to the postcondition
	function, this conversion must be undone to prevent a spurious
	error on the analysis of that call.

2013-04-23  Kai Tietz  <ktietz@redhat.com>

	PR target/55445
	* raise-gcc.c (__SEH__): Additional check that SjLj isn't active.

2013-04-23  Eric Botcazou  <ebotcazou@adacore.com>
	    Pascal Obry    <obry@adacore.com>

	* gcc-interface/Makefile.in (targ): Fix target name check.
	(../../gnatmake$(exeext)): Add '+' for LTO.
	(../../gnatlink$(exeext)): Likewise.

2013-04-23  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch9.adb (Build_PPC_Wrapper): Correct the traversal of
	pre- and post-conditions.
	(Expand_N_Task_Type_Declaration):
	Use the correct attribute to check for pre- and post-conditions.
	* exp_ch13.adb (Expand_N_Freeze_Entity): Correct the traversal of
	pre- and post-conditions.  Analyze delayed classification items.
	* freeze.adb (Freeze_Entity): Use the correct attribute to
	check for pre- and post- conditions.
	* sem_ch3.adb (Analyze_Declarations): Correct the traversal
	of pre- and post-conditions as well as contract- and
	test-cases. Analyze delayed pragmas Depends and Global.
	* sem_ch6.adb (Check_Subprogram_Contract): Use the correct
	attribute to check for pre- and post-conditions, as well as
	contract-cases and test-cases.	(List_Inherited_Pre_Post_Aspects):
	Correct the traversal of pre- and post- conditions.
	(Process_Contract_Cases): Update the comment on usage. Correct
	the traversal of contract-cases.
	(Process_Post_Conditions): Update the comment on usage. Correct the
	traversal of pre- and post-conditions.
	(Process_PPCs): Correct the traversal of pre- and post-conditions.
	(Spec_Postconditions): Use the correct
	attribute to check for pre- and post- conditions, as well as
	contract-cases and test-cases.
	* sem_ch13.adb (Analyze_Aspect_Specifications): Reimplement the
	actions related to aspects Depends and Global. Code refactoring
	for pre- and post-conditions.
	(Insert_Delayed_Pragma): New routine.
	* sem_prag.adb (Add_Item): New routine.
	(Analyze_Depends_In_Decl_Part): New routine.
	(Analyze_Global_In_Decl_Part): New routine.
	(Analyze_Pragma): Reimplement the actions related to aspects Depends and
	Global. Verify that a body acts as a spec for pragma Contract_Cases.
	(Chain_PPC): Use Add_Contract_Item to chain a pragma.
	(Chain_CTC): Correct the traversal of contract-
	and test-cases. Use Add_Contract_Item to chain a pragma.
	(Chain_Contract_Cases): Correct the traversal of contract-
	and test-cases. Use Add_Contract_Item to chain a pragma.
	(Check_Precondition_Postcondition): Update the comment on usage.
	(Check_Test_Case): Update the comment on usage.
	* sem_prag.ads (Analyze_Depends_In_Decl_Part): New routine.
	(Analyze_Global_In_Decl_Part): New routine.
	* sem_util.ads, sem_util.adb (Add_Contract_Item): New routine.
	* sinfo.adb (Classifications): New routine.
	(Contract_Test_Cases): New routine.
	(Pre_Post_Conditions): New routine.
	(Set_Classifications): New routine.
	(Set_Contract_Test_Cases): New routine.
	(Set_Pre_Post_Conditions): New routine.
	(Set_Spec_CTC_List): Removed.
	(Set_Spec_PPC_List): Removed.
	(Spec_CTC_List): Removed.
	(Spec_PPC_List): Removed.
	* sinfo.ads: Update the structure of N_Contruct along with all
	related comments.
	(Classifications): New routine and pragma Inline.
	(Contract_Test_Cases): New routine and pragma Inline.
	(Pre_Post_Conditions): New routine and pragma Inline.
	(Set_Classifications): New routine and pragma Inline.
	(Set_Contract_Test_Cases): New routine and pragma Inline.
	(Set_Pre_Post_Conditions): New routine and pragma Inline.
	(Set_Spec_CTC_List): Removed.
	(Set_Spec_PPC_List): Removed.
	(Spec_CTC_List): Removed.
	(Spec_PPC_List): Removed.

2013-04-23  Doug Rupp  <rupp@adacore.com>

	* init.c (GNAT$STOP) [VMS]: Bump sigargs[0] count by 2
	to account for LIB$STOP not having the chance to add the PC and
	PSL fields.

2013-04-23  Robert Dewar  <dewar@adacore.com>

	* sem_ch13.adb: Minor code reorganization (remove some redundant
	assignments).
	* sem_ch3.adb, sem_prag.adb: Minor reformatting.

2013-04-23  Yannick Moy  <moy@adacore.com>

	* einfo.ads: Minor typo fix.
	* sem_ch13.adb (Build_Predicate_Functions): Reject cases where
	Static_Predicate is applied to a non-scalar or non-static type.
	* sem_prag.adb: Minor typo fix.

2013-04-23  Doug Rupp  <rupp@adacore.com>

	* init.c (GNAT$STOP) [VMS]: New function.

2013-04-23  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch3.adb: Add exp_pakd to context.
	(Constrain_Component_Type): If the component of the parent is
	packed, and the record subtype being built is already frozen,
	as is the case for an itype, the component type itself will not
	be frozen, and the packed array type for it must be constructed
	explicitly.

2013-04-23  Thomas Quinot  <quinot@adacore.com>

	* g-socket.adb, g-socket.ads (Set_Close_On_Exec): New subprogram.

2013-04-23  Yannick Moy  <moy@adacore.com>

	* err_vars.ads (Error_Msg_Qual_Level): Set variable to zero
	at declaration.
	* opt.ads (Multiple_Unit_Index): Set variable to zero at declaration.
	* sem_util.adb (NCT_Table_Entries): Set variable to zero at declaration.
	* set_targ.ads (Num_FPT_Modes): Set variable to zero at declaration.
	* stylesw.adb (Save_Style_Check_Options): Protect testing the
	value of Style_Check_Comments_Spacing by a previous test that
	Style_Check_Comments is True.

2013-04-23  Thomas Quinot  <quinot@adacore.com>

	* sem_prag.adb, sem_prag.ads (Effective_Name): Rename to
	Original_Name, and move declaration to package body as this
	subprogram is not used from outside. Also clarify documentation.

2013-04-23  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch6.adb (Expand_N_Subprogram_Body): When compiling with
	initialize_scalars, disable predicate checks on the generated
	assignment to an out scalar parameter.

2013-04-23  Gary Dismukes  <dismukes@adacore.com>

	* sem_ch4.adb (Analyze_Allocator): Remove error
	check for "constrained in partial view" constraints entirely.

2013-04-23  Robert Dewar  <dewar@adacore.com>

	* einfo.ads, sem_prag.ads: Minor reformatting.
	* errout.ads: Comment update.

2013-04-23  Yannick Moy  <moy@adacore.com>

	* exp_ch5.adb: Minor typo.

2013-04-23  Thomas Quinot  <quinot@adacore.com>

	* gnat_ugn.texi: Fix typo.

2013-04-23  Ed Schonberg  <schonberg@adacore.com>

	* einfo.ads: Minor documentation clarification.

2013-04-23  Bob Duff  <duff@adacore.com>

	* types.ads: Fix incorrect comment.

2013-04-23  Ed Schonberg  <schonberg@adacore.com>

	* sem_aux.adb sem_aux.ads (Effectively_has_Constrained_Partial_View):
	Rename subprogram as Object_Type_Has_Constrained_Partial_View, better
	description of purpose.
	* checks.adb (Apply_Discriminant_Check): Use above renaming.
	* sem_ch4.adb (Analyze_Allocator): Check Has_Constrained_Partial_View
	of the base type, rather than using the Object_Type predicate.
	* sem_attr.adb (Analyze_Attribute, case 'Access): Use above renaming.
	* sem_util.adb (Is_Dependent_Component_Of_Mutable_Object): ditto.
	* exp_attr.adb (Expand_N_Attribute_Reference, case 'Constrained): Ditto.
	* exp_ch4.adb (Expand_N_Allocator): Ditto.

2013-04-23  Robert Dewar  <dewar@adacore.com>

	* exp_prag.adb (Expand_Pragma_Check): Check for Assert rather
	than Assertion.
	* sem_prag.adb (Is_Valid_Assertion_Kind): Moved to spec
	(Effective_Name): New function (Analyze_Pragma, case Check):
	Disallow [Statement_]Assertions (Check_Kind): Implement
	Statement_Assertions (Check_Applicable_Policy): Use Effective_Name
	(Is_Valid_Assertion_Kind): Allow Statement_Assertions.
	* sem_prag.ads (Is_Valid_Assertion_Kind): Moved here from body
	(Effective_Name): New function.
	* sem_res.adb: Minor reformatting.
	* snames.ads-tmpl (Name_Statement_Assertions): New entry.
	* gnat_rm.texi: Add documentation of new assertion kind
	Statement_Assertions.

2013-04-23  Robert Dewar  <dewar@adacore.com>

	* sinfo.ads, einfo.adb, sem_res.adb, exp_ch6.adb, aspects.adb: Minor
	reformatting and code clean up.

2013-04-23  Vincent Celier  <celier@adacore.com>

	* prj-part.ads, prj-conf.ads: Minor comment updates.

2013-04-23  Ed Schonberg  <schonberg@adacore.com>

	* einfo.adb (Predicate_Function): For a private type, retrieve
	predicate function from full view.
	* aspects.adb (Find_Aspect): Ditto.
	* exp_ch6.adb (Expand_Actuals): If the formal is class-wide and
	the actual is a definite type, apply predicate check after call.
	* sem_res.adb: Do not apply a predicate check before the call to
	a generated Init_Proc.

2013-04-23  Robert Dewar  <dewar@adacore.com>

	* sem_ch13.adb (Analyze_Aspect_Specifications): Significant
	rewrite to make sure Is_Ignore is properly captured when aspect
	is declared.
	* sem_ch6.adb: Minor reformatting.
	* sem_prag.adb (Analyze_Pragma): Do not test policy at time of
	pragma for the case of a pragma coming from an aspect (already
	tested when we analyzed the aspect).

2013-04-23  Vincent Celier  <celier@adacore.com>

	* prj-conf.adb (Parse_Project_And_Apply_Config): New
	Boolean parameter Implicit_Project, defaulted to False. Call
	Prj.Part.Parse with Implicit_Project.
	* prj-conf.ads (Parse_Project_And_Apply_Config): New Boolean
	parameter Implicit_Project, defaulted to False.
	* prj-part.adb (Parse_Single_Project): New Boolean parameter
	Implicit_Project, defaulted to False. When Implicit_Project is
	True, change the Directory of the project node to the Current_Dir.
	* prj-part.ads (Parse): New Boolean parameter, defaulted to False

2013-04-23  Robert Dewar  <dewar@adacore.com>

	* exp_util.adb: Minor reformatting.

2013-04-23  Robert Dewar  <dewar@adacore.com>

	* xoscons.adb: Minor reformatting.

2013-04-23  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Check_Mode): Ensure that a
	self-referential output appears in both input and output lists of
	the subprogram as categorized by aspect Global.
	(Check_Usage): Rename formal parameters to better illustrate their
	function. Update all uses of the said formals.

2013-04-23  Thomas Quinot  <quinot@adacore.com>

	* exp_util.adb, exp_util.ads (Fully_Qualified_Name_String): New
	parameter Append_NUL to make NUL-termination optional.
	* exp_dist.adb: Consistently use the above throughout instead of
	Get_Library_Unit_Name_String.

2013-04-23  Robert Dewar  <dewar@adacore.com>

	* sem_util.adb, sem_res.adb, prj-tree.adb, prj-tree.ads: Minor
	reformatting.

2013-04-23  Pascal Obry  <obry@adacore.com>

	* xoscons.adb: Remove unused use clause, minor code clean-up.

2013-04-23  Ed Schonberg  <schonberg@adacore.com>

	* sem_util.ads, sem_util.adb: Code cleanup for Is_Expression_Function
	(can apply to any scope entity).
	* sem_res.adb (Resolve_Call):  If the call is within another
	expression function it does not constitute a freeze point.

2013-04-23  Yannick Moy  <moy@adacore.com>

	* exp_ch6.adb (Expand_Actuals): Test that Subp
	is overloadable before testing if it's an inherited operation.

2013-04-23  Robert Dewar  <dewar@adacore.com>

	* a-envvar.adb, a-envvar.ads, exp_util.adb, sem_ch12.adb: Minor
	reformatting.

2013-04-23  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch3.adb (Analyze_Object_Declarations): Undo previous patch.
	* exp_util.adb (Expand_Subtype_From_Expr): If the expression
	is a source entity and the declaration is for an aliased
	unconstrained array, create a new subtype so that the flag
	Is_Constr_Subt_For_UN_Aliased does not pollute other entities.

2013-04-23  Hristian Kirtchev  <kirtchev@adacore.com>

	* aspects.adb: Move tables Base_Aspect and Inherited_Aspect
	from the spec to the body.
	(Find_Aspect): Update the call to Get_Aspect_Id.
	(Get_Aspect_Id): New version that takes an aspect specification.
	* aspects.ads: Reorganize all aspect related tables.
	(Get_Aspect_Id): New version that takes an aspect specification.
	* par_sco.adb (Traverse_Aspects): Update the call to Get_Aspect_Id.
	* sem_ch12.adb (Analyze_Generic_Subprogram_Declaration): Update
	the call to Get_Aspect_Id.
	* sem_ch13.adb (Analyze_Aspect_At_Freeze_Point): Update the
	call to Get_Aspect_Id.	(Analyze_Aspect_Specifications): Update
	the call to Get_Aspect_Id. Update the call to Impl_Defined_Aspect.

2013-04-23  Robert Dewar  <dewar@adacore.com>

	* sem_prag.adb (Fix_Error): Rewrite to do more accurate job
	of getting proper name in the case where pragma comes from
	aspect.
	* sem_ch3.adb, sinfo.ads, par-ch6.adb, exp_ch6.adb: Minor reformatting.

2013-04-23  Yannick Moy  <moy@adacore.com>

	* sem_ch6.adb (Process_PPCs): Do not filter postconditions based on
	applicable policy.

2013-04-23  Thomas Quinot  <quinot@adacore.com>

	* par_sco.adb (Traverse_Aux_Decls): Minor code reorganization.

2013-04-23  Doug Rupp  <rupp@adacore.com>

	* init.c: Move facility macros outside IN_RTS.

2013-04-23  Thomas Quinot  <quinot@adacore.com>

	* freeze.adb (Freeze_Entity): For the case of a bit-packed
	array time that is known at compile time to have more that
	Integer'Last+1 elements, issue an error, since such arrays are
	not supported.

2013-04-23  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Analyze_Dependency_Clause): Update all calls to
	Analyze_Input_Output.
	(Analyze_Input_List): Update all calls to Analyze_Input_Output.
	(Analyze_Input_Output): Add formal parameter Self_Ref along with
	comment on its usage. Update all calls to Analyze_Input_Output.
	(Analyze_Pragma): Add new local variable Self_Ref to capture
	the presence of a self-referential dependency clause. Update
	all calls to Analyze_Input_Output.
	(Check_Mode): Add formal parameter Self_Ref along with comment on its
	usage. Verify the legality of a self-referential output.

2013-04-23  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch6.adb: Add predicate checks on by-copy parameter.

2013-04-23  Vincent Celier  <celier@adacore.com>

	* a-envvar.adb, a-envvar.ads (Value): New.

2013-04-22  Yannick Moy  <moy@adacore.com>

	* exp_prag.adb (Expand_Pragma_Loop_Variant): Rewrite pragma as
	null statement if ignored.
	* sem_ch6.adb (Expand_Contract_Cases): Do nothing if pragma is ignored.
	* sem_prag.adb (Analyze_Pragma): Keep analyzing ignored pragmas.

2013-04-22  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Analyze_Contract_Case): New routine.
	(Analyze_Pragma): Aspect/pragma Contract_Cases can
	now be associated with a library level subprogram.
	Add circuitry to detect illegal uses of aspect/pragma Contract_Cases
	in a subprogram body.
	(Chain_Contract_Cases): Rename formal parameter Subp_Decl to
	Subp_Id. Remove local constant Subp. The entity of the subprogram
	is now obtained via the formal paramter.

2013-04-22  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch3.adb (Analyze_Object_Declaration): Do not set
	Is_Constr_Subt_For_Unc_Aliased on the subtype of the expression,
	if the expression is a source entity.

2013-04-22  Yannick Moy  <moy@adacore.com>

	* exp_prag.adb, sinfo.ads, sem_prag.ads: Minor correction of typos in
	comments.
	* sem_ch6.adb (Expand_Contract_Cases): Add location to message.

2013-04-22  Thomas Quinot  <quinot@adacore.com>

	* sem_prag.adb (Fix_Error): For a pragma rewritten from another
	pragma, fix up error message to include original pragma name.
	* par_sco.adb: Minor reformatting.

2013-04-22  Robert Dewar  <dewar@adacore.com>

	* sem_prag.adb, sem_util.adb, sem_util.ads, sem_res.adb, exp_ch6.adb,
	sem_ch6.adb, opt.ads: Minor reformatting.

2013-04-22  Pascal Obry  <obry@adacore.com>

	* gnat_ugn.texi, prj-nmsc.adb, projects.texi: Add check for
	Library_Standalone and Library_Kind.

2013-04-22  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch6.adb (Expand_Actuals): If the call is to an
	inherited operation and the actual is a by-reference type with
	predicates, add predicate call to post-call actions.
	* sem_util.adb (Is_Inherited_Operation_For_Type): Fix coding
	error: a type declaration has a defining identifier, not an Etype.
	* sem_res.adb: Restore code removed because of above error.

2013-04-22  Doug Rupp  <rupp@adacore.com>

	* init.c (__gnat_handle_vms_condition): Also match C$_SIGINT.

2013-04-22  Yannick Moy  <moy@adacore.com>

	* gnat_rm.texi, exp_util.adb, sem_prag.adb, sem_prag.ads, par-ch2.adb,
	opt.ads, sem_ch13.adb: Minor correction of typos in comments/doc.

2013-04-22  Vincent Celier  <celier@adacore.com>

	* prj-nmsc.adb (Check_Library_Attributes): Set Library_Dir to
	No_Path_Information only when Directories_Must_Exist_In_Projects
	is False.
	(Get_Directories): Set Object_Directory
	or Exec_Directory to No_Path_Information only when
	Directories_Must_Exist_In_Projects is False.

2013-04-22  Yannick Moy  <moy@adacore.com>

	* par-prag.adb, sem_attr.adb, sem_ch6.adb, sem_prag.adb, sem_warn.adb,
	snames.ads-tmpl, sinfo.ads, sem_util.ads: Remove all references to
	Pragma_Contract_Case and Name_Contract_Case.

2013-04-22  Yannick Moy  <moy@adacore.com>

	* aspects.ads, aspects.adb, sem_ch13.adb: Removal of references to
	Contract_Case.
	* gnat_ugn.texi, gnat_rm.texi Description of Contract_Case replaced by
	description of Contract_Cases.

2013-04-12  Robert Dewar  <dewar@adacore.com>

	* makeutl.adb, prj-nmsc.adb: Minor reformatting.

2013-04-12  Robert Dewar  <dewar@adacore.com>

	* exp_util.adb (Make_Invariant_Call): Use Check_Kind instead
	of Check_Enabled.
	* gnat_rm.texi (Check_Policy): Update documentation for new
	Check_Policy syntax.
	* sem_prag.adb (Check_Kind): Replaces Check_Enabled
	(Analyze_Pragma, case Check_Policy): Rework to accomodate new
	syntax (like Assertion_Policy).
	* sem_prag.ads (Check_Kind): Replaces Check_Enabled.

2013-04-12  Doug Rupp  <rupp@adacore.com>

	* init.c (SS$_CONTROLC, SS$_CONTINUE) [VMS]: New macros.
	(__gnat_handle_vms_condition) [VMS]: Dispatch on the Crtl/C user
	handler if installed.
	* ctrl_c.c (__gnat_install_int_handler)
	[VMS]: Install a dummy sigaction handler to trigger the real
	user handler dispatch in init.c/__gnat_handle_vms_condition.
	(__gnat_uninstall_int_handler) [VMS]: Likewise.

2013-04-12  Vincent Celier  <celier@adacore.com>

	* clean.adb (Parse_Cmd_Line): Set Directories_Must_Exist_In_Projects
	to False if switch is specified.
	* makeutl.adb (Initialize_Source_Record): Do not look for the
	object file if there is no object directory.
	* opt.ads (Directories_Must_Exist_In_Projects): New Boolean
	variable, defaulted to True.
	* prj-nmsc.adb (Check_Library_Attributes): Do not fail if library
	directory does not exist when Directories_Must_Exist_In_Projects is
	False.
	(Get_Directories): Do not fail when the object or the exec directory
	do not exist when Directories_Must_Exist_In_Projects is False.

2013-04-12  Robert Dewar  <dewar@adacore.com>

	* namet.adb, namet.ads: Minor addition (7 arg version of Nam_In).
	* exp_prag.adb, sem_ch3.adb, sem_intr.adb, sem_type.adb, exp_util.adb,
	sem_aux.adb, exp_ch9.adb, sem_ch7.adb, sem_ch10.adb, sem_prag.adb,
	par-ch2.adb, tbuild.adb, rtsfind.adb, freeze.adb, sem_util.adb,
	sem_res.adb, sem_attr.adb, exp_ch2.adb, prj-makr.adb, sem_elab.adb,
	exp_ch4.adb, sem_ch4.adb, sem_mech.adb, sem_ch6.adb, par-prag.adb,
	prj-nmsc.adb, exp_disp.adb, sem_ch8.adb, sem_warn.adb, par-util.adb,
	sem_eval.adb, exp_intr.adb, sem_ch13.adb, exp_cg.adb, lib-xref.adb,
	sem_disp.adb, exp_ch3.adb: Minor code reorganization (use Nam_In).

2013-04-12  Doug Rupp  <rupp@adacore.com>

	* init.c: Don't clobber condition code on VMS.

2013-04-12  Robert Dewar  <dewar@adacore.com>

	* exp_aggr.adb: Minor reformatting.
	* namet.ads, namet.adb (Nam_In): New functions.

2013-04-12  Robert Dewar  <dewar@adacore.com>

	* einfo.adb (Has_Dynamic_Predicate_Aspect): New flag.
	(Has_Static_Predicate_Aspect): New flag.
	* einfo.ads (Has_Dynamic_Predicate_Aspect): New flag.
	(Has_Static_Predicate_Aspect): New flag.
	* exp_ch9.adb: Minor reformatting.
	* exp_util.adb (Make_Invariant_Call): Check_Enabled now handles
	synonyms.
	* gnat1drv.adb: Remove setting of Debug_Pragmas_Enabled,
	since this switch is gone and control of Debug is done with
	Assertions_Enabled.
	* gnat_rm.texi: Update documentation for Assertion_Policy and
	Check_Policy pragmas.
	* opt.adb (Debug_Pragmas_Disabled[_Config]): Removed
	(Debug_Pragmas_Enabled[_Config]): Removed Since debug now
	controlled by Assertion_Enabled.
	* opt.ads (Debug_Pragmas_Disabled[_Config]): Removed
	(Debug_Pragmas_Enabled[_Config]): Removed Since debug now
	controlled by Assertion_Enabled.
	* par-ch2.adb (Scan_Pragma_Argument_Association): Allow new
	'Class forms.
	* sem_attr.adb: Minor reformatting.
	* sem_ch13.adb (Analyze_Aspect_Specification): Disable aspect
	if DISABLE policy applies.
	* sem_ch6.adb (Grab_PPC): Check original name of aspect for
	aspect from pragma (Process_PPCs): Properly check assertion policy.
	* sem_prag.adb (Check_Enabled): Rewritten for new Assertion_Policy
	(Check_Appicable_Policy): New procedure.
	(Is_Valid_Assertion_Kind): New function.
	(Rewrite_Assertion_Kind): New procedure.
	(Analyze_Pragma): Handle case of disabled assertion pragma.
	(Analyze_Pragma, case Assertion_Policy): Rewritten for Ada 2012.
	(Analyze_Pragma, case Check): Deal with 'Class possibilities.
	(Analyze_Pragma, case Check_Policy): Deal with 'Class possibilities.
	(Analyze_Pragma, case Contract_Class): New handling of ignored pragma.
	(Analyze_Pragma, case Debug): New control with Assertion_Policy.
	(Analyze_Pragma, case Debug_Policy): Now consistent with
	Assertion_Policy.
	(Analyze_Pragma, case Loop_Invariant): New handling of ignored
	pragma.
	(Analyze_Pragma, case Loop_Variant): New handling of ignored pragma.
	(Analyze_Pragma, case Precondition): Use proper name for Check pragma.
	(Analyze_Pragma, case Check_Enabled): Rewritten for new policy stuff.
	* sem_prag.ads (Check_Enabled): Rewritten for new
	Assertion_Policy stuff.
	(Check_Appicable_Policy): New procedure.
	* sinfo.adb (Is_Disabled): New flag.
	(Is_Ignored): New flag.
	* sinfo.ads (Is_Disabled): New flag.
	(Is_Ignored): New flag.
	(N_Pragma_Argument_Association): New 'Class forms.
	* snames.ads-tmpl: New names Name_uPre, Name_uPost,
	Name_uType_Invariant, Name_uInvariant.
	* switch-c.adb: Remove setting of Debug_Pragmas_Enabled for -gnata.
	* tree_io.ads (ASIS_Version_Number): Updated (remove
	read write of obsolete flags Debug_Pragmas_Disabled and
	Debug_Pragmas_Enabled.

2013-04-12  Ed Schonberg  <schonberg@adacore.com>

	* exp_aggr.adb (Get_Explicit_Discriminant_Value): Subsidiary
	of Build_Record_Aggr_Code, used to retrieve explicit values
	for inherited discriminants in an extension aggregate, when the
	ancestor type is unconstrained.

2013-04-12  Ed Schonberg  <schonberg@adacore.com>

	* sem_attr.adb (Check_Stream_Attribute): If restriction
	No_Default_Stream_Attributes is active, it is illegal to use a
	predefined elementary type stream attribute either by itself,
	or more importantly as part of the attribute subprogram for a
	composite type. However, if the broader restriction No_Streams
	is active, then stream operations are not generated, and there
	is no error.

2013-04-12  Robert Dewar  <dewar@adacore.com>

	* gnatbind.adb: Minor reformatting.

2013-04-12  Bob Duff  <duff@adacore.com>

	* sem_attr.adb (Analyze_Access_Attribute): Treat P'Access like a
	call only in the static elaboration model.

2013-04-12  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Analyze_Input_List): Detect an illegal dependency
	clause where both input and output lists are null.
	(Analyze_Pragma): Update the grammar of pragma Depends.

2013-04-12  Vincent Celier  <celier@adacore.com>

	* gnatbind.adb (No_Restriction_List): Exclude restrictions that
	take a parameter value, not a count.
	* prj.ads, prj.adb (Remove_All_Restricted_Languages): New procedure.
	* projects.texi: Complete documentation of attribute Roots.

2013-04-12  Thomas Quinot  <quinot@adacore.com>

	* exp_ch3.adb, exp_util.ads, checks.adb, freeze.adb, sem_attr.adb,
	sem_ch3.adb: Minor reformatting.
	* exp_ch4.adb (Size_In_Storage_Elements): Minor documentation
	improvement: note that the computation is pessimistic for bit
	packed arrays.
	* gnat_rm.texi (Range_Length): Fix minor error in description
	of attribute.

2013-04-12  Hristian Kirtchev  <kirtchev@adacore.com>

	* aspects.adb (Find_Aspect): New routine.
	(Find_Value_Of_Aspect): New routine.
	(Has_Aspect): Reimplemented.
	* aspects.ads (Find_Aspect): New routine.
	(Find_Value_Of_Aspect): New routine, previously known as Find_Aspect.
	* exp_ch5.adb (Expand_Iterator_Loop): Update the call to Find_Aspect.
	* exp_util.adb (Is_Iterated_Container): Update the call to Find_Aspect.
	* sem_ch4.adb (Try_Container_Indexing): Update calls to Find_Aspect.
	* sem_ch5.adb (Analyze_Iterator_Specification): Update
	the call to Find_Aspect. Use function Has_Aspect for better
	readability.
	(Preanalyze_Range): Use function Has_Aspect for better readability.
	* sem_ch13.adb (Check_One_Function): Update the call to Find_Aspect.
	* sem_prag.adb (Analyze_Pragma): There is no longer need to
	look at the parent to extract the corresponding pragma for
	aspect Global.

2013-04-12  Robert Dewar  <dewar@adacore.com>

	* checks.adb, sem_elab.adb, repinfo.adb, sem_ch4.adb, restrict.adb,
	restrict.ads: Minor reformatting.

2013-04-12  Ed Schonberg  <schonberg@adacore.com>

	* lib-xref.adb: Retrieve original name of classwide type if any.

2013-04-12  Thomas Quinot  <quinot@adacore.com>

	* exp_ch11.ads: Minor reformatting.

2013-04-12  Hristian Kirtchev  <kirtchev@adacore.com>

	* aspects.adb: Alphabetize subprogram bodies in this unit. Add
	an entry for Aspect_Ghost in the table of canonical aspects.
	(Has_Aspect): New routine.
	* aspects.ads: Add Aspect_Ghost to all relevant
	tables. Alphabetize subprograms in this unit.
	(Has_Aspect): New routine.
	* einfo.adb: Add with and use clauses for Aspects.
	(Is_Ghost_Function): New routine.
	* einfo.ads: Add new synthesized attribute Is_Ghost_Function and
	update the structure of the related nodes.
	(Is_Ghost_Function): New routine.
	* exp_ch4.adb (Find_Enclosing_Context): Use routine
	Is_Body_Or_Package_Declaration to terminate a search.
	(Is_Body_Or_Unit): Removed.
	* exp_util.adb (Within_Case_Or_If_Expression): Use routine
	Is_Body_Or_Package_Declaration to terminate a search.
	* par-prag.adb: Add pragma Ghost to the list of pragmas that do
	not need special processing by the parser.
	* sem_attr.adb (Analyze_Access_Attribute): Detect an
	illegal use of 'Access where the prefix is a ghost function.
	(Analyze_Attribute): Use routine Is_Body_Or_Package_Declaration
	to terminate a search.	(Check_References_In_Prefix): Use routine
	Is_Body_Or_Package_Declaration to terminate a search.
	* sem_ch4.adb (Analyze_Call): Mark a function when it appears
	inside an assertion expression.  Verify the legality of a call
	to a ghost function.
	(Check_Ghost_Function_Call): New routine.
	* sem_ch6.adb (Analyze_Function_Call): Code reformatting. Move
	the setting of attribute In_Assertion_Expression to Analyze_Call.
	(Check_Overriding_Indicator): Detect an illegal attempt to
	override a function with a ghost function.
	* sem_ch12.adb (Preanalyze_Actuals): Detect an illegal use of
	a ghost function as a generic actual.
	* sem_elab.adb (Check_Internal_Call_Continue): Update the call
	to In_Assertion.
	* sem_prag.adb: Add an entry for pragma Ghost in the table
	of significant arguments.
	(Analyze_Pragma): Do not analyze
	an "others" case guard. Add processing for pragma Ghost. Use
	Preanalyze_Assert_Expression when analyzing the expression of
	pragmas Loop_Invariant and Loop_Variant.
	* sem_util.adb (Get_Subprogram_Entity): Reimplemented.
	(Is_Body_Or_Package_Declaration): New routine.
	* sem_util.ads: Alphabetize subprotrams in this unit.
	(Is_Body_Or_Package_Declaration): New routine.
	* sinfo.adb (In_Assertion): Rename to In_Assertion_Expression.
	(Set_In_Assertion): Rename to Set_In_Assertion_Expression.
	* sinfo.ads: Rename flag In_Assertion to In_Assertion_Expression
	to better reflect its use.  Update all places that mention the flag.
	(In_Assertion): Rename to In_Assertion_Expression. Update
	related pragma Inline.	(Set_In_Assertion): Rename to
	Set_In_Assertion_Expression. Update related pragma Inline.
	* snames.ads-tmpl: Add new predefined name Ghost. Add new pragma
	id Pragma_Ghost.

2013-04-12  Arnaud Charlet  <charlet@adacore.com>

	* sem_prag.adb (Set_Imported): Do not generate error for multiple
	Import in CodePeer mode.
	* s-rident.ads: Fix minor typo.

2013-04-12  Ed Schonberg  <schonberg@adacore.com>

	* checks.adb (Insert_Valid_Check): Do not insert validity check
	in the body of the generated predicate function, to prevent
	infinite recursion.

2013-04-12  Ed Schonberg  <schonberg@adacore.com>

	* s-rident.ads: Add various missing Ada 2012 restrictions:
	No_Access_Parameter_Allocators, No_Coextensions,
	No_Use_Of_Attribute, No_Use_Of_Pragma.
	* snames.ads-tmpl: Add corresponding names.
	* restrict.ads restrict.adb: Subprograms and data structures to
	handle aspects No_Use_Of_Attribute and No_Use_Of_Pragma.
	* sem_ch4.adb: Correct name of restrictions is
	No_Standard_Allocators_After_Elaboration.
	* sem_ch13.adb (Analyze_Attribute_Definition_Clause): Check
	violation of restriction No_Use_Of_Attribute.
	* sem_prag.adb (Process_Restrictions_Or_Restriction_Warnings):
	Set restrictions No_Use_Of_Pragma and No_Use_Of_Attribute.
	(Analyze_Pragma): Check violation of restriction No_Use_Of_Pragma.
	* sem_res.adb: Check restrictions No_Access_Parameter_Allocators
	and No_Coextensions.
	* bcheck.adb: Correct name of restrictions is
	No_Standard_Allocators_After_Elaboration.
	* gnatbind.adb: Correct name of restrictions is
	No_Standard_Allocators_After_Elaboration.

2013-04-12  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Analyze_Pragma, (Check_Mode_Restriction_In_Function):
	Correct error message format.

2013-04-12  Robert Dewar  <dewar@adacore.com>

	* sem_attr.adb: Minor reformatting.

2013-04-12  Ed Schonberg  <schonberg@adacore.com>

	* sem_elab.adb (Within_Elaborate_All): Do not examine a context
	item that has not been analyzed, because the unit may have errors,
	or the context item may come from a proper unit inserted at the
	point of a stub and not analyzed yet.

2013-04-12  Thomas Quinot  <quinot@adacore.com>

	* gnat1drv.adb, repinfo.adb, repinfo.ads (Repinfo.List_Array_Info,
	List_Record_Info): Also include scalar storage order information in
	output.

2013-04-12  Yannick Moy  <moy@adacore.com>

	* sem_ch6.adb (Process_Contract_Cases): Update code to apply to
	Contract_Cases instead of Contract_Case pragma.

2013-04-12  Robert Dewar  <dewar@adacore.com>

	* a-cfdlli.ads, g-socket.adb, s-fileio.adb: Minor reformatting.

2013-04-12  Yannick Moy  <moy@adacore.com>

	* sem_attr.adb (Analyze_Attribute): Update analyse of
	Attribute_Old and Attribute_Result so they are allowed in the
	right-hand-side of an association in a Contract_Cases pragma.
	* sem_prag.adb (Analyze_CTC_In_Decl_Part): Add pre-analysis of
	the expressions in a Contract_Cases pragma.

2013-04-12  Robert Dewar  <dewar@adacore.com>

	* sem.ads, opt.ads: Minor comment edits.
	* sem_warn.adb, sem_ch6.adb: Minor reformatting.

2013-04-12  Claire Dross  <dross@adacore.com>

	* a-cfdlli.adb a-cfdlli.ads (List, Not_No_Element, Iterate,
	Reverse_Iterate, Query_Element, Update_Element, Read, Write): Removed,
	not suitable for formal analysis.

2013-04-12  Ed Schonberg  <schonberg@adacore.com>

	* sem_prag.adb (Analyze_Abstract_State): Use Defining entity
	to locate package entity, which may be a child unit.

2013-04-12  Thomas Quinot  <quinot@adacore.com>

	* g-socket.adb, g-socket.ads (Connect_Socket, version with timeout): If
	the specified timeout is 0, do not attempt to determine whether the
	connection succeeded.

2013-04-12  Doug Rupp  <rupp@adacore.com>

	* s-fileio.adb (Form_RMS Context_Key): Fix some thinkos.

2013-04-12  Doug Rupp  <rupp@adacore.com>

	* s-fileio.adb: Minor reformatting.

2013-04-12  Ed Schonberg  <schonberg@adacore.com>

	* sem_warn.adb (Check_Infinite_Loop_Warning): Do not warn if
	the last statement in the analyzed loop is an unconditional
	exit statement.

2013-04-12  Robert Dewar  <dewar@adacore.com>

	* opt.ads (Style_Check_Main): New switch.
	* sem.adb (Semantics): Set Style_Check flag properly for new
	unit to be analyzed.
	* sem_ch10.adb (Analyze_With_Clause): Don't reset Style_Check,
	the proper setting of this flag is now part of the Semantics
	procedure.
	* switch-c.adb (Scan_Front_End_Switches): Set Style_Check_Main
	for -gnatg and -gnaty

2013-04-12  Doug Rupp  <rupp@adacore.com>

	* s-crtl.ads (fopen, freopen): Add vms_form parameter
	* i-cstrea.ads (fopen, freopen): Likewise.
	* adaint.h (__gnat_fopen, __gnat_freopen): Likewise.
	* adaint.c (__gnat_fopen, __gnat_freopen): Likewise.
	[VMS]: Split out RMS keys and call CRTL function appropriately.
	* s-fileio.adb (Form_VMS_RMS_Keys, Form_RMS_Context_Key): New
	subprograms.
	(Open, Reset): Call Form_VMS_RMS_Keys. Call fopen,freopen with
	vms_form
	* gnat_rm.texi: Document implemented RMS keys.

2013-04-12  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch13.adb (Analyze_Aspect_Specifications):
	Insert the corresponding pragma for aspect Abstract_State at
	the top of the visible declarations of the related package.
	Previously this was only done when the package is a compilation
	unit.

2013-04-12  Arnaud Charlet  <charlet@adacore.com>

	* gnat_ugn.texi: Further menu clean ups.
	* sem_prag.adb, opt.ads: Minor reformatting.
	* sem_util.ads: Minor comment fix.

2013-04-12  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch13.adb (Analyze_Aspect_Specifications): Aspect
	Depends is now a delayed aspect. The delay is required
	due to the interplay between aspects Depends and Global.
	(Check_Aspect_At_Freeze_Point): Add an entry for aspect Depends.
	* sem_prag.adb: Reformat various error messages.
	(Add_Item): New subsidiary routine.
	(Analyze_Pragma): Add new variables
	Global_Seen, Result_Seen, Subp_Inputs and Subp_Outputs. The
	analysis of pragma Depends now has the capability to check
	the proper mode and usage of subprogram inputs and outputs.
	(Appears_In): New routine.
	(Check_Function_Return): New routine.
	(Check_Mode): New routine.
	(Check_Usage): New routine.
	(Collect_Subprogram_Inputs_Outputs): New routine.

2013-04-12  Bob Duff  <duff@adacore.com>

	* par-ch7.adb (P_Package): Initialize Sloc in the newly-pushed scope
	stack entry.

2013-04-12  Robert Dewar  <dewar@adacore.com>

	* switch-c.adb: Minor fix to wording of error message for
	-gnatet/eT.

2013-04-12  Robert Dewar  <dewar@adacore.com>

	* impunit.adb: Add s-multip and s-mudido to list of impl defined
	system units.
	* gnat_rm.texi: Add documentation for
	System.Multiprocessors[.Dispatching_Domains].

2013-04-12  Ben Brosgol  <brosgol@adacore.com>

	* gnat_ugn.texi: Completion of menu cleanups.

2013-04-12  Arnaud Charlet  <charlet@adacore.com>

	* sem_prag.adb (Diagnose_Multiple_Pragmas): Relax the rules
	in Relaxed_RM_Semantics.

2013-04-12  Arnaud Charlet  <charlet@adacore.com>

	* set_targ.adb (elab code): Add support for non gcc back-ends
	where save_argv is null.

2013-04-12  Robert Dewar  <dewar@adacore.com>

	* gnat1drv.adb (Gnat1drv): Test Target_Dependent_Info_Write_Name.
	* opt.ads (Target_Dependent_Info_Read): Add _Name, now an access
	type (Target_Dependent_Info_Write): Add _Name, now an access type.
	* set_targ.adb (Write_Target_Dependent_Values): Use name
	from -gnatet switch stored in Target_Dependent_Info_Write_Name
	(Read_Target_Dependent_Values): Use name from -gnateT switch
	stored in Target_Dependent_Info_Read_Name.
	* switch-c.adb: New form of -gnatet and -gnateT switches.
	* usage.adb: New form of -gnatet and -gnateT switches with
	file name.

2013-04-11  Eric Botcazou  <ebotcazou@adacore.com>

        * gcc-interface/decl.c (elaborate_expression_1): Skip only constant
        arithmetics when looking for a read-only variable in the expression.

2013-04-11  Javier Miranda  <miranda@adacore.com>

	* check.ads, exp_ch6.adb (Install_Null_Excluding_Check): No check in
	interface thunks since it is performed at the caller side.
	(Expand_Simple_Function_Return): No accessibility check needed in thunks
	since the check is done by the target routine.

2013-04-11  Ed Schonberg  <schonberg@adacore.com>

	* sem_prag.adb (Analyze_Pragma, case Priority): pre-analyze
	expression with type Any_Priority.
	* exp_ch9.adb (Initialize_Protection): Check that the value
	of the priority expression is within the bounds of the proper
	priority type.

2013-04-11  Robert Dewar  <dewar@adacore.com>

	* sem_prag.adb, prj-env.adb: Minor reformatting.

2013-04-11  Ben Brosgol  <brosgol@adacore.com>

	* gnat_ugn.texi: Clean ups.

2013-04-11  Yannick Moy  <moy@adacore.com>

	* set_targ.adb: Minor comment update.

2013-04-11  Pascal Obry  <obry@adacore.com>

	* gnat_ugn.texi: Remove obsolete comment about DLL calling
	convention.

2013-04-11  Javier Miranda  <miranda@adacore.com>

	* exp_ch6.adb (Expand_Call): For the call to the target primitive
	of an interface thunks do not compute the extra actuals; just
	propagate the extra actuals received by the thunk.
	* exp_disp.adb (Expand_Interface_Thunk): Decorate new attribute
	Thunk_Entity.
	* sem_ch6.adb (Create_Extra_Formals): Do not generate extra
	formals in interface thunks whose target primitive has no extra
	formals.

2013-04-11  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Analyze_Pragma): Detect
	a renaming by looking at the Renamed_Object attribute.
	(Is_Renaming): Removed.

2013-04-11  Vincent Celier  <celier@adacore.com>

	* prj-env.adb (Initialize_Default_Project_Path): Take
	into account a project path file, specified by environment
	variable GPR_PROJECT_PATH_FILE, before taking into account
	GPR_PROJECT_PATH.
	* projects.texi: Add documentation for GPR_PROJECT_PATH_FILE

2013-04-11  Ed Schonberg  <schonberg@adacore.com>

	* a-cdlili.adb, a-cdlili.ads, a-cihama.adb, a-cihama.ads, a-coinve.adb,
	a-coinve.ads, a-ciorse.adb, a-ciorse.ads, a-coorma.adb, a-coorma.ads,
	a-cfdlli.adb, a-cfdlli.ads, a-cborma.adb, a-cborma.ads, a-cidlli.adb,
	a-cidlli.ads, a-ciormu.adb, a-ciormu.ads, a-cihase.adb, a-cihase.ads,
	a-cohama.adb, a-cohama.ads, a-coorse.adb, a-coorse.ads, a-cbhama.adb,
	a-cbhama.ads, a-cborse.adb, a-cborse.ads, a-ciorma.adb, a-cobove.adb,
	a-ciorma.ads, a-cobove.ads, a-coormu.adb, a-coormu.ads, a-cohase.adb,
	a-cohase.ads, a-cbdlli.adb, a-cbdlli.ads, a-cbhase.adb, a-cbhase.ads:
	Move Iterator operations from body to private part of spec.

2013-04-11  Eric Botcazou  <ebotcazou@adacore.com>

	* ttypes.ads, get_targ.ads: More minor rewording of comments.

2013-04-11  Johannes Kanig  <kanig@adacore.com>

	* debug.adb: Document use of switch -gnatd.Z.

2013-04-11  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Analyze_Pragma): Both pragma Depends and Global can now
	support renamings of entire objects. Legal renamings are replaced by
	the object they rename.
	(Is_Renaming): New routine.

2013-04-11  Yannick Moy  <moy@adacore.com>

	* set_targ.adb, opt.ads: Minor changes in comments.

2013-04-11  Ben Brosgol  <brosgol@adacore.com>

	* gnat_ugn.texi: Minor clean ups.

2013-04-11  Robert Dewar  <dewar@adacore.com>

	* nlists.ads, nlists.adb, treepr.adb, treepr.ads: Move debugging
	function p from Nlists to Treepr.

2013-04-11  Ed Schonberg  <schonberg@adacore.com>

	* sem_disp.adb (Check_Dispatching_Context): If the context is
	a contract for a null procedure defer error reporting until
	postcondition body is created.
	* exp_ch13.adb (Expand_N_Freeze_Entity): If the entity is a
	null procedure, complete the analysis of its contracts so that
	calls within classwide conditions are properly rewritten as
	dispatching calls.

2013-04-11  Thomas Quinot  <quinot@adacore.com>

	* sem_ch10.adb, sem_ch12.adb: Minor reformatting.

2013-04-11  Robert Dewar  <dewar@adacore.com>

	* exp_attr.adb, sem_res.adb, sem_attr.adb: Minor reformatting.

2013-04-11  Robert Dewar  <dewar@adacore.com>

	* atree.adb, atree.ads (Node31): New function.
	(Set_Node31): New procedure.

2013-04-11  Robert Dewar  <dewar@adacore.com>

	* errout.ads: Minor typo correction.

2013-04-11  Javier Miranda  <miranda@adacore.com>

	* einfo.ad[sb] (Thunk_Entity/Set_Thunk_Entity): New attribute.

2013-04-11  Robert Dewar  <dewar@adacore.com>

	* back_end.adb (Register_Back_End_Types): Moved to Get_Targ
	* back_end.ads (C_String): Moved to Get_Targ
	(Register_Type_Proc): Moved to Get_Targ (Register_Back_End_Types):
	Moved to Get_Targ.
	* cstand.adb (Register_Float_Type): New interface
	(Create_Back_End_Float_Types): Use entries in FPT_Mode_Table.
	* get_targ.adb (Register_Back_End_Types): Moved here from
	Back_End.
	* get_targ.ads (C_String): Moved here from Back_End
	(Register_Type_Proc): Moved here from Back_End
	(Register_Back_End_Types): here from Back_End.
	* gnat1drv.adb (GGnat11drv): Add call to
	Write_Target_Dependent_Values;
	* lib-writ.ads, lib-writ.adb (Write_ALI): Remove section writing
	obsolete target dependent info.
	* opt.ads (Generate_Target_Dependent_Info):
	Removed (Target_Dependent_Info_Read): New flag
	(Target_Dependent_Info_Write): New flag
	* output.adb: Minor comment change
	* s-os_lib.ads: Minor reformatting
	* set_targ.ads, set_targ.adb: Minor reformatting.
	* switch-c.adb (Scan_Switches.First_Ptr): New variable
	(Scan_Front_End_Switches): Check -gnatd.b, -gnateT come first
	(Scan_Front_End_Switches): Handle -gnatet, -gnateT
	* ttypes.ads: Remove documentation section on target dependent
	info in ali file Remove four letter codes, no longer used Instead
	of using Get_Targ.Get_xxx, we use Set_Targ.xxx
	* usage.adb: Add usage lines for -gnatet/-gnateT
	* gcc-interface/Make-lang.in: Update dependencies.

2013-04-11  Thomas Quinot  <quinot@adacore.com>

	* sem_ch4.adb: Update documentation.
	* sinfo.ads (N_Expression_With_Actions): Ditto.

2013-04-11  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch13.adb (Analyze_Aspect_Specifications):
	Add a guard to prevent the double insertion of the same aspect
	into a rep item list. This previously led to a circularity.

2013-04-11  Ed Schonberg  <schonberg@adacore.com>

	* sem_attr.adb (Eval_Attribute, case 'Access): Reject attribute
	reference if the prefix is the dereference of an anonymous access
	to subprogram type.
	* exp_attr.adb (Expand_N_Attribute_Reference, Access_Cases): Handle
	properly a reference to the current instance of a protected type
	from within a protected subprogram.
	* sem_res.adb (Find_Unique_Access_Type): Treat
	Attribute_Access_Type like Allocator_Type when resolving an
	equality operator.

2013-04-11  Arnaud Charlet  <charlet@adacore.com>

	* xgnatugn.adb: Remove obsolete comments.

2013-04-11  Robert Dewar  <dewar@adacore.com>

	* back_end.ads, back_end.adb: Minor reformatting.
	* set_targ.ads, set_targ.adb: New files.

2013-04-11  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_case.adb (Check_Against_Predicate): New routine.
	(Check_Choices): When the type covered by the list of choices
	is a static subtype with a static predicate, check all choices
	agains the predicate.
	(Issue_Msg): All versions removed.
	(Missing_Choice): New routines.
	* sem_ch4.adb: Code and comment reformatting.
	(Analyze_Case_Expression): Do not check the choices when the case
	expression is being preanalyzed and the type of the expression
	is a subtype with a static predicate.
	(Has_Static_Predicate): New routine.
	* sem_ch13.adb: Code and comment reformatting.	(Build_Range):
	Always build a range even if the low and hi bounds denote the
	same value. This is needed by the machinery in Check_Choices.
	(Build_Static_Predicate): Always build a range even if the low and
	hi bounds denote the same value. This is needed by the machinery
	in Check_Choices.

2013-04-11  Robert Dewar  <dewar@adacore.com>

	* einfo.ads, sem_util.adb, exp_ch6.adb, xgnatugn.adb: Minor
	reformatting.

2013-04-11  Doug Rupp  <rupp@adacore.com>

	* gnatlink.adb: Fold program basename to lower case on VMS for
	consistency.

2013-04-11  Matthew Heaney  <heaney@adacore.com>

	* a-rbtgbo.adb (Generic_Equal): Initialize Result variable before
	entering loop.

2013-04-11  Arnaud Charlet  <charlet@adacore.com>

	* xgnatugn.adb: Remove dead code (handling of @ifset/@ifclear).

2013-04-11  Arnaud Charlet  <charlet@adacore.com>

	* gnat_ugn.texi: Remove some use of ifset in menus. Not strictly
	needed, and seems to confuse some versions of makeinfo.

2013-04-11  Javier Miranda  <miranda@adacore.com>

	* einfo.adb (Is_Thunk): Remove assertion.
	(Set_Is_Thunk): Add assertion.
	* einfo.ads (Is_Thunk): Complete documentation.
	* exp_ch11.adb (Expand_N_Handled_Sequence_Of_Statements): Code cleanup.
	* exp_ch3.ad[sb] (Is_Variable_Size_Array): Moved to sem_util
	(Is_Variable_Size_Record): Moved to sem_util
	* exp_ch6.adb (Expand_Call): Code cleanup.
	(Expand_N_Extended_Return_Statement): Code cleanup.
	(Expand_Simple_Function_Return): Code cleanup.
	* exp_disp.adb Remove dependency on exp_ch3
	(Expand_Interface_Thunk): Add minimum decoration needed to set
	attribute Is_Thunk.
	* sem_ch3.ad[sb] (Is_Constant_Bound): moved to sem_util
	* sem_util.ad[sb] (Is_Constant_Bound): Moved from
	sem_ch3 (Is_Variable_Size_Array): Moved from exp_ch3
	(Is_Variable_Size_Record): Moved from exp_ch3

2013-04-11  Javier Miranda  <miranda@adacore.com>

	* exp_ch11.adb (Expand_N_Handled_Sequence_Of_Statements): Do
	not add cleanup actions in thunks associated with interface types.
	* exp_ch3.ad[sb] (Is_Variable_Size_Record): Move declaration to
	the package spec.
	* exp_ch4.adb (Tagged_Conversion): Update call to
	Expand_Interface_Conversion since the parameter Is_Static is no
	longer needed.
	* exp_ch6.adb (Expand_N_Extended_Return_Statement): Adding
	assertion to ensure that interface thunks are never handled by
	this routine.
	(Expand_N_Simple_Function_Return): Do not rewrite this statement
	as an extended return statement in interface thunks, and do not
	perform copy in the secondary stack if the return statement is
	located in a thunk.
	* exp_disp.adb (Expand_Dispatching_Call): No longer displace
	the pointer to the returned object in functions returning interface
	types.
	(Expand_Interface_Thunk): For functions returning interface types
	displace the pointer to the returned object.
	(Expand_Interface_Conversion): Remove formal
	Is_Static since this subprogram can now evaluate it locally.
	* sem_ch3.adb (Add_Internal_Interface_Entities): For functions
	propagate the type returned by the covered interface primitive to
	the internal interface entity. Needed by the thunk to generate
	the code which displaces "this" to reference the corresponding
	secondary dispatch table.
	* sem_disp.adb (Propagate_Tag): Update call to
	Expand_Interface_Conversion since the parameter Is_Static is no
	longer needed.
	* sem_res.adb (Resolve_Type_Conversion): Update calls to
	Expand_Interface_Conversion since the parameter Is_Static is no
	longer needed plus code cleanup.

2013-04-11  Eric Botcazou  <ebotcazou@adacore.com>

	* init.c (RETURN_ADDR_OFFSET): Delete as unused.

2013-04-11  Robert Dewar  <dewar@adacore.com>

	* a-crbtgk.adb, a-ciorse.adb, a-crbtgo.adb, a-coorse.adb, a-rbtgbo.adb,
	a-cborse.adb, a-rbtgso.adb, exp_ch3.adb: Minor reformatting.

2013-04-11  Yannick Moy  <moy@adacore.com>

	* exp_ch4.adb (Expand_N_Selected_Component): Do not expand
	discriminant check for Unchecked_Union.
	* sem_res.adb (Resolve_Selected_Component): Set flag
	Do_Discriminant_Check even when expansion is not performed.
	* sinfo.ads (Do_Discriminant_Check): Update documentation for the case
	of Unchecked_Union.

2013-04-11  Thomas Quinot  <quinot@adacore.com>

	* sem_ch13.adb (Same_Representation): Two types with different scalar
	storage order never have the same representation.

2013-04-11  Arnaud Charlet  <charlet@adacore.com>

	* xgnatugn.adb (Push_Conditional): Simplify handling,
	no longer need to keep track of "excluding" sections.
	(Currently_Excluding): Removed.
	(Process_Source_File):
	Set unw/vms flag so that texinfo can do the whole handling of
	@ifset/@ifclear sections.  Fix handling of nested @ifset/@ifclear
	sections.
	* gnat_ugn.texi: Add a section on performing unassisted install
	on Windows.

2013-04-11  Johannes Kanig  <kanig@adacore.com>

	* debug.adb: Document usage of -gnatd.Q switch.

2013-04-11  Matthew Heaney  <heaney@adacore.com>

	* a-crbtgk.adb (Ceiling, Find, Floor): Adjust locks
	before element comparisons.
	(Generic_Conditional_Insert, Generic_Conditional_Insert_With_Hint):
	Ditto.
	* a-crbtgo.adb, a-rbtgbo.adb (Generic_Equal): Adjust locks before
	element comparisons.
	* a-rbtgso.adb (Difference, Intersection): Adjust locks
	before element comparisons.
	(Is_Subset, Overlap): Ditto
	(Symmetric_Difference, Union): Ditto
	* a-btgbso.adb (Set_Difference, Set_Intersection): Adjust locks
	before element comparisons.
	(Set_Subset, Set_Overlap): Ditto
	(Set_Symmetric_Difference, Set_Union): Ditto
	* a-coorse.adb, a-ciorse.adb, a-cborse.adb
	(Update_Element_Preserving_Key): Adjust locks before element
	comparisons (Replace_Element): Ditto

2013-04-11  Pascal Obry  <obry@adacore.com>

	* prj-attr.adb, projects.texi, snames.ads-tmpl: Remove Build_Slaves
	attribute.

2013-04-11  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch3.adb (Build_Equivalent_Aggregate): Subsidiary of
	Expand_N_Object_Declaration, used to construct an aggregate
	with static components whenever possible, so that objects of a
	discriminated type can be initialized without calling the init.
	proc for the type.

2013-04-11  Vincent Celier  <celier@adacore.com>

	* prj-makr.adb (Process_Directory): On VMS, always delete,
	then recreate the temporary file with Create_Output_Text_File,
	otherwise the output redirection does not work properly.

2013-04-11  Eric Botcazou  <ebotcazou@adacore.com>

	* urealp.ads: Fix minor typo.

2013-04-11  Fabien Chouteau  <chouteau@adacore.com>

	* cio.c (mktemp): Don't use tmpnam function from the
	system on VxWorks in kernel mode.

2013-04-11  Vincent Celier  <celier@adacore.com>

	* make.adb (Compile): Clarify the error message reported
	when gnatmake refuses to compile a runtime source.
	(Start_Compile_If_Possible): Ditto.

2013-04-11  Vincent Celier  <celier@adacore.com>

	* gnat_ugn.texi: Add documentation about -gnatc and gnatmake.

2013-04-11  Vincent Celier  <celier@adacore.com>

	* switch-c.adb: Document internal switches.
	* usage.adb: Remove lines for internal switches: -gnatea, -gnateO,
	-gnatez and -gnateO.

2013-04-11  Ed Schonberg  <schonberg@adacore.com>

	* par-ch6.adb (P_Subprogram): Attach aspects to subprogram stub.
	* sem_ch6.adb (Analyze_Subprogram_Body_Helper): Allow aspects on
	subprogram stubs.
	* sem_ch13.adb (Analyze_Aspect_Specifications): Analyze generated
	pre/post pragmas at once before analyzing the proper body.
	* sem_prag.adb (Chain_PPC): Handle pragma that comes from an
	aspect on a subprogram stub.
	* aspects.adb: Aspect specifications can appear on a
	subprogram_Body_Stub.

2013-04-11  Vincent Celier  <celier@adacore.com>

	* gnatname.adb: Minor comment fix.

2013-04-11  Vincent Celier  <celier@adacore.com>

	* prj-makr.adb (Process_Directory): Create a new temporary
	file for each invocation of the compiler, in directory pointed
	by environment variable TMPDIR if it exists.

2013-04-11  Arnaud Charlet  <charlet@adacore.com>

	* gnat_ugn.texi: Minor editing/clean ups.

2013-04-11  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch6.adb (Analyze_Null_Procedure): New subprogram, mostly
	extracted from Analyze_Subprogram_Declaration, to handle null
	procedure declarations that in ada 2012 can be completions of
	previous declarations.

2013-04-11  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Entity_Of): Moved to Exp_Util.
	* exp_util.ads, exp_util.adb (Entity_Of): New routine.

2013-04-11  Robert Dewar  <dewar@adacore.com>

	* g-spipat.ads: Minor comment fix.

2013-04-11  Robert Dewar  <dewar@adacore.com>

	* sem_prag.adb, sem_util.adb, sem_res.adb, exp_ch4.adb: Minor
	reformatting.

2013-04-11  Thomas Quinot  <quinot@adacore.com>

	* exp_util.ads (Fully_Qualified_Name_String): Document that the
	constructed literal is the entity name in all upper case.

2013-04-11  Thomas Quinot  <quinot@adacore.com>

	* sem_util.adb (Set_Entity_With_Style_Check): Fix logic of
	check for implementation defined identifiers.

2013-04-11  Yannick Moy  <moy@adacore.com>

	* checks.adb (Apply_Type_Conversion_Checks): Add an explanation
	of why range check and length are put on different nodes.
	* exp_ch4.adb (Apply_Type_Conversion_Checks): Remove check marks
	when doing their expansion.

2013-04-11  Ed Schonberg  <schonberg@adacore.com>

	* sem_util.ads, sem_util.adb (Get_Incomplete_View_Of_Ancestor):
	New function to implement the notion introduced in RM 7.3.1
	(5.2/3): in a child unit, a derived type is within the derivation
	class of an ancestor declared in a parent unit, even if there
	is an intermediate derivation that does not see the full view
	of that ancestor.
	* sem_res.adb (Valid_Conversion): if all else fails, examine if an
	incomplete view of an ancestor makes a numeric conversion legal.

2013-04-11  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch6.adb: in Ada2012 operators can only have in
	parameters.

2013-04-11  Vincent Celier  <celier@adacore.com>

	* makeutl.adb (Create_Binder_Mapping_File): Do not put into
	the mapping file ALI files of sources that have been replaced.

2013-04-11  Vincent Celier  <celier@adacore.com>

	* projects.texi: Add subsection Duplicate Sources in Projects.

2013-04-11  Vincent Celier  <celier@adacore.com>

	* gnat_ugn.texi: Add documentation for gnatmake switch -droot_dir/**

2013-04-11  Arnaud Charlet  <charlet@adacore.com>

	* init.c (__gnat_install_handler): Only set up an alternate
	stack when installing a signal handler for SIGSEGV.

2013-04-11  Thomas Quinot  <quinot@adacore.com>

	* g-socket.adb (Connect_Socket, timeout version): Call
	underlying connect operation directly, not through the 2-argument
	Connect_Socket thick binding, in order to avoid raising a junk
	exception for the EINPROGRESS return.

2013-04-11  Robert Dewar  <dewar@adacore.com>

	* a-cdlili.adb: Minor addition of pragma Warnings (Off).

2013-04-11  Robert Dewar  <dewar@adacore.com>

	* hostparm.ads: Minor reformatting.

2013-04-11  Hristian Kirtchev  <kirtchev@adacore.com>

	* aspects.ads, aspects.adb: Add Aspect_Depends to all the relevant
	tables.
	* elists.ads, elists.adb (Contains): New routine.
	* par-prag.adb: Pragma Depends does not need any special treatment
	by the parser.
	* sem_ch13.adb (Analyze_Aspect_Specifications):
	Transform aspect Depends into a corresponding pragma.
	(Check_Aspect_At_Freeze_Point): Aspect Depends does not need
	inspection at its freeze point.
	* sem_prag.adb (Analyze_Pragma): Perform analysis and
	normalization of pragma Depends. Remove the use of function
	Is_Duplicate_Item. Use End_Scope to uninstalle the formal
	parameters of a subprogram. Add a value for pragma Depends in
	table Sig_Flags.
	(Is_Duplicate_Item): Removed.
	* snames.ads-tmpl: Add predefined name for Depends as well as
	a pragma identifier.

2013-04-11  Arnaud Charlet  <charlet@adacore.com>

	* gnat1drv.adb: Minor code clean up.

2013-04-11  Arnaud Charlet  <charlet@adacore.com>

	* debug.adb, sem_ch13.adb (Analyze_Enumeration_Representation_Clause):
	Ignore enumeration rep clauses by default in CodePeer mode, unless
	-gnatd.I is specified.

2013-04-11  Ed Schonberg  <schonberg@adacore.com>

	* sem_util.adb (Safe_To_Capture_Value): If the node belongs to
	an expression that has been attached to the else_actions of an
	if-expression, the capture is not safe.

2013-04-11  Yannick Moy  <moy@adacore.com>

	* checks.adb (Apply_Type_Conversion_Checks): Put check mark on type
	conversion for arrays.

2013-04-11  Robert Dewar  <dewar@adacore.com>

	* a-cdlili.adb, a-cidlli.adb, a-cbdlli.adb: Minor reformatting.

2013-04-11  Johannes Kanig  <kanig@adacore.com>

	* adabkend.adb: Minor comment addition.

2013-04-11  Matthew Heaney  <heaney@adacore.com>

	* a-cdlili.adb, a-cidlli.adb, a-cbdlli.adb ("="): Increment
	lock counts before entering loop.
	(Find): Ditto.
	(Is_Sorted, Merge, Sort): Ditto.
	(Reverse_Find): Ditto.
	(Splice_Internal): Internal operation to refactor splicing logic.
	(Splice): Some logic moved into Splice_Internal.

2013-04-11  Johannes Kanig  <kanig@adacore.com>

	* adabkend.adb (Scan_Compiler_Arguments): Do not call
	Set_Output_Object_File_Name in Alfa_Mode
	* gnat1drv.adb (Adjust_Global_Switches): Take Alfa_Mode into account.
	* opt.ads: Fix documentation.

2013-04-11  Robert Dewar  <dewar@adacore.com>

	* sem_res.adb: Minor code reorganization and comment fixes.
	* sem_type.adb: Minor reformatting.

2013-04-11  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch4.adb (Process_Transient_Object): Add new
	local variable Fin_Call. Remove and explain ??? comment. Use the
	Actions of logical operators "and then" and "or else" to insert
	the generated finalization call.

2013-04-11  Eric Botcazou  <ebotcazou@adacore.com>

	* gnat_rm.texi: Fix typo.

2013-04-11  Ed Schonberg  <schonberg@adacore.com>

	* sem_res.adb: Minor reformatting.

2013-04-11  Robert Dewar  <dewar@adacore.com>

	* atree.h: Add declarations for Flag255-Flag289 Fix declaration
	of Field30 (was wrong, but no effect, since not yet referenced by
	back end) Add declarations for Field31-Field35 Add declarations
	for Node31-Node35.
	* einfo.ads, einfo.adb (Has_Invariants): No longer applies to
	procedures.
	(Has_Predicates): No longer applies to functions.
	(Is_Predicate_Function): New flag.
	(Is_Predicate_Function_M): New flag.
	(Is_Invariant_Procedure): New flag.
	(Predicate_Function_M): New function.
	(Set_Predicate_Function_M): New procedure.
	* exp_ch11.adb (Expand_N_Raise_Expression): Take care of special
	case of appearing in predicate used for membership test.
	* exp_ch3.adb (Insert_Component_Invariant_Checks): Set
	Is_Invariant_Procedure flag.
	* exp_ch4.adb (Expand_Op_In): Call special predicate function
	that takes care of raise_expression nodes in the predicate.
	* exp_util.ads, exp_util.adb (Make_Predicate_Call): Add argument Mem for
	membership case.
	* sem_ch13.adb (Build_Predicate_Functions): New name for
	Build_Predicate_Function.  Major rewrite to take care of raise
	expression in predicate for membership tests.
	* sem_res.adb (Resolve_Actuals): Include both predicate functions
	in defense against infinite predicate function loops.
	* sinfo.ads, sinfo.adb (Convert_To_Return_False): New flag.

2013-04-11  Robert Dewar  <dewar@adacore.com>

	* sem_prag.adb: Minor reformatting.

2013-04-11  Ed Schonberg  <schonberg@adacore.com>

	* lib-xref.adb: Generate reference for component of anonymous
	access type.

2013-04-11  Robert Dewar  <dewar@adacore.com>

	* stand.ads: Minor reformatting.

2013-04-11  Matthew Heaney  <heaney@adacore.com>

	* a-convec.adb, a-coinve.adb, a-cobove.adb ("="): Increment lock
	counts before entering loop.
	(Find, Find_Index): Ditto.
	(Is_Sorted, Merge, Sort): Ditto.
	(Reverse_Find, Reverse_Find_Index): Ditto.

2013-04-11  Robert Dewar  <dewar@adacore.com>

	* exp_ch11.ads, exp_ch11.adb (Expand_N_Raise_Expression): New procedure.
	* exp_util.adb (Insert_Actions): Add entry for N_Raise_Expression.
	* expander.adb: Add call to Expand_N_Raise_Expression.
	* par-ch11.adb (P_Raise_Expression): New procedure.
	* par-ch4.adb (P_Relation): Handle Raise_Expression.
	* par.adb (P_Raise_Expression): New procedure.
	* sem.adb: Add handling for N_Raise_Expression.
	* sem_ch11.ads, sem_ch11.adb (Analyze_Raise_Expression): New procedure.
	* sem_res.adb (Resolve): Add handling for N_Raise_Expression.
	* sinfo.ads, sinfo.adb (N_Raise_Expression): New node.
	* sprint.adb (Sprint_Node_Actual): Add handling for N_Raise_Expression.
	* stand.ads (Any_Type): Document use with N_Raise_Expression.

2013-04-11  Vincent Celier  <celier@adacore.com>

	* gnat_ugn.texi: Remove section "The Development Environments"
	now that all predefined attributes are documented, including
	those in package IDE.

2013-04-11  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch6.adb: Preserve parent link in copy of expression.

2013-04-11  Vincent Celier  <celier@adacore.com>

	* projects.texi: Complete rewrite of the subsection Attributes
	in section "Project file Reference".

2013-04-11  Robert Dewar  <dewar@adacore.com>

	* exp_ch4.adb: Minor reformatting.

2013-04-11  Robert Dewar  <dewar@adacore.com>

	* exp_ch4.adb (Expand_Concatenate): Remove wrapping in
	expression-with-actions node. No longer needed given fix to
	sem_prag and caused loss of some useful warnings.
	* sem.ads: Minor reformatting.
	* sem_prag.adb (Check_Disabled): Removed, to be replaced by not
	Check_Enabled. These two routines were curiously incompatible
	causing confusion.
	(Analyze_Pragma, case Check): Make sure we do
	not expand the string argument if the check is disabled. Avoid
	use of Check_Disabled, which resulted in missing analysis in
	some cases.
	* sem_prag.ads (Check_Disabled): Removed, to be replaced by not
	Check_Enabled. These two routines were curiously incompatible
	causing confusion.

2013-04-11  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch4.adb (Process_Transient_Object): Use
	an unchecked conversion when associating a transient controlled
	object with its "hook".

2013-04-11  Ed Schonberg  <schonberg@adacore.com>

	* sem_prag.adb (Analyze_Pragma, case
	Preelaborable_Initialization): The pragma is legal if it comes
	from an aspect on the private view of the type, even though its
	analysis point takes place later at the freeze point.

2013-04-11  Robert Dewar  <dewar@adacore.com>

	* sem_ch6.adb: Minor reformatting.

2013-04-11  Yannick Moy  <moy@adacore.com>

	* ali-util.adb (Read_Withed_ALIs): Do not consider it an error to
	read ALI files with No_Object=True in Alfa mode.
	* gnat1drv.adb: Set appropriately Back_End_Mode in Alfa mode, whether
	this is during frame condition generation of translation to Why.

2013-04-11  Robert Dewar  <dewar@adacore.com>

	* exp_ch4.adb: Minor code reorganization
	* types.ads: Minor reformatting.

2013-04-11  Johannes Kanig  <kanig@adacore.com>

	* opt.ads New global boolean Frame_Condition_Mode to avoid
	referring to command line switch.
	* gnat1drv.adb (Gnat1drv) set frame condition mode when -gnatd.G
	is present, and disable Code generation in that case. Disable
	ALI file generation when switch is *not* present.

2013-04-11  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch6.adb (Analyze_Expression_Function): Perform the
	pre-analysis on a copy of the expression, to prevent downstream
	visbility issues involving operators and instantiations.

2013-04-11  Johannes Kanig  <kanig@adacore.com>

	* debug.adb: Reservation and documentation for -gnatd.G switch.
	* gnat1drv.adb (Adjust_Global_Switches) Take into account -gnatd.G
	switch, and set ALI file generation accordingly.

2013-04-11  Robert Dewar  <dewar@adacore.com>

	* exp_ch4.adb, exp_dist.adb: Minor reformatting.
	* gnat_rm.texi, gnat_ugn.texi: -020 Add documentation clarifying that
	check names introduced with pragma Check_Name are suppressed by -gnatp.

2013-04-11  Vincent Celier  <celier@adacore.com>

	* gnat_ugn.texi, projects.texi: Move chapter "Tools Supporting Project
	Files" from projects.texi to gnat_ugn.texi.

2013-04-11  Arnaud Charlet  <charlet@adacore.com>

	* gcc-interface/Make-lang.in: Update dependencies.

2013-04-11  Yannick Moy  <moy@adacore.com>

	* gnat1drv.adb (Adjust_Global_Switches): Allow missing body in Alfa
	mode.

2013-04-11  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch4.adb (Expand_N_Allocator): Detect the
	allocation of an anonymous controlled object where the type of
	the context is named. Use the pool and finalization master of
	the named access type to allocate the object.

2013-04-11  Vincent Celier  <celier@adacore.com>

	* gnat_ugn.texi: Remove most mentions of gprbuild.
	* projects.texi: Remove all mentions of asociative array
	attributes.

2013-04-11  Robert Dewar  <dewar@adacore.com>

	* sem_prag.adb, sem_attr.adb, gnat1drv.adb, prj-makr.adb,
	opt.ads, sem_ch13.adb: Minor reformatting.
	* debug.adb: Minor comment fix (remove junk .I doc).

2013-04-11  Thomas Quinot  <quinot@adacore.com>

	* rtsfind.ads, exp_dist.adb, exp_dist.ads (Rtsfind.PCS_Version, case
	PolyORB): Bump to 6.
	(Exp_Dist.PolyORB_Support): Replace TC_Build with
	Build_Complex_TC.

2013-04-11  Arnaud Charlet  <charlet@adacore.com>

	* debug.adb, sem_prag.adb, par-ch2.adb, sem_attr.adb, gnat1drv.adb,
	exp_disp.adb, opt.ads, sem_ch13.adb (Relaxed_RM_Semantics): New flag.
	Enable this flag in CodePeer mode, and also via -gnatd.M.
	Replace some uses of CodePeer_Mode by Relaxed_RM_Semantics.

2013-04-11  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch8.adb (Check_Constrained_Object): If a subtype is created
	from the renamed object in an object renaming declaration with
	an unconstrained nominal subtype, freeze the created subtype at
	once, to prevent order of elaboration issues in the backend.

2013-04-11  Arnaud Charlet  <charlet@adacore.com>

	* exp_aggr.adb (Aggr_Size_OK): Refine setting of Max_Aggr_Size
	in particular in CodePeer mode.

2013-04-11  Vincent Celier  <celier@adacore.com>

	* gnat_ugn.texi: Add documentation for backup copies of project
	files for gnatname.

2013-04-11  Tristan Gingold  <gingold@adacore.com>

	* gnat_rm.texi: Add Detect_BLocking in the ravenscar profile
	pragma list.

2013-04-11  Vincent Celier  <celier@adacore.com>

	* gnatname.adb (Scan_Args): Recognize new switch --no-backup
	(Usage): Add line for --no-backup.
	* opt.ads (No_Backup): New Boolean variable, initialized to False.
	(Ada_Version_Default): Switch to Ada 2012 by default.
	* prj-makr.adb (Initialize): Create a backup for an existing
	project file if gnatname is not invoked with --no-backup.

2013-04-11  Thomas Quinot  <quinot@adacore.com>

	* exp_ch4.adb: Minor code improvement: replace various calls to
	Make_If_Statement in expansion with Make_Implicit_If_Statement.

2013-04-11  Eric Botcazou  <ebotcazou@adacore.com>

	* ali.adb: Fix minor typo.

2013-04-11  Thomas Quinot  <quinot@adacore.com>

	* exp_ch4.adb (Find_Enclosing_Context): Add missing case of
	N_Procedure_Call_Statement.

2013-04-11  Robert Dewar  <dewar@adacore.com>

	* debug.adb: Minor comment fix.

2013-04-11  Johannes Kanig  <kanig@adacore.com>

	* debug.adb: Remove comment for -gnatd.G.

2013-04-11  Thomas Quinot  <quinot@adacore.com>

	* exp_ch4.adb (Expand_Record_Equality.Suitable_Element):
	Remove recursive routine, replace with...
	(Expand_Record_Equality.Element_To_Compare): New subroutine,
	implement iterative search for next element to compare.
	Add explanatory comment in the tagged case.

2013-04-11  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch5.adb: remove spurious warning from non-empty loop.
	* sem_ch8.adb (Enclosing_Instance): Make public to other routines
	in the package, in order to suppress redundant semantic checks
	on subprogram renamings in nested instantiations.

2013-04-11  Robert Dewar  <dewar@adacore.com>

	* errout.ads: Minor reformatting.
	* sem_eval.adb (Why_Not_Static): Now issues continuation messages
	(Why_Not_Static): Test for aggregates behind string literals.
	* sem_eval.ads (Why_Not_Static): Now issues continuation messages.

2013-04-11  Robert Dewar  <dewar@adacore.com>

	* exp_ch4.adb (Expand_Concatenation): Wrap expansion in
	Expressions_With_Actions.

2013-04-11  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch6.adb (Base_Types_Match): For an actual type in an
	instance, the base type may itself be a subtype, so find true
	base type to determine compatibility.

2013-04-11  Robert Dewar  <dewar@adacore.com>

	* s-osprim-mingw.adb, sem_ch3.adb, sem_prag.adb, sem_util.adb.
	makeutl.adb, sem_ch8.adb: Minor reformatting.

2013-04-11  Vincent Celier  <celier@adacore.com>

	* gnat_ugn.texi: Minor fixes for VMS.
	* ug_words: Minor addition: -gnato? => /OVERFLOW_CHECKS=?.

2013-04-11  Robert Dewar  <dewar@adacore.com>

	* usage.adb (Usage): Minor edit to -gnatW message

2013-04-11  Robert Dewar  <dewar@adacore.com>

	* exp_aggr.adb (Expand_N_Aggregate): Add circuit for handling
	others for string literal case. Also add big ??? comment about
	this new code, which should be redundant, but is not.
	* sem_eval.adb (Eval_Concatenation): Handle non-static case
	properly (Eval_String_Literal): Handle non-static literal properly

2013-03-20  Tobias Burnus  <burnus@net-b.de>

	* i-fortra.ads: Update comment, add Ada 2012's optional
	Star and Kind data types for enhanced interoperability.

2013-03-16  Eric Botcazou  <ebotcazou@adacore.com>

	* gnatvsn.ads (Library_Version): Bump to 4.9.

2013-03-08  Cesar Strauss  <cestrauss@gmail.com>

	PR ada/52123
	* seh_init.c (Raise_From_Signal_Handler): Declare as no-return.
	(__gnat_SEH_error_handler): Likewise.  Remove final return.

2013-03-06  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/trans.c (Attribute_to_gnu): Abort instead of erroring
	out for an unimplemented attribute.

2013-03-06  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/decl.c (gnat_to_gnu_field): Remove the wrapper around
	a misaligned integral type if a size is specified for the field.

2013-03-06  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/trans.c (Raise_Error_to_gnu) <CE_Index_Check_Failed>:
	Record the unpadded type of the index type on the RCI stack.

2013-03-06  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/trans.c (emit_range_check): Assert that the range type
	is a numerical type and remove useless local variables.

2013-02-25  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/ada-tree.h: Back out change accidentally committed.

2013-02-21  Jakub Jelinek  <jakub@redhat.com>

	PR bootstrap/56258
	* gnat-style.texi (@title): Remove @hfill.
	* projects.texi: Avoid line wrapping inside of @pxref or @xref.

2013-02-14  Rainer Emrich  <rainer@emrich-ebersheim.de>

	PR target/52123
	* tracebak.c: Cast from pointer via FARPROC.

2013-02-07  Simon Wright  <simon@pushface.org>

	PR target/50678
	* init.c (__darwin_major_version): New function for x86-64/Darwin.
	(__gnat_adjust_context_for_raise) [Darwin]: Disable the workaround
	on Darwin 12 and above.

2013-02-06  Rainer Emrich  <rainer@emrich-ebersheim.de>

	PR target/52123
	* adaint.c (__gnat_check_OWNER_ACL): Cast from pointer via
	SECURITY_DESCRIPTOR *
	(__gnat_set_OWNER_ACL): Cast from DWORD to ACCESS_MODE
	(__gnat_portable_spawn): Fix cast to char* const*
	(add_handle): Cast from pointer via void **
	(add_handle): Cast from pointer via int *
	(__gnat_locate_exec_on_path): Cast from pointer via TCHAR *
	(__gnat_locate_exec_on_path): Cast from pointer via char *
	* initialize.c (append_arg): Cast from pointer via LPWSTR
	(__gnat_initialize): Cast from pointer via LPWSTR
	* seh_init.c (__gnat_map_SEH): Cast from pointer via FARPROC

2013-02-06  Hristian Kirtchev  <kirtchev@adacore.com>

	* gcc-interface/Make-lang.in: Enable System.Stack_Checking.Operations
	target pairs on VxWorks 5 only.

2013-02-06  Arnaud Charlet  <charlet@adacore.com>

	* gcc-interface/Make-lang.in: Update dependencies.

2013-02-06  Vincent Celier  <celier@adacore.com>

	* prj-proc.adb (Process_Aggregated_Projects): Use a new project
	node tree for each project tree rooted at an aggregated project.

2013-02-06  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_util.adb (Is_Interface_Conversion): New routine.
	(Object_Access_Level): Detect an interface conversion
	that has been rewritten into a different construct. Use the
	original form of the conversion to find the access level of
	the operand.

2013-02-06  Eric Botcazou  <ebotcazou@adacore.com>

	* einfo.ads (Has_Pragma_No_Inline): New flag using Flag201.
	(Has_Pragma_No_Inline): Declare and mark as inline.
	(Set_Has_Pragma_No_Inline): Likewise.
	* einfo.adb (Has_Pragma_No_Inline): New function.
	(Set_Has_Pragma_No_Inline): New procedure.
	(Write_Entity_Flags): Handle Has_Pragma_No_Inline.
	* snames.ads-tmpl (Name_No_Inline): New pragma-related name.
	(Pragma_Id): Add Pragma_No_Inline value.
	* par-prag.adb (Prag): Handle Pragma_Inline.
	* sem_prag.adb (Inline_Status): New enumeration type.
	(Process_Inline): Change Active parameter
	to Inline_Status and add support for suppressed inlining.
	(Analyze_Pragma) <Pragma_Inline>: Adjust to above change.
	<Pragma_Inline_Always>: Likewise.
	 <Pragma_No_Inline>: Implement new pragma No_Inline.
	(Sig_Flags): Add Pragma_No_Inline.
	* gnat_rm.texi (Implementation Defined Pragmas): Add No_Inline.
	* gnat_ugn.texi (Switches for gcc): Mention Pragma No_Inline.

2013-02-06  Pascal Obry  <obry@adacore.com>

	* s-osprim-mingw.adb (Clock): Make sure we copy all data locally
	to avoid interleaved modifications that could happen from another
	task calling Get_Base_Data.
	(Get_Base_Data): Make it a critical section. Avoid updating if another
	task has already done it.

2013-02-06  Eric Botcazou  <ebotcazou@adacore.com>

	* sem_prag.adb: Minor reformatting.

2013-02-06  Pascal Obry  <obry@adacore.com>

	* s-tasloc.ads: Set System.Task_Lock to preelaborate.

2013-02-06  Eric Botcazou  <ebotcazou@adacore.com>

	* snames.ads-tmpl (Name_Loop_Optimize, Name_No_Unroll,
	Name_Unroll, Name_No_Vector, Name_Vector): New pragma-related
	names.
	(Pragma_Id): Add Pragma_Loop_Optimize value.
	* par-prag.adb (Prag): Handle Pragma_Loop_Optimize.
	* sem_prag.adb (Check_Loop_Invariant_Variant_Placement): Rename to...
	(Check_Loop_Pragma_Placement): ...this.
	(Analyze_Pragma)
	<Pragma_Loop_Invariant>: Adjust to above renaming.
	<Loop_Variant>: Likewise.
	 <Pragma_Loop_Optimize>: Implement new pragma Loop_Optimize.
	(Sig_Flags): Add Pragma_Loop_Optimize.
	* gnat_rm.texi (Implementation Defined Pragmas): Add Loop_Optimize.
	* gnat_ugn.texi (Vectorization of loops): Mention Loop_Optimize.

2013-02-06  Robert Dewar  <dewar@adacore.com>

	* osint.ads: Minor fix of typo.

2013-02-06  Sergey Rybin  <rybin@adacore.com frybin>

	* gnat_ugn.texi: gnatmetric: update the documentation of
	complexity metrics for Ada 2012.

2013-02-06  Javier Miranda  <miranda@adacore.com>

	* exp_disp.adb (Make_Secondary_DT): Code cleanup:
	remove useless initialization.

2013-02-06  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch3.adb (Build_Discriminant_Constraints): Do not
	generate overflow checks on a discriminant expression if the
	discriminant constraint is applied to a private type that has
	a full view, because the check will be applied when the full
	view is elaborated.  Removing the redundant check is not just
	an optimization, but it prevents spurious assembler errors,
	because of the way the backend generates names for expressions
	that require overflow checking.

2013-02-06  Pascal Obry  <obry@adacore.com>

	* s-osprim-mingw.adb: Removes workaround for an old GNU/Linker
	limitation on Windows.
	(DA): Removed.
	(LIA): Removed.
	(LLIA): Removed.
	(TFA): Removed.
	(BTA): Removed.
	(BMTA): Removed.
	(BCA): Removed.
	(BMCA): Removed.
	(BTiA): Removed.
	(Clock): Use variable corresponding to access.
	(Get_Base_Time): Likewise.
	(Monotonic_Clock): Likewise.

2013-02-06  Vincent Celier  <celier@adacore.com>

	* make.adb (Gnatmake): When gnatmake is called with a project
	file, do not invoke gnatbind with -I-.
	* makeutl.adb (Create_Binder_Mapping_File): Rewrite function. Get
	the infos from all the sources.

2013-02-06  Ed Schonberg  <schonberg@adacore.com>

	* snames.ads-tmpl: Add Name_Overriding_Renamings and pragma
	Overriding_Renamings.
	* par-prag.adb: Recognize pragma Overriding_Renamings.
	* opt.ads (Overriding_Renamings): flag to control compatibility
	mode with Rational compiler, replaces Rational_Profile flag.
	* sem_ch8.adb (Analyze_Subprogram_Renaming): When
	Overriding_Renamings is enabled, accept renaming declarations
	where the new subprogram renames and overrides a locally inherited
	operation. Improve error message for some illegal renamings.
	* sem_prag.adb (Analyze_Pragma): Add case for Overriding_Renamings.
	(Set_Rational_Profile): The Rational_Profile enables
	Overriding_Renamings, Implicit_Packing, and Use_Vads_Size.

2013-02-06  Ed Schonberg  <schonberg@adacore.com>

	* sem_util.adb: Set parent of copied aggregate component, to
	prevent infinite loop.

2013-02-06  Robert Dewar  <dewar@adacore.com>

	* sem_ch3.adb, sem_ch10.adb: Minor reformatting.
	* exp_disp.adb: Minor comment update.
	* comperr.ads, osint.ads, rtsfind.adb, sem_prag.adb: Minor addition of
	No_Return pragmas.

2013-02-06  Thomas Quinot  <quinot@adacore.com>

	* targparm.ads, sem_ch13.adb (Support_Nondefault_SSO): New target
	parameter, defaulted to False for now, indicates targets where
	non-default scalar storage order may be specified.

2013-02-06  Thomas Quinot  <quinot@adacore.com>

	* sprint.adb (Write_Itype): Treat E_Record_Subtype_With_Private
	same as E_Record_Subtype.  Display E_Class_Wide_Subtype as
	subtype, not type.

2013-02-06  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch3.adb (Complete_Private_Subtype): Inherit the
	Has_Unknown_Discriminants from the full view of the base type.

2013-02-06  Tristan Gingold  <gingold@adacore.com>

	* raise-gcc.c: Remove useless includes (sys/stat.h, adaint.h)
	Enclosing debugging functions within #ifndef inhibit_libc to
	support builds without full C headers.

2013-02-06  Thomas Quinot  <quinot@adacore.com>

	* gnat_rm.texi: Add a minimal example of Scalar_Storage_Order.

2013-02-06  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch10.adb (Install_Limited_Withed_Unit): Add a missing
	check to detect a parent-child relationship between two units in
	order to correctly bypass the installation of a limited view. In
	other words, the comment on the intended usage of the check was
	correct, but the code itself did not reflect the behavior.

2013-02-06  Javier Miranda  <miranda@adacore.com>

	* exp_ch5.adb (Expand_N_Assignment_Statement): Do not generate the
	runtime check on assignment to tagged types if compiling with checks
	suppressed.

2013-02-06  Robert Dewar  <dewar@adacore.com>

	* exp_util.adb, checks.adb, sem_ch12.adb, sem_res.adb, prj-conf.adb,
	s-os_lib.adb: Minor reformatting

2013-02-06  Vincent Celier  <celier@adacore.com>

	* ug_words: Add -gnateY = /IGNORE_STYLE_CHECKS_PRAGMAS.

2013-02-06  Ed Schonberg  <schonberg@adacore.com>

	* snames.ads-tmpl: Add Name_Rational and pragma Rational.
	* par-prag.adb: Recognize pragma Rational.
	* opt.ads (Rational_Profile): flag to control compatibility mode
	with Rational compiler.
	* sem_ch8.adb (Analyze_Subprogram_Renaming): When Rational profile
	is enable, accept renaming declarations where the new subprogram
	and the renamed entity have the same name.
	* sem_prag.adb (analyze_pragma): Add pragma Rational, and recognize
	Rational as a profile.

2013-02-06  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch5.adb (Expand_Loop_Entry_Attributes): When
	dealing with a for loop that iterates over a subtype indication
	with a range, use the low and high bounds of the subtype.

2013-02-06  Nicolas Roche  <roche@adacore.com>

	* s-os_lib.adb (Normalize_Arguments): Arguments containing tabs should
	be quoted

2013-02-06  Vincent Celier  <celier@adacore.com>

	* prj-conf.adb (Process_Project_And_Apply_Config): New variable
	Conf_Project.  New recursive procedure Check_Project to find a non
	aggregate project and put its Project_Id in Conf_Project. Fails if
	no such project can be found.
	(Get_Or_Create_Configuration_File): New parameter Conf_Project.
	 (Do_Autoconf): Use project directory of project Conf_Project to store
	the generated configuration project file.
	* prj-conf.ads (Get_Or_Create_Configuration_File): New parameter
	Conf_Project.

2013-02-06  Javier Miranda  <miranda@adacore.com>

	* sem_res.adb (Resolve_Actuals): Generate a read
	reference for out-mode parameters in the cases specified by
	RM 6.4.1(12).

2013-02-06  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_attr.adb (Resolve_Attribute): Do not resolve the prefix of
	Loop_Entry, instead wait until the attribute has been expanded. The
	delay ensures that any generated checks or temporaries are inserted
	before the relocated prefix.

2013-02-06  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch12.adb: Code clean up.

2013-02-06  Ed Schonberg  <schonberg@adacore.com>

	* checks.adb (Apply_Discriminant_Check): Look for discriminant
	constraint in full view of private type when needed.
	* sem_ch12.adb (Validate_Array_Type_Instance): Specialize
	previous patch to components types that are private and without
	discriminants.

2013-02-06  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch4.adb (Find_Enclosing_Context): Recognize
	a simple return statement as one of the cases that require special
	processing with respect to temporary controlled function results.
	(Process_Transient_Object): Do attempt to finalize a temporary
	controlled function result when the associated context is
	a simple return statement.  Instead, leave this task to the
	general finalization mechanism.

2013-02-06  Thomas Quinot  <quinot@adacore.com>

	* einfo.ads: Minor reformatting.
	(Status_Flag_Or_Transient_Decl): Add ??? comment.

2013-02-06  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch4.adb (Expand_N_Expression_With_Actions): Rewritten. This
	routine should be able to properly detect controlled transient
	objects in its actions and generate the appropriate finalization
	actions.
	* exp_ch6.adb (Enclosing_Context): Removed.
	(Expand_Ctrl_Function_Call): Remove local subprogram and
	constant. Use routine Within_Case_Or_If_Expression to determine
	whether the lifetime of the function result must be extended to
	match that of the context.
	* exp_util.ads, exp_util.adb (Within_Case_Or_If_Expression): New
	routine.

2013-02-06  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch12.adb (Validate_Array_Type_Instance): Extend check
	for subtype matching of component type of formal array type,
	to avoid spurious error when component type is a separate actual
	in the instance, and there may be a discrepancy between private
	and full view of component type.

2013-02-06  Robert Dewar  <dewar@adacore.com>

	* s-dim.ads, clean.adb: Minor reformatting.

2013-02-06  Javier Miranda  <miranda@adacore.com>

	* sem_ch6.adb (Analyze_Subprogram_Body_Helper): Undo previous patch.
	(Can_Split_Unconstrained_Function): Only split the inlined function if
	the compiler generates the code of its body.

2013-02-06  Robert Dewar  <dewar@adacore.com>

	* exp_prag.adb, sem_ch3.adb, exp_attr.adb, sem_prag.adb, sem_ch6.adb,
	exp_intr.adb, exp_dist.adb, sem_ch13.adb: Internal clean up for
	N_Pragma nodes.

2013-02-06  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Minor text updates for pragma Warning.

2013-02-06  Geert Bosch  <bosch@adacore.com>

	* s-multip.adb (Number_Of_CPUs): Short-circuit in case of
	CPU'Last = 1.

2013-02-06  Vincent Celier  <celier@adacore.com>

	* clean.adb (Delete): On VMS use host notation to delete all files.

2013-02-06  Robert Dewar  <dewar@adacore.com>

	* sem_prag.adb, sem_ch6.adb, prj-conf.adb, erroutc.adb: Minor
	reformatting.

2013-02-06  Gary Dismukes  <dismukes@adacore.com>

	* sem_ch6.adb (Check_For_Primitive_Subprogram): Test for
	the special case of a user-defined equality that overrides
	the predefined equality of a nonderived type declared in a
	declarative part.
	* sem_util.adb (Collect_Primitive_Operations): Add test for
	Is_Primitive when looping over the subprograms following a type,
	to catch the case of primitives such as a user-defined equality,
	which otherwise won't be found when the type is not a derived
	type and is declared in a declarative part.

2013-02-06  Vincent Celier  <celier@adacore.com>

	* prj-conf.adb (Check_Target): Always return True when Target
	is empty (Get_Or_Create_Configuration_File.Get_Project_Target):
	New procedure to get the value of attribute Target in the main
	project.
	(Get_Or_Create_Configuration_File.Do_Autoconf): No
	need to get the value of attribute Target in the main project.
	(Get_Or_Create_Configuration_File): Call Get_Project_Target and
	use the target fom this call.

2013-02-06  Eric Botcazou  <ebotcazou@adacore.com>

	* erroutc.adb (Validate_Specific_Warning): Do not issue the
	warning about an ineffective Pragma Warnings for -Wxxx warnings.
	* sem_prag.adb (Analyze_Pragma) <Warnings>: Accept -Wxxx warnings.
	* gnat_rm.texi (Pragma Warnings): Document coordination with
	warnings of the GCC back-end.

2013-02-06  Javier Miranda  <miranda@adacore.com>

	* sem_ch6.adb (Analyze_Subprogram_Body_Helper): Do not build the body
	of an inlined function if we do not generate code for the function.

2013-02-06  Pascal Obry  <obry@adacore.com>

	* s-os_lib.adb (Locate_Exec_On_Path): Call Normalize_Pathname
	with Resolve_Links set to False.

2013-02-03  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/decl.c: Include diagnostic-core.h.
	(gnat_to_gnu_entity) <E_Array_Type>: Sorry if Reverse_Storage_Order
	is set on the entity.
	<E_Record_Type>: Likewise.
	* gcc-interface/Make-lang.in (ada/decl.o): Add $(DIAGNOSTIC_CORE_H).

2013-01-29  Ben Brosgol  <brosgol@adacore.com>

	* gnat_rm.texi: Fixed typos. Minor edits.

2013-01-29  Bob Duff  <duff@adacore.com>

	* a-convec.adb: Minor reformatting.

2013-01-29  Pascal Obry  <obry@adacore.com>

	* tempdir.adb, tempdir.ads (Use_Temp_Dir): Set wether to use the temp
	directory.

2013-01-29  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch5.adb (Expand_Iterator_Loop_Over_Array): Preserve loop
	identifier only if it comes from source.
	(Expand_N_Loop_Statement): If the domain of iteration is an
	enumeration type with a representation clause, remove from
	visibility the loop identifier before rewriting the loop as a
	block with a declaration for said identifier.
	* sem_util.adb (Remove_Homonym): Handle properly the default case.

2013-01-29  Vincent Celier  <celier@adacore.com>

	* prj-proc.adb: Minor comment spelling fix.

2013-01-29  Pascal Obry  <obry@adacore.com>

	* prj-proc.adb (Process_Expression_Variable_Decl): Prepend
	Project_Path to current environment.

2013-01-29  Thomas Quinot  <quinot@adacore.com>

	* sprint.adb (Sprint_Node_Actual): Output freeze nodes for
	itypes even if Dump_Freeze_Null is not set.

2013-01-29  Robert Dewar  <dewar@adacore.com>

	* sem_util.adb: Minor reformatting.
	* s-rident.ads: Minor comment fixes.

2013-01-29  Pascal Obry  <obry@adacore.com>

	* prj-env.ads, prj-env.adb (Add_Directories): Add parameter to
	control if the path is prepended or appended.

2013-01-29  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch6.adb (Analyze_Expression_Function): An expression
	function declaration is not a subprogram declaration, and thus
	cannot appear in a protected definition.

2013-01-29  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_util.adb (Insert_Actions): When new
	actions come from the expression of the expression with actions,
	then they must be added to the list of existing actions.

2013-01-29  Eric Botcazou  <ebotcazou@adacore.com>

	* sem_ch3.adb (Analyze_Subtype_Declaration) <Private_Kind>: For
	the subtype of a constrained private type with discriminants
	that has got a full view, show that the completion is a clone
	of the full view.

2013-01-29  Javier Miranda  <miranda@adacore.com>

	* errout.ads, errout.adb (Get_Ignore_Errors): New subprogram.
	* opt.ads (Warn_On_Overlap): Update documentation.
	* sem_aggr.adb (Resolve_Aggregate, Resolve_Extension_Aggregate):
	Check function writable actuals.
	* sem_ch3.adb (Build_Derived_Record_Type,
	Record_Type_Declaration): Check function writable actuals.
	* sem_ch4.adb (Analyze_Range): Check function writable actuals.
	* sem_ch5.adb (Analyze_Assignment): Remove code of the initial
	implementation of AI05-0144.
	* sem_ch6.adb (Analyze_Function_Return,
	(Analyze_Procedure_Call.Analyze_Call_And_Resolve): Remove code
	of the initial implementation of AI05-0144.
	* sem_res.adb (Resolve): Remove code of the initial implementation.
	(Resolve_Actuals): Call Check_Function_Writable_Actuals and remove call
	of the initial implementation.
	(Resolve_Arithmetic_Op, Resolve_Logical_Op,
	Resolve_Membership_Op): Check function writable actuals.
	* sem_util.ad[sb] (Actuals_In_Call): Removed
	(Check_Order_Dependence): Removed (Save_Actual): Removed
	(Check_Function_Writable_Actuals): New subprogram.
	* usage.adb (Usage): Update documentation.
	* warnsw.adb (Set_Warning_Switch): Enable warn_on_overlap when
	setting all warnings.

2013-01-29  Robert Dewar  <dewar@adacore.com>

	* a-calend-vms.adb: Minor comment fix.

2013-01-29  Robert Dewar  <dewar@adacore.com>

	* mlib-utl.adb, gnatlink.adb: Avoid reference to ASCII.Back_Slash
	because of casing issues.
	* sem_util.ads: Minor comment fix.
	* style.adb (Check_Identifier): Set proper casing for entities
	in ASCII.
	* styleg.adb: Minor comment improvement.
	* stylesw.ads (Style_Check_Standard): Fix bad comments.

2013-01-29  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb: Add the grammar for pragmas Abstract_State and Global.
	(Analyze_Pragma): Push the scope of the related subprogram and install
	its formals once before starting the analysis of the [moded] global
	list.

2013-01-29  Pascal Obry  <obry@adacore.com>

	* prj-proc.adb (Process_Expression_Variable_Decl): Always handle
	relative paths in Project_Path as relative to the aggregate
	project location. Note that this was what was documented.

2013-01-29  Vincent Celier  <celier@adacore.com>

	* gnatcmd.adb: For "gnat stub -P ...", do not check the naming
	scheme for Ada, when Ada is not a language for the project.

2013-01-29  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch3.adb (Analyze_Subtype_Declaration): Inherit
	Is_Generic_Actual_Type flag in a nested instance.
	* sem_ch12.adb (Restore_Private_Views): Preserve
	Is_Generic_Actual_Type flag if actual is a Generic_Actual_Type
	of an enclosing instance.
	* sem_util.adb (Corresponding_Generic_Type): Handle generic actual
	which is an actual of an enclosing instance.
	* sem_type.adb (Real_Actual): If a generic_actual_type is the
	formal of an enclosing generic and thus renames the corresponding
	actual, use the actual of the enclosing instance to resolve
	spurious ambiguities in instantiations when two formals are
	instantiated with the same actual.

2013-01-29  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Document all Ada 2005 and Ada 2012 pragmas as
	being available as implementation-defined pragmas in earlier
	versions of Ada.

2013-01-29  Vincent Celier  <celier@adacore.com>

	* clean.adb (Delete): On VMS, delete all versions of the file.

2013-01-29  Robert Dewar  <dewar@adacore.com>

	* par-ch6.adb (No_Constraint_Maybe_Expr_Func): New procedure.
	* par-util.adb (No_Constraint): Undo special handling, moved
	to par-ch6.adb.

2013-01-29  Robert Dewar  <dewar@adacore.com>

	* aspects.ads: Aspect Warnings is implementation defined Add
	some other missing entries to impl-defined list Mark Warnings
	as GNAT pragma in main list.
	* sem_ch8.adb: Process aspects for all cases of renaming
	declarations.

2013-01-29  Robert Dewar  <dewar@adacore.com>

	* sem_ch6.adb (Analyze_Function_Call): Set In_Assertion flag.
	* sem_elab.adb (Check_Internal_Call_Continue): Do not issue
	warnings about possible elaboration error if call is within
	an assertion.
	* sinfo.ads, sinfo.adb (In_Assertion): New flag in N_Function_Call node.

2013-01-29  Robert Dewar  <dewar@adacore.com>

	* a-calend-vms.adb, g-eacodu-vms.adb, g-trasym-vms-alpha.adb,
	* s-auxdec-vms-ia64.adb, s-mastop-vms.adb, s-osprim-vms.adb,
	s-tasdeb-vms.adb: Replace pragma Interface by pragma Import.

2013-01-29  Robert Dewar  <dewar@adacore.com>

	* opt.ads (Ignore_Style_Checks_Pragmas): New flag.
	* par-prag.adb (Par, case Style_Checks): Recognize
	Ignore_Style_Checks_Pragmas.
	* sem_prag.adb (Analyze_Pragma, case Style_Checks): Recognize
	Ignore_Style_Checks_Pragmas.
	* switch-c.adb: Recognize -gnateY switch.
	* usage.adb: Add documentation for "-gnateY".
	* vms_data.ads: Add IGNORE_STYLE_CHECKS_PRAGMAS (-gnateY).

2013-01-29  Vincent Celier  <celier@adacore.com>

	* clean.adb (Clean_Executables): Add Sid component when calling
	Queue.Insert.
	* make.adb: When inserting in the Queue, add the Source_Id
	(Sid) when it is known (Start_Compile_If_Possible): When the
	Source_Id is known (Sid), get the path name of the ALI file
	(Full_Lib_File) from it, to avoid finding old ALI files in other
	object directories.
	* makeutl.ads (Source_Info): New Source_Id component Sid in
	Format_Gnatmake variant.

2013-01-29  Robert Dewar  <dewar@adacore.com>

	* gnat_ugn.texi: Document -gnateY.

2013-01-29  Doug Rupp  <rupp@adacore.com>

	* s-osinte-vms.ads, s-taprop-vms.adb, system-vms_64.ads,
	system-vms-ia64.ads: Replace pragma Interface by pragma Import.

2013-01-29  Robert Dewar  <dewar@adacore.com>

	* atree.ads, atree.adb (Node30): New function.
	(Set_Node30): New procedure.
	(Num_Extension_Nodes): Change to 5 (activate new fields/flags).
	* atree.h: Add macros for Field30 and Node30.
	* einfo.ads, einfo.adb: Move some fields to avoid duplexing.
	* treepr.adb (Print_Entity_Information): Print fields 30-35.

2013-01-29  Robert Dewar  <dewar@adacore.com>

	* sem_prag.adb (Analyze_Pragma, case Interface): Consider to
	be a violation of No_Obsolescent_Features even in Ada 95. Also
	generates a warning in -gnatwj mode.
	(Analyze_Pragma, case Interface_Name): Generates a warning in -gnatwj
	mode.
	* gnat_ugn.texi: Additional documentation on -gnatwj and pragma
	Interface[_Name].

2013-01-29  Vincent Celier  <celier@adacore.com>

	* snames.ads-tmpl: Add new standard name Trailing_Switches.

2013-01-29  Ed Schonberg  <schonberg@adacore.com>

	* sem_disp.adb (Check_Controlling_Type): If a designated type T
	of an anonymous access type is a limited view of a tagged type,
	it can be a controlling type only if the subprogram is in the
	same scope as T.

2013-01-29  Vincent Celier  <celier@adacore.com>

	* gnatcmd.adb: Use the project where the config pragmas file is
	declared to get its path.

2013-01-29  Vincent Celier  <celier@adacore.com>

	* prj-attr.adb: New attribute Linker'Trailing_Switches.

2013-01-22  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/trans.c (gnat_to_gnu) <N_Expression_With_Actions>: Do
	not translate the Etype of the node before translating the Actions.

2013-01-22  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/trans.c (Pragma_to_gnu) <Name_Space>: Use optimize_size
	instead of optimize and adjust warning message.
	(Compilation_Unit_to_gnu): Process pragmas preceding the unit.

2013-01-22  Tristan Gingold  <gingold@adacore.com>

	* gcc-interface/gigi.h (ADT_unhandled_except_decl,
	ADT_unhandled_others_decl): New.
	(unhandled_others_decl, unhandled_except_decl): Define.
	* gcc-interface/trans.c: Include common/common-target.h.
	(gigi): Initialize them.
	(Subprogram_Body_to_gnu): On SEH targets, wrap the body of the main
	function in a try/catch clause.

2013-01-11  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/Make-lang.in (COMMON_ADAFLAGS): Remove -gnata.
	(CHECKING_ADAFLAGS): New.
	(ALL_ADAFLAGS): Include CHECKING_ADAFLAGS.

2013-01-10  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/config-lang.in (boot_language_boot_flags): Delete.
	* gcc-interface/Make-lang.in (BOOT_ADAFLAGS): Likewise.

2013-01-07  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/decl.c (gnat_to_gnu_entity) <E_Record_Type>: Adjust
	comment about type extension with discriminants.
	<E_Record_Subtype>: Remove useless test and reorder conditions.
	(elaborate_entity) <E_Record_Subtype>: Likewise.

2013-01-07  Richard Biener  <rguenther@suse.de>

	PR ada/864
	* gcc-interface/Make-lang.in (ada.install-common): Always apply
	program_transform_name.

2013-01-06  Eric Botcazou  <ebotcazou@adacore.com>

	* gnatvsn.ads (Current_Year): Bump to 2013.

2013-01-06  Olivier Hainque  <hainque@adacore.com>

	* gcc-interface/decl.c (gnat_to_gnu_field): Emit a specialized
	diagnostic for component size mismatch wrt volatile requirements.
	Add a gcc_unreachable() at the end of the checks for size.  Split
	the check on volatile for positions into one check on atomic and
	a subsequent one on volatile.

2013-01-06  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/decl.c (elaborate_entity) <E_Record_Type>: Delete.

2013-01-06  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/decl.c (gnat_to_gnu_entity) <discrete_type>: Do not
	pack the field of the record type made for a misaligned type.

2013-01-06  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/decl.c (annotate_value) <COMPONENT_REF>: Be prepared
	for discriminants inherited from parent record types.

2013-01-04  Robert Dewar  <dewar@adacore.com>

	* warnsw.adb: Minor fixes to -gnatw.d handling.

2013-01-04  Robert Dewar  <dewar@adacore.com>

	* einfo.adb, atree.adb: Enlarge entities to make 63 more flags, 6 more
	fields.

2013-01-04  Joel Brobecker  <brobecker@adacore.com>

	* gnat_ugn.texi: Fix typo.

2013-01-04  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Document alignment choice for subtypes.

2013-01-04  Robert Dewar  <dewar@adacore.com>

	* validsw.ads: Minor fix to comment.

2013-01-04  Doug Rupp  <rupp@adacore.com>

	* Makefile.rtl (GNATRTL_NONTASKING_OBJS,
	GNATRTL_ALTIVEC_OBJS): Factor g-al* objects.
	* gcc-interface/Makefile.in (ADA_EXCLUDE_SRCS): Add g-al* sources.
	(GNATRTL_ALTIVEC_OBJS): Override to null for VMS.
	Rename leon vxworks toolchain as leon-wrs-vxworks.
	* gcc-interface/Make-lang.in: Update dependencies

2013-01-04  Pascal Obry  <obry@adacore.com>

	* prj.ads (For_Each_Source): Add Locally_Removed parameter.
	(Source_Iterator): Add Locally_Removed field.
	* prj.adb (For_Each_Source): Ignore Locally_Removed files if needed.
	(Next): Likewise.

2013-01-04  Robert Dewar  <dewar@adacore.com>

	* exp_attr.adb: Minor reformatting.

2013-01-04  Robert Dewar  <dewar@adacore.com>

	* checks.adb (Insert_Valid_Check): Fix handling of renamed
	packed array element.
	* exp_ch4.adb (Expand_Concatenate): Fix some missing parent
	fields in generated code.
	* exp_util.adb (Side_Effect_Free): Improve detection of cases
	needing renaming.

2013-01-04  Robert Dewar  <dewar@adacore.com>

	* sinfo.ads: Clean up order of N_xxx subtypes

2013-01-04  Vincent Celier  <celier@adacore.com>

	* prj-conf.adb (Check_Target): Allow --autoconf= with no target.

2013-01-04  Robert Dewar  <dewar@adacore.com>

	* types.ads, prj-conf.adb, par-tchk.adb: Minor reformatting.

2013-01-04  Robert Dewar  <dewar@adacore.com>

	* par-ch6.adb (P_Subprogram): Better handling of missing IS
	after expression function.
	* par-util.adb (No_Constraint): Improve handling to avoid bad warnings.

2013-01-04  Robert Dewar  <dewar@adacore.com>

	* exp_util.ads, exp_util.adb (Insert_Actions): In expression with
	actions case, new actions are appended to the sequence rather than
	prepended.

2013-01-04  Robert Dewar  <dewar@adacore.com>

	* gnat_ugn.texi: Document -gnatw.d/w.D (does no apply in VMS mode).
	* usage.adb: Add lines for -gnatw.d/w.D switches.
	* warnsw.adb: Minor fixes (some missing cases of setting
	Warning_Doc_Switch). Reject -gnatw.d and -gnatw.D in VMS mode.

2013-01-04  Robert Dewar  <dewar@adacore.com>

	* exp_util.adb (Remove_Side_Effects): Make sure scope suppress
	is restored on exit.

2013-01-04  Robert Dewar  <dewar@adacore.com>

	* usage.adb: Document -gnateF (check overflow for predefined Float).

2013-01-04  Robert Dewar  <dewar@adacore.com>

	* sem_res.adb (Resolve_Type_Conversion): Remove incorrect
	prevention of call to Apply_Type_Conversion_Checks, which resulted
	in missing check flags in formal mode.

2013-01-04  Vincent Celier  <celier@adacore.com>

	* makeutl.ads (Db_Switch_Args): New table used by gprbuild.
	* prj-conf.adb (Check_Builder_Switches): Check for switches
	--config= (Get_Db_Switches): New procedure to get the --db
	switches so that they are used when invoking gprconfig in
	auto-configuration.
	(Do_Autoconf): When invoking gprconfig, use the --db switches, if any.

2013-01-04  Pascal Obry  <obry@adacore.com>

	* prj-nmsc.adb: Minor reformatting.

2013-01-04  Vincent Celier  <celier@adacore.com>

	* makeutl.ads (Root_Environment): New variable, moved rom
	gprbuild (Load_Standard_Base): New Boolean variable, moved
	from gprbuild.
	* prj-conf.adb (Check_Builder_Switches): New procedure to check
	for switch --RTS in package Builder. If a runtime specified
	by --RTS is a relative path name, but not a base name, then
	find the path on the Project Search Path.
	(Do_Autoconf): Call Check_Builder_Switches.
	(Locate_Runtime): New procedure, moved from gprbuild, to get the
	absolute paths of runtimes when they are not specified as a base name.
	* prj-conf.ads (Locate_Runtime): New procedure, moved from gprbuild.

2013-01-04  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch3.adb (Build_Private_Derived_Type): Set
	Has_Private_Ancestor on type derived from an untagged private
	type whose full view has discriminants
	* sem_aggr.adb (Resolve_Record_Aggregate): Reject non-extension
	aggregate for untagged record type with private ancestor.

2013-01-04  Thomas Quinot  <quinot@adacore.com>

	* sem_elab.adb, sem_ch3.adb: Minor reformatting.

2013-01-04  Robert Dewar  <dewar@adacore.com>

	* table.adb: Minor reformatting.

2013-01-04  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch10.adb (Check_Redundant_Withs): A with_clause that does
	not come from source does not generate a warning for redundant
	with_clauses.

2013-01-04  Hristian Kirtchev  <kirtchev@adacore.com>

	* aspects.adb, aspects.ads: Add Aspect_Global to all relevant tables.
	* par-prag.adb: Add pragma Global to the list of pragmas that
	do not need special processing by the parser.
	* sem_ch13.adb (Analyze_Aspect_Specifications): Convert aspect
	Global into a pragma without any form of legality checks. The
	work is done by Analyze_Pragma. The aspect and pragma are both
	marked as needing delayed processing.  Insert the corresponding
	pragma of aspect Abstract_State in the visible declarations of the
	related package.
	(Check_Aspect_At_Freeze_Point): Aspect Global
	does not need processing even though it is marked as delayed.
	Alphabetize the list on aspect names.
	* sem_prag.adb: Add a value for pragma Global in table Sig_Flags.
	(Analyze_Pragma): Add ??? comment about the grammar of pragma
	Abstract_State.  Move the error location from the pragma to the
	state to improve the quality of error placement.  Add legality
	checks for pragma Global.
	* snames.ads-tmpl Add the following specially recognized names

2013-01-04  Eric Botcazou  <ebotcazou@adacore.com>

	* sem_ch3.adb: Fix minor typo.

2013-01-04  Ed Schonberg  <schonberg@adacore.com>

	* par-ch13.adb (Aspect_Specifications_Present): In Strict mode,
	accept an aspect name followed by a comma, indicating a defaulted
	boolean aspect.

2013-01-04  Joel Brobecker  <brobecker@adacore.com brobecker>

	* gnat_ugn.texi: Document procedure to codesign GDB on Darwin.
	Update doc on gnattest --separates switch.

2013-01-04  Thomas Quinot  <quinot@adacore.com>

	* s-chepoo.ads: Minor reformatting.

2013-01-04  Arnaud Charlet  <charlet@adacore.com>

	* usage.adb: Remove mention of -gnatN in usage.

2013-01-04  Robert Dewar  <dewar@adacore.com>

	* exp_prag.adb, gnatcmd.adb, exp_util.adb, table.adb, sem_prag.adb,
	freeze.adb, sem_ch4.adb, sem_warn.adb, opt.ads, exp_aggr.adb,
	prj-conf.adb, sem_ch13.adb: Minor reformatting.

2013-01-04  Thomas Quinot  <quinot@adacore.com>

	* sinfo.ads: Minor documentation update.

2013-01-04  Thomas Quinot  <quinot@adacore.com>

	* sem_ch3.adb, einfo.adb (Analyze_Object_Declaration): Do not set Ekind
	before resolving initialization expression.

2013-01-04  Hristian Kirtchev  <kirtchev@adacore.com>

	* checks.adb (Generate_Index_Checks): Delay the generation of
	the check for an indexed component where the prefix mentions
	Loop_Entry until the attribute has been properly expanded.
	* exp_ch5.adb (Expand_Loop_Entry_Attributes): Perform minor
	decoration of the constant that captures the value of Loop_Entry's
	prefix at the entry point into a loop.	Generate index checks
	for an attribute reference that has been transformed into an
	indexed component.

2013-01-04  Thomas Quinot  <quinot@adacore.com>

	* exp_prag.adb, exp_util.adb, exp_util.ads, freeze.adb, exp_aggr.adb,
	sem_ch13.adb (Exp_Aggr.Collect_Initialization_Statements): Nothing to
	do if Obj is already frozen.
	(Exp_Util.Find_Init_Call): Rename to...
	(Exp_Util.Remove_Init_Call): New subprogram, renamed from
	Find_Init_Call.  Remove the initialization call from the enclosing
	list if found, and if it is from an Initialization_Statements
	attribute, reset it.
	(Exp_Util.Append_Freeze_Action): Minor code reorganization.
	(Exp_Util.Append_Freeze_Actions): Ensure a freeze node has been
	allocated (as is already done in Append_Freeze_Action).
	(Freeze.Freeze_Entity): For an object with captured
	Initialization_Statements and non-delayed freezeing, unwrap the
	initialization statements and insert and them directly in the
	enclosing list.
	(Sem_Ch13.Check_Address_Clause): For an object
	with Initialization_Statements and an address clause, unwrap the
	initialization statements when moving them to the freeze actions.

2013-01-03  Pascal Obry  <obry@adacore.com>

	* prj-attr.adb, projects.texi, snames.ads-tmpl: Add package remote and
	corresponding attibutes.

2013-01-03  Thomas Quinot  <quinot@adacore.com>

	* exp_aggr.adb: Minor comment improvement.

2013-01-03  Hristian Kirtchev  <kirtchev@adacore.com>

	* aspects.adb, aspects.ads: Add Aspect_Abstract_State to all the
	relevant tables.
	* einfo.ads, einfo.adb: Add Integrity_Level and Refined_State to
	the description of fields (Abstract_States): New routine.
	(Integrity_Level): New routine.
	(Has_Property): New routine.
	(Is_Input_State): New routine.
	(Is_Null_State): New routine.
	(Is_Output_State): New routine.
	(Is_Volatile_State): New routine.
	(Refined_State): New routine.
	(Set_Abstract_States): New routine.
	(Set_Integrity_Level): New routine.
	(Set_Refined_State): New routine.
	(Write_Field8_Name): Add proper output for E_Abstract_State.
	(Write_Field9_Name): Add proper output for E_Abstract_State.
	(Write_Field25_Name): Add proper output for E_Package.
	* lib-xref.ads: Add new letter for an abstract state.
	* par-prag.adb: Add pragma Abstract_State to the list of pragma
	that do not need special processing by the parser.
	* sem_ch13.adb (Analyze_Aspect_Specifications): Convert
	aspect Abstract_State into a pragma without any form
	of legality checks. The work is done by Analyze_Pragma.
	(Check_Aspect_At_Freeze_Point): Aspect Abstract_State does not
	require delayed analysis.
	* sem_prag.adb: Add a value for pragma Abstract_State in table
	Sig_Flags.
	(Analyze_Pragma): Add legality checks for pragma
	Abstract_State. Analysis of individual states introduces a state
	abstraction entity into the visibility chain.
	* snames.ads-tmpl: Add new names for abstract state and
	integrity. Add new pragma id for abstract state.

2013-01-03  Bob Duff  <duff@adacore.com>

	* table.adb (Reallocate): Calculate new Length in
	Long_Integer to avoid overflow.

2013-01-03  Thomas Quinot  <quinot@adacore.com>

	* sem_ch3.adb, sinfo.ads, freeze.adb, sem_ch4.adb, exp_aggr.adb
	(Sem_Ch3.Analyze_Object_Declaration): Set Ekind early so that
	it is set properly when expanding the initialization expression.
	(Freeze.Check_Address_Clause): Transfer initialization expression
	to an assignment in the freeze actions, so that the object is
	initialized only after being elaborated by GIGI.
	(Sinfo (comments), Sem_Ch4.Analyze_Expression_With_Actions): Allow
	a Null_Statement as the expression in an Expression_With_Actions.
	(Exp_Aggr.Collect_Initialization_Statements): New subprogram
	shared by expansion of record and array aggregates, used to
	capture statements for an aggregate used to initalize an object
	into an Expression_With_Actions (which acts as a container for
	a list of actions).
	(Exp_Aggr.Convert_Aggr_In_Obj_Decl): Use the above to
	capture initialization statements, instead of the previously
	existing loop which left freeze nodes out of the capturing
	construct (causing out of order elaboration crashes in GIGI).
	(Exp_Aggr.Expand_Array_Aggregate):  Use the above to capture
	initialization statements (this was previously not done for
	arrays).  Also do not unconditionally prevent in place expansion
	for an object with address clause.

2013-01-03  Thomas Quinot  <quinot@adacore.com>

	* gnat_rm.texi, freeze.adb (Check_Component_Storage_Order): Check that
	a record extension has the same scalar storage order as the parent type.

2013-01-03  Thomas Quinot  <quinot@adacore.com>

	* exp_ch4.adb: Add comment.

2013-01-03  Vincent Celier  <celier@adacore.com>

	* prj.adb: Minor spelling error correction in comment.

2013-01-03  Vincent Celier  <celier@adacore.com>

	* gnatcmd.adb (GNATCmd): If a single main has been specified
	as an absolute path, use its simple file name to find specific
	switches, instead of the absolute path.

2013-01-03  Javier Miranda  <miranda@adacore.com>

	* sem_warn.adb (Warn_On_Overlapping_Actuals): For overlapping
	parameters that are record types or array types generate warnings
	only compiling under -gnatw.i
	* opt.ads (Extensions_Allowed): Restore previous documentation.

2013-01-03  Vincent Celier  <celier@adacore.com>

	* prj-conf.adb (Do_Autoconf): If Target is specified in the
	main project, but not on the command line, use the Target in
	the project to invoke gprconfig in auto-configuration.
	* makeutl.ads (Default_Config_Name): New constant String.

2013-01-03  Arnaud Charlet  <charlet@adacore.com>

	* usage.adb: Minor: fix typo in usage.

2013-01-03  Thomas Quinot  <quinot@adacore.com>

	* sem_ch13.adb (Analyze_Record_Representation_Clause): Reject
	an illegal component clause for an inherited component in a
	record extension.

2013-01-03  Emmanuel Briot  <briot@adacore.com>

	* xref_lib.adb (Parse_Identifier_Info): Fix handling of arrays, which
	have information in the ALI file for both the index and the component
	types.

2013-01-03  Emmanuel Briot  <briot@adacore.com>

	* projects.texi: Fix error in documenting the project path
	computed for an aggregate project.

2013-01-03  Javier Miranda  <miranda@adacore.com>

	* sem_warn.adb (Warn_On_Overlapping_Actuals): Adding documentation
	plus restricting the functionality of this routine to cover the
	cases described in the Ada 2012 reference manual. The previous
	extended support is now available under -gnatX.
	* s-tassta.adb (Finalize_Global_Tasks): Addition of a dummy
	variable to call Timed_Sleep.  Required to avoid warning on
	overlapping out-mode actuals.
	* opt.ads (Extensions_Allowed): Update documentation.

2013-01-03  Tristan Gingold  <gingold@adacore.com>

	* s-arit64.ads: Use Multiply_With_Ovflo_Check as __gnat_mulv64.
	* arit64.c: Removed
	* gcc-interface/Makefile.in: Remove reference to arit64.c.

2013-01-03  Thomas Quinot  <quinot@adacore.com>

	* checks.adb, checks.ads (Apply_Address_Clause_Check): The check must
	be generated at the start of the freeze actions for the entity, not
	before (or after) the freeze node.

2013-01-03  Thomas Quinot  <quinot@adacore.com>

	* exp_aggr.adb (Exp_Aggr.Convert_Aggregate_In_Obj_Decl):
	Reorganize code to capture initialization statements in a block,
	so that freeze nodes are excluded from the captured block.

2013-01-03  Thomas Quinot  <quinot@adacore.com>

	* exp_ch11.adb: Minor reformatting.

2013-01-03  Thomas Quinot  <quinot@adacore.com>

	* exp_util.adb, einfo.adb, einfo.ads, freeze.adb, exp_aggr.adb,
	sem_ch13.adb (Einfo.Initialization_Statements,
	Einfo.Set_Initialization_Statements): New entity attribute
	for objects.
	(Exp_Util.Find_Init_Call): Handle case of an object initialized
	by an aggregate converted to a block of assignment statements.
	(Freeze.Check_Address_Clause): Do not clear Has_Delayed_Freeze
	even for objects that require a constant address, because the
	address expression might involve entities that have yet to be
	elaborated at the point of the object declaration.
	(Exp_Aggr.Convert_Aggregate_In_Obj_Decl): For a type that does
	not require a transient scope, capture the assignment statements
	in a block so that they can be moved down after elaboration of
	an address clause if needed.
	(Sem_Ch13.Check_Constant_Address_Clause.Check_Expr_Constants,
	case N_Unchecked_Conversion): Do not replace operand subtype with
	its base type as this violates a GIGI invariant if the operand
	is an identifier (in which case the etype of the identifier
	is expected to be equal to that of the denoted entity).

2013-01-03  Javier Miranda  <miranda@adacore.com>

	* sem_util.ads, sem_util.adb (Denotes_Same_Object): Extend the
	functionality of this routine to cover cases described in the Ada 2012
	reference manual.

2013-01-03  Ed Schonberg  <schonberg@adacore.com>

	* sem_elab.adb (Set_Elaboration_Constraint): Handle properly
	a 'Access attribute reference when the subprogram is called
	Initialize.

2013-01-03  Arnaud Charlet  <charlet@adacore.com>

	* s-tpobop.adb (PO_Do_Or_Queue): Refine assertion, since a
	select statement may be called from a controlled (e.g. Initialize)
	operation and have abort always deferred.

2013-01-03  Robert Dewar  <dewar@adacore.com>

	* sem_ch8.adb, einfo.ads, einfo.adb: Minor code reorganization.

2013-01-03  Javier Miranda  <miranda@adacore.com>

	* exp_ch3.adb (Make_Controlling_Function_Wrappers): Exclude
	internal entities associated with interfaces and add minimum
	decoration to the defining entity of the generated wrapper to
	allow overriding interface primitives.
	* sem_disp.ads (Override_Dispatching_Operation): Addition of a
	new formal (Is_Wrapper).
	* sem_disp.adb (Override_Dispatching_Operation): When overriding
	interface primitives the new formal helps identifying that the
	new operation is not fully decorated.

2013-01-03  Thomas Quinot  <quinot@adacore.com>

	* sem_ch7.adb, sem_ch10.adb, einfo.adb, einfo.ads, sem_ch12.adb,
	rtsfind.adb, sem_elab.adb, sem_ch4.adb, sem_ch8.adb
	(Einfo.Is_Visible_Child_Unit, Einfo.Set_Is_Visible_Child_Unit):
	Rename to Is_Visible_Lib_Unit, Set_Is_Visible_Lib_Unit, and
	update spec accordingly (now also applies to root library units).
	(Sem_Ch10.Analyze_Subunit.Analyze_Subunit_Context): Toggle above flag
	on root library units, not only child units.
	(Sem_Ch10.Install[_Limited]_Withed_Unit): Same.
	(Sem_Ch10.Remove_Unit_From_Visibility): Reset Is_Visible_Lib_Unit
	even for root library units.
	(Sem_Ch8.Find_Expanded_Name): A selected component form whose prefix is
	Standard is an expanded name for a root library unit.

2013-01-03  Thomas Quinot  <quinot@adacore.com>

	* exp_ch3.adb: Minor reformatting.

2013-01-03  Olivier Hainque  <hainque@adacore.com>

	* tracebak.c: Reinstate changes to support ppc-lynx178.

2013-01-03  Ed Schonberg  <schonberg@adacore.com>

	* atree.ads: Minor reformatting and documentation enhancement.

2013-01-03  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch3.adb (Expand_N_Object_Declaration): If the object has
	a class-wide type and a renaming declaration is created for it,
	preserve entity chain, which already contains generated internal
	types. This ensures that freezing actions are properly generated
	for all objects declared subsequently in the same scope, and
	that debugging information is generated for them.
	* sem_util.adb, sem_util.ads (we): New debugging routine, to
	display entity chain of a given scope.

2013-01-03  Robert Dewar  <dewar@adacore.com>

	* exp_intr.adb: Minor reformatting.

2013-01-03  Robert Dewar  <dewar@adacore.com>

	* einfo.adb: Minor reformatting.

2013-01-03  Pascal Obry  <obry@adacore.com>

	* adaint.c, adaint.h (__gnat_get_module_name): Removed.
	(__gnat_is_module_name_supported): Removed.
	* s-win32.ads: Add some needed definitions.
	* g-trasym.ads: Update comments.

2013-01-03  Robert Dewar  <dewar@adacore.com>

	* layout.adb (Set_Composite_Alignment): Fix problems of
	interactions with Optimize_Alignment set to Space.

2013-01-03  Thomas Quinot  <quinot@adacore.com>

	* exp_disp.adb: Minor reformatting.

2013-01-02  Richard Biener  <rguenther@suse.de>

	PR bootstrap/55784
	* gcc-interface/Makefile.in: Add $(GMPINC) to includes.

2013-01-02  Thomas Quinot  <quinot@adacore.com>

	* exp_intr.adb (Expand_Dispatching_Constructor_Call): Remove
	side effects from Tag_Arg early, doing it too late may cause a
	crash due to inconsistent Parent link.
	* sem_ch8.adb, einfo.ads: Minor reformatting.

2013-01-02  Robert Dewar  <dewar@adacore.com>

	* einfo.ads, einfo.adb (Has_Independent_Components): New flag.
	* freeze.adb (Size_Known): We do not know the size of a packed
	record if it has atomic components, by reference type components,
	or independent components.
	* sem_prag.adb (Analyze_Pragma, case Independent_Components): Set new
	flag Has_Independent_Components.

2013-01-02  Yannick Moy  <moy@adacore.com>

	* opt.ads (Warn_On_Suspicious_Contract): Set to True by default.
	* usage.adb (Usage): Update usage message.

2013-01-02  Pascal Obry  <obry@adacore.com>

	* adaint.c (__gnat_is_module_name_supported): New constant.

2013-01-02  Ed Schonberg  <schonberg@adacore.com>

	* sem_attr.adb (Check_Array_Type): Reject an attribute reference on an
	array whose component type does not have a completion.

2013-01-02  Geert Bosch  <bosch@adacore.com>

	* a-nllcef.ads, a-nlcefu.ads, a-nscefu.ads: Make Pure.

2013-01-02  Robert Dewar  <dewar@adacore.com>

	* par_sco.adb: Minor reformatting.

2013-01-02  Javier Miranda  <miranda@adacore.com>

	* sem_aggr.adb (Resolve_Array_Aggregate): Remove dead code.

2013-01-02  Olivier Hainque  <hainque@adacore.com>

	* a-exctra.ads (Get_PC): New function.

2013-01-02  Thomas Quinot  <quinot@adacore.com>

	* sem_ch8.adb: Minor reformatting.

2013-01-02  Thomas Quinot  <quinot@adacore.com>

	* sem_ch7.adb: Minor reformatting.

2013-01-02  Thomas Quinot  <quinot@adacore.com>

	* freeze.adb (Check_Component_Storage_Order): Do not crash on
	_Tag component.

2013-01-02  Robert Dewar  <dewar@adacore.com>

	* gnat1drv.adb, targparm.adb, targparm.ads: Minor name change: add
	On_Target to Atomic_Sync_Default.

2013-01-02  Robert Dewar  <dewar@adacore.com>

	* sem_warn.adb (Warn_On_Known_Condition): Suppress warning for
	comparison of attribute result with constant
	* a-ststio.adb, s-direio.adb, s-rannum.adb: Remove unnecessary pragma
	Warnings (Off, "..");

2013-01-02  Yannick Moy  <moy@adacore.com>

	* sem_prag.ads: Minor correction of comment.

2013-01-02  Thomas Quinot  <quinot@adacore.com>

	* par_sco.adb (Traverse_Package_Declaration): The first
	declaration in a nested package is dominated by the preceding
	declaration in the enclosing scope.

2013-01-02  Pascal Obry  <obry@adacore.com>

	* adaint.c, adaint.h (__gnat_get_module_name): Return the actual
	module containing a given address.

2013-01-02  Thomas Quinot  <quinot@adacore.com>

	* sem_ch3.adb: Minor reformatting.

2013-01-02  Pascal Obry  <obry@adacore.com>

	* cstreams.c (__gnat_ftell64): New routine. Use _ftelli64 on
	Win64 and default to ftell on other platforms.
	(__gnat_fsek64): Likewise.
	* i-cstrea.ads: Add fssek64 and ftell64 specs.
	* s-crtl.ads: Likewise.
	* a-ststio.adb, s-direio.adb (Size): Use 64 bits version when required.
	(Set_Position): Likewise.

2013-01-02  Thomas Quinot  <quinot@adacore.com>

	* par_sco.adb: Generate X SCOs for default expressions in
	subprogram body stubs.	Do not generate any SCO for package,
	task, or protected body stubs.

2013-01-02  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch3.adb: Further improvement to ASIS mode for anonymous
	access to protected subprograms.

2013-01-02  Robert Dewar  <dewar@adacore.com>

	* par_sco.adb, vms_data.ads: Minor reformatting.

2013-01-02  Thomas Quinot  <quinot@adacore.com>

	* par_sco.adb (Traverse_Declarations_Or_Statement): Function
	form, returning value of Current_Dominant upon exit, for chaining
	purposes.
	(Traverse_Declarations_Or_Statement.Traverse_One, case
	N_Block_Statement): First statement is dominated by last declaration.
	(Traverse_Subprogram_Or_Task_Body): Ditto.
	(Traverse_Package_Declaration): First private
	declaration is dominated by last visible declaration.
	(Traverse_Sync_Definition): Ditto.

2013-01-02  Thomas Quinot  <quinot@adacore.com>

	* gnat_rm.texi: Restrict the requirement for Scalar_Storage_Order
	matching Bit_Order to record types only, since array types do not
	have a Bit_Order.

2013-01-02  Vincent Celier  <celier@adacore.com>

	* gnat_ugn.texi: Remove documentation of -gnateO, which is an
	internal switch.
	* usage.adb: Indicate that -gnateO is an internal switch.

2013-01-02  Thomas Quinot  <quinot@adacore.com>

	* par_sco.adb: Add SCO generation for task types and single
	task declarations.
	* get_scos.adb: When adding an instance table entry for a
	non-nested instantiation, make sure the Enclosing_Instance is
	correctly set to 0.

2013-01-02  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_attr.adb (Analyze_Attribute): Skip the special _Parent
	scope generated for subprogram inlining purposes while trying
	to locate the enclosing function.
	* sem_prag.adb (Analyze_Pragma): Preanalyze the boolean
	expression of pragma Postcondition when the pragma comes from
	source and appears inside a subprogram body.

2013-01-02  Thomas Quinot  <quinot@adacore.com>

	* switch-c.adb, fe.h, back_end.adb: Enable generation of instantiation
	information in debug info unconditionally when using -fdump-scos,
	instead of relying on a separate command line switch -fdebug-instances.
	* gcc-interface/Make-lang.in: Update dependencies.

2013-01-02  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch12.adb: Additional refinement of predicate.

2013-01-02  Vincent Celier  <celier@adacore.com>

	* vms_data.ads: Remove incorrect spaces at end of descriptions
	of qualifiers for single switch.

2013-01-02  Ben Brosgol  <brosgol@adacore.com>

	* gnat_rm.texi: Minor edits / wordsmithing in section on pragma
	Check_Float_Overflow.

2013-01-02  Thomas Quinot  <quinot@adacore.com>

	* sprint.adb (Sprint_Node_Actual): Do not add extra parens for
	a conditional expression (CASE or IF expression) that already
	has parens. Also omit ELSE keyword for an IF expression without
	an ELSE part.

2013-01-02  Thomas Quinot  <quinot@adacore.com>

	* gnat1drv.adb (Adjust_Global_Switches): Adjust back-end
	flag_debug_instances here, after front-end switches have been
	processed.

2013-01-02  Vincent Celier  <celier@adacore.com>

	* usage.adb: Minor reformatting.

2013-01-02  Arnaud Charlet  <charlet@adacore.com>

	* opt.ads: Fix typo.

2013-01-02  Thomas Quinot  <quinot@adacore.com>

	* par_sco.adb: Generate P decision SCOs for SPARK pragmas
	Assume and Loop_Invariant.

2013-01-02  Robert Dewar  <dewar@adacore.com>

	* vms_data.ads: Add entry for Float_Check_Valid (-gnateF).
	* ug_words: Add entry for Float_Check_Overflow.
	* usage.adb: Minor reformatting.
	* gnat_ugn.texi: Add documentation for -gnateF (Check_Float_Overflow).

2013-01-02  Vincent Celier  <celier@adacore.com>

	* gnat_ugn.texi: Add documentation for switches -gnateA, -gnated,
	-gnateO=, -gnatet and -gnateV.
	* ug_words: Add qualifiers equivalent to -gnateA, -gnated,
	-gnatet and -gnateV.
	* usage.adb: Add lines for -gnatea, -gnateO and -gnatez.
	* vms_data.ads: Add new compiler qualifiers /ALIASING_CHECK
	(-gnateA), /DISABLE_ATOMIC_SYNCHRONIZATION (-gnated),
	/PARAMETER_VALIDITY_CHECK (-gnateV) and /TARGET_DEPENDENT_INFO
	(-gnatet).

2013-01-02  Robert Dewar  <dewar@adacore.com>

	* checks.adb (Apply_Scalar_Range_Check): Implement Check_Float_Overflow.
	* opt.ads, opt.adb: Handle flags Check_Float_Overflow[_Config].
	* par-prag.adb: Add dummy entry for pragma Check_Float_Overflow.
	* sem_prag.adb: Implement pragma Check_Float_Overflow.
	* snames.ads-tmpl: Add entries for pragma Check_Float_Overflow.
	* switch-c.adb: Recognize -gnateF switch.
	* tree_io.ads: Update ASIS version number.
	* gnat_rm.texi: Add documentation of pragma Check_Float_Overflow.

2013-01-02  Robert Dewar  <dewar@adacore.com>

	* checks.adb, exp_ch4.adb, exp_ch6.adb, exp_ch7.adb, exp_ch9.adb,
	exp_disp.adb, exp_dist.adb, exp_intr.adb, exp_prag.adb, exp_util.adb,
	freeze.adb, gnat1drv.adb, inline.adb, layout.adb, lib-xref.adb,
	par-ch10.adb, par-labl.adb, par-load.adb, par-util.adb, restrict.adb,
	sem_ch13.adb, sem_ch4.adb, sem_ch6.adb, sem_dim.adb, sem_elab.adb,
	sem_res.adb, sem_warn.adb, sinput-l.adb: Add tags to warning messages.
	* sem_ch6.ads, warnsw.ads, opt.ads: Minor comment updates.

2013-01-02  Robert Dewar  <dewar@adacore.com>

	* err_vars.ads: Minor comment fix.

2013-01-02  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch12.adb: Refine predicate.

2013-01-02  Robert Dewar  <dewar@adacore.com>

	* errout.ads: Minor comment fixes.
	* opt.ads: Minor comment additions.
	* exp_aggr.adb: Add tags to warning messages
	* exp_ch11.adb, exp_ch3.adb, exp_ch4.adb, exp_util.adb, sem_aggr.adb,
	sem_attr.adb, sem_case.adb, sem_cat.adb, sem_ch3.adb, sem_ch4.adb,
	sem_ch5.adb, sem_disp.adb, sem_dist.adb, sem_elab.adb, sem_eval.adb,
	sem_intr.adb, sem_mech.adb, sem_prag.adb, sem_res.adb, sem_util.adb,
	sem_warn.adb: Add tags to warning messages

2013-01-02  Doug Rupp  <rupp@adacore.com>

	* init.c [VMS] Remove subtest on reason mask for ACCVIO that is a C_E.

2013-01-02  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch12.adb: Recover source name for renamed packagea.

2013-01-02  Robert Dewar  <dewar@adacore.com>

	* errout.adb (Set_Msg_Insertion_Warning): Correct typo causing
	tests to fail if insertion sequence is at end of message string.
	* opt.ads: Minor comment fixes and additions.
	* sem_ch7.adb, sem_ch8.adb, sem_ch9.adb, sem_ch10.adb, sem_ch11.adb,
	sem_ch12.adb, sem_ch13.adb: Add tags to warning messages.
	* sem_ch6.ads, sem_ch6.adb (Cannot_Inline): Deal with warning message
	tags. Add tags to warning messages.

2013-01-02  Robert Dewar  <dewar@adacore.com>

	* err_vars.ads (Warning_Doc_Switch): New flag.
	* errout.adb (Error_Msg_Internal): Implement new warning flag
	doc tag stuff (Set_Msg_Insertion_Warning): New procedure.
	* errout.ads: Document new insertion sequences ?? ?x? ?.x?
	* erroutc.adb (Output_Msg_Text): Handle ?? and ?x? warning doc
	tag stuff.
	* erroutc.ads (Warning_Msg_Char): New variable.
	(Warn_Chr): New field in error message object.
	* errutil.adb (Error_Msg): Set Warn_Chr in error message object.
	* sem_ch13.adb: Minor reformatting.
	* warnsw.adb: Add handling for -gnatw.d and -gnatw.D
	(Warning_Doc_Switch).
	* warnsw.ads: Add handling of -gnatw.d/.D switches (warning
	doc tag).

2013-01-02  Robert Dewar  <dewar@adacore.com>

	* opt.ads: Minor reformatting.

2013-01-02  Doug Rupp  <rupp@adacore.com>

	* init.c: Reorganize VMS section.
	(scan_condtions): New function for scanning condition tables.
	(__gnat_handle_vms_condtion): Use actual exception name for imported
	exceptions vice IMPORTED_EXCEPTION.
	Move condition table scanning into separate function. Move formerly
	special handled conditions to system condition table. Use SYS$PUTMSG
	output to fill exception message field for formally special handled
	condtions, in particular HPARITH to provide more clues about cause and
	location then raised from the translated image.

2013-01-02  Thomas Quinot  <quinot@adacore.com>

	* sem_ch13.adb (Analyze_Aspect_Specifications): For a Pre/Post
	aspect that applies to a library subprogram, prepend corresponding
	pragma to the Pragmas_After list, in order for split AND THEN
	sections to be processed in the expected order.

2013-01-02  Thomas Quinot  <quinot@adacore.com>

	* exp_prag.adb (Expand_Pragma_Check): The statements generated
	for the pragma must have the sloc of the pragma, not the
	sloc of the condition, otherwise this creates anomalies in the
	generated debug information that confuse coverage analysis tools.

2013-01-02  Thomas Quinot  <quinot@adacore.com>

	* sem_ch13.adb: Minor reformatting.

2013-01-02  Arnaud Charlet  <charlet@adacore.com>

	* g-excact.ads (Core_Dump): Clarify that this subprogram does
	not dump cores under Windows.

2013-01-02  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch8.adb (Analyze_Primitive_Renamed_Operation): The prefixed
	view of a subprogram has convention Intrnnsic, and a renaming
	of a prefixed view cannot be the prefix of an Access attribute.

2013-01-02  Robert Dewar  <dewar@adacore.com>

	* restrict.adb: Minor reformatting.

2013-01-02  Thomas Quinot  <quinot@adacore.com>

	* exp_prag.adb: Minor reformatting.

2013-01-02  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch12.adb (Get_Associated_Node): If the node is an
	identifier that denotes an unconstrained array in an object
	declaration, it is rewritten as the name of an anonymous
	subtype whose bounds are given by the initial expression in the
	declaration. When checking whether that identifier is global
	reference, use the original node, not the local generated subtype.

2013-01-02  Olivier Hainque  <hainque@adacore.com>

	* tracebak.c: Revert previous change, incomplete.

2013-01-02  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch13.adb (Analyze_Aspect_Specifications): If the aspect
	appears on a subprogram body that acts as a spec, place the
	corresponding pragma in the declarations of the body, so that
	e.g. pre/postcondition checks can be generated appropriately.

2013-01-02  Robert Dewar  <dewar@adacore.com>

	* sem_ch3.adb: Minor reformatting and code reorganization.

2013-01-02  Vincent Celier  <celier@adacore.com>

	* switch-m.adb (Normalize_Compiler_Switches): Record the
	complete switch -fstack-check=specific instead of its shorter
	alias -fstack-check.

2013-01-02  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch3.adb (Derive_Subprogram): Enforce RM 6.3.1 (8):
	if the derived type is a tagged generic formal type with
	unknown discriminants, the inherited operation has convention
	Intrinsic. As such, the 'Access attribute cannot be applied to it.

2013-01-02  Thomas Quinot  <quinot@adacore.com>

	* sem_attr.adb: Minor reformatting.

2013-01-02  Thomas Quinot  <quinot@adacore.com>

	* par_sco.adb: Add SCO generation for S of protected types and
	single protected object declarations.

2013-01-02  Robert Dewar  <dewar@adacore.com>

	* sem_eval.adb, osint.ads: Minor reformatting.

2013-01-02  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Analyze_Pragma): Check the legality of pragma Assume.

2013-01-02  Thomas Quinot  <quinot@adacore.com>

	* sem_eval.adb (Compile_Time_Compare): For static operands, we
	can perform a compile time comparison even if in preanalysis mode.

2013-01-02  Thomas Quinot  <quinot@adacore.com>

	* par_sco.adb (SCO_Record): Always use
	Traverse_Declarations_Or_Statements to process the library level
	declaration, so that SCOs are properly generated for its aspects.

2013-01-02  Thomas Quinot  <quinot@adacore.com>

	* scos.ads (In_Decision): Add missing entry for 'a'.
	* sem_prag.adb (Analyze_Pragma, case pragma Check): Omit
	call to Set_SCO_Pragma_Enabled for Invariant and Predicate.
	* sem_ch13.adb: Minor comment update.

Copyright (C) 2013 Free Software Foundation, Inc.

Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved.
