Metadata-Version: 1.1
Name: congress
Version: 5.0.0.0b3
Summary: Congress: The open policy framework for the cloud.
Home-page: http://docs.openstack.org/developer/congress/
Author: OpenStack
Author-email: openstack-dev@lists.openstack.org
License: UNKNOWN
Description: ========================
        Team and repository tags
        ========================
        
        .. image:: http://governance.openstack.org/badges/congress.svg
            :target: http://governance.openstack.org/reference/tags/index.html
        
        .. Change things from this point on
        
        .. include:: aliases.rst
        
        .. _readme:
        
        ======================================
        Congress Introduction and Installation
        ======================================
        
        1. What is Congress
        ===================
        
        Congress is an open policy framework for the cloud.  With Congress, a
        cloud operator can declare, monitor, enforce, and audit "policy" in a
        heterogeneous cloud environment.  Congress gets inputs from a cloud's
        various cloud services; for example in OpenStack, Congress fetches
        information about VMs from Nova, and network state from Neutron, etc.
        Congress then feeds input data from those services into its policy engine
        where Congress verifies that the cloud's actual state abides by the cloud
        operator's policies.  Congress is designed to work with **any policy** and
        **any cloud service**.
        
        2. Why is Policy Important
        ==========================
        
        The cloud is a collection of autonomous
        services that constantly change the state of the cloud, and it can be
        challenging for the cloud operator to know whether the cloud is even
        configured correctly.  For example,
        
        * The services are often independent from each other and do not
          support transactional consistency across services, so a cloud
          management system can change one service (create a VM) without also
          making a necessary change to another service (attach the VM to a
          network).  This can lead to incorrect behavior.
        
        * Other times, we have seen a cloud operator allocate cloud resources
          and then forget to clean them up when the resources are no longer in
          use, effectively leaving garbage around the system and wasting
          resources.
        
        * The desired cloud state can also change over time.  For example, if
          a security vulnerability is discovered in Linux version X, then all
          machines with version X that were ok in the past are now in an
          undesirable state.  A version number policy would detect all the
          machines in that undesirable state.  This is a trivial example, but
          the more complex the policy, the more helpful a policy system
          becomes.
        
        Congress's job is to help people manage that plethora of state across
        all cloud services with a succinct policy language.
        
        3. Using Congress
        =================
        
        Setting up Congress involves writing policies and configuring Congress
        to fetch input data from the cloud services.  The cloud operator
        writes policy in the Congress policy language, which receives input
        from the cloud services in the form of tables.  The language itself
        resembles datalog.  For more detail about the policy language and data
        format see :ref:`Policy <policy>`.
        
        To add a service as an input data source, the cloud operator configures a Congress
        "driver," and the driver queries the service.  Congress already
        has drivers for several types of service, but if a cloud operator
        needs to use an unsupported service, she can write a new driver
        without much effort and probably contribute the driver to the
        Congress project so that no one else needs to write the same driver.
        
        Finally, when using Congress, the cloud operator must choose what
        Congress should do with the policy it has been given:
        
        * **monitoring**: detect violations of policy and provide a list of those violations
        * **proactive enforcement**: prevent violations before they happen (functionality that requires
          other services to consult with Congress before making changes)
        * **reactive enforcement**: correct violations after they happen (a manual process that
          Congress tries to simplify)
        
        In the future, Congress
        will also help the cloud operator audit policy (analyze the history
        of policy and policy violations).
        
        Congress is free software and is licensed with Apache.
        
        * Free software: Apache license
        
        4. Installing Congress
        ======================
        
        There are 2 ways to install Congress.
        
        * As part of DevStack.  Get Congress running alongside other OpenStack services like Nova
          and Neutron, all on a single machine.  This is a great way to try out Congress for the
          first time.
        
        * Separate install.  Get Congress running alongside an existing OpenStack
          deployment
        
        4.1 Devstack-install
        --------------------
        For integrating Congress with DevStack:
        
        1. Download DevStack
        
        .. code-block:: console
        
            $ git clone https://git.openstack.org/openstack-dev/devstack.git
            $ cd devstack
        
        2. Configure DevStack to use Congress and any other service you want.  To do that, modify
           the ``local.conf`` file (inside the DevStack directory).  Here is what
           our file looks like:
        
        .. code-block:: console
        
            [[local|localrc]]
        
            enable_plugin congress http://git.openstack.org/openstack/congress
            enable_plugin heat http://git.openstack.org/openstack/heat
            enable_plugin aodh http://git.openstack.org/openstack/aodh
            enable_plugin ceilometer http://git.openstack.org/openstack/ceilometer
            enable_service s-proxy s-object s-container s-account
        
        3. Run ``stack.sh``.  The default configuration expects the passwords to be 'password'
           without the quotes
        
        .. code-block:: console
        
            $ ./stack.sh
        
        
        4.2 Separate install
        --------------------
        Install the following software, if you haven't already.
        
        * python 2.7: https://www.python.org/download/releases/2.7/
        
        * pip: https://pip.pypa.io/en/latest/installing.html
        
        * java: http://java.com  (any reasonably current version should work)
          On Ubuntu:   console apt-get install default-jre
        
        * Additionally
        
        .. code-block:: console
        
          $ sudo apt-get install git gcc python-dev libxml2 libxslt1-dev libzip-dev mysql-server python-mysqldb build-essential libssl-dev libffi-dev
        
        Clone Congress
        
        .. code-block:: console
        
          $ git clone https://github.com/openstack/congress.git
          $ cd congress
        
        Install requirements
        
        .. code-block:: console
        
         $ sudo pip install .
        
        Install Source code
        
        .. code-block:: console
        
          $ sudo python setup.py install
        
        Configure Congress  (Assume you put config files in /etc/congress)
        
        .. code-block:: console
        
          $ sudo mkdir -p /etc/congress
          $ sudo mkdir -p /etc/congress/snapshot
          $ sudo cp etc/api-paste.ini /etc/congress
          $ sudo cp etc/policy.json /etc/congress
          $ sudo touch /etc/congress/congress.conf
        
        
        Add drivers in /etc/congress/congress.conf [DEFAULT] section:
        
        .. code-block:: text
        
          drivers = congress.datasources.neutronv2_driver.NeutronV2Driver,congress.datasources.glancev2_driver.GlanceV2Driver,congress.datasources.nova_driver.NovaDriver,congress.datasources.keystone_driver.KeystoneDriver,congress.datasources.ceilometer_driver.CeilometerDriver,congress.datasources.cinder_driver.CinderDriver,congress.datasources.swift_driver.SwiftDriver,congress.datasources.plexxi_driver.PlexxiDriver,congress.datasources.vCenter_driver.VCenterDriver,congress.datasources.murano_driver.MuranoDriver,congress.datasources.ironic_driver.IronicDriver
        
        
        Modify [keystone_authtoken] and [database] according to your environment.
        
        For setting Congress with "noauth":
        Add the following line to [DEFAULT] section in /etc/congress/congress.conf
        
        .. code-block:: text
        
            auth_strategy = noauth
        
        Also, might want to delete/comment [keystone_authtoken] section in
         /etc/congress/congress.conf
        
        To use RabbitMQ with Congress,
        Set the transport_url in [DEFAULT] section in /etc/congress/congress.conf according to your setup.
        
        .. code-block:: text
        
            transport_url = rabbit://$RABBIT_USERID:$RABBIT_PASSWORD@$RABBIT_HOST:5672
        
        A bare-bones congress.conf is as follows (adapt MySQL root password):
        
        .. code-block:: text
        
          [DEFAULT]
          drivers = congress.datasources.neutronv2_driver.NeutronV2Driver,congress.datasources.glancev2_driver.GlanceV2Driver,congress.datasources.nova_driver.NovaDriver,congress.datasources.keystone_driver.KeystoneDriver,congress.datasources.ceilometer_driver.CeilometerDriver,congress.datasources.cinder_driver.CinderDriver,congress.datasources.swift_driver.SwiftDriver,congress.datasources.plexxi_driver.PlexxiDriver,congress.datasources.vCenter_driver.VCenterDriver,congress.datasources.murano_driver.MuranoDriver,congress.datasources.ironic_driver.IronicDriver
          auth_strategy = noauth
          [database]
          connection = mysql+pymysql://root:password@127.0.0.1/congress?charset=utf8
        
        For a detailed sample, please follow README-congress.conf.txt
        
        Create database
        
        .. code-block:: console
        
          $ mysql -u root -p
          $ mysql> CREATE DATABASE congress;
          $ mysql> GRANT ALL PRIVILEGES ON congress.* TO 'congress'@'localhost' IDENTIFIED BY 'CONGRESS_DBPASS';
          $ mysql> GRANT ALL PRIVILEGES ON congress.* TO 'congress'@'%' IDENTIFIED BY 'CONGRESS_DBPASS';
        
        
        Configure congress.conf with db information.
        
        Push down schema
        
        .. code-block:: console
        
          $ sudo congress-db-manage --config-file /etc/congress/congress.conf upgrade head
        
        Set up Congress accounts
          Use your OpenStack RC file to set and export required environment variables:
          OS_USERNAME, OS_PASSWORD, OS_PROJECT_NAME, OS_TENANT_NAME, OS_AUTH_URL.
        
          (Adapt parameters according to your environment)
        
        .. code-block:: console
        
          $ ADMIN_ROLE=$(openstack role list | awk "/ admin / { print \$2 }")
          $ SERVICE_TENANT=$(openstack project list | awk "/ service / { print \$2 }")
          $ CONGRESS_USER=$(openstack user create --password password --project service --email "congress@example.com" congress | awk "/ id / {print \$4 }")
          $ openstack role add $ADMIN_ROLE --user $CONGRESS_USER --project  $SERVICE_TENANT
          $ CONGRESS_SERVICE=$(openstack service create policy --name congress --description "Congress Service" | awk "/ id / { print \$4 }")
          $ openstack endpoint create $CONGRESS_SERVICE --region RegionOne --publicurl http://127.0.0.1:1789/  --adminurl http://127.0.0.1:1789/ --internalurl http://127.0.0.1:1789/
        
        Start Congress
          The default behavior is to start the Congress API, Policy Engine, and
          Datasource in a single node. For HAHT deployment options, please see the
          :ref:`HA Overview <ha_overview>` document.
        
        .. code-block:: console
        
          $ sudo /usr/local/bin/congress-server --debug
        
        Configure datasource drivers
          First make sure you have the Congress client (project python-congressclient)
          installed. Run this command for every service that Congress will poll for
          data. Please note that the service name $SERVICE should match the ID of the
          datasource driver, e.g. "neutronv2" for Neutron and "glancev2" for Glance;
          $OS_USERNAME, $OS_TENANT_NAME, $OS_PASSWORD and $SERVICE_HOST are used to
          configure the related datasource driver so that congress knows how to
          talk with the service.
        
        .. code-block:: console
        
          $ openstack congress datasource create $SERVICE "$SERVICE" --config username=$OS_USERNAME --config tenant_name=$OS_TENANT_NAME --config password=$OS_PASSWORD --config auth_url=http://$SERVICE_HOST:5000/v2.0
        
        
        Install test harness
        
        .. code-block:: console
        
          $ sudo pip install 'tox<1.7'
        
        Run unit tests
        
        .. code-block:: console
        
          $ tox -epy27
        
        Read the HTML documentation
          Install python-sphinx and the oslosphinx extension if missing.
        
        .. code-block:: console
        
          $ sudo pip install sphinx
          $ sudo pip install oslosphinx
        
          Build the docs
        
        .. code-block:: console
        
          $ make docs
        
          Open doc/html/index.html in a browser
        
        4.3 Debugging unit tests
        ------------------------
        
        In order to break into the debugger from a unit test we need to insert
        a breaking point to the code:
        
        .. code-block:: python
        
          import pdb; pdb.set_trace()
        
        Then run ``tox`` with the debug environment as one of the following::
        
          tox -e debug
          tox -e debug test_file_name.TestClass.test_name
        
        For more information see the `oslotest documentation
        <http://docs.openstack.org/developer/oslotest/features.html#debugging-with-oslo-debug-helper>`_.
        
        4.4 Upgrade
        -----------
        
        Here are the instructions for upgrading to a new release of the
        Congress server.
        
        1. Stop the Congress server.
        
        2. Update the Congress git repo
        
        .. code-block:: console
        
          $ cd /path/to/congress
          $ git fetch origin
        
        3. Checkout the release you are interested in, say Mitaka.  Note that this
        step will not succeed if you have any uncommitted changes in the repo.
        
        .. code-block:: console
        
          $ git checkout origin/stable/mitaka
        
        
        If you have changes committed locally that are not merged into the public
        repository, you now need to cherry-pick those changes onto the new
        branch.
        
        4. Install dependencies
        
        .. code-block:: console
        
         $ sudo pip install
        
        5. Install source code
        
        .. code-block:: console
        
          $ sudo python setup.py install
        
        6. Migrate the database schema
        
        .. code-block:: console
        
          $ sudo congress-db-manage --config-file /etc/congress/congress.conf upgrade head
        
        7. (optional) Check if the configuration options you are currently using are
           still supported and whether there are any new configuration options you
           would like to use.  To see the current list of configuration options,
           use the following command, which will create a sample configuration file
           in ``etc/congress.conf.sample`` for you to examine.
        
        .. code-block:: console
        
           $ tox -egenconfig
        
        8. Restart Congress, e.g.
        
        .. code-block:: console
        
          $ sudo /usr/local/bin/congress-server --debug
        
        
Platform: UNKNOWN
Classifier: Environment :: OpenStack
Classifier: Intended Audience :: Information Technology
Classifier: Intended Audience :: System Administrators
Classifier: License :: OSI Approved :: Apache Software License
Classifier: Operating System :: POSIX :: Linux
Classifier: Programming Language :: Python
Classifier: Programming Language :: Python :: 2
Classifier: Programming Language :: Python :: 2.7
Classifier: Programming Language :: Python :: 3
Classifier: Programming Language :: Python :: 3.4
Classifier: Programming Language :: Python :: 3.5
